Used Telescopic Spindle for sale (14,474)

Condition: excellent (used), functionality: fully functional, power: 144.16 kW (196.00 HP), gearing type: semi-automatic, fuel type: diesel, color: red, overall weight: 23,870 kg, lifting power: 4,999 kg/m, lifting height: 34,700 mm, Year of construction: 2016, machine/vehicle number: 2486498, Equipment: cabin, Technical Data Podpsyqzzvofx Ahvopp Year of manufacture: 2016 Drive: Diesel 4x4 Lifting capacity: 4,999 kg Lifting height: 34.70 m Reach: 26.15 m Weight: 23,870 kg Engine power: 196 hp Turning radius: 7.00 m Dimensions (L x W x H): 9.26 m x 2.50 m x 3.09 m Length without attachment: 8.06 m Supported width: 6.00 m Rotation: unlimited General signs of use, fully functional

Condition: used, functionality: fully functional, power: 100.03 kW (136.00 HP), gearing type: hydrostat, fuel type: diesel, color: red, overall weight: 19,600 kg, lifting height: 25,800 mm, number of seats: 1, Year of construction: 2022, machine/vehicle number: 2487368, Equipment: all wheel drive, cabin, Technical data Year of manufacture: 2022 Pedeyqzz Aepfx Ahvspp Max. lifting capacity: 6,000 kg Max. lifting height: 25.80 m Max. outreach: 22.20 m Slewing range: 360° Rated power: 136 HP Max. torque: 500 Nm at 1,600 rpm Displacement: 3.6 l Drive: Hydrostatic Overall dimensions (L x W x H): 9.05 m x 2.53 m x 3.12 m Width with outriggers: 5.870 m Transmission: Dropbox gearbox with 2 travel speeds (forward, reverse) Tyres: 445/65 R22.5 Max. travel speed: 40 km/h Gradeability: 35% Weight: 19,600 kg General signs of use, fully functional

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 135 h, load capacity: 227 kg, lifting height: 15,800 mm, fuel type: hybrid, color: red,

Condition: used, Year of construction: 2020, load capacity: 13,000 kg, lifting height: 9,700 mm, total length: 6,200 mm, - Max. Kapazität mit Gabeln bei 600 mm 13 000 kg - Max. Reichweite 5,17 m - Betriebsbremse Ölbad-Lamellenbremsen hydraulisch unterstützt an beiden Achsen - Feststellbremse Automatische negative Feststellbremse - Motor MERCEDES - Art OM 936 LA. E4-3 (Stufe IV / Tier IV final) - Hubraum 4 Zylinder 5,1 Liter - Leistung: 176 PS / 129 kW - Max. Drehmoment 750 Nm / 1200-1600 U/min Podpfx Asyr Sv Tehvepp - Batterien 24 V - 2X12 V - 120 Ah - 850 A - Zugkraft: 10 800 daN - Steigfähigkeit: 34% - Getriebe hydrostatisch - Elektrohydraulische Steuerung - Anzahl der Gänge (vorwärts/rückwärts) 2/2 - Lenkmodus 4-Rad-Lenkung - 3 Lenkmodi - Max. Fahrgeschwindigkeit (kann je nach geltendem Recht variieren) 31 km/h - Achsen DANA - Hydrauliköl 290 l - Kraftstoff 315 l - Geräusch am Steuerplatz (LpA) 80 dB - Umgebungslärm (LwA) 107 dB - Vibration auf die ganze Hand / den ganzen Arm

Condition: new, Year of construction: 2026, load capacity: 13,500 kg, lifting height: 9,600 mm, total length: 6,000 mm, Telescopic forklift Manitou MHT 10135 Drive Diesel Ppodoyr Svgspfx Ahvop Year built 2026 Lifting height (mm) 9,600 Lifting weight (kg) 13,500

Condition: good (used), Year of construction: 1998, operating hours: 692 h, mast type: telescopic, fuel type: electric, Weights Empty weight: 2.000 kg Functional Lifting capacity: 200 kg Working height: 1.750 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Remanufactured: Yes Ppsdoyvd D Ropfx Ahvjp Max. horizontal reach: 1000 m Transport dimensions (LxWxH): (L/B/H): 7,20m / 0,89 m / 2,00m Additional information Please contact Tobias Mayr for more information

Condition: good (used), Year of construction: 1994, Table dimensions 1100 x 750 mm Pjdpfx Aoyf N E Eohvopp Motor output 5 kW Spindle diameter 30 mm reus 2900/4400/6000/8000 U/min Weight 500 kg

Condition: good (used), Year of construction: 1980, Table dimensions 1.100 x 760 mm Podpsxzuwwjfx Ahvopp Motor output 4,7 kW Spindle diameter 30 mm reus 3.000/4.500/6.000/9.000 U/min

Condition: not inspected (used), functionality: unexamined, rotational speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Speed: 40,000 rpm Ppjdpfeyr R Nxox Ahvep MACHINE DETAILS Length: 670 mm Width: 350 mm Height: 400 mm Weight: 70 kg EQUIPMENT (Currently no information available)

Condition: ready for operation (used), functionality: limited functionality, power: 74 kW (100.61 HP), fuel type: diesel, empty load weight: 6,450 kg, lifting power: 3,000 kg/m, lifting height: 6,000 mm, Year of construction: 2004, Equipment: additional headlights, all wheel drive, cabin, standard shovel, trailer coupling, Telescopic Loader MANITOU MLT 630 Turbo Year of manufacture: 2004 Operating hours are unknown as the counter is non-functional! 101 HP Perkins engine 4-speed powershift transmission 3-ton lifting capacity 6-meter lifting height - NEW BUCKET - mechanical quick coupler - auxiliary hydraulic circuit up to the fork carriage - all-wheel drive - 3 steering modes - joystick control - cab with heating - lighting system with indicators - ready for immediate use! - original paint! - good tires! - incl. CE certification - incl. Belgium road registration Sale price: €23,500 net, incl. new bucket as shown in the photos! Pallet forks or light material bucket available at additional cost! Pjdpfx Aoyf Abyohvjpp Affordable delivery possible!

Condition: used, 1 unit CNC turning center with two spindles and two turrets, MAZAK MULTIPLEX 420, including tool holders, clamping devices and cutting tools, 3x storage racks, 3x tool cabinets, as per images and inspection, self-dismantling required. Color: green. Dimensions L/W/H: 100x40x28 cm. Condition: used. Storage location: production hall / left side. Payment method: advance payment via bank transfer. Shipping: Collection only – no shipping offered for this item! Pedpsyr Hzksfx Ahvjpp

Condition: excellent (used), Year of construction: 2014, I sell the 2-spindle horizontal multirip saw of polish production Walter OP-500. Year 2014. Pedswini Eepfx Ahvjpp Suitable for cutting round wooden logs with 2 Spindles. Cutting width 120 - 350mm. Motors 23,8 + 23,8 KW. Total power 54,2 KW. Diameter of main saw blade max. 500mm. Feed speed controlled by variator up to 20m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,310 h, load capacity: 4,500 kg, lifting height: 6,500 mm, free lift: 2,300 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,250 mm, fork length: 1,350 mm, overall weight: 7,450 kg, empty load weight: 4,500 kg, total height: 3,250 mm, total length: 2,950 mm, total width: 2,200 mm, maximum load weight: 4,500 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, fork extension, lighting, pallet forks, Perfect condition Only 3309 hours Telescopic forks – Reach 1350 / 2350 mm Fork positioner We sell forklifts after a full service. Prepared for the end user. Ready to use. Ppjdpfoyu Tq Dex Ahvsp We can arrange transport within Europe and worldwide.

Condition: used, SCM Startech 23 Multiple Spindle Boring Machine 23 spindles, left/right spindles, quick-change spindle chucks, spindle pitch 32 mm, drilling vertical, horizontal or at an angle, pneumatic clamps, power supply 380V, 2.2KW motor Pjdpfjyu R S Sex Ahvopp Machine weight: 500 kg The machine is fully functional and ready for operation.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2467308, load capacity: 250 kg, lifting height: 9,680 mm, platform length: 1,140 mm, platform width: 800 mm, overall weight: 7,065 kg, transport length: 5,360 mm, transport width: 1,200 mm, transport height: 2,220 mm, fuel type: electric, tire size: 598 x 190, color: yellow, Equipment: UVV, Technical data Motor: Electric 48 V - 320 Ah Working height: 11.68 m Platform height: 9.68 m Ppodpjyqzr Uofx Ahvjp Max. outreach: 6.94 m Articulation point: 4.74 m Max. load capacity: 250 kg Platform dimensions (L x W): 1.14 m x 0.80 m Overall dimensions (L x W x H): 5.36 m x 1.20 m x 2.22 m Travel speed: 0.68 - 6.0 km/h Max. gradeability: 25% Weight: 7,065 kg General signs of use, fully functional, UVV compliant

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: 2476208, power: 55.2 kW (75.05 HP), load capacity: 227 kg, lifting height: 20,120 mm, platform length: 1,830 mm, platform width: 910 mm, overall weight: 12,800 kg, transport length: 10,340 mm, transport width: 2,440 mm, transport height: 2,570 mm, fuel type: diesel, tire size: 15 x 19,5, color: red, Technical specifications Pjdpfx Aheyqz H Sevepp Year of manufacture: 2008 Engine: Diesel, 55.2 kW (74 hp) Working height: 22.12 m Platform height: 20.12 m Lateral reach: 17.37 m Platform size (L x W): 0.91 m x 1.83 m Overall dimensions (L x W x H): 10.34 m x 2.44 m x 2.57 m Slew range: 360° Platform rotation: 170° Load capacity: 272 kg Basket length: 1.52 m Weight: 12,800 kg Climbing ability: 50% Travel speed: 7.2 km/h General signs of use, fully functional

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 510 h, * 510 hours * Lifting height up to 15 meters * Load capacity 5,500 kg Psdpfeyu Hylsx Ahvopp * Quick coupler * Forks and bucket * Like new condition

Condition: used, power: 66 kW (89.73 HP), Year of construction: 2022, operating hours: 170 h, maximum speed: 20 km/h, Operating hours: 170 Max. lifting capacity: 2,500 kg Max. lifting height: 4,800 mm Max. outreach: 2,600 mm Length to attachment carrier: 3,320 mm Width: 1,540 mm Height: 1,975 mm Total weight with forks: 5,120 kg Psdetxgqlopfx Ahvjpp Total weight without forks: 4,950 kg Motor: Electric – zero emissions Power: 66 kW (90 HP) Maximum speed: 20 km/h Lead-acid battery: 48 V Nominal capacity: 960 Ah Cab: Semi-open cab ROPS/FOPS Heated seat Sun roller blind Roof wiper Digital display 4x1 electronic joystick with capacitive enable, including direction selector 2-section telescopic boom Attachment carrier: Quick-change system type ZM2S Steering: Two rear steering wheels Drive: Permanent all-wheel drive Braking system: Negative electrohydraulic parking brake, regenerative braking system, oil-immersed brakes at the front Hydraulics: Load-sensing variable displacement pump Hydraulic flow rate: 42 l/min Working pressure: 210 bar Flow-sharing control block Electrics: Charging voltage 220 / 400 V Charging time at 220 V: 9 hours Maximum operating time: 8 hours (depending on application) Tyres: AS 504 10.0/75-15.3 18 PR Standard equipment: - Lowering of the telescopic arm by gravity - 2 hydraulic outlets at the boom head - Road lighting - LED work lights on cab (2 front, 2 rear) - Automatic battery disconnect switch - Acoustic reverse warning - Lift cylinder support for safety - Certificate for type approval at 20 km/h - External wallbox charger 16 A – 400 V Optional equipment: - Upper door section in glass (for closed cab) - Cabin heating - Heated front windscreen - 31x15.5-15'' 12 PR TR315 BKT, AG tread (vehicle width increases to 1.70 m) Location: Hellenthal municipality

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,211 h, maximum speed: 40 km/h, Operating hours: 1,211, First registration: 11.10.2022 Basic Equipment / Technical Data: - Max. lifting capacity: 4,200 kg - Max. lift height: 7,000 mm - Max. outreach: 3,800 mm - Length to implement carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine: - 4-cylinder Deutz TCD 3.6 - 3.6 l displacement, water-cooled - Power: 105 kW (143 HP) Ppodjtu Sztopfx Ahvjp - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR-catalyst with AdBlue injection (DPF + DOC + SCR) Drive: - Hydrostatic travel drive - Pump: electronically controlled with variable output - Engine: variable displacement motor - EPD TOP incl. optional automatic rpm increase - Mineral-based hydraulic oil HVI 46 Transmission: - 2-speed, electrohydraulically controlled - Max speed: 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: - Enclosed cab - Split door - 360° all-round visibility - V3611 GRAMMER air-suspended seat with lap safety belt - ROPS/FOPS certified - Heating - Front, roof, and rear wipers - Sunblind - 4x1 electronic joystick with capacitive release incl. direction control switch - CS = hydropneumatic cab suspension Boom: - 2-piece telescopic boom with electronic end position damping, Soft Stop - Implement carrier quick coupler system type "ZM2", hydraulically controlled from the cab Steering: - Hydraulic steering - 3 steering modes: All-wheel, front-wheel, crab steer - Permanent all-wheel drive - Axles: fixed front axle, oscillating rear axle Brakes: - Power-assisted disc brakes on all four drive shafts - Parking brake automatically engages when engine is off Chassis: - High-strength steel frame construction Hydraulics: - Load Sensing variable displacement pump - Work hydraulics flow: 150 l/min - Hydraulic fan flow: 46 l/min - Total flow: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics: - 12 V - 100 Ah battery - 120 A alternator Stabilization Control: - Simplified Merlo ASCS System (ASCS-light) with fully electronic stability control, audiovisual signals, attachment recognition, and overload cut-off Tires: - 460/70 R 24 Michelin XMCL Standard Equipment: - Power brakes - Hydraulic oil cooler - Rear plate for mounting a trailer hitch - Hydraulic reversing fan - Radio prep - Work lights on cab (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Load guard on implement carrier - Road lighting - Automatic main battery switch - Electrical cable in boom - Audible reverse signal - Lift cylinder support for securing Optional Equipment: - EU approval as tractor/towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. connection for trailer lighting (for compact and medium models, height-adjustable version strongly recommended) - Air conditioning - Boom suspension (B.S.S.) - LED beacon on cab roof (approval subject to ...

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 142 h, maximum speed: 40 km/h, Operating hours: 142, first registration: 16.01.2024_____max. lifting capacity 4,200 kgmax. lifting height 7,000 mmmax. outreach 3,800 mmLength to attachment carrier 4,730 mmWidth 2,310 mmHeight 2,530 mm / 2,590 mm (CS activated)Total weight with forks 8,170 kgTotal weight without forks 8,000 kgEngine 4-cylinder Perkins 904J3.6 l displacementwater-cooledPower: 100 KW (136 hp)2,300 rpmHydraulic reversible fanStage VDiesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection(DPF + DOC + SCR)Hydrostatic drive pump: electronically controlled with variable displacement Engine: variable displacement motorEPD PLUS incl. optional automatic rpm increaseMineral hydraulic oil HVI 46Transmission 2 speedselectrohydraulically controlledVmax = 1st / 2nd gear = 16 / 20 km/h, option for 40 km/h Cab closed cabsplit door360 degree all-round visibilityGRAMMER air-suspended seat with safety beltROPS/FOPS-certifiedHeaterFront, roof, and rear windscreen wipersSunblind4x1 electronic joystick with capacitive release incl. direction selectorCS=hydropneumatic cab suspensionTelescope boom 2-section with electronic end position damping Soft StopAttachment carrier quick-change systemType "ZM2" hydraulically controlled from the cabSteering hydraulic steering3 steering modes: all-wheel, front-wheel, crabAll-wheel drive permanent all-wheel driveAxles front axle fixedrear axle oscillatingBraking system servo-assisted disc brakes on all four drive shafts, automatically engagedparking brake when engine offChassis made of high-strength steelHydraulic system variable displacement pump "LOAD SENSING"TypeWork hydraulics flow rate: 151 l/minHydraulic fan flow rate: 46 l/minTotal flow rate: 197 l/minWorking pressure: 250 barFlow-sharing control valveElectrical system 12 VBattery with 100 Ahlternator 120 AStabilisation control Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signal, attachment recognition and overload automatic shutdownTyres 460/70 R 24Standard equipment Servo brakeHydraulic oil coolerRear plate for AHK mountingHydraulic reversible fanRadio preparationWork lights on cab (2 front, 2 rear)Preparation for additional function at boom head2 hydraulic connections at boom headLoad protection grid at attachment carrierRoad lightingAutomatic battery master switchelectric connecting cable in boomAcoustic signal when reversingBoom support for securingSpecial equipmentEU - approval as tractor/towing vehicle 40 km/h incl. self-locking tow hitch, 30/32 mm pin, incl. trailer lighting connectionAir conditioningBoom suspension (B.S.S.)LED work lights on cab (2 front, 2 rear)2 work lights at the end of the first boom section (main boom)ASCS upgrade: display with all ASCS functions + Th Psdpfjpcht Hex Ahvspp

Condition: used, Year of construction: 2024, operating hours: 95 h, maximum speed: 40 km/h, Operating hours: 95, First registration: 15.01.2025 Basic equipment / Technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to implement carrier: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - 4-cylinder Deutz TCD 3.6 - 3.6 l displacement - Water-cooled - Power: 105 kW (143 hp) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Drive - Hydrostatic transmission, electronically controlled pump with variable displacement, variable displacement motor - EPD TOP incl. optional automatic rpm increase - Hydraulic oil: mineral-based HVI 46 - Transmission: 2-speed, electrohydraulic control - Vmax = 1st / 2nd gear: 16 / 20 km/h, optional 40 km/h Cab - Enclosed cab - Split door Ppjdpfjuycgfjx Ahvop - 360° all-round visibility - V3611 GRAMMER air-suspended seat with safety lap belt - ROPS/FOPS certified - Heating - Front, roof, and rear wipers - Sun visor - 4x1 joystick, electronic with capacitive release including travel direction switch - CS = hydropneumatic cab suspension Boom - Two-part telescopic boom with electronic end position damping (Soft Stop) - Quick change implement carrier system, type "ZM2", hydraulically operated from the cab Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steer - Permanent all-wheel drive - Axles: rigid front axle, oscillating rear axle Brakes - Power-assisted disc brakes on all four drive shafts, automatically acting parking brake when engine switched off - Frame construction: high-strength steel Hydraulic system - Variable displacement pump of "LOAD SENSING" type - Working hydraulics flow rate: 150 l/min - Hydraulic fan flow rate: 46 l/min - Total flow rate: 196 l/min - Working pressure: 250 bar - Flow sharing valve block Electrical system - 12 V - 100 Ah battery - Alternator 120 A Stability control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability monitoring, audiovisual signal, implement recognition and overload cut-off Tyres - 460/70 R 24 Michelin XMCL Standard features - Power brake - Hydraulic oil cooler - Rear plate for mounting a towing hitch - Hydraulic reversing fan - Radio ready - Work lights on cab (2 front, 2 rear) - Preparation for auxiliary function on boom head - 2 hydraulic connections on boom head - Load protection guard on implement carrier - Road lighting - Automatic battery main switch - Electric connection cable in boom - Audible reverse alarm - Hoist cylinder support for safety Special equipment - EU approval as tractor/agricultural tractor, 40 km/h including self-locking trailer hitch, 30/32 mm pin, trailer lighting connection - Air conditioning - Boom suspension (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on end of first boom section (main boom) - ASC

Condition: like new (used), power: 46 kW (62.54 HP), rotational speed (max.): 18,000 rpm, SPL Motor Spindle HSK-A63 46 kW 18000 rpm Manufacturer: SPL Spindel und Präzisionslager GmbH Type: Motor spindle Tool holder: HSK-A63 Power: 46 kW Rated speed: at 9880 rpm Maximum speed: 18000 rpm Lubrication: Lifetime grease Bearings: Hybrid bearings Cooling: Water cooling Coolant flow rate: 8 l/min Maximum pressure: 7 bar Protection class: IP65 Pedpfx Aheyr Aavevopp Balancing quality: G1 Spindle head seal: Purge air Radial run-out accuracy: 2 µm Axial run-out accuracy: 2 µm Radial run-out accuracy at 250 mm distance: 12 µm Rotating parts mass moment of inertia: 0.0196 kgm² Front spindle diameter D1: 151 mm Bearing diameter D2: 174 mm Diameter LB: 164 mm Overall length L: 614 mm Material number: 90010004149

Condition: refurbished (used), Year of construction: 2008, rotational speed (max.): 18,000 rpm, WEISS / SPL Motor Spindle HSK-A63 175389A 18000 rpm Pjdpeyrz Ryefx Ahvspp Manufacturer: Weiss Spindeltechnologie GmbH / SPL Spindel und Präzisionslager GmbH Type: Motor spindle Spindle type: 175389A Tool interface: HSK-A63 SPL type: DR-WE-175-M-W-18-46 Serial number: 60201670 Year of manufacture: 2008 Maximum speed: 18000 rpm Motor: AC135/200/4 Protection rating: IP54 Cooling: Water cooling Coolant flow rate: 8 l/min Temperature sensor: KTY 84-130, PTC Diameter D1: 179.7 mm Diameter D2: 262 mm Diameter LB: 285 mm Total length L: 1026 mm Spare part number: 90010000013

Condition: refurbished (used), power: 19 kW (25.83 HP), rotational speed (min.): 1,100 rpm, rotational speed (max.): 15,000 rpm, Manufacturer: Weiss Spindeltechnologie GmbH Manufacturer group: Siemens Company Type: Motor spindle Spindle type: 175047 A Tool interface: HSK-A63 Motor designation: MW20/26-4 DBL 191299 Podpfx Aoyrz N Aohvepp Power P: 19 kW Rated speed: 1100 min⁻¹ Maximum speed: 15000 min⁻¹ Speed ranges: 1260 / 1710 / 4200 / 15000 min⁻¹ Frequency: 42 / 57 / 140 / 500 Hz Voltage: 137 / 175 / 400 / 400 V Current: 116 / 86 / 48 / 36 A Standard: EN 60034 Diameter D1: 179.7 mm Diameter D2: 262 mm Diameter LB: 285 mm Overall length L: 1026 mm Spare part number: 90210001388 Item number: 211167

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 6 h, load capacity: 3,400 kg, lifting height: 8,860 mm, fuel type: diesel, mast type: telescopic, construction height: 2,485 mm, empty load weight: 8,500 kg, total length: 5,440 mm, drive type: Diesel, construction width: 2,240 mm, Telescopic forklift rigid Mast type: Telescopic Technical condition: New Front tires size: 460/70 r 24 michelin xcml Ppjdpfx Ahew Ir Inovjp Rear tires size: 460/70 r 24 michelin xcml