Used Spring End Grinding Machine for sale (70,567)

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Technical Data – Grinding Machine Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Bcodpswvgidofx Aafju Feed rate (hod/min): 150 Table load (kg): 20 Control: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. If you have further questions, I am at your disposal.

Condition: excellent (used), thread dia. 5 - 200 mm grinding length 500 mm thread pitch 0,25 - 6 mm clamping length max. 850 mm grinding wheel diameter 350 mm centre height 105 mm thread M2 - M149 thread - inch 3/32 - 4 inch. inclination li/re +/-10 ° total power requirement 6 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,5 x 1,7 x 1,5 m Bcodpfx Aaowvl H Usfju

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Bjdpslbgfcofx Aafscu Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: used, Year of construction: 2002, functionality: fully functional, Grinding machine Brand: Studer Model: S20 Favorit Bcodpeyc Tc Nefx Aafou Year: 2002

Condition: used, Year of construction: 2011, Tube Grinding Machine – Custom-Built - Tube grinding machine with CE marking - Suitable for grinding or surface pre-treatment of various pipes - Used for galvanized steel pipes as surface pre-treatment before painting - Can be modified for other materials (requires different abrasive belts and possibly adjustments to the feed system) - Control system: Mitsubishi - Automatic infeed and outfeed from the machine - Multiple pipes can be loaded, processed sequentially, and temporarily stored after processing - Pipes are picked up by grippers and guided through the machine to the outfeed - Includes Felder RL125 extraction system for grinding dust removal - Requires compressed air for operation - Machine is sold without safety equipment - Year of manufacture: 2011 Technical data - Min. pipe diameter: 76 mm - Max. pipe diameter: 200 mm Bcedpsx E T Swsfx Aafju - Min. pipe length: 3,600 mm - Max. pipe length: 10,000 mm - Connected load (grinding machine): 6.75 kW - Connected load (extraction): 3 kW - Footprint (without extraction unit): 2,500 x 20,500 mm

Condition: used, Technical details: Bcjdpfew Rktbsx Aafou grinding diameter: 600 mm grinding length: 2600 mm centre height: 180 mm workpiece diameter - max.: 360 mm swing diameter: 600 mm grinding wheel diameter: 600 x 305 x 160 mm total power requirement: 17,6 kW coolant device: 90 l/min work piece spindle speed: 12,5-250 U/min feed continuous: 0,05 - 6,0 mm weight of the machine ca.: 8,2 t dimension machine xH: 6,4 x 2,2 x 1,9 mm Final balance balancing device Tailstock with cylinder error correction Digital display X=0.001 - Z=0.01 Radius device 2-10 mm *

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Bcjdpfxevygwwo Aafju Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2017, functionality: fully functional, grinding length: 630 mm, grinding width: 330 mm, electro magnet plate coolant device Technische Daten / technical details: gr. Schleiflänge / max. grinding length 630 mm gr. Schleifbreite / max. grinding width 330 mm Magnetspannplatte / magnet clamping plate 630x300 mm Längsweg Tisch / longitudinal travel table 765 mm Schleifscheibenabmessungen / grinding wheel dimensions 400x40x203 mm Antriebsleistung / drive capacity 7,5 kW Gewicht der Maschine / weight 2800 kg Bcedsudv Hwopfx Aafou Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding length: 500 mm, grinding width: 300 mm, feed length X-axis: 600 mm, feed length Y-axis: 475 mm, feed length Z-axis: 275 mm, table length: 500 mm, overall weight: 3,700 kg, - control SPS NK - electro magnet - coolant device - 3 grinding wheels, some flanges Technische Daten / technical details: Schleiflänge / grinding length 500 mm Schleifbreite / grinding width 300 mm Schleifhöhe / grinding height 475 mm Elektromagnetabmessungen / electro magnet dimensions 500x300 mm Bcjdpfowrmcpex Aafeu Längsachse X / table travel X 600 mm Querachse Z / cross travel Z 270 mm Vertikalachse Y / vertical travel Y 475 mm Drehzahl Schleifscheibe / speed of grinding wheel 1440/2900 UpM / rpm Schleifscheibe / grinding wheel 300x50x76,2 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,7 kW Gewicht der Maschine ca. / weight ca. 3700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Stock number: 3064 Bodpfoygclzex Aafecu Manufacturer: TOS Year of construction: Machine number: 179875 Type / Model: BU 16 Control: conventional Maximum grinding diameter: 160 mm Grinding length: 320 mm Centre height: 125 mm Clamping range between centres: 250 mm Grinding wheel diameter x width x bore: 300 x 32 x 76 mm Table speed: 0.05 to 7 m/min Table swivel angle: +/- 10° Rotation of grinding spindle headstock: +/- 60° Grinding spindle speed: 2,420 / 3,290 rpm Workpiece spindle speed: 250 to 710 rpm Grinding spindle headstock speed: 2,079 / 2,818 rpm Spindle bore for internal grinding attachment: Cross travel of grinding spindle headstock: 80 mm Connection: 5 kW Accessories/Equipment: Internal grinding attachment Condition: good Weight: 1.5 t Machine dimensions: 1,900 x 1,100 x 1,500 mm Dimensions hydraulic unit: 600 x 800 x 800 mm Dimensions electrical unit: 800 x 600 x 1,400 mm

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 380 V, We are offering this used Löser RS-340 belt grinding machine, year of manufacture 2014. Manufacturer: Löser Machine type: RS-340 Year of manufacture: 2014 Power supply: 380 V Bcodpoygbbnjfx Aafju Frequency: 50 Hz Serial number: 1542 Current type: Power consumption: Speed n: If you have any questions or require more information, please feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2012, operating hours: 344 h, functionality: fully functional, grinding length: 850 mm, grinding width: 400 mm, total height: 505 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Base machine Type Linea Iron 6.3 Preparation for magnetic chuck with safety function Magnetic chuck 600 x 300 x 70 mm Paper band filter unit with manual paper unwind Air cooling for hydraulic oil Dressing fixture at the end of the table, incl. space for lateral diamond 2x grinding wheel flanges with manual weights Machine grinding range: Bjdpsygap Refx Aafocu Longitudinal 850 mm. Cross 400 mm including max. B (50 mm) grinding wheel. Height distance table to spindle center 505 mm. Weight 3,500 kg.

Condition: like new (used), functionality: fully functional, 1 as-new high-performance knife grinding machine MVM KX 250 – 2100 mm (ex-demonstration unit) * 1-year warranty • Siemens touch screen PLC (control system, spare parts supply guaranteed by MVM) • Grinding wheel motor 15 kW, 20 HP, 400V, 3-phase, 50 Hz • Grinding wheel diameter: 250 mm • Magnetic rotary table, adjustable from 0 to 90 degrees • Magnetic table width: 150 mm • Magnetic table length: 2100 mm • Vernier indexer for magnetic table rotation +/- 90° • Controls for rapid or slow downfeed of the grinding wheel • Automatic feed controlled by Siemens PLC (0.001 – 0.1 mm) Bcsdpfex Nhnhsx Aafeu • Fully automatic work cycle (rough grinding, fine grinding, sparking out) • Variable carriage speed: 1 – 30 m/min • Automatic lubrication of PTFE slideways • Coolant injection at center of the grinding wheel plus 2 further nozzles on each side • External coolant tank with pump • Magnetic separator with discs for coolant cleaning • Motorized quick-change flange for fast tool changeover • Variable grinding wheel speed (adjustable to blade, machining phase [roughing, finishing, sparking out], and blade wear) • Automatic approach to workpiece (HSS) • LED lighting • Dimensions: 4.12 x 1.50 x 1.75 m • 1-year warranty

Condition: excellent (used), Max. external diameter: 75 mm Hydraulic pressure: 102 bar Safety pressure: 120 bar Tank capacity: 76 L CE standards Dimensions: 2200 × 830 × 1350 mm Bodpew U Awaefx Aafocu Weight: 1300 kg

Condition: good (used), functionality: fully functional, Saw blade swivel range: 180° Bsdpfeyf Nmcsx Aafecu

Condition: good (used), functionality: fully functional, Kuhlmann with accessories Bcedjyf Nlrspfx Aafeu

Year of construction: 1994, condition: ready for operation (used), Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible. Bcsdpfjyf I Hbox Aafsu

Condition: used, Year of construction: 2003, Control BWO tip circle diameter max. 700 mm root circle diameter min. 50 mm height of profile max. 35 mm number of spindle speeds 0 - 5400 min-1 table load capacity max. 500 kg Bjdpfjxt Ur Sjx Aafecu Overall size 370x220x300 cm Total weight, approx. 15000 kg Number of working hours 94082 h Equipment: BWO control system All axes CNC controlled Oil mist extraction Coolant cleaning system with cooling unit Dittel balancing unit Accessories: Grinding wheels Ø400mm incl. Grinding wheel flanges 1 diamond dressing roller, manufacturer Dr. Kaiser, Ø160mm Counterholder tip Control cabinet: Width 70 cm x length 280 cm x height 220 cm Machine: Width 220 cm x length 370 cm x height 300 cm Coolant system: Width 170 cm x length 240 cm x height 250 cm

Condition: used, 1 cylindrical grinding machine Manufacturer: Tschudin Model: HTG 400 Year of manufacture: 1967 Bsdpfx Aasyf Dn Uofjcu Centre distance: 400 mm Centre height: 100 mm Taper: MK4 Spindle speed: Max. table travel: 420 mm Table swivel at 15° Grinding wheel: Ø 300 mm Insertable tailstock MK3

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Bcjdpsu Hiq Refx Aafju Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Condition: used, Year of construction: 2013, machine/vehicle number: 15513, Polishing machine Gottschild HBS 1600-750-100-1(2) Bsdpou Afu Djfx Aafjcu The Gottschild grinding and polishing machine offers a wide range of applications, from the production of high gloss furniture fronts, glass panels to Corian • grinding and polishing. • Easy change between grinding and polishing head • with sinusoidal tool head oscillation, for an even better uniform high- gloss surface which satisfies even the highest demands. • with automatic part detection (machine only designed for rectangular parts) Technical data: • Type: HBS 1600-750-100-1 • Year of manufacture 2013 • Electrical connection 400V, 50 Hz, 4,5 kW, 10 A • Compressed air 6 bar connection adjusted to 5 bar • Conveyor belt 1.600 mm x 940 mm • part width: 90mm- 750mm (without tool brigde 850mm) • part length: 150 mm - 2.800mm • part heights 8-100 mm (extended working height) • Frame size 1600 mm x 1200 mm • Rack height approx. 960 mm ± 25 mm • Frame material welded steel tube • Support for superstructure aluminum profiles • Belt cleaning manual every 8 hours • Safety devices emergency stop. • The machine has to be shielded by protective walls if the machine is delivered without housing. • Polishing motor 400V, 50 Hz, 0,75 kW with planetary gearbox • Control Siemens/Vipa S7 PLC, parameters via KEB Touch Panel • Frequency converter KEB • Control elements control ON/OFF, RESET, START/STOP, program interruption, grinding head speed, oscillation speed and belt speed • Tool bridge: Tool bridge with polishing head, consisting of a linear profile system, driven by linear cylinder. • Without polishing disk for the polishing head Location: on stock

Condition: good (used), Year of construction: 1990, Ref. -No.: 10301 Manufacturer: TITAN Type: RU 350 x 1-1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Bedpfx Aaoycpv Sofjcu Grinding Wheel Width: 80-100 mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 004-040.0004, CNC Cylindrical Grinding Machine Manufacturer: STUDER Model: S22 CNC Year of manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Linear Axes / Guides X-axis (cross slide): Maximum travel approx. 310 mm X-axis feed rate up to approx. 15,000 mm/min (depending on configuration) Z-axis (longitudinal slide): Maximum travel approx. 850 mm Z-axis feed rate up to approx. 30,000 mm/min Grinding Spindle / Grinding Wheel Main spindle power, e.g. 12.5 kW in the standard version Standard grinding wheel diameter e.g. Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g. grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Control, standard: e.g. FANUC 31i-A (PC integrated) with StuderWIN operator interface Guideways: Machine bed made from Granitan® S103 (mineral cast) for thermal stability and damping Dimensions / Electrical Data Machine weight approx. 8,500 kg Power supply, typically 400 V / 50 Hz (country-specific) Bcedpfxextpnzo Aafou

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 220, Dear customers, We are currently offering a very good used vertical band sander for model and mould making from the brand F. Zimmermann. Below are the technical details: Sanding belt width: 250 mm Sanding height: 400 mm Bodpfexy Nrgsx Aafecu Belt length: 2,400 mm Sanding speed: 18 m/s Work table: 750 x 350 mm Table tilt: 30/45° Power: 4.0 kW Speed: 1,400 rpm Extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot emergency stop Price plus VAT; this will be itemised separately on the invoice.

Condition: used, Year of construction: 1973, grinding length 600 mm grinding width 250 mm workpiece height 500 mm table surface area 600 x 200 mm dimensions of grinding wheel 220 mm table height over floor 1000 mm grinding spindle speed 1400 / 2800 U/min total power requirement 2,0 kW weight of the machine ca. 1,5 t Bcsdpfx Aajyfwx Tefju dimensions of the machine ca. 1,4 x 1,2 x 1,9 m