Used Sub Spindle for sale (13,008)

Condition: excellent (used), Catalogue number: 7759 TECHNICAL DATA Circular saw: - Max blade diameter: 350mm - Spindle: 30mm - Blade adjustable front/back, up/down, angle - Pneumatic movement of the saw unit front/back - Blade guard - Motor: 2.2kW I and II milling spindles: - Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 150mm - Spindle lock - Pneumatic movement of units front/back - Manual up/down adjustment - Max cutter diameter: 300mm - Motor approx. 7.5kW - Side sliding table – manual traverse - Table dimensions (L/W): 1000x380mm - Angle fence - Pneumatic workpiece clamp - Dimensions (L/W/H): 2600/3200 (for shipping 2200)/1540mm - Weight: 1450kg ADVANTAGES – German manufacture – 3-spindle machine – Not repainted – Very good condition – Used tenoner Net price: 13,900 PLN Net price: 3,300 EUR Kdedpfx Ahsxg D Ays Njg Net price calculated at 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: used, Grinding spindle Make FAG Dimensions of the conical pin of the recording: Diameter 80-61 lg 100 mm intake Cone Diameter min. 68 lg. 70 mm Diameter Max 80 lg. 70 mm min. 61 lg. 100 mm Max. 80 lg. 100 mm Length 500 mm Diameter 200 mm Weight 100 kg DX9UK3MUZNK Kdsdpfxoc Tuxde Ah Njg

Condition: good (used), Hollow spindle stroke Diameter 125 mm Weight 6.6 kg Kodpfx Aedbc E Nsh Nedg

Year of construction: 2010, condition: excellent (used), Spindle tool in wooden case Make IGP Spindle mount Mk 4 Kdsdpfx Ajf Dx Srsh Neg maximum spindle range 200 mm Weight 6,8 kg

Condition: like new (used), Spindle bearing Brand Union Kodpjdvvtlefx Ah Nodg Working RADIUS 600 mm Spindle diameter 130 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, number of spindles: 2, spindle speed (max.): 6,500 rpm, travel distance X-axis: 840 mm, travel distance Z-axis: 425 mm, Auction of a production line with robot and two workpiece palletizers! TECHNICAL DETAILS Travel distance X: max. 840 mm Travel distance Z: max. 425 mm Spindle speed: 6,500 rpm Workpiece palletizer capacity: 24 workpiece carriers Number of main spindles: 2 Number of tool turrets: 2 Number of tools per turret: 12 MACHINE DETAILS High-pressure pump: up to 120 bar per line Machine weight: 8,000 kg Cooling: Spindle and machine bed cooling Kdodpeyap Naefx Ah Njg EQUIPMENT Robot M6iB Workpiece shuttle system by Heilig Automation with 2 pick-up stations High-pressure pump up to 120 bar per line Chip crusher Workpiece palletizer with a capacity for 24 workpiece carriers

Condition: ready for operation (used), Year of construction: 2010, This Hüttenhölscher Drilling rig was manufactured in 2010. It features a PC-controlled function sequence under Windows 7, TwinCAT, and a used drilling system with a 6-station loading gantry. The rig includes a 2-axis gantry robot, Y/Z axes with servo motors, and a travel distance of Y-axis 8500 mm, Z-axis 1500 mm. It also has a suction crossbeam with a four-circuit vacuum supply. Contact us for more information about this machine. Application Types Boring & Drilling (Wood) Kodpfx Ahsx Tkaue Nsdg

Condition: excellent (used), Year of construction: 2000, Colchester Student 2500 Ksdow R S Awepfx Ah Nodg 3-axis digital readout Collet chuck setup Various accessories

Condition: good (used), Year of construction: 2008, I sell the fourside moulder Weinig Unimat 300, year 2008 Feeding speed 5-30 m/min. Working width 230mm Working height 130mm 5 spindles Configuration: bottom - right - left - top - bottom Total power 28kW 3-zone pneumatical pressure Good condition Fully working! Kdodpfjr Arr Eex Ah Nsg Available immediately

Condition: excellent (used), Catalogue number 7784 Kjdpfext I Adjx Ah Nsdg TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Spindle moulder with sliding table and pneumatic clamp, including HolzHer ETZ feed unit. 4 feed speeds: 2 – 12 m/min. 3 new feed rollers. Table size: 1000 mm wide, 930 mm deep. 30 mm spindle. Heavy-duty construction. Milling fence with fine adjustment. 4.5 kW. Weight approx. 600 kg. Ksdpfxoudwlze Ah Nedg

Condition: new, Catalog number: H0531 – new machine, in stock – tiltable spindle – with side trolley – CE certificate – DTR documentation in Polish TECHNICAL DATA spindle diameter 30mm spindle stroke 100mm max spindle diameter 180mm spindle adjustable at an angle of -5+45 degrees table dimensions 1000x360mm sliding table 1000x250mm 4 types of speeds 1800, 3000, 6000, 9000 U/min engine power 2.8kW/3.9kW exhaust nozzle diameter 100mm dimensions length/width/height 1150/1155/730mm weight 270kg PRODUCT FEATURES Milling machine lower spindle - table FS 200SF is a massive construction with a table top made of grey cast iron with a high-quality gauge mounted to hold the processing element and high precision of adjustment. The price includes a milling machine with a sliding side carriage. FS 200SF with a tilting spindle is a device with a wide 4-step speed range: 1800/3000/6000/9000 It is successfully used for processing the edges of straight-line elements and for creating decorative strips, grooves, projections, tenons and dovetails The welded steel body and large cast iron table make it a very solid and stable machine, not susceptible to vibration Kdodpex Tgt Rsfx Ah Nsg A precise formatting table included Net price: PLN 14,100 Net price: EUR 3,350 Net price calculated according to the exchange rate of PLN 4.2 / EUR (in the event of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7003 Kdodpfx Ahox Tgryj Nsg Technical Data: - Spindle diameter: 25mm - Spindle working height: 80mm - Interchangeable spindle - Spindle locking - Height adjustable (up/down) - Original cast iron fence - 2 speed options + right/left rotation - Table dimensions: 1000x800mm - Motor: 3kW - Dimensions (LxWxH): 1280x860x1100mm - Weight: 465kg Features: – Bulgarian manufacture – Very good condition – Used milling machine Net price: 5,500 PLN Net price: 1,300 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change due to fluctuations in the exchange rate)

Condition: new, Catalogue number: S0367 TECHNICAL DATA work table dimensions 800x800mm engine power S1/S6 3.0 / 4.4kW table hole diameter 190mm spindle diameter 30mm spindle tilt 0° -45° spindle speed 1400 / 3500 / 6000 / 8000rpm right, left rotation spindle vertical travel 175mm spindle working height 125mm max. tool diameter for shaping / for tenoning 180/250mm exhaust nozzle diameter 120mm dimensions length/width/height 2800x1800x1090mm weight 410kg PRODUCT FEATURES Large, massive cast iron work table. Table hole diameter 190mm, with under-table exhaust. Electronic speed readout. Spindle protection for 180mm diameter. Spindle lock installed. 4 speeds. Spindle tilt forward ADVANTAGES – new machine – tiltable spindle – with side carriage – CE certificate Kdsdpfxex Tgrgo Ah Nsg Optional: – motor power 4.0 (5.5) kW (HP) – spindle protection for 250 mm contouring – integrated safety guides 350, 500 mm – table extension on the left and right side – spindle diameter 1 1/4, 32, 35, 40, 50 mm The price includes the milling machine with a sliding side carriage. Net price: PLN 17,200 Net price: EUR 4,100 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. Kdedevrcqdspfx Ah Neg For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: used, functionality: fully functional, Schaublin 150 High-Precision Lathe with 2-Axis Digital Readout ND780 Technical Specifications: Ksdjwynluspfx Ah Nodg >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Distance between centres: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock taper: MK3 >> Infinitely variable spindle speeds: 55–3000 rpm >> Rapid traverse motor: 1500 rpm >> Total power requirement: 4.45 kW >> Weight approx. 1200 kg Accessories: >> 160 mm 3-jaw chuck, 1 set of jaws >> Multifix B, 3 holders >> Collet chuck system with collets >> Change gears >> Stops >> Coolant system >> 1 box of change jaws >> Centre points >> Operating manual About the machine: For sale is a Schaublin 150 High-Precision Lathe. The machine is operational, features rapid traverse, and is in good used condition. You are welcome to inspect the machine under power on site and see its condition for yourself.

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: Ksdpfx Ajvrckqoh Njdg >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps Kjdpov Tyzcjfx Ah Nedg >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch Kdedpfxevv Etvj Ah Nsg >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: Kdodswvuf Topfx Ah Njg >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet Kdsdpfjvambcox Ah Neg To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 Kodpfx Ahevrdlce Nsdg >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Kodpfx Ahjwrm Dts Nedg Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg Ksdjwthbijpfx Ah Nedg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Kdsdpfx Ahowag Ste Nog Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.