Used Swivel Rotary Table for sale (21,411)

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Lasdpfx Ajztrvnjbzjg Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: used, Year of construction: 2010, table diameter 1000 mm table load 0,5 t Lodeznndkopfx Abzoag table height 300 mm total power requirement 12 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 1,2 x 0,3 m Permamantly rotationg table,adjustable in speed. Basic of table has a diameter of 570 mm. Table diameter increased to 1000 mm. Table was mounted on a surface ginding machine. Table will be delivered with a new spare motor.

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: Laedpfxeu N D Rqe Abzsg - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: used, Year of construction: 2010, functionality: fully functional, The round table with 6 segments is for sale. Ledpfx Ajzvux Rjbzjag

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Lasdpfx Aswugczebzsg Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Lasdpfx Aetrhv Sobzeg Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 Lodoy Tn Enspfx Abzoag \+ Rotary table \+ Robot wittmann W818 (Z=2500mm)

Condition: used, Year of construction: 1967, Year of Manufacture: 1967 Machine / Serial No.: 72882 Country of Manufacture: Germany Manufacturer: Praehomawerk Kehren & Co., Hennef/Sieg Model: RW 6 Machine type: Rotary table surface grinding machine Grinding method: Surface grinding with rotary table Grinding spindle arrangement: Horizontal spindle Control: Conventional / manual Rotary table diameter: 600 mm Magnetic chuck: Electromagnetic rotary table Grinding height: approx. 350 mm Laedpjzvfi Hjfx Abzeg Maximum workpiece diameter: approx. 650 mm Grinding wheel diameter: approx. 400 mm Grinding spindle speed: up to approx. 3,000 rpm Grinding spindle motor power: approx. 5.5–7.5 kW Vertical adjustment: Manual / powered vertical adjustment Table rotation: Powered rotary table Coolant system: Included Grinding wheel dressing: Manual dressing arrangement Machine operation: Conventional push-button control Operating hours shown: approx. 11,350 h Machine length: approx. 2,500–3,000 mm Machine width: approx. 2,000–2,300 mm Machine height: approx. 2,700–3,000 mm Machine weight: approx. 3,500 kg

Condition: like new (used), Year of construction: 2001, CNC rotary table for Mazak machines. Manufacturer: Kitagawa, model RS 20. Laedpfozumu Iox Abzog

Year of construction: 2012, condition: ready for operation (used), Max. load: 2.5t, connected load: 4kW, weight: 1.477t. Laodpfx Abslyrz Iozeg

Year of construction: 2000, condition: ready for operation (used), Two custom made but expandable and convertible rotary indexing tables for the soldering process are available: 1) Load capacity: approx. 10kg-15kg, mounting points: 4, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2000mm, weight: approx. 500kg, year of manufacture: approx. 2000. The battery is empty. An on site inspection is possible. Lodpfx Asx R Dtpjbzoag

Condition: good (used), DECKEL universal table - small - , used Clamping surface 800 x 240 mm Ledpozucr Nofx Abzsag Weight estimated approx. 0.1 t

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Lajdpfxewugh Ds Abzjg Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons.

Condition: used, 3 used round tables Diameter: 250 mm, 300 mm, 400 mm. Ledpfx Abozt Iyvozsag

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron Lajdpozt Ai Esfx Abzeg with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: new, functionality: fully functional, Jainnher Machine Co., Ltd. was established in 1982 and is dedicated to developing grinding machine technology, diversity and automation equipment. Jainnher is constantly offering new and improved machinery. The new JAINNHER JHP-4015 CNC Plunge Type machine with FANUC CNC Control. Hydrostatic and Hydrodynamic bearings. Capacity Max ø work swing Ø400 mm Max grinding length 1500mm Max grinding dia. Ø380 mm Max workpiece weight 150 kgs Distance between centres 1500mm Centre height 200mm Grinding wheel Grinding wheel size Ø410 x 50-100 x 203.2mm Max peripheral 33 m/sec Wheel speed 1250rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 280mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Oil Pressure Hydrostatic = 20kg Hydrodynamic = 3kg Tailstock Retraction of quill 30mm Quill diameter 70mm Centre taper MT.4 ( MT.5 option) Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT.4 ( MT.5 option) Spindle type Telescopic (option Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +7º/-4º Rapid traverse speed 10m/min Max. travel 1500mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 7.5HP 4P(opt. 10.0HP) 4P Workhead motor 1.5KW Work table (Z axis) 1.8KW Work table (X axis) 1.8KW Hydraulic pump 1/4 HP 4P Wheel head pump Hydrostatic = 2.0HP Hydrodynamic = 1.0HP Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 60L Laedpfjnzib Eex Abzeg Wheel head lubrication 50L Coolant tank 160L Machine N.W (Fully enclosed) 8080 kg G.W (Fully enclosed) 8480 kg Dimension (Fully enclosed) 4900 x 2100 x 2000mm Packing (Fully enclosed) 5090 x 2200 x 2200mm

Condition: new, functionality: fully functional, he EUROPA JAINNHER JHV-1008CNC vertical grinding machine is designed for grinding of large components used in the transport, aerospace, power generation, oil & gas, hydraulic and precision components. With a grinding internal diameter range from Ø50 to 800 mm, a maximum outside diameter of Ø1000 mm. The maximum height of the workpiece is 800mm, with a maximum worktable load of 1200 kg. EUROPA Jainnher JHV-1008 CNC Vertical Grinder Capacity Range of I.D. grinding 50 – 800mm Maximum O.D grinding 1000mm Z axis maximum grinding height (OD) 800mm Z axis maximum grinding height (ID) 50 – 250 : 325mm / 250 – 800 : 800mm Maximum swing diameter 1000mm Maximum installed component height 800mm Laedpfx Asnzkvhobzeg Maximum work table load 1200kg Email for latest factory build availability

Condition: new, functionality: fully functional, NEW Rotary table surface grinder available in the UK. With up to a 400mm grinding diameter on this rotary table, vertical spindle surface grinder from Italian manufacturer DELTA, a leading surface grinder manufacturer with over 20,000 units sold worldwide. The rotating table is controlled by asynchronous three-phase bipolar motors with 8/16 poles; thanks to these motors, the table can rotate at a speed of 40 rpm and at a rate of 30 rpm. Delta Rotary surface grinder Maximum grindable surface 400mm Ø Lodpfx Ajnziakjbzeag Distance between column and wheel axis 315mm Max. distance between magnetic table and wheel 205mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0,01mm Size of cup wheel 200 x 80 x 78mm Ø Size of abrasive segments 50 x 20 x 90mm Motor power of the wheel (4 HP)-3 kW RPM of the wheel (50 Hz) 2840rpm/min Electropump motor power (0,08 HP)-0,06 kW Mass of the machine 680kg Rotary table surface grinder Standard Equipment Low tension electric system (24V). Cooling system with electropump Wheel-holder flange and grinding wheel. Grinding wheel guard Table guard.- Stakes key Instruction book/testing certificate Two colour painting RAL 5018-7032, bicomponent multicoat of paint CE conformity certificate with respect to the Units Directive CEE 89/392 and subsequent modifications Stock machine complete with Automatic Downfeed control

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Ledpfx Ajzpbrqobzoag Weight: 40.5 kg Good condition

Condition: like new (used), Year of construction: 2014, functionality: fully functional, UNUSED GSA T320 CNC Tilting and rotating table. Full specification on request. Item in new condition, having never been used. Available now.. Contact us for further information. Lsdoxy Iq Uspfx Abzeag

Condition: good (used), Platform size: 1200 x 900 mm Lajdpopy Duvsfx Abzsg

Condition: ready for operation (used), Year of construction: 2021, DELTA LC 400 / Year of manufacture 2021 / Rotary table grinding machine -CE marking -Year of manufacture 2021 -Magnetic table - rotary table 300mm -Max. grinding diameter 400mm -Distance column - grinding spindle axis approx. 315mm -Grinding height - magnet - grinding wheel approx. 215mm -Grinding spindle speed 2840 rpm -Fine feed 0.01mm -Lateral retraction device -Spindle motor approx. 3 KW Ljdpfx Aszrpdmebzeag -Dimensions of cup wheel 200x80x78mm -Machine enclosure -Coolant system -Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight approx. 800kg Subject to errors and omissions.

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Lsdpfx Asya Dtmsbzoag

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2409, Offer 24410 Welding turntable and tilting table - three axes - welding positioner Technical data: - max. load capacity 250 kg - Face plate diameter 400 mm - min. Table height in horizontal position approx. 500 mm - Max. table height in horizontal position approx. 800 mm - Working height manually adjustable in 3 steps - Faceplate can be rotated motorized - Faceplate manually swiveling or tilting + height adjustment - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 500 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for speed Ljdpfx Asur Icuebzsag - E- foot switch - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Year of construction: 2002, condition: good (used), machine/vehicle number: 8280, Offer 21463 Technical data: - Max. load capacity 10000 kg - Turntable dimensions 1400 x 1400 mm - Turntable hydraulically swivelable 0 - 90 / 135 ° - Rotation speed continuously adjustable 0.05 - 1.2 rpm - Clockwise and counterclockwise rotation controllable - Welding current transmission approx. 500 A - Power supply 400 V - Table height in horizontal position approx. 2500 mm - Electric remote control - Space requirement approx. W 2000 x H 2500 x D 2700 mm Lodpfxehfwnqo Abzoag - Weight approx. 5200 kg