Used Temporary Structure for sale (2,923)

Condition: used, Year of construction: 2014, operating hours: 2,149 h, 2014 | Hamm HD150TT PNEUMATIC 8 WHEEL COMPACTOR (accident unit - for parts only) | Used Other Roller | 2149 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Kjdoya E Iropfx Ah Nell 💰 Buy Now for EUR 19500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 42 inspection points 25 approved ✅ 11 imperfect ℹ️ 6 issues ⚠️ 📌 Inspector's Comment: This pneumatic rubber tyre Hamm roller had an accident and fell on its side. The machine was still running for a while after tipping, therefore the engine has been damaged, since it was running for a short time without sufficient oil circulation. The engine needs to be checked to assess the damages. The engine oil has been drained due to a leak behind the hydraulic pump, leakage being caused by the machine tipped on its side. The cabin and ROPS structure are broken at several places and need to be replaced. All operational levers and switches are OK, only the cab has been distorted, the front and rear tires are OK, the front tires need air for transport and the engine needs attention or even a replacement in the worst case scenario. Overall the machine, except for the cabin structure and the engine, look good. No operations were tested during the inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40195 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, We offer 40HC insulated containers (non-operational refrigerated containers) in good condition, available from Hamburg – perfect for storage, transport, or temporary warehousing. OVERVIEW Kedpfx Ahsya E Dms Noll ✅ High-Cube Container (40 HC) – extra height for increased volume • External dimensions: 12,192 × 2,438 × 2,896 mm • Internal dimensions: 12,032 × 2,352 × 2,695 mm ✅ Sample pictures shown (original photos not available) DELIVERY AND AVAILABILITY ✅ Immediately available: The containers can be picked up or delivered at short notice. ✅ Delivery options: Depending on your location, we organize a reliable transport solution; we are happy to clarify delivery dates and terms in advance. CONTACT ✅ Interested? Get in touch directly to reserve your allocation and receive a tailored quote including tiered pricing, delivery date, and further details. ✅ We look forward to your inquiry and are available for any questions at any time. MAGITU GmbH

Year of construction: 2025, condition: new, functionality: fully functional, COLUMBUS 360° - MOVE | Mobile vacuum press 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts). MOVE — the high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. With extensive flexibility, due to absolute mobility and revolutionary folding mechanism, to reduce the floor space to 45 % when folded. Technology: Membrane fast-change system Gas springs for flap opening Highly elastic natural rubber membrane (up to +130 °C) Stable phenolic resin worktop (up to +120 °C), glued 15 times 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER optional, automatic switch-off when pressure is reached (with large vacuum volume) Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge Connection for external vacuum bag Feet including smooth-running swivel castors FESTO pneumatics and SIEMENS electrics Technical data and dimensions: Usable area: approx. 3050 x 1350 mm Dimensions inside the frame: approx. 3130 x 1430 mm Overall dimensions: approx. 3700 x 1700 x 1100 mm Overall dimensions (folded): approx. 3700 x 770 x 1770 mm Electrical connection: 1~, 0,8/1,0 kW, 230 VAC +/- 10%, 50/60 Hz Weight: 670 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Kedjyax Aiepfx Ah Nsll Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT.

Year of construction: 2025, condition: new, COLUMBUS 360° - PIONEER Klsdpfx Ajyaxy Uoh Njl 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts), a high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT. The modular design allows the machine to be adapted to current needs. Available in 3 sizes from stock.

Year of construction: 2025, condition: new, COLUMBUS 360° - PIONEER BASIC | Vacuum press | Size L 1. Vacuum Press: A reliable base you can trust. The press is the technical core of the system. Built for generations: durable, robust, low-maintenance — backed by a lifetime warranty (excluding wear parts), a high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. Technology: Membrane fast-change system Gas springs for flap opening Highly elastic natural rubber membrane (up to +130 °C) Stable phenolic resin worktop (up to +120 °C), glued 15 times Kljdpfx Ajyaxyboh Nel 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER optional, automatic switch-off when pressure is reached (with large vacuum volume) Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge Connection for external vacuum bag Feet including smooth-running swivel castors FESTO pneumatics and SIEMENS electrics Electrical connection: 3~, 1,25 kW, 190-255/330-440 VAC, 50 Hz (3~, 1,5 kW, 190-290/330-500 VAC, 60 Hz) Dimensions: Usable area: approx. 3050 x 1350 mm Dimensions inside the frame: approx. 3130 x 1430 mm Max. workpiece height: approx. 600 mm Overall dimensions: approx. 3700 x 1640 x 1080 mm Weight: approx. 680 kg 2. Digital Master Manual: Expertise that builds confidence. More than a manual — it’s your daily companion. Over 50 years of concentrated experience, clearly structured and easy to apply. Ideal for both beginners and professionals. 3. Master GPT: Support that never sleeps. Whether operation, material selection, build-ups or process optimization — with AI support, you’re never on your own. Delivered with a ready-to-use tablet for instant access. Note: The number of queries allowed per day depends on your agreement with ChatGPT.

Condition: excellent (used), mileage: 66,596 km, power: 41.92 kW (57.00 HP), first registration: 01/1996, overall weight: 4,200 kg, maximum load weight: 1,800 kg, empty load weight: 2,400 kg, • Manufacturer: Kramer • Model: TSK500 • First registration: 01/1996 • Kilometers: 66,596km • Unladen weight: 2,400kg • Payload: 1,800kg • Perm. total weight: 4,200kg Kodpeumxuqefx Ah Noll • Power: 42kw/57HP • Sweeping machine • Minor electrical problem • Leaf blower • Multicar • Winter service • German vehicle • German documents • Ready for immediate use You also can have the description in another language by email • Our service: • • - Export declaration - customs registration - yellow temporary plates - red customs plates. • - Purchase of your used construction machine or commercial vehicle • - We help you with financing • - We offer you transport solutions • - Inspection and demonstration of the machines Mon-Fri 9:00 - 17:00 (Saturday by appointment only.) • • Our machine pool is constantly changing and always up to date on our website • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typing mistakes not excluded. - Sale according to our Terms & Conditions.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. Kedpfxoxb Uq Dj Ah Njll If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Kljdpsyalmbefx Ah Nsl Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: ready for operation (used), Year of construction: 1998, This ITALPRESSE DS 130 was manufactured in 1998. A robust veneer press featuring a motorized infeed table with a PVC belt and an automatic loading system for efficient panel handling. It boasts a maximum total lifting force of 110 tons and a heating plate size of 3500 x 1400 mm. Ideal for high-quality veneering processes. Contact us for more information about this machine. Additional equipment • Motorized infeed table with PVC belt • Motorized loading table for manual assembly of the panels and automatic loading into the press on the 3500 mm side • Heating plates made of solid steel, drilled and machined on all sides • Automatic loading and unloading of the panels on the 3500 mm side Machine Benefits Technical Machine Benefits • Maximum total lifting force: 110 tons • Opening: 140 mm Kedpsyall Refx Ah Njll • Power supply: 400 volt eu / 50 hz / 3 ph. + g • Electrical boiler for thermal oil: 18 kw • Devices for adjusting the working height for flatness on all uneven floors // devices for adjusting the belt tension and centering with foot switch • Construction made of assembled and welded fe430 steel beams • Cnc-machined structures for three-dimensional parallelism • Hydraulically controlled planarity with 4 racks and pinions • Protective nets and safety devices in accordance with ce regulations • Leveling devices at the base of columns for uneven floors Extra Information Refurbished - without warranty Control panel with electric pressure gauge, buttons, and control switches Lifting hooks for transport by crane

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis Coord3 ARES NT-L 10.7.5 CNC was manufactured in 2018. It features a high-precision RENISHAW PH20 motorized indexing probe head, RENISHAW UCC controller, and a robust aluminum alloy frame. The machine includes a black granite worktable with threaded holes for secure workpiece fixation. Ideal for detailed 3D measurements with a maximum speed of 500 mm/sec and acceleration of 1700 mm/sec². Contact us for further details regarding this machine. Additional equipment • Air-cooled drying system Ksdpfx Aheyaiz Nj Njll • CE compliance certification • Equipped with an air filter and regulator system • High-precision RSF optical scales and sensors Machine Benefits Technical Machine Benefits • Air cushion bearings for structure support and increased measurement accuracy • Pneumatic counterbalance for the vertical probe holder • Automatic fall protection for head in case of air outage • All geometric and measurement checks executed under stable temperature conditions (20°c) as per iso 10360/2 standards • Resolution: 0. 0001 mm • Measurement accuracy: iso 10360/2 mpee = 2. 1 + 3. 0l/1000 μm • Maximum speed in 3d measurement: 500 mm/sec • Acceleration in 3d measurement: 1700 mm/sec² Extra Information Control Unit RENISHAW UCC controller kit TouchDMIS measurement software DELL AIO computer with 24” LCD TouchScreen monitor Tools RENISHAW PH20 motorized probe head 3 RENISHAW TP20 magnetic probe modules RENISHAW TCR20 probe changer RENISHAW 23-piece stylus kit 25 mm diameter ceramic calibration sphere with certification Mount Position (Assembly) Machine frame made from aluminum alloy Slide surfaces hardened with a special process Black granite worktable with high wear resistance and threaded holes

Year of construction: 2004, condition: excellent (used), TECHNICAL DATA Travel X 760 mm travel Y 510 mm travel Z 610 mm table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm distance spindle to table min./max. 150/762 mm Spindle mounting steep taper DIN 69871 ISO 40 spindle speeds 10 - 10'000 rpm Drive power (30 min/const. ED) 11 kW Ksdpfx Asl Tpmdoh Nell Torque max. 236 Nm Power constant from 500 rpm Coolant tank 190 l Ball bearing linear guide in X,Y,Z axes Eilang X / Y / Z 30 / 30 / 20 feeds programmable 3,0 - 7600 mm/min positioning accuracy +/- 0,01 mm repeatability +/- 0,005 mm milling feed rate 3,0 - 11400 mm/min table load 1000 kg Automatic tool changer (double arm) 24 stations Max. Tool diameter 80 mm Max. tool length Tool length 300 mm Max. Tool weight 7 kg Machine weight 4700 kg Space requirement L x W x H (footprint) 3870 x 4170 x 2775 mmINCL. - Coolant system - Coolant spray gun - Chip splash guard cabin - Flushing system to support chip disposal - Machine light - set of machine shoes - rigid thread cutting - spiral conveyor in the chip room - Pocket milling with islands - Electronic handwheel - ULTIMAX 4 control - 2 VGA color screens (text + graphics) - 2 software units (1 x plain text dialog programming + 1 x for ISO code programming) via interface RS-232 C / V24 access for CAD / CAM or external programming station - Pentium technology, 1.6 GB hard disk, 64 MB RAM, parallel and serial data interfaces, DOS compatible 3.5 '' 1.44 MB drive. System internal self-diagnosis, DOS directory structure, software version 2.xx Servo technology DUAL DSP 40MHz

Condition: used, Year of construction: 2020, operating hours: 6,146 h, 2020 | JCB 540-180 (18m) | Used Telescopic Forklift | 6146 hours 📍Location: Estonia Klsdpfxoyacbce Ah Njl 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 52 inspection points 50 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition. Some sliders inside the boom structure where worn and have been recently replaced. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39836 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2023, total height: 2,812 mm, overall weight: 6,850 kg, This 3-axis Victor Vcenter P106 was manufactured in 2023. It features a Heidenhain 620 CNC, a spindle speed of up to 12,000 rpm, and a tool changer with a 30-tool capacity. The machine offers a robust one-piece Meehanite cast iron base and column, optimized for stiffness and vibration damping. If you are looking to get high-quality milling capabilities, consider the Victor Vcenter P106 machine we have for sale. Contact us for more information. Additional information • Travels: X-axis 1060 mm, Y-axis 600 mm, Z-axis 560 mm • Rapid feed X/Y/Z: 32 / 48 m/min • Axis servomotor power: 3 kW • Ball screw diameter: 40–45 mm • Ball screw pitch: 16 mm • Guideway width: 45–35 mm • Axis acceleration: 0.5–0.7 G Kljdpfx Asx D N Dwsh Nel • Table • Size: 520 × 1120 mm • Max load: 600 kg • T-slots: 5 × 18 × 100 mm • Max speed: 12000 rpm • Spindle taper: BBT-40 • Motor power: 11–15 kW • Tool Changer Capacity: 30 tools • Max tool diameter (adjacent empty): 75 (150) mm • Max tool length: 300 mm • Max tool weight: 7 kg • Tool-to-tool change time: 2.3 s. • One-piece Meehanite cast iron base and column with oversized ribs for high rigidity • Stabilized outdoors for at least 6 months to remove internal stresses • Designed for efficient chip evacuation and easy operator access • Structure developed with FEA (Finite Element Analysis) for optimal stiffness and vibration damping • Linear guideways on base (X/Y axes) and column (Z axis) • Dual screw conveyors for chip removal Dimensions Machine Depth 3363 mm

Condition: used, Year of construction: 2002, functionality: fully functional, Working range X 6,170 mm Working range Y 1,380 mm Working range Z 155 mm Main motor Kw7.5 kW Max rotation speed 24,000 rpm Aggregate heads 4. axis Ksdpfxsr E A U Io Ah Nell C-axis tool change positions 10 vertex boring heads 20 Horizontal boring heads X 6 Horizontal boring heads Y 2 Arm structure Work surface Console table Number of bars 10 Positioning aid Vacuum pump capacity 2 x 125m³/h Chip conveyor belt

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 13 h, power: 18.2 kW (24.75 HP), axle configuration: 4x4, load capacity: 320 kg, platform length: 1,830 mm, platform width: 790 mm, overall weight: 7,300 kg, construction height: 2,680 mm, fuel type: diesel, fuel tank capacity: 115 l, tire size: 315/55D20, tire condition: 100 %, wheelbase: 2,400 mm, color: orange, Equipment: UVV, all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2025 Hours: 13.2 h (machine is new) Working height: 18.26 m Kledpfx Aexy Ruvjh Nel Max. horizontal outreach: 11.32 m Platform capacity (SWL): 320 kg Platform size (L × W): 1.83 × 0.79 m Platform rotation: Yes – 180° Upper structure rotation: 360° continuous Boom type: Telescopic Jib: Yes – 1.50 m jib, 132° articulation Drive: Diesel Four-wheel drive: Yes Stabilisers: No Tyres: Rough-terrain, non-marking, 315/55D20 Engine: 18.2 kW Emission class: Stage V Machine weight: 7,300 kg CE certification: Yes === HIGHLIGHTS === Only 13.2 operating hours – brand new CE-certified with full documentation Ready for immediate work and worldwide transport 4×4 drive, oscillating axle, proportional joystick controls Excellent boom geometry with 11.32 m outreach and 1.5 m jib === CONDITION === New condition – fully inspected, tested, and verified. Perfect working order. Viewing and testing possible on request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). This Dingli BT18CMRT2 (2025) is new, with only 13.2 operating hours. Equipped with a diesel engine, 360° upper structure rotation, 180° platform rotation, and a 1.5 m jib. Designed for demanding construction and industrial applications where stability, outreach, and reliable performance are essential. All machines are CE-certified, fully inspected, and ready for immediate deployment. Technical support, spare parts, and documentation are available on request. === TRANSPORT & LOADING === Crane loading available upon request. International transport arranged by Collé’s logistics team.

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, Manufacturer: MK Group (United Kingdom) Type: Eddy Current Separator – Heavy-Duty Industrial Design This eddy current separator has been in use in our production environment for the past several years. The unit has undergone a comprehensive overhaul and has been prepared for further, long-term operation within our processing line. It is now offered for sale solely due to a change in the configuration of the production line. The machine is fully operational and ready for immediate use. ⸻ Dimensions and Specifications • Working length: 3800 mm • Working width: 1300 mm • Overall width: 2000 mm • Depth: 2500 mm • Working height: 1100 mm • Discharge reach: 1200 mm ⸻ Technical Parameters and Scope of Overhaul • Rotor shaft fully refurbished and dynamically balanced. • Sliding table liners replaced. • Rotor drive motor: 5.5 kW, 400V. • Centric rotor, 48-pole system (24 permanent magnets). • Conveyor belt drive motor: 1.1 kW, 400V. • Separator structure is fully enclosed. Klsdpfx Asycdigsh Nel ⸻ Technical Condition The machine was operated in production at our facility. The overhaul was performed with a view to its continued use in our line, not for resale. After refurbishment, the unit was used in standard production conditions and has proven to be fully functional. The sale is due solely to a modification of the technological concept of the line. ⸻ Testing and Handover • There is an option to connect the separator and conduct performance tests on site by prior arrangement. ⸻ Optional Equipment (not included as standard) • Electrical control box for variable speed operation (available at additional cost). • Vibrating feed table (available at additional cost).

Condition: good (used), functionality: fully functional, machine/vehicle number: LDE1671, mileage: 138,111 km, power: 100 kW (135.96 HP), first registration: 10/2020, fuel type: diesel, empty load weight: 1,800 kg, maximum load weight: 1,000 kg, overall weight: 2,800 kg, next inspection (TÜV): 12/2026, fuel: diesel, energy efficiency: D, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 4,895 mm, total width: 1,928 mm, total height: 1,910 mm, loading space length: 2,650 mm, loading space width: 1,650 mm, loading space height: 1,350 mm, Year of construction: 2020, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, full service history, hill-start assist, navigation system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, sliding door, soot filter, start-stop system, tire pressure monitoring, traction control, truck registration, Optional extras: Trailer hitch: Electrics for trailer socket Audio 40 audio navigation system (DAB+, Bluetooth, USB) Electric exterior mirrors Adjustable and heated, both DAB tuner (digital radio reception) Automatic headlight activation Driver Assistance Package Rear door without glass (opening angle 180 degrees) Wooden floor in the cargo area Comfort lighting in the passenger/cargo area Fuel tank: Enlarged Steering wheel (mechanically adjustable steering column) Multifunction steering wheel including trip computer Parameterizable special module Parking Package Windshield wiper with rain sensor Seats in the driver's cab: Two-seater passenger seat Cover in the cargo/engine compartment: Plywood Heat-insulating glazing Two-way speakers in the front Additional equipment: 3-button remote control for central locking 3rd brake light Adaptive brake light Passenger side airbag Driver side airbag Start-off assist (Hill Start Assist) Aspherical exterior mirrors, both Outside temperature display Mounting rails for Roof rack BlueEfficiency package Brake assist, braking system with ABS+ASR Base design and equipment line Driving assistance system: Attention Assist (drowsiness detection sensor) Driving assistance system: Breakdown management Driving assistance system: Crosswind assist Windshield with windscreen antenna Klsdpfx Ajx U S Hfeh Njl 6-speed transmission - FSG, Belt tensioner, grab handle on the passenger side Lockable glove compartment Body/structure: Box body, Body/structure: Compact Communication module (LTE) for digital services Continuous cargo compartment partition Mercedes-Benz emergency call system Model update, engine 1.7 liter - 100 kW CDI CAT Rear fog light Wheelbase 3200 mm Low emissions according to the Euro 6d-TEMP emissions standard Sliding door for the cargo/passenger compartment on the right Seat belt system with warning system (driver/passenger side) Seat cover/upholstery: Fabric, cab seats: Adjustable driver's seat Steel rims 6.5x16 Maintenance interval indicator Assyst Gross weight 2.80 t Loading space L: 2.65 m Loading space W: 1.65 m Loading space H: 1.35 m

Condition: new, Year of construction: 2025, CORMAK RGE16PW Electric Tapping Machine – Precision and Performance for Industrial and Workshop Use The CORMAK RGE16PW electric tapping machine is an advanced device designed for cutting threads in a wide range of materials. It is suitable for both industrial applications and craft workshops. Design and Technology The CORMAK RGE16PW tapping machine has been engineered for intensive operation in demanding industrial environments. Its design is based on robust, precision-made components that ensure long-term reliability and consistent performance. The central element of the machine is the tapping arm equipped with a quick-change chuck, allowing fast and easy replacement of taps. This enables quick switching between different tap sizes, significantly improving work efficiency. The tapping arm is connected to a high-torque servo drive, enabling precise thread cutting. The use of a rotating arm provides excellent flexibility, allowing tapping at any angle, which makes the machine a versatile tool across various industries. In addition, the tap holders are equipped with adjustable overload clutches that protect the machine from damage in the event of excessive load. The entire structure of the CORMAK RGE16PW is designed for ease of use and durability. The drive mechanism is resistant to heavy-duty operation, while the cooling system ensures stable performance during long tapping cycles. Precision and Work Efficiency The tapping process using the CORMAK RGE16PW electric tapping machine delivers exceptional precision thanks to servo drive technology, which controls every movement of the tapping arm with high accuracy. The control system allows programming of key operating parameters, such as: Rotational speed – adjustment of the tap speed ensures optimal conditions for different materials, resulting in high-quality threads. Klodpfeycc S Tox Ah Njl Tapping direction – the ability to select the threading direction provides flexibility for various applications. Thread depth – precise setting of tapping depth, essential for threads with specific technical requirements. Standard Equipment of the CORMAK RGE16PW Tapping Machine Touchscreen control panel – enables easy programming of tapping parameters such as rotational speed, threading direction, and thread depth Rotating tapping arm – allows thread cutting at any angle Tap holders with overload clutches – protect the machine from excessive load, ensuring long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – facilitates chip removal, improving visibility during tapping Technical Specifications – CORMAK RGE16PW Power: 0.6 kW Power supply: 230 V Weight: 30 kg Maximum arm reach: 1080 mm Maximum rotational speed: 375 rpm Included in the set: Tap holders for M3, M4, M5, M6–8, M10, M12, M13, M16 *The machine is sold without a worktable, vise, and taps.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, load capacity: 8,000 kg, lifting height: 8,300 mm, free lift: 2,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 4,150 mm, motor manufacturer: G.M., gearing type: hydrostat, fork length: 1,500 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 33X13 3/4 X 22, overall weight: 21,500 kg, empty load weight: 13,500 kg, total height: 2,650 mm, total length: 2,850 mm, total width: 3,350 mm, color: red, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🏆 Years of experience | 🔧 In-house service & paint shop | 🤝 Professional consultancy | 🚚 Own transport | 🛠 After-sales support Looking for a forklift you can rely on? We are a reputable dealer of new and used forklifts with a proven track record. We serve customers throughout Europe – from small enterprises to large multinational industrial plants. Our forklifts are more than just equipment – they ensure efficient and dependable logistics for your operations. What sets us apart? Kledpfxjycc Smo Ah Njl ✅ Each forklift undergoes a comprehensive technical service (inspection, testing, filter and oil replacement, refurbishment of major components) ✅ Complete UDT inspection available on request ✅ In-house paint shop and service workshop – forklifts enhanced both technically and visually ✅ Europe-wide delivery with our own fleet of trained drivers ✅ Operator training on delivery + functionality check at your location ✅ After-sales service and technical support – we're here for you post-purchase ✅ On-site viewing and testing available at our headquarters – we invite you to visit! ✅ Hundreds of satisfied customers across Europe – join those who trust us ✅ Financing available – cooperation with leading leasing companies ✅ Invoice in EUR or PLN – as per your preference Currently in stock: COMBILIFT C8000 – Four-way Forklift ✅ Year: 2007 ✅ Power: LPG ✅ Capacity: 8,000 kg ✅ Mast: Triplex – 8,300 mm ✅ Wide fork positioner 3,900 mm | Forks 1,500 mm ✅ Super-elastic tyres – 100% condition ✅ Technical condition: Excellent – after major servicing ✅ Appearance: Well-maintained, corrosion-free, ready for operation Dimensions: Truck height: 2,650 mm Overall length: 2,850 mm Width: 3,350 mm Positioner width: 3,900 mm Overall structural height: 4,150 mm Lifting height: 8,300 mm Ideal for: 🏭 Narrow-aisle warehouses 🌲 Timber, steel, and pipe industries 📦 Handling long cargo 🏗 Both indoor and outdoor use FT Logistics – Quality you can count on. Service you can trust.

Condition: used, We offer the Inject Star P60 separator – an industrial machine for advanced meat recovery (AMR), designed for meat and poultry processing plants and factories that want to maximize the use of raw materials and reduce production losses. The P60 separator works on the basis of a hydraulic press with a crushing chamber, which separates meat from bones and hard tissues and then presses it through a perforated filter. How does the Inject Star P60 separator work? In a special feeding device, the bones are fed into the pressing chamber and pre-compacted. Then, a linear hydraulic system separates the advanced meat from the bones and pushes it through a perforated filter (standard 8 mm). This results in high-quality meat mass while maintaining low calcium content and minimal temperature increase during the process, which has a positive effect on the quality and functionality of the final product. Kljdsycc H Rspfx Ah Nsl The AMR Inject Star system enables the recovery of up to approx. 35% of meat from red bones, with low wear on consumables and relatively low running costs. Technical data: Manufacturer: Inject Star Model: P60 Power supply: 400 V, 3Ph, N Installed power: 18 kW Capacity: 900 kg/h Capacity with bone breaker: 1500 kg/h Process type: hydraulic pressing system with perforated filter (8 mm, optionally 2 mm) Dimensions (L x W x H): 4900 x 1900 x 2900 mm Weight: approx. 4100 kg Advantages of the Inject Star P60 separator High meat recovery from bones – up to approx. 35% of high-quality meat can be recovered from red bones, which significantly increases the profitability of the raw material. Low calcium content – the end product is characterized by a low calcium level (< 1,000 mg/kg) thanks to the use of a precision pressing chamber and perforated filters. Minimal temperature increase – the separation process causes only a slight increase in meat temperature, which has a positive effect on color, structure, and technological properties. Low operating costs – the low-wear design and low maintenance requirements reduce running costs and the risk of expensive downtime. Possibility of line expansion – according to the manufacturer’s offer, the separator can work with a bone crusher as a preliminary stage and with additional soft tissue separators, as well as various loading systems.

Condition: used, This used steel stacking container is made of painted steel and built to the standard Euronorm dimensions of 1000 × 800 mm. Kledpfxoyccw Ne Ah Njl With a generous 203-liter capacity, the container offers ample storage space for heavy, loose, or bulk products. The closed, profiled walls and base reinforce the structure and ensure extra dimensional stability

Condition: new, Year of construction: 2026, The RD700 VARIO is built on a solid column structure that ensures stability and vibration resistance. The radial arm enables precise head positioning from 300 to 700 mm relative to the column, while a quill stroke of 130 mm allows comfortable drilling in one setup. Key Components Spindle: Morse taper MT3 with drawbar, stepless speed control, maximum drilling capacity 32 mm. Feed system: Automatic spindle feed with three ranges, integrated with tapping mode. Main motor: 1.5 kW, 400 V, designed for continuous operation. Table and base plate: 250×250×250 mm cube table and 900×620 mm work plate with T-slots. Precision and Performance With stepless speed regulation and digital indicators, the RD700 VARIO guarantees high machining accuracy and repeatability. The automatic feed and tapping mode reduce cycle times, while the rigid construction minimises vibrations and extends tool life. Applications The CORMAK RD700 VARIO radial drilling machine is ideal for mechanical workshops, toolrooms, production plants, and maintenance departments. It is perfect for machining steel elements, welded structures, machine parts, and industrial components. Standard Equipment Cube table Base Drill chuck 3–16 mm / B18 Mandrel MT3 / B18 Reducing sleeve MK3 / MK2 Cooling system Tapping mode Digital spindle speed indicator Digital drilling depth indicator Adjustable height guard Basic tool set Safety guards User manual CE certification Technical Data *The price quoted is for the machine itself, excluding optional/additional equipment, installation, transport and training— please contact our consultant for more details. Parameter Value Maximum drilling capacity 32 mm Maximum tapping capacity M22 Spindle taper MK3 Minimum spindle speed 75 rpm Maximum spindle speed 2,500 rpm Speed change Stepless (75–438 / 438–2,500) Automatic feed range (3) 0.08 / 0.14 / 0.22 mm/rev Spindle–column distance 300–700 mm Spindle–table distance 0–430 mm Spindle–base plate distance 175–680 mm Vertical arm travel 505 mm Horizontal head travel 400 mm Quill stroke 130 mm Kjdpfx Aeyccn Ueh Nell Column diameter 150 mm Cube table size 250 × 250 × 250 mm Base plate work area 900 × 620 mm Motor power 1.5 kW Power supply 400 V Width 1,220 mm Depth 640 mm Height 1,750 mm Weight approx. 722 kg

Condition: new, power: 96 kW (130.52 HP), fuel type: diesel, fuel: diesel, color: silver, emission class: euro6, Year of construction: 2024, Equipment: ABS, UVV, additional headlights, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, lighting, onboard computer, second-hand vehicle warranty, sliding door, traction control, truck registration, ON-BOARD COMPUTER, air conditioning, cruise control, leather gearshift/selector lever handle, height/length adjustable steering column (steering wheel), soot particle filter, drive type: front-wheel drive, sliding door to the loading/passenger compartment on the right, central locking with remote control, low emissions according to the Euro 6d-TEMP emissions standard, audio system: radio with USB and Bluetooth hands-free system, reversing camera, audio system 13: digital radio reception (DAB / DAB+) with 4 multifunction display, windscreen wipers with rain sensor, heated windscreen, tire repair kit, second key with remote control, electric parking brake, anti-lock braking system (ABS), fog lights, electric outside mirrors. adjustable and heated, parking pilot system front and rear, electric windows, passenger side airbag, metallic paint, exterior lights at the top rear LED, steel rims 6.5x16, cornering light in the headlight, storage in the cab roof liner, trailer stabilization program (TSA), hill start assist, indicator integrated in the exterior mirror, floor covering: vinyl in the loading/passenger compartment, brake assist, docking station (MyFord Dock), entry lights, electronic brake force distribution (EBD), electronic stability program, electronic. Traction control, FordPass Connect incl. eCall, 6-speed gearbox, 180 degree rear wing doors, heating with recirculation, intelligent acceleration control, body/structure: high-space box, automatic climate control, radiator grille with chrome strip, LED cargo area light, cargo area protection package, leather steering wheel, engine 2.0 liter - 96 kW TDCi KAT, My Key - second key programmable, digital radio reception (DAB+), radio remote control on the steering wheel, radio preparation - 4 speakers, wheelbase 3750 mm, headlight assistant with day/night sensor, rear mud flaps, crosswind assistant, seat package 18A: driver's seat (4-way adjustable) - passenger double seat (2-way adjustable) fabric, lane departure warning, lane departure warning with fatigue detection ... Subject to changes, prior sale and errors Kjdpfx Ahjvu Nvlo Nsll

Condition: used, mileage: 50 km, power: 125 kW (169.95 HP), first registration: 01/2026, fuel type: diesel, fuel: diesel, color: black, emission class: euro6, Year of construction: 2025, Equipment: ABS, UVV, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, second-hand vehicle warranty, sliding door, traction control, truck registration, ON-BOARD COMPUTER, air conditioning, cruise control, leather gearshift/selector lever, height/length adjustable steering column (steering wheel), soot particle filter, central locking with remote control, sliding door for loading/passenger compartment on the right, low emissions according to Euro 6d-TEMP emissions standard, audio system: radio with USB and Bluetooth hands-free system, reversing camera, audio system 13: digital radio reception (DAB / DAB+) with 4-function display, heated windscreen, audio system: radio with 12-function display, 360° camera system, electric parking brake, second key with remote control, audio navigation system, electric folding exterior mirrors, technology package 6P, anti-lock braking system (ABS), electric exterior mirrors. adjustable and heated, fog lights, parking pilot system front and rear, electric windows, remote control for auxiliary heating / additional heating, airbag on the passenger side, exterior lights at the top of the rear LED, steel rims 6.5x16, metallic paint, 2nd battery, cornering light in the headlight, storage in the driver's cab roof lining, ACC, trailer stabilization program (TSA), hill start assist, indicator light integrated in the exterior mirror, rubber floor covering in the loading / passenger compartment, brake assist, docking station (MyFord Dock), entry lights, electronic brake force distribution (EBD), electronic stability program, electronic. Traction control, sliding window in cargo/vehicle compartment, 2nd row left, sliding window in cargo/vehicle compartment, 2nd row right, FordPass Connect including eCall, 6-speed transmission, 180-degree rear wing doors, heating with recirculation, high roof, intelligent acceleration control, Isofix child seat mounts, cold start package, body/structure: double cab, body/structure: large van, automatic climate control, radiator grille with chrome strip, LED cargo area light, leather steering wheel, 2.0 liter engine - 125 kW TDCi CAT, My Key - programmable second key, Active Park Assist, radio... Subject to changes, prior sale and errors. Kljdpfxewg Sw Ie Ah Nel

Condition: used, mileage: 200 km, power: 100 kW (135.96 HP), first registration: 01/2026, fuel type: diesel, fuel: diesel, color: white, emission class: euro6, Year of construction: 2025, Equipment: ABS, UVV, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, ON-BOARD COMPUTER, drive type: all-wheel drive, soot particle filter, windshield wipers with rain sensor, central locking with remote control, heated windshield, sliding door for loading/passenger compartment on the right, tire pressure monitoring system, low emissions according to the Euro 6d emissions standard, load compartment partition without windows, automatic door locking, Power KeyFree start function, audio system: digital radio reception (DAB / DAB +) with 13 multifunction display and SYNC 4, Ford SYNC 4 with AppLink and touchscreen, metal load compartment partition, low emissions according to the Euro 6e emissions standard, electric front windows with quick-down / quick-up control on the driver / passenger side, second key with remote control that can be folded down, induction charging cradle for mobile devices, door unlocking (2 stages) including locking by slamming the door, spare wheel as an emergency wheel, exterior mirrors that can be folded down electrically, anti-lock braking system (ABS), exterior mirrors that can be folded down electrically. adjustable and heated, electric windows, USB interface, traction control, driver's seat armrest, A-pillar grab handle, automatic (8-speed), hill start assist, indicator light integrated in exterior mirror, rubber floor covering in the driver's cab, brake assist, electronic. Stability program, wrong-way driver warning function, electric parking brake, FordPass Connect including eCall, lockable glove compartment, rear wing doors (opening angle 90 degrees), heating with recirculation, intelligent acceleration control, body/structure: box, automatic climate control, fuel tank: 70 liters, LED cargo area light, truck registration, engine: 2.0 liters - 100 kW EcoBlue CAT, fatigue warning, emergency call system, pre-collision system, headlights with automatic dimming, rear mud flaps, front mud flaps, seats in the driver's cab: heated driver and front passenger seats, seats in the driver's cab: driver's seat with lumbar support, seat package 11A: driver's seat (4-way adjustable) - passenger double seat, fabric, lane departure warning system, lane change warning system, start/stop system... Subject to changes, prior sale and errors. Klodpswg N Svjfx Ah Njl