Used Table Drive for sale (53,899)

Condition: good (used), Reversible clamp, 4th axis, rotary table, rotary dividing table, controlled rotary table, dividing attachment, dividing head, rotary indexing table rotary coupling -Manufacturer: Fibro, Fibroplan rotary table with drive Ksdpshvtcbofx Affjnf -Type: NC1.03.0340.1.1.04.04 -Table diameter: 340 m -Clamping: hydraulic -Drive: Indramat servo motor type 112B-0-LD-4-C/180-A-0/Wi533LX/S011 -Number: 2x round table available (1 x with base plate) -Price per piece -Dimensions: 660/640/H550 mm (with base) -Weight: 420 kg (with base plate) /pc.

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Ksdpfx Afsxnlavjfonf

Condition: used, machine/vehicle number: VS94NTRGSMA86xxxx, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21540 Knodpfx Asxm S Udeffef Specifications: EU-approved until 28.07.2026 2021 model Tires (see pictures) Length: 1,290 cm Width: 255 cm Axle distance: 181/181 cm Curb weight: 13,940 kg Max payload: 59,060 kg Hydraulic loading ramps Lift on 1st axle Toolbox Description:Rojo semi low-loader from 2021 with a maximum payload of 59 tons.The trailer is EU-approved until July 2026.Available for prompt delivery. Technical approved: Yes EU-approved until: 28.07.2026 Own weight: 13940 Total Weight: 73000 Payload: 59060 Width: 255 Length: 1290 Model: 2021 Rojo Maskinsemi m/ hydrauliske kjørebruer

Condition: used, Year of construction: 2000, operating hours: 5,018 h, machine/vehicle number: 002272, fuel type: diesel, Weights Empty weight: 14.800 kg Functional Mast: articulated arm Lifting capacity: 1.000 kg Working height: 2.250 cm Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: Continental Knedpfx Aox H Id Rjffef Max. horizontal reach: 0 m Transport dimensions (LxWxH): 5.74x2.55x4.1 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Panel saw Martin T60, Sliding table 300 cm, Main motor 5.5 kW, Right-side rip fence adjustable up to 1250 mm, Tilt motorized adjustment, Up/down motorized adjustment, Max. blade diameter 400 mm, Kjdotza Smjpfx Affonf Swiveling side carriage.

Condition: used, Year of construction: 2008, BOTTERO 535 AVM-37 – Year 2008 Laminated Glass Cutting Table Max Cutting Length: 3700 mm Thickness: Float: 3-8 mm Knodpex Hwauofx Affof Laminated (2+2) (8+8) mm Power: 23 kW + BOTTERO 100 BLM – Year 1998

Condition: good (used), Year of construction: 1992, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform -Load capacity: 500 kg -Platform: 2200 x 1000 mm -Dimension when retracted: 450 mm -Extended dimension: 600 mm -Attention: Stroke only: max. 150 mm -without control Knsdeb A R I Djpfx Affjf -Number: 7x lifting tables available Price: per piece -Empty weight: 700 kg/piece

Condition: excellent (used), Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Knjdpfx Aex Nalfoffjf Projection/cutting width 405 mm Table size 615 x 615 mm With Ideal BS0/16 saw blade welding device with blade shears and grinding stone Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very well maintained condition

Condition: good (used), Baumann BSB 3L Paper Jogger Ksdpfx Afsx Hql Rjfenf This machine is 100% functional and in very good condition. This is the latest design from a German manufacturer. Technical Specifications: Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Power supply: 400V Air squeezing roller Air table Tilt angle adjustment Automatic flap opening Jogging frequency adjustment (inverter) Adjustable squeezing roller force and speed. Chrome-plated table surface

Condition: good (used), Year of construction: 2008, load capacity: 1,000 kg, lifting height: 800 mm, fuel type: electric, empty load weight: 135 kg, MULTIPLE UNITS IN STOCK This semi-electric scissor lift from 2008 by BT is in good condition; The stacker is manually operated and lifts fully electrically; The stacker has a capacity of 1,000 kg; Lifts up to a height of 800 mm; Kedpfx Aex Hpndjffenf Ideal to use as a workbench! The 2 x 12 volt batteries come with an INTERNAL charger; Order the scissor lift through our webshop or schedule a test drive; Video coming soon.

Condition: ready for operation (used), Feeding table Nordberg with Hopper ding table: 5000 x 1100 mm Dim. Hopper: 5500 x 3700 x 2500 mm Driving: 22 kW E-motor Kodpfx Aoi A Aqgoffenf

Condition: used, Year of construction: 2000, operating hours: 9,658 h, machine/vehicle number: 0300058125, fuel type: diesel, Weights Empty weight: 15.032 kg Knsdox Hnupjpfx Affef Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.650 cm Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: Outrigger Max. horizontal reach: 1575 m Transport dimensions (LxWxH): 11.3x2.44x3 Additional information Please contact PFEIFER GROUP for more information

Year of construction: 1962, condition: ready for operation (used), A heavy-duty rotary table is offered that was completely overhauled in 2024. Control cabinet: new, motors/components: new, table size X/Y: 3200mm/3200mm, max. table load: 40000kg. Travel distance table slide: 1750mm. Control: Siemens, measuring systems: Heidenhain, control cabinet in transport fixture, regularly maintained, documentation: original plans, wiring diagrams 2024, terminal plan, operating manual, machine weight: approx. 30000kg. Inspection is possible by arrangement. Ksdsx I Rraspfx Affenf

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2003-2928/29, input voltage: 400 V, type of input current: three-phase, Pannkoke laminated glass cutting table with a maximum glass cutting width of 3.24 m and a maximum thickness of 12 mm laminated glass. Includes EUROMEC semi-automatic float cutting table (year 2003) as a loading table. Both machines are in very good condition. Kodpfx Afsx I Rb Isfenf

Condition: not inspected (used), Year of construction: 1981, functionality: unexamined, machine/vehicle number: 8124, Esterer VET-S already dismantled without electrics The VET-S is sold as is, in its current condition. Year of manufacture: 1981 Knsdjuy H T Nopfx Affsf Factory number: 8124

Condition: used, Year of construction: 1997, functionality: unexamined, Polar Mohr RA-4 Year of manufacture: 1997 After the jogging process is completed, the air is pressed out of the cutting ream. You can perform single or double pressing, with the pressing pressure for the first cycle being adjustable; on an inclined table, intermediate pressing is also possible. Kodpfx Aewth Rwsffenf Table size: 900x1150 mm Minimum ream height: 30 mm Manual ream height: 80 mm Compressed air requirement at 6–8 bar: approx. 2 L/min

Condition: ready for operation (used), Drive-unit Kleemann Brand: Kleemann Roll lenght: 750 mm, Ø 420 mm Beltwidth: 650 mm Speed: 1,3 m/sec Knodpfji A Apqex Affef Driving: Stiebel Gearbox 15 kW

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 42 mm -Dimensions: 150/130/H245 mm -Weight: 5.3 kg Knodpfx Afsv Rxl Iofjf

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1110013, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle diameter: 110 mm, TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,500 mm Knedpfxox I A D Uo Affsf Drilling spindle diameter: 110 mm Clamping surface of the table: 1,250 x 1,600 mm Table load capacity: 6,000 kg MACHINE DETAILS Control: Heidenhain TNC 426M Note: The tools shown in the images are not part of the sale or included in the scope of delivery.

Condition: new, Catalogue number H0548 - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm Knedpfx Afjdpdcvsfof - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2025, Blade diameter ⌀250 - 350/30 mm Scoring blade diameter (work only with ⌀300, 350 mm blade) ⌀120/20 mm Main motor power 4 kW Scoring motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of the scoring blade 8800 rpm Blade tilt 0 - 45° Max. cutting length 3200 mm Moving table stroke 3400 mm Cutting width with longitudinal ruler 1250 mm Wedge ⌀350 mm Shaft flange diameter 87.5 mm Table stop ruler set to an angle of 90° - 45° accuracy ±1° Ksdpfxev Dtuqe Affenf Max. cutting height with ⌀300 mm blade 95 mm Max. cutting height with blade ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Weight 650 kg

Condition: used, Year of construction: 1996, Weight: 950 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 96-03-537 - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Knsdpfxjx Higge Affof Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, neu 2025 030138 ca. 2 - 4 Wochen ab Auftr Deutschland 3360.75 € 1 13 mm MK 2 220 mm 40 - 4000 U/min 0,54 (230 V, frequenzgere kW M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Kodpfx Afjxcbhrjfenf Drill package 2 (vice & keyless chuck)

Condition: used, power converter / rectifier. techn. details see photos. Knodpfx Afed Ihaxjfsf

Condition: excellent (used), CATALOG NUMBER 7513 Technical specifications: - Max main saw blade diameter – without scoring unit: 400 mm - max cutting height: 120 mm - Max main saw blade diameter – with scoring unit: 300 mm - max cutting height: 70 mm - Blade bore diameter: 30 mm - Scoring spindle saw blade diameter: 100 mm - Scoring spindle end diameter: 20 mm - Main blade adjustable up/down - Blade guard - Spindle lock - Sliding table length: 2600 mm - Cutting width at fence: 900 mm - With side table Knsdjvfp Iiepfx Affof - Main motor power: 5.5 kW – Scoring spindle motor power: 0.75 kW - 2 rotation speeds - Table dimensions: 1200 x 700 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 2600 x 3300 x 1100 mm - Weight: 790 kg ADVANTAGES – German manufacture – Used saw, in very good condition Net price: 9500 PLN Net price: 2260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)