Welding table, welding rotary table

AYEL-TECH HBJY-10

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Iaodjw U U N Uspfx Aqueu side-clamping surface: 200 (Höhe) mm weight 1518 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: new, Year of construction: 2025, TTMC WELDING MANIPULATOR TYPE WP500 - Capacity horizontal 500 kg - Capacity vertical 250 kg - Table dimension 560 mm - Door stop 170 mm - Electric tiltable Iodpfxogg Rb Te Aqujau - Foot pedal - Documentation - 230V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm total power requirement:18 kW weight of the machine ca.:2,7 t Ijdpfodmbrxex Aquoau dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW Iaedpfx Aqswm Rm Ioueu weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm Iaedpfx Aowpincequsu - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min - Hydraulic lifting – lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Condition: good (used), Year of construction: 2000, Ref. -No.: 10623 Manufacturer: WEILER Type: E90 x 4500 Year of construction: 2000 Type of control: CNC Control: SIEMENS D1 - Zyklen Iaedpfx Asy Ed Rqjqusu Storage location: Halberstadt Country of origin: Germany Bed width: 600 mm Turning Length: 4500 mm Swing Diameter Over Bed Slide: 900 mm Spindle Bore: 128 mm Max. Torque: 6000 Nm Feed Capacity - Z: 20000 kN Feed Capacity - X: 20000 kN Rapid Speed: 10/5 RPM Tailstock Quill Diameter: 140 mm Tailstock Quill Stroke: 300 mm Lathe tool dimensions: 32 x 25 mm Front bearing diameter: 178 mm Circumferential diameter over facing slide: 530 mm Spindle head according to DIN 55027 (size): Gr. 11 Tailstock inner cone: MK 6 / 140 Type Machine length: 6900 mm Machine width: 2600 mm Machine Height: 2150 mm Weight Of The Machine Ca.: 10,5 t Further information: The machine can be viewed while powered up.

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l Iajdpoxab R Uefx Aqueu total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: new, pressure 30 t stroke 400 mm daylight longitudinal/sideways 740 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 7,5 mm/sec feed up 12,5 mm/sec Motor output 2,2 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,35 x 0,85 x 2,1 m High-quality, hydraulic press can be used either by hand or by motor operate. Iaodsitt S Tspfx Aquju Cylinders can be moved sideways. Safety valve at cylinder end position. CE marking

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Center distance: 2000 mm • Center height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed slide guide length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: • Gear stage 1: 1–625 rpm • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Tool holder system: Multifix size C or Parat size 3 • Availability: machine available soon • Overhaul: will be fully overhauled in 2026 • Hardening and grinding of all bed guides; grinding of tailstock guides • Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways) • Renewal of bed slide sliding lining • Renewal or relining of keyways and lower guides • Installation of a tool system on a console (Multifix C or Parat Gr.3) • Overhaul of complete spindle housing assembly • Regrind main spindle (internal/external taper and face) • Renewal of main spindle bearings • Renewal of X-axis ball screw drive incl. bearings • Renewal of Z-axis ball screw drive incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of defective rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and testing of the central lubrication unit • Replacement of movable cables and coolant hoses in the work area/to the monitor • Replacement of the membrane keypad (monitor) • Renewal of the energy chains • Painting in standard colors (standard texture) Iasdpfjy H E Akox Aqueu • DGUV and high-voltage testing with test report • Data backup of machine parameters/software • Geometric acceptance testing according to DIN 8605 Additional equipment • Optional accessory: chip conveyor availableThe machine will be overhauled in July the pictures are only refreneces of how it would look like. Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1999, tube diameter bis 60 mm weight of the machine ca. 1,8 t Iajdpfx Aovvnm Ssqusu