Used Str 701 for sale (9,127)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Hsdpfx Aaswc Rk Ej Eenp Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Hodpfx Aeun R N Aoa Eonp Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Hodpjwc Afhofx Aa Esnp Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: used, 1) 8 pcs. Dialog 4222 with extension display, black, €50/pc. 2) 2 pcs. Dialog 4223 with extension display, black, €70/pc. 3) 2 pcs. Dialog 4223 with extension display, white, €70/pc. Hedpewituajfx Aa Eonp

Condition: used, Bystronic Xpert 250x4100 - CNC Press Brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2D and 3D graphics control, ergonomic operating terminal with 15-inch color monitor - 8 axes (Y1, Y2, X, R, Z1, Z2, A1, A2) - AKAS laser safety device, manually adjustable in height - Hydraulic crowning - Air bending - Radius bending - Without tooling - Includes operating manual - Year of manufacture: 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm - Standard stroke: 265 mm - Installed height (clearance between lower and upper beam): 550 mm - Distance between side supports: 3750 mm - Overhang: 400 mm - Back gauge area: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - R-axis travel: 250 mm - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-working speed: 1 - 10 mm/s Hedpfxezizybj Aa Eonp - Y-working speed for robot operation: 1 - 12 mm/s - Y-return speed: 150 mm/s - Crowning: hydraulic - Adjustable support arms: 750 mm - Maximum surface pressure without wear strip: 100 N/mm2 - Maximum surface pressure with wear strip: 120 N/mm2 - Oil capacity (tank volume): 610 l - Noise emissions: 74 dB(A) - Main motor power: 22 kW - Voltage: 3x 400 V / 50/60 Hz - Transport dimensions WxHxD: 5200 x 3200 x 2100 mm - Weight: 19200 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 600 mm, saw blade diameter: 600 mm, overall weight: 550 kg, disc diameter: 600 mm, hole diameter of the disc: 30 mm, Crosscut saw - HYDRAULIC STROMAB TR 600 Engine 7.5 kW, 380 v, 16,5 A Weight: 550 kg In good working condition, ready for production Hsdpfx Ajxz S Dnja Esnp

Condition: used, System for depalletising empty beverage crates and palletising full beverage crates. The system consists of the following components: - Depalletiser (Matek/Packtech, 2001), robotic gripper arm with clamping grippers. Upgrades were carried out in 2017. - Palletiser (Matek/Packtech, 2001), robotic gripper arm with clamping grippers. - Pallet pressure control (Matek/Packtech, 2001) - 2 pallet magazines for good and defective pallets - Pallet labelling (2005) for applying ‘EAN 128’ labels - Pallet strapping (Strapex, 2005) - Pallet conveyors with loading and unloading stations Additional title: Complete palletising and depalletising system for beverage crates; manufactured Capacity: 44000 bo/h Formats: 0.5 L NRW bottles in 20-bottle and 9-bottle crates Hnedpfx Aaszizwae Eop Features: Depalletising robot; Palletising robot; Pallet inspection; 2 x pallet magazines; Pallet labelling; Pallet securing; Pallet transport; Pallet receiving and dispatch

Condition: excellent (used), JDK Type/Model: WDE-S1K-15/+ 15°C/004 Industrial Water Chiller JDK WDE-S1K-15/ Chiller | 400 V | R407C Description: For sale is an industrial water chiller / cooling unit (chiller) manufactured by JDK. The unit provides reliable cooling of water or water-glycol mixtures for machines, production facilities or technical processes. It is designed for continuous operation in industrial environments and features an integrated circulation pump, electronic temperature control as well as comprehensive safety and monitoring functions. Technical Data: Manufacturer: JDK Model: WDE-S1K-15 / +15°C Year of manufacture: 2021 Supply voltage: 400/230 V, 50 Hz Power consumption: max. approx. 15.5 A Refrigerant: R407C Compressor: Copeland Scroll Mobile on castors Protection class: IP43 Weight: approx. 270 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is provided without guarantee!) Hjdpjzix Ivjfx Aa Ejnp If you have further questions, please feel free to contact us by phone.

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: Hedpozixy Ssfx Aa Ejnp - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system - Badger Magnetics 8 kVA transformer (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Year of construction: 2015, condition: good (used), Deburring machine, used Hnedpfx Aaeikm Tkj Esp Manufacturer: NS Maquinas Industrial Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Power: 8 kW Number of cross belt stations: 1 Cross belt speed: 2-8 mm/s Feed rate: 0.6-3.2 mm Extraction system: Donaldson Used for edge rounding and removal of sharp edges on both the outer and inner contours of parts made of stainless steel, steel, or aluminum that have been cut in a laser, shear, or stamping machine. Dimensions: 2730x1740x1940 mm Weight: 1790 kg.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50984, 3 rows of 8 filters 4 bags Filter area: 31.2 m² RH 3500 mm Fan: 5.5 kW Diameter: 250 mm, reduced to 300 x 240 mm Mounting brackets Feet Lid and filter hoses Unfortunately, we cannot respond to inquiries that do not include complete contact information. Hodjiamtpopfx Aa Eenp

Condition: excellent (used), functionality: fully functional, mileage: 533,369 km, power: 309 kW (420.12 HP), first registration: 08/2015, fuel type: diesel, empty load weight: 12,030 kg, maximum load weight: 13,970 kg, overall weight: 26,000 kg, axle configuration: 6x2, next inspection (TÜV): 10/2026, fuel: diesel, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2015, Equipment: air conditioning, electric window regulation, full service history, tail-lift, trailer coupling, IVECO Stralis AS260S46/2x, with drop-side body and tilting wall/web trailer. / TÜV valid until 10/2026 • Manufacturer: Iveco • Model: Stralis AS260S46 • Mileage: 533,369 km • First registration: 08/21/2015 • Power: 309 kW / 420 hp • Transmission: Automatic Hjdpozin Ulsfx Aa Esnp • Drop-side body: Dautel 250010 • Body: Ewers tilting body Hurowa Plus PR-L • Internal dimensions: • Length: 8 meters • Width: 2.45 meters • Height: 2.10 meters • For beverage transport • Long-haul cab • Rear view camera • Air conditioning • Cruise control • Lane keeping assist • Differential lock • ESP • 2 x trailer hitch • TÜV: October 2026 • Unladen weight: 12,030 kg • Payload: 13,970 kg • Permissible total weight: 26,000 kg • Euro: 6 _____ WEB PRASQ 18 • Manufacturer: WEB • Model: PRASQ 18 • First registration: 08/21/2015 • Body: Ewers tilting wall body Hurowa Plus PR-L • Drop-side body: Dautel 250010 • Turntable • Internal dimensions: • Length: 6.55 meters • Width: 2.45 meters • Height: 2.2 meters • TÜV: October 2026 • Unladen weight: 5,060 kg • Payload: 12,940 kg • Permissible total weight: 18,000 kg • German vehicle • German registration documents • Immediately ready for use • This offer is non-binding and subject to change. • Subject to prior sale. • Errors and/or typos not excluded. • Sale subject to our general terms and conditions.

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) Hnedpfszimaaox Aa Esp - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Technical details x-travel 2800 mm y-travel 2200 mm z-travel 800 mm Control Heidenhain iTNC 530 table surface area 3000 x 1200 mm tool taper HSK-A-63 spindle turning speed range 18000 U/min power capacity 18 kW feed range 35000 mm/min total power requirement 68,7 kW dimensions of the machine ca. 12,4 x 3,5 x 4,6 m Additional information The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Hnjdozil Ezjpfx Aa Esp Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no coolant through spindle) Chip conveyor

Condition: not inspected (used), Industrial enclosure Previously used as a measuring room Hnedpfxezilmxo Aa Eep Completely enclosed industrial enclosure Dimensions Roller shutter door approx. 3500 × 2960 × 2960 mm Complete enclosure approx. 22,000 × 15,000 × 9,000 mm Lifting equipment ABUS overhead crane Load capacity: 1 ton Ventilation and air conditioning system 2 outdoor units from Mitsubishi Electric Mitsubishi Unit 1 Type: PUZ-M125VKA2 Year of manufacture: 2022 Mitsubishi Unit 2 Type: PUZ-M125VKA2 Year of manufacture: 2022

Condition: ready for operation (used), Press force: 420kN, specific pressing force: 60N/cm², motor power: 22kW, max. theoretical throughput: 2000kg/h, filling height: 950mm, bale dimensions: 1000x720x1200mm, max. bale weight: 600kg, width: 2000mm, height: 2150mm. An on-site inspection is possible. Hnedszk Narspfx Aa Eep

Condition: used, Year of construction: 2007, Bystronic AFM EP 31-160 - CNC Press Brake Bending length: 3100 mm Capacity: 160 t - Cybelec DNC 880S CNC control - Laser safety device - Hydraulic crowning - Air bending - incl. many tools - incl. operating manual - Operating hours: 7266 - Bending cycles: 315673 - Year of manufacture: 2007 Technical data - Capacity: 160 t - Table length: 3150 mm - Work table width: 60 mm - Working height: 920 mm - Distance between side frames: 2450 mm - Overhang: 300 mm - Opening height: 465 mm - Number of cylinders: 2 - Stroke: 200 mm - Approach speed: 100 mm/s - Bending speed: 9.8 mm/s - Retraction speed: 95 mm/s - Tilting of the upper beam: +/- 13 mm - Crowning: Hydraulic - Air bending: Yes - Adjustment of the upper tool: Manual - Adjustment of the die: Manual - Number of fingers on the ram: 2 - X-axis travel of the ram: 600 mm - X-axis movement: 600 mm - Min. X-axis movement speed: 400 mm/s Hsdpfxeziduze Aa Eenp - R-axis movement: 150 mm - R-axis traverse speed: 150 mm/s - Z1-Z2 movement: 2400 mm - Z1-Z2 traverse speed: Manual - Accuracy of the X-axis: 0.1 mm - Accuracy of the Y-axis: 0.01 mm - Accuracy R-Z1-Z2: 0.1 mm - Accuracy Z1-Z2: Manual - Above-floor installation: Yes - Machine dimensions WxHxD: 4100 x 2680 x 2200 mm - Motor power: 15 kW - Machine weight: 9400 kg

Condition: used, Cutting area: 5300 x 2200 mm Cutting depth: 80 mm Location: Nattheim Hedpfx Aaeynttfo Ejnp

Condition: new, sheet thickness: 45upper roll diameter: 460prebending: 35sheet length: 2600Bottom Roll Diameter: 420Side Roll: 360messurements (LxWxH): 5770 x 2300 x 2585weight approx.: 28500motor: 30 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.500,-- - Automatic material extractor - PLC control Hsdod Ab Rhspfx Aa Eonp - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, This listing is for a Grant Instruments QBD1 Digital Dry Block Heater. (1 of 2 available) The unit is in full working condition and is ready for immediate release. Discover the precision and efficiency of the Grant QBD1 Digital Dry Block Heater, designed to meet the rigorous demands of modern laboratories. This high-precision heating system offers exceptional temperature control, making it ideal for a variety of applications, including enzyme digestions, nucleic acid hybridizations, and general laboratory tasks. Key Features: Wide Temperature Range: Operates from ambient +5°C to 130°C, providing versatility for various heating needs. Single Block Position: Equipped with one removable and interchangeable block, allowing for easy customization based on your specific requirements. Digital Temperature Control: Enjoy precise temperature management with stability and uniformity of ±0.1°C, ensuring reliable results every time. Rapid Heat-Up Time: Quickly reaches your desired temperature, enhancing workflow efficiency in busy lab environments. Hnsdpfxjxv Az He Aa Eep Integral Timer Function: Optional external probe capability allows for accurate in-sample or in-block temperature monitoring. Technical Specifications: Dimensions: 200 x 240 x 120 mm (w x d x h) Robust and Compact Design: Features a contemporary design and includes a block extraction tool for safe and easy block removal. Benefits: High Precision: Achieve consistent and accurate heating for sensitive experiments. User-Friendly: The intuitive design ensures ease of use, making it suitable for both experienced and novice lab personnel. Durable Construction: Built to withstand the demands of daily laboratory use, ensuring long-lasting performance. Elevate your laboratory's capabilities with the Grant QBD1 Digital Dry Block Heater. Experience unmatched precision and reliability, making it an essential tool for any scientific setting.

Condition: used, Year of construction: 1993, Overview  This shrink packer was manufactured in 1993 by France POLYPACK INDUSTRIES. The machine is designed for shrink wrapping of PET bottles using neutral film with sealing bar. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Hnsdpfxjy Etqme Aa Esp Technical data  - Capacity: approx. 20 ppm - Formats: - 1.5 L – 3×2 - 2.0 L – 3×2 - Application: Shrink packaging of PET bottles - Configuration: Shrink packer with sealing bar (film only)

Condition: new, Frequency inverter Hnodpfx Aaozabkcs Eop

Condition: excellent (used), Year of construction: 2020, Machine used in the fish packing plant, used for washing squid in good condition like new Hedpfx Aov T Rllsa Esnp

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SEW400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Stock: approx. 29 linear meters – Price is per meter! Type BD2C-3-400-SB3 / 400 Amps – 5-pole – L1 L2 L3 N PE – copper – no aluminum conductors! Rated voltage Ui max. 690V, frequency 50 – 60 Hz Busbar lengths: 17x 3.25m, 1x 2.25m, 5x 1.25m Price per meter includes connectors, end caps, and mounting brackets Feed-in and distribution boxes in 16-32-63-125-250A are available as options Dismantling was carried out by a certified electrician. Hedsw Etm Ispfx Aa Eonp Busbars are in excellent condition!!!! Please inquire for your required lengths or accessories! In stock, available immediately!!! Attention: 100A, 160A, 250A, and 400A busbars are also available – please inquire!!! ----- Old Klöckner Moeller BD1 system still available! Busbars, elbow sections, feeders, and distribution boxes for the old Klöckner Moeller BD1 / BD 1 system in stock!!! Are you also looking for a crane system?

Condition: used, Year of construction: 2002, total length: 5,700 mm, total width: 1,600 mm, total height: 2,800 mm, Colour: White Weight: 750 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 32604 - Max. cutting height vertical [mm]: 2070 - Max. cutting height horizontal [mm]: 4600 - Max. cutting width [mm]: 4600 - Max. cutting depth [mm]: 60 - Min. saw blade diameter [mm]: 240 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 8.4 - Fuse [A]: 16 Hnodszh Hqvjpfx Aa Esp - Power [kW]: 3.0 - Transport dimensions: 5700mm x 1600mm x 2800mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels