Used Sterilizer for sale (205)

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Ijdpjx T Aqfsfx Aa Ejid Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Condition: used, Sterilizable universal filter for sterilization filtration. Stationary sheet filter with square filter elements in a vertical row arrangement, hydraulic filter sheet pressure. Hydraulic control from built-in electrical control panel. Additional title: Sterilisation filter, years of manufacture 1979-2010 Capacity approx.: 750 hl/h Sheet filter - filtration area approx. 356 - 493m2 Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Vertical row arrangement Material: Stainless steel Position: Horizontal Base construction: Frame Iiedpfx Asxbn N Hsa Eod Features: Filter sheets; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Condition: used, Year of construction: 2001, PET single-use filling line for water, soft drinks and fruit spritzers. Bottle formats: 0.5 L, 1.0 L, 1.5 L Nominal output: 24,000 bottles/hour (with 1.0 L) The new bottles are destacked on pallets at the new bottle unstacker and transported pneumatically to the rinser. The system consists of: - Markant 1ASH-PL new bottle unstacker Manufacturer: KHS Year of manufacture: 2001 - Pneumatic bottle transport Manufacturer: KHS Year of manufacture: 2001 - Premix system Intermix 240 EIÜD Manufacturer: Ortmann & Herbst Year of manufacture: 1978 with downstream Velcorin dosing - PET rinser: Innoclean FR-ZR 70/113, 1 B/RL Manufacturer: KHS Year of manufacture: 2001 With chlorine dioxide and sterile water rinsing - PET filler Innofill DRV-VF-PET Manufacturer: KHS Year of manufacture: 2001 With Alcoa screw capper and liquid nitrogen dosing - Fill level control Manufacturer: miho Year of manufacture: 1992 - Container transport Manufacturer: KHS Year of manufacture: 2001 - Labelling machine for wrap-around labels Manufacturer: KHS Year of manufacture: 2003 With hot melt glue melter and best-before date printer Iodpexhd Apjfx Aa Eoid Features: New glass removal system; pneumatic bottle transport; premix; rinser/filler/capper; fill level control; container transport; labelling machine

Condition: used, Year of construction: 2004, Capper for twist-off caps. With lid storage container and lid sorting system for positioning and transporting lids to the capper. Injection of the lids with sterile steam. Additional title: for twist-off caps Capacity appr.: 6000 bo/h Power: 4 kW Current: 8 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar, 80 NL/min Formats: twist off caps, bottle diameter 18-80 mm, bottle height 35-200 mm Running direction: left -> right Operation / Control: touch panel on switch cabinet Iiedpfx Aajw Tmn He Eed Features: switch cabinet with touch panel, storage container. Lid sorter (O.Z.A.F.), lid transport

Year of construction: 2001, condition: used, Combined rinser and filler for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Output: 24,000 bottles/h A chlorine dioxide dosing unit and a sterile water supply are connected to the rinser. The filler is equipped with a screw capper. The filling quantity is controlled via flow measurement. Liquid nitrogen dosing is possible via a mobile system. Additional title: PET bottle sanitising and filling system Capacity: 24000 b/h Iijdpfx Aox T Andoa Esd Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles Running direction: left -> right Operation / Control: Touch-Panel / Simatic S 7 Material: mainly stainless steel Position: free standing Features: Stainless steel enclosure, plexiglass protective screen opening upwards; 70 rinsing valves on the rinser; 80 filling valves; filling quantity recording via IDM; Alcoa capper 28 mm Bericap; Prominent chlorine dioxide dosing; filtration system for sterile water, mobile liquid nitrogen dosing; pneumatic screw cap feed (approx. 25 m); 2 basements for a total of 3 mesh box pallets with screw caps

Year of construction: 1983, condition: used, Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually Additional title: with switch cabinet and CIP tank Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system Iisdjvcqt Ujpfx Aa Eed

Condition: used, Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - Cleaning lance for dispensing tanks - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrigeration dryer - Water treatment (PENTAIR) - Refrigeration system with compressor, buffer tank, equalising tank, refrigerant pump - Pipework Additional title: 10 hl brewhouse with storage tanks and supply technology, largely built in 2019 Cast wort capacity: 1000 l Iijdpfx Ajxwyzasa Esd Material: Brewhouse from stainless steel Features: Mash/wort kettle, lauter tun, whirlpool, wort cooling, wort aeration, hot water tank, 5 x cylindroconical storage tank, booster pump, beer pump, CO2 warning device; cleaning lance, pressure reducer, tap heads, hoses, refrigeration system, compressed air system, electric steam generator, water treatment, pipework

Condition: used, Year of construction: 2004, operating hours: 2,000 h, Used Pasteurizer brand PG Completely Overhauled Used Pasteurizer Completely Overhauled for jars or cans in d.b. PG brand, all stainless steel with squared stainless steel mesh, complete with 4 water recycling tanks with relative pumps. Pasteurizer equipment for sale with inlet and outlet belt, blower for drying jars or boxes at the outlet, steam modulating group, shell and tube heat exchanger, various pipes connections, and all its accessories for operation. The pasteurizer equipment for sale is totally overhauled Pasteurizer equipment is made up of two sectors of 9500 mm each Overall dimensions of the Used Pasteurizer PG: Total length 19.00 m Useful belt length axis by axis: 18.60 ms Useful net width 2.50 m. Overall width 2.70 m machine body Overall width including trays 3.30 m Total useful area of the Used Pasteurizer Completely Overhauled sq.m. 46 Features by section: Sterilization length: mm. 8,600 Pre-cooling length: mm. 2,500 Length of warm water cooling: mm. 5,000 Cooling length: mm 1900 Single track entry belt width: mm 150 Length: mm 3800 Outfeed belt with 4 lanes width: mm 350 Pasteurizer equipment for sell length: mm 3500 Services for pasteurizer equipment for sell: We also offer the machinery reinstallation service at your company if you need it. We will create a dedicated offer if you wish, only after receiving all the necessary information. Upon request, we can also modulate the control panel and intervene on the machine’s PLC. This is used to customize the functionality of the used pasteurizer for sale. If requested, we also provide the packing service if the goods are destined abroad and with transport by ship. One of our team of technicians will be at your service and will create a tailor-made project for your company. We have many solutions available for this pasteurizer equipment for sell, contact us at the numbers on the site for more information and to receive a quote for one of our used bottling machines. Additional information: Iiodpovguhwefx Aa Eed For this pasteurizer equipment for sell it is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized. The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: used, Year of construction: 2006, Tecnoindustria Used Pasteurizer Completely Overhauled Tecnoindustria brand mesh pasteurizer all stainless steel with squared stainless steel mesh complete with water recycling tanks with relative pumps, infeed and outfeed belt for jars or boxes, blower for drying jars or boxes, steam modulating group, heat exchanger, various connecting pipes and all its accessories for operation. The machine is totally overhauled It is made up of two sectors of which: first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400 Features by section Sterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,300 useful Length of warm water cooling + cooling: mm. 7,000 useful Ijdpfx Aaevguhke Esid Height mm 1400 Single track entry belt width: mm 200 Length: mm 3200 Single lane outfeed belt with Intralox belt width: mm 400 length: mm 3700 useful Tecnoindustria Used Pasteurizer Completely Overhauled, The machine is totally overhauled, in excellent condition. It is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized. The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: used, operating hours: 1,800 h, Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Isdowgw Dgjpfx Aa Eeid Performance Output by Bottle Format Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,000 bottles per hour. Therefore, this production speed suits medium-scale wineries that require flexibility while maintaining industrial performance. Commissioning, Runtime, and Immediate Availability Technicians installed the line in 2022. Since that time, it has operated for 1,800 hours and produced approximately 2,400,000 bottles. The system continues to run in production, which means it remains in good operational condition. Furthermore, its immediate availability offers an advantage to wineries needing rapid deployment. Because of this, buyers can integrate the equipment without significant downtime. Primary Bottling Block: Depalletizing, Rinsing, Filling, and Capping The process starts with a Duetti Packaging depalletizer, model M, which automatically feeds empty bottles into the system. Subsequently, the GAI monoblock, model 4033RES-HP-A01, performs rinsing, filling, and capping in a single integrated unit. The dual-stage rinser (water + gas) uses 16 grippers to sanitize bottles. A high-pressure electropneumatic filler with 24 valves carries out isobaric filling. Notably, the 3-head rotary corker applies straight corks, champagne-style mushroom corks, plastic closures, and aluminum screw caps. Moreover, the monoblock includes multi-format screws, motorized guide adjustments, dummy bottles for internal rinser sterilization, and a solenoid valve kit to switch between gas and cleaning liquid inputs. Altogether, this configuration provides high precision, minimal changeover time, and excellent bottle handling. CIP and Quality Control: Cleaning and Inspection Systems To maintain hygiene, the WIN&TECH CIP unit, model Win&Guard C 23.05, manages automatic cleaning via a steam-water heat exchanger and a three-stage filtration system across two independent circuits. Additionally, this system allows operators to sanitize the internal components between production runs without disassembly. At the same time, the CMP inspection unit, model CV-MUF108, performs continuous quality control.

Condition: used, Year of construction: 2021, operating hours: 274 h, machine/vehicle number: R86, Used Terta Pak A3Flex 600V 500SlimTechnical Specifications & Performance DataThis aseptic carton filling machine is engineered for high-efficiency beverage production and industrial packaging environments. Manufactured by Tetra Pak, the A3 Flex platform is widely recognized for its reliability and consistency in aseptic operations. Configured in the 600V variant and set up for the TBA 500 Slim format, it provides dependable throughput for second hand operations and integration into a used bottling line.Manufacturer: Tetra PakModel: A3 FlexConfiguration: 600V, TBA 500 SlimYear of manufacture: 2021Operating hours: 274 hProduction speed: up to 8,000 packs/hourFormat compatibility: 0.5L (500 Slim)Container types: Carton (aseptic)Drawing specification: 648575-0600Machine category: Aseptic filling machineAdvanced Automation & Control SystemsThe A3 Flex platform features integrated automation designed to support consistent aseptic performance and straightforward operation. The HMI provides real-time counters and process visibility; profiles such as TBA_500_Slim enable format-specific settings that help streamline operation. The control architecture supports recipe-based adjustments and guided workflows to maintain process stability.Operator-friendly HMI with counters and production monitoringRecipe/profile management for configured format (TBA 500 Slim)PLC-based controls with diagnostics and alarmsSafety interlocks and guarded access in critical areasDesigned for efficient changeovers within the configured format scopeProduction Line Integration CapabilitiesThis aseptic filling machine integrates smoothly into complete packaging lines and can operate as a standalone unit in industrial packaging environments. It is suitable for beverage production requiring aseptic carton handling and complements upstream packaging material supply and downstream conveying and end-of-line equipment.Inline or standalone operation for flexible plant layoutsInterfaces with upstream packaging material handling and sterilization systemsCompatible with downstream conveyors, case packing, and palletizing solutionsConfigured for 0.5L Slim cartons; additional formats may be supported with appropriate kitsMachine Condition & Maintenance HistoryThe unit is second hand and ready for operation. With only 274 operating hours and a 2021 build year, it presents low wear for its age class. Visual counters confirm the recorded operating time. The machine is positioned for rapid recommissioning in a professional beverage packaging setting.Year 2021, low operating hours (274 h)Second hand equipment, ready for operationCommercial-grade aseptic design suitable for continuous dutyOperational Performance & VersatilityDesigned for aseptic carton packaging, this filler delivers consistent forming, filling, and sealing per... Iisdoy Icpwspfx Aa Esd

Condition: reconditioned (used), functionality: fully functional, The Barriquand Steriflow 1341 Autoclave is an essential asset for all food processing industries looking to optimize their sterilization processes. Featuring advanced technology and a precise control system, it ensures uniform heat treatment throughout the entire cycle. This guarantees optimal product safety while preserving taste and nutritional qualities. This model stands out for its high reliability and large capacity, making it perfectly suited for industrial-scale operations. Additionally, its reinforced stainless steel construction ensures durable corrosion resistance, while facilitating cleaning and daily maintenance. The fully automated cycles deliver consistently reliable results and significantly reduce the risk of human error. Its intuitive control panel, combined with highly flexible programmability, allows you full control over temperature, pressure, and processing time parameters. This makes it easy to tailor each cycle to suit a wide variety of products, including canned goods, ready meals, sauces, and jarred foods. Iiodpsxg Ec Iefx Aa Eed Investing in this autoclave means choosing proven technology that complies with European standards, boosting not only your products’ shelf life but also the overall performance of your production line. Technical specifications: • Vessel diameter: 1550 mm • Maximum temperature: up to 135 °C • Operating pressure: 2 to 2.5 bar • Power supply: 400 V three-phase • Approximate dimensions: L 834 cm x W 160 cm x H 220 cm

Condition: used, This listing is for the Transmed Sahara 111 Maxitherm Blood Warmer. The unit is in full working condition and ready for immediate use. High-performance dry-heating system designed for safe warming of blood products, plasma, and infusion solutions while reducing contamination risks in sterile clinical and laboratory environments. Transparency Report and Technical Audit: Ijdpfey R U R Sex Aa Ejid • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Year of construction: 2004, Hänel Rotomat 400 Paternoster The Hänel Rotomat 400 is a vertical carousel storage system (paternoster) that operates on the "goods-to-user" principle; it is used for both industrial storage and as an office lift for archiving purposes. The system makes optimal use of available ceiling height to maximize storage capacity within a minimal footprint. Areas of Application The Hänel Rotomat 400 is used across various sectors: Industry: For storing tools, measuring instruments, electronic components, and small parts. Office & Administration: As an automated archiving system for hanging files or binders. Medical Sector: For the sterile storage of surgical instruments. Overall dimensions (L): 260 cm Overall dimensions (W): 130 cm Overall dimensions (H): 285 cm Permissible shelf load: 150 kg Power supply: 3~ N+PE 400V / 50Hz / 5.5 kW Iiodpfxsy Nxp Ao Aa Ejd Year of manufacture: 2004 Enhance your Paternoster A carousel storage system is only as efficient as its internal layout. Our specially designed storage bins utilize every last millimeter of shelf space. Find the right dimensions for your system in our other auctions. "A complete solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more storage lifts—both new and used—in our shop! International shipping costs available upon request!

Condition: used, This listing is for 1 of 3 Watson Marlow 630S Peristaltic Pumps These units are in full working condition and ready for immediate use A peristaltic pump moves fluid through a flexible tube by sequentially compressing the tube (like a wave) which pushes the fluid forward. Because only the inner surface of the tube contacts the fluid, the pump mechanism is isolated from the fluid — this is useful for: Handling corrosive, abrasive or sterile fluids Avoiding contamination (the pump body doesn’t contact the fluid) Iiodpfxsxhdtbo Aa Eod Easy maintenance (replace the tubing rather than the pump’s internal components) Watson‑Marlow is a well-known maker of such pumps in lab, process, pharmaceutical, chemical, water treatment, and industrial settings. Typical applications / use cases Because of the flexibility, purity, and control of peristaltic pumps, the 630S is used in: Chemical dosing / metering (acid, base, reagents) Pharmaceutical / biotech processes Water / wastewater treatment Food & beverage (for sterile or food-contact fluids) Laboratory and pilot-scale processing

Condition: used, This listing is for 1 of 6 Parker SciLog SciPres Pressure Monitor with Pressure Sensors The unit is in full working condition and is ready for immediate release. This Unit is Supplied with Scilog Scipress pressure sensorsand cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Applications: Ijdpfxjxxx Tqs Aa Eeid - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations

Condition: used, This item is unused and in the original packaging We have a quantity available The InPro 3253SG 120/PT1000 is an in-line industrial pH electrode (probe) intended for continuous process measurement rather than simple lab spot checks. It integrates both the pH sensing element and temperature compensation in a single unit, allowing accurate, real-time pH measurement in process lines, tanks, fermenters and reactors Physical & Mechanical - Sensor shaft length: ~120 mm — relatively short, good for installations with limited insertion depth. - Process connection: Pg 13.5 threaded connection. - Connector type: VP industrial connector for secure integration. Iijdoy Iw Etspfx Aa Ejd - Pressure rating: Up to ~4 bar gauge. Temperature & Compensation - Built-in PT1000 temperature sensor — provides temperature compensation for accurate pH reading. - Operating range: ~0 °C to ~100 °C. Sensing & Reference System - Glass pH sensing membrane with a pre-pressurized liquid electrolyte system — lowers maintenance and improves stability. - Ceramic diaphragm — stable reference junction. - Argenthal silver-ion trap cartridge — improves reference performance, especially in environments containing sulfides. - Sterilisation & Hygiene - Sterilisable/autoclavable — built to withstand repeated steam sterilization or autoclave cycles without losing calibration or performance. Certifications & Approvals - Typically supplied with industrial and safety certifications (e.g., ATEX, IECEx and CE) for use in hazardous zones and hygienic processing. pH Range - Suitable for pH measurement typically within 0 to 12 (depending on membrane type). Summary In essence, the Mettler Toledo InPro 3253/120/PT1000 is a high-performance industrial pH electrode designed for robust, low-maintenance in-line monitoring with integrated temperature compensation, suitable for sterilizable and process‐critical environments. Its pre-pressurized reference and rugged build help deliver stable pH measurements in demanding applications.

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet with Stand The unit is in full working condition and is ready for immediate use The BioMat 2 is a Class II microbiological safety cabinet also known as a biosafety cabinet designed to protect the user, the sample (or product), and the environment during handling of potentially hazardous or sterile biological materials Key Features & Capabilities Protection & Compliance Meets the European standard EN 12469:2000 for microbiological safety cabinets It shields both the operator and the product through an inward air curtain (front sash) and sterile downflow over the work surface. Aerosols and contaminants are filtered through HEPA filters before being exhausted or recirculated Construction & Safety Built with a 1.5 mm mild steel outer shell and 304 stainless steel interior. Side panels are made from 5 mm UV-resistant toughened glass Iiedpfxexhfkbj Aa Ejd Include safety alarms, airflow monitoring, and robust sealing under negative pressure to prevent leaks

Condition: used, This listing is for a Walker Safety Cabiets All-In-One Fumigation Unit. The unit is in full working condition and is ready for immediate release. The Walker Safety Cabinets All-In-One Fumigation Unit is an innovative and compact solution for fumigating safety cabinets of all makes and models. Designed with efficiency and convenience in mind, this unit combines a built-in boiler and a carbon filtration system into one easy-to-use device. Key Features: - Compact Design: Height: Less than 200 mm, allowing it to fit inside a typical safety cabinet opening without the need to open the door further. Iedpsxxx R Nefx Aa Eeid - Integrated System: Combines a boiler and carbon filtration system, ensuring comprehensive fumigation in a single device. - Capacity: Maximum capacity of 30 ml of formaldehyde and 30 ml of water, making it effective and economical for fumigation processes. - Carbon Filtration: Replaceable Carbon Granules: Requires replacement after each use to ensure optimal performance. - Fresh Supply: Carbon granules are inexpensive and readily available, with a typical shelf life of approximately 18 months. - Walker Safety Cabinets ensures quick delivery of replacement granules for uninterrupted operation. - Benefits: Versatile Compatibility: Effective for fumigation of all safety cabinet brands and models. - Efficient Operation: The compact, integrated design minimizes space requirements while maximizing performance. - Cost-Effective Maintenance: Affordable and easy-to-replace carbon granules keep operating costs low. Applications: - The All-In-One Fumigation Unit is ideal for laboratories and facilities that require effective and convenient fumigation of safety cabinets, ensuring a safe and sterile work environment.

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 Iisdpfxexm Rwqj Aa Ejd 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: Iedpfox S Ipwsx Aa Eeid - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: like new (used), ASEPTIC POUCH FILLER WITH DOUBLE 1" FILLING HEAD The aseptic filler is a machine designed to fill pre-sterilized flexible containers with a pressure cap under aseptic conditions (i.e., absence of bacteria). Prepared for filling 200L and 1000L drums. * Production capacity may vary depending on format and product to be filled. INCLUDES: - Infeed and outfeed aseptic drum roller conveyor. - Internal electrical panel. Iiodpfsx S Hq Tox Aa Eod - Touch screen. - Hydraulic equipment.

Condition: like new (used), functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Rotary autoclaves: These are used to sterilize products that present greater difficulties in heat transmission. Examples include vegetables in grains, grated or diced, and beverages such as milkshakes, teas, coffees, or evaporated milk. In this type, the basket rotates inside the autoclave, stirring the contents and preventing the pieces closest to the sides of the vessel from roasting. Distance between rollers: Iijdpox Tiliofx Aa Esd

Condition: like new (used), COMPRESSED AIR PRESSURE: 8 BAR COMPRESSED AIR CONSUMPTION: 100 NL/MIN STEAM SATURATED DRY PRESSURE: 4 BAR STEAM CONSUMPTION: 40 KG/H WATER CONSUMPTION: 0.9 L/H. PRODUCTION OF 200 KG BAGS: 60 BAGS/HOUR. PRODUCTION OF 5-20 KG BAGS: 160 BAGS/HOUR CONTROL PANEL PROTECTION DEGREE: IP55 VOLTAGE: 220/380 V READY FOR FILLING 250L AND 1,000L DRUMS. Isdpfx Aaoyni Hze Ejid - Production capacity depends on the format and product to be filled. Packaging: Pre-sterilized flexible bags in pre-palletized drums - Up to 160 bags/hour (5 lt – 20 lt) - Up to 60 bags/hour (200 lt) - Up to 15 bags/hour (1,000 lt) Machine complete with roller conveyor for pallet infeed. Excellent condition.

Condition: used, functionality: fully functional, COMPRESSED AIR PRESSURE: 8 BAR COMPRESSED AIR CONSUMPTION: 100 NL/MIN STEAM SATURATED DRY PRESSURE: 4 BAR STEAM CONSUMPTION: 40 KG/H WATER CONSUMPTION: 0.9 L/H. PRODUCTION 1000 KG BAGS: 15 BAGS/HOUR. PRODUCTION 200 KG BAGS: 60 BAGS/HOUR. PRODUCTION 5-20 KG BAGS: 160 BAGS/HOUR PROTECTION DEGREE CONTROL PANEL: IP55 VOLTAGE: 220/380V READY TO FILL 250L AND 1,000L DRUMS. - Production will depend on the format and product to be filled. Packaging: Pre-sterilized flexible bags in pre-palletized drums - Up to 160 bags / hour 5 lt - 20 lt; - Up to 60 bags per hour 200 lt; - Up to 15 bags per hour 1000 lt Machine complete with roller conveyor for pallet infeed. Excellent condition. Dimensions of TRANSFER OF FILLED FULL PALLETS OUTPUT LENGTH: 5M WIDTH: 1.75M USEFUL WIDTH: 1.20M HEIGHT: 1.95 Iiodpfxownnzro Aa Eed