Used Str 701 for sale (9,663)

Condition: used, tank capacity: 650 l, GENERAL INFORMATION Equipment: Spray head Design: upright Remarks: Metallic discoloration on the inside Speed: 1415 rpm Outer diameter: 1,040 mm Inner diameter: 900 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 2,380 mm Heating/Cooling: present Insulation: present Power: 1 kW Max. permissible operating temperature: 170 °C Max. permissible operating overpressure: 8.0 bar Max. overpressure: 1.50 bar Agitator: Propeller Location: Bremen Technical documentation: Drawing, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Volume: 650 liters Cylinder wall thickness: 6.0 mm Double jacket material: V2A 1.4301 (AISI304) Product contact material: V2A 1.4301 (AISI304) Psdpfxsxqa T Ns Aalopl Condition: used Cylindrical height: 900 mm Previous application: Pharmaceuticals VESSEL Max. permissible operating temperature: 170 °C Base design: on feet Number of feet: 4 HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FITTINGS Manhole / dome: in the top lid (DN 400) Discharge outlet: 25 mm MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Voltage: 220/380 Volt Agitator position: eccentric, in top lid TECHNICAL DATA / DIMENSIONS Base wall thickness: 5.0 mm

Condition: used, machine/vehicle number: 007185, Overall length: 2500 mm Overall width: 1500 mm Suction capacity: 16000 m3/h Pedpfx Asu A Ev Iealepl

Condition: used, Year of construction: 2007, Please contact ATS Norway for more information Please provide reference number upon request: 22237 Specifications:• Not EU-approved• Model year: 2007• Air suspension• Tyres (see photos)• Tipping function• Container locks• Length: approx. 920 cm• Width: approx. 255 cm• Axle spacing: 131 / 131 cm• Unladen weight: approx. 5,590 kg• Tool box Description:Istrail hook trailer with tipping function and container locks.The trailer is sold as-is without new EU approval.Ready for delivery. Ppjdoyc Dtxspfx Aalel Technical approved: no Own weight: 1250 Total Weight: 27000 Payload: 21410 Width: 255 Length: 920 Model: 2007 Istrail krokhenger med tipp

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,000 h, machine/vehicle number: 10059806/30023735, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 10,601,080 nm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, table length: 4,030 mm, table width: 2,020 mm, working length: 4,000 mm, working width: 2,000 mm, travel distance X-axis: 4,030 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 70 mm, cutting speed: 55,000 mm/min, power: 6 kW (8.16 HP), input voltage: 400 V, type of input current: AC, type of cooling: water, compressed air connection: 10 bar, overall weight: 14,250 kg, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Excellent laser cutting machine. Very little maintenance and repairs. Podpfjxrl Rvsx Aalspl

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Hand held barcode scanner 6000 mm infeed with digital pusher Ppodpfx Aaexx Hwwslsl 4000 mm manual outfeed with rollers

Condition: excellent (used), For sale: STRAVIS sawmill line consisting, among others, of a TTLG36 circular saw, PW15 multi-blade saw, PFPI3/3 panel saw, and numerous conveyors. Ppedjyfz Ilepfx Aaljl

Year of construction: 2015, condition: good (used), Deburring machine, used Make: NS Maquinas Industrial Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Power: 8 kW Number of cross belt stations: 1 Cross belt speed 2-8 mm/s Feeding speed 0,6-3,2 mm Extraction: Donaldson Performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel, or aluminum that have been cut in a laser, shearing, or punching machine. Podpeikm Tkjfx Aalopl Dimension; 2730x1740x1940 mm Weight: 1790 kg.

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Ppedpswn Hfiofx Aalol Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Weight: 18,900 kg + Tools

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, feed length X-axis: 6,000 mm, feed length Y-axis: 1,200 mm, table length: 6,000 mm, rotational speed (max.): 4,000 rpm, The machine is in good technical condition, connected to power with a Heidenhain 430 control system. Accessories include 2 milling heads, plate table, and clamping angles. Ppedpfxjxv Ad Ie Aaljl

Condition: excellent (used), Year of construction: 2021, For sale: Struers laboratory cut-off machine, model Discotom-100 FT 3x380-480V, year of manufacture 2021. The saw is in perfect condition, having operated for approximately 20 hours in our facility. Included in the set: a coolant tank with complete control equipment. Pedpfeyfxfhox Aalspl Greater versatility and performance in one cut-off machine. Device description Discotom highlights: • OptiFeed – intelligent feed control • AxioWash* – automatic cleaning system • ExciCut – designed for cutting extremely hard materials • MultiCut – serial cutting (enabling multiple sample preparation) • Method database • Cutting disc database The Discotom-10 and Discotom-100 are versatile benchtop cut-off machines, designed to economically expand your cutting capabilities and improve sample preparation processes. With a spacious and ergonomic design, both models offer exceptional flexibility for a wide range of clamping and cutting options for different sample types. This allows for efficient operation with less effort and minimal material deformation. Fast and precise State-of-the-art cutting technologies, such as intelligent speed adjustment, ensure exact and rapid cuts. Simply select the hardness of the material, and the machine automatically sets the optimal speed. Outstanding versatility If the disc becomes clogged with removed material, the user can select the automatic Direct Cutting mode with constant feed speed or the Impact Cutting mode. ExciCut manual mode is dedicated for separating harder and larger samples. The optional X-table automatic table unlocks the MultiCut function, allowing samples of identical or varying thickness to be cut precisely at specific positions. Time-saving operation The multifunctional rotary knob enables fast and easy setting of cutting parameters. Automatic speed setting not only saves time but also allows for using the same disc for various materials, eliminating the need for frequent disc changes. Swift switching between manual and automatic modes is supported by the motorized cutting arm lock, and a color display with icons provides a comprehensive overview of all essential information.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Machine available IMMEDIATELY with a wide range of accessories ex works Mayrhofen for a bid Psdpfxsnk Uabe Aalopl

Condition: good (used), Code: 0655 Brand: STRIEBIG - SWITZERLAND Model: STANDARD III 6220 - CE Standard Manual vertical panel saw for cutting wood panels, plywood, furniture, composite materials, plasterboard, sandwich panels, plastics, aluminium and various materials - CE Standard Technical characteristics: Machine frame with 40 welded cross beams and therefore very rigid Pjdpfxsyctpvs Aalspl Support on 17 rollers and three brake pedals for sliding panels Extremely stable motor column Compact vibration-free saw unit Integrated strip stop for repetitive cuts Sturdy pressure pad for material clamping and perfect suction on the front side Easy rotation of blade unit Support for small panels Reference stops Technical data: Cutting dimensions mm 5300 x 2200 Horizontal height cutting mm 2100 Cutting depth mm 80 Blade diameter mm 300 F 30 Blade speed 4750 rpm Motor power Kw 5,5 ( Hp 7,5) Installed power Kw 7 Suction inlet diameter mm 125 Overall dimensions of assembled machine mm 6665 x 3015 x 1810 h Weight kg 840 Overall dimensions for transport : Frame mm 6500 x 1300 x 2550 h - Weight kg 420 - Beam mm 3050 x 870 x 720 h - Weight kg 420

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, The machine was last overhauled in 2024! TECHNICAL DETAILS Material loading area: 4,000 mm x 2,000 mm MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm Psdpoyfv Exefx Aalspl EQUIPMENT Service and inspection history available from 2019

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, planing width: 520 mm, planer shaft diameter: 1,200 mm, total length of planing tables: 2,200 mm, total length: 2,200 mm, total height: 1,100 mm, total width: 1,040 mm, planing height: 240 mm, number of planer blades: 4, extraction nozzle diameter: 120 mm, overall weight: 1,050 kg, height adjustment type: mechanical, working height: 240 mm, table length: 2,200 mm, working width: 520 mm, jointer table length: 2,200 mm, SCM 2252 Surface Planer/Thicknesser – Planer Thicknesser in PERFECT CONDITION!!! Italian-made machine! TECHNICAL SPECIFICATIONS: Thicknesser: - Max planing width: 520 mm - Max planing height: 240 mm - Cutterblock diameter: 120 mm - Number of knives: 4 TERSA - Feed speed: 6.5–17 m/min Pjdpoyft Hyofx Aaljpl - 2 rollers in the table - Manual and mechanical adjustment of working height Surface planer: - Total table length: 2200 mm - Adjustable tables - Cutterblock silencing - Cutterblock guard - Extraction port: 150 mm - Tilting fence 0–45° - Fence length: 1070 mm - Power supply: 400 V - Motor: 5.5 kW Machine dimensions: - Length: 2200 mm - Width: 1040 mm - Height: 1100 mm - Weight: 1050 kg Where can you view our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKIE PROVINCE, POLAND Possibility to test the machine on site. Financing options available – leasing or installment payments. WE ORGANIZE TRANSPORT Tel: 664 335 465 Tel: 530 632 386 jbsmaszyny.pl

Condition: good (used), Stratasys Objet Model: Objet350 Connex3 + SUT70 USFL SOLO + WATER JET Technical Specifications: Build Volume: 342 × 342 × 200 mm Layer Thickness: 0.016 / 0.030 mm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Dimensions and Weight: 1400 × 1260 × 1100 mm; 430 kg Pjdpfxex A S Ate Aalepl Cleaning Station SUT70 approx. 580 x 605 x 800 mm, 70 kg Materials: Rigid and opaque: VeroPureWhite™, VeroWhitePlus™, VeroBlackPlus™, VeroGray™, VeroBlue™, VeroCyan™, VeroMagenta™, VeroYellow™ Elastomeric: Agilus30™, TangoPlus™, TangoBlackPlus™, TangoBlack™, TangoGray™ Transparent: VeroClear™ and RGD720 Polypropylene-like materials: Rigur™ and Durus™ Temperature-resistant & biocompatible SHR print head system PolyLog material management system Incl. digital color options (more than 500,000) GrabCAD Print software Incl. OBJET 350 Connex3 support package Condition: used Last inspection 2024! Scope of delivery: (see photo) (Specifications and data subject to change and errors excepted!) If you have any further questions, please feel free to contact us by phone.

Condition: used, machine/vehicle number: SZFTN1440JLD1xxxx, Year of construction: 2018, Please contact ATS Norway for more information Please provide reference number upon request: 22227 Specifications: 2-axle Lift on 1 axle Psdpfjycptqox Aalepl Air suspension Max payload: 12,600 kg Ready for delivery Description:2018 Istrail bogie trailer.EU approved and ready for delivery. Technical approved: Yes EU-approved until: 03.05.2026 Own weight: 5400 Total Weight: 18000 Payload: 12600 Width: 255 Length: 777 Model: Boggikjerre. Eu-godkjent.

Year of construction: 2019, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, travel distance Y-axis: 269 mm, machine/vehicle number: 1111127689, Equipment: sliding door, Hello, the machine is in perfect condition. For more information, please contact me by email. Cutting Capacity (Max): Magnutom 400: ø151 mm / 5.9" 151 x 403 mm / 5.9 x 15.9" 92 x 550 mm / 3.6 x 21.7" PHYSICAL SPECIFICATIONS: Cutting Motor: Continuous Power (S1): 11 kW / 14.7 HP Intermittent Power (S3): 16 kW / 21.5 HP Cut-off Wheels for Magnutom 400: Diameter x Thickness x Bore: 432 x 3.0 x 32 mm / 17 x 0.12 x 1.26" Rotational Speed (at rated load): 1000–1950 rpm Cut-off Wheels for Magnutom 500: Diameter x Thickness x Bore: 508 x 3.5 x 32 mm / 20 x 0.13 x 1.26" Rotational Speed (at rated load): 1000–1850 rpm Positioning & Feed: Cut-off Wheel Positioning Range: Y = 385 mm / 15.16", Z = 235 mm / 9.25" Max. Sample Height Under the Cut-off Wheel: No limitation Max. Positioning Speed: Y = 70 mm/s / 2.75"/s, Z = 50 mm/s / 1.97"/s Feed Speed Range: 0.1 – 10 mm/s / 0.002 – 0.2"/s (adjustable in steps of 0.1 mm/s / 0.002"/s) Cutting Force: 0–1400 N / 10–315 lbf Cutting Table: Fixed Table (Magnutom-400/-500): W x D 827 x 781 mm / 32.56 x 30.75" Optional X-Table: W x D (max): 942 x 781 mm / 37.10 x 30.75" W x D (min): 673 x 781 mm / 26.50 x 30.75" Travel Range (X-axis): 269 mm / 10.6" T-slots, Bi-directional: 12 mm / 0.48" Dimensions and Weight: Width: 1758 mm / 5' 9" Depth: 1463 mm / 4' 9" Height: 1882 mm / 6' 2" Weight: 2400 kg / 5291 lbs Cutting Chamber: Width: 1000 mm / 3' 3" Depth: 1206 mm / 3' 11" Height: 918 mm / 3' 0" Podpfeyfrucjx Aalspl Ambient Conditions: Operating Temperature: 5 – 40 °C / 41 – 104 °F Humidity: 0 – 95% RH, non-condensing

Condition: used, functionality: fully functional, mileage: 227,123 km, first registration: 05/2012, Year of construction: 2012, operating hours: 6,314 h, ASTRA HD9 84.48-80 with CIFA concrete mixer First Registration: 31/05/2012 – Euro 5 Ppedjyfn R Topfx Aaljl 227,123 km 6,314 hours 4 axles Fitted with CIFA SRY1300 – Auxiliary engine (the vehicle is equipped with brand-new machinery, concrete mixer replacement at seller's expense) Tyres: 40/50% tread remaining Valid inspection Good overall condition Available immediately WE CONSIDER TRADE-INS OF VEHICLES OF ALL MAKES, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER BODIES; OR EARTHMOVING EQUIPMENT FROM CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: like new (used), Working Width: 620 mm Feed Conveyor: Roller Height for Double-Sided Planing: 20 cm Height for Four-Sided Planing: 12 cm Motor Power: 5.5, 5.5, 7.5, 11 kW 3 Pulling Toothed Rollers Ppodpevupubefx Aalel Pulling Roller in the Table 2 Classic Four-Edge Shafts Vertical Adjustment of Side Spindles Toothed Roller in the Table at Material Entry Feed Speed: 11, 14, 19, 22, 28, 38 m/min

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, V2A; manway diameter approx. 505 mm; a small part of the containers is slightly higher with an overall height of approx. 1,720 mm; minor dents in the lower bottom; outlets slightly pressed into the lower bottom; on 1 container, 1 frame brace is bent Internal diameter: 1,120 mm Overall width: 1,200 mm Overall height: 1,680 mm Overall length: 1,200 mm Location: Bremen Nameplate: Volume: 1,000 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 900 mm Last application: Pharmaceuticals Pedpfx Aajyckf Usljpl TANK Supporting structure: frame EQUIPMENT Manway / dome: on top head Outlet: 72 mm Note: signs of use

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Equipment: Butterfly valve Design: Tank/container Remarks: Manhole diameter approx. 385 mm; two larger dents at the transition from the cylinder to the dish ends; slight corrosion inside the container Internal diameter: 1,190 mm Total height: 2,000 mm Max. overpressure: 0.49 bar Location: Bremen Nameplate: Ppjdpfx Aaoyckddolsl Volume: 1,000 liters Cylinder wall thickness: 2.5 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 730 mm Previous application: Pharmaceuticals TANK Bottom: Eccentric cone Support type: Feet Number of feet: 4 pieces EQUIPMENT Manhole/dome: in top head Outlet: 48 mm MATERIAL QUALITY Foot material: Stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 2.4 mm Top wall thickness: 2.5 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 1 h, Kiosk – Fully Equipped and Insulated Ppodpjyfih Tsfx Aalsl Modern, fully outfitted bakery kiosk designed for professional food retail operations. The unit is equipped with a complete ventilation system, rain-protective shutters, and air conditioning to guarantee optimal working conditions year-round. The kiosk is double-insulated with polystyrene and mineral wool for outstanding thermal efficiency. It features lockable windows and security shutters to provide additional protection outside business hours. For safety and surveillance, the kiosk is equipped with security cameras, motion sensors, and an alarm system. The structure stands on adjustable legs, ensuring perfect leveling on any surface, and operates on a three-phase power connection suitable for professional bakery equipment. The interior is fully furnished and includes a stainless-steel sink, adjustable shelving, a refrigerated display for chilled products, a heated display for hot foods, a beverage fridge, and an electric oven for warming baked goods—making the unit ready for immediate operation.

Condition: used, Year of construction: 1999, operating hours: 15,000 h, functionality: limited functionality, travel distance X-axis: 800 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, feed length X-axis: 800 mm, feed length Y-axis: 420 mm, feed length Z-axis: 610 mm, feed rate X-axis: 2,540 m/min, feed rate Y-axis: 2,540 m/min, feed rate Z-axis: 2,540 m/min, nominal power (apparent): 4 kVA, controller manufacturer: TRAK A.G.E, total height: 2,500 mm, total length: 2,600 mm, total width: 1,500 mm, table width: 320 mm, table length: 1,270 mm, table load: 600 kg, overall weight: 1,900 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 2,540 rpm, operating hours of spindle: 10,000 h, spindle motor power: 3,700 W, input voltage: 410 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Southwestern Industries TRAK DPM universal machining center, year of manufacture 1999. Model: TRAK DPM Serial number: 123895 Short-circuit breaking capacity: 200 kA Spindle motor voltage: 415 V Spindle motor phases: 3 phases Spindle motor frequency: 60 Hz Spindle motor rated current: 20 A CNC control unit voltage: 115 V CNC control unit phases: 1 phase CNC control unit frequency: 60 Hz CNC control unit rated current: 10 A Country of manufacture: Taiwan Mechanical handwheels for X, Y, and Z axes Can also be used as a conventional milling machine Psdpfx Asyffmroalepl If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Storage location: Nattheim Ppjdpfjvvkq Tex Aalol

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, total length: 3,900 mm, total height: 2,310 mm, overall weight: 950 kg, working length: 2,500 mm, working width: 600 mm, type of input current: three-phase, table height: 1,200 mm, table length: 2,500 mm, table width: 600 mm, STM/99 Pneumatic Frame Press – after technical inspection, ready for operation Ppsdsyffglspfx Aalel Specification: • Condition: used, after comprehensive inspection • Manufacturer: COSTRUZIONI MECCANICHE s.r.l. • Model: STM/99 • Working area: 2500 x 1200 mm • Pressure beam width: 60 cm • 3 vertical and 3 horizontal pressure units • Pneumatic clamping with adjustable pressure force • Original paintwork • Weight: 950 kg • Year of manufacture: 2003 • Machine complies with CE standards • Overall dimensions: 390 x 115 x 231 cm (L x W x H) Additional information: • Perfect technical and visual condition, factory standard • The photos show the actual condition of the offered machine • Possibility to power up and test the machine on site • The auction price does not include VAT or transportation costs Financing and transport: • We arrange transport via MDD fleet, courier companies, or third-party carriers • Financial support available in the form of leasing or lease loan