Used Spring End Grinder for sale (12,029)

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Cgedpfxjv Igg Ij Ac Non Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: used, Centerless grinders SASL 125 1A, 200x300, 125x250, KCH 63 Cgsdocup D Nspfx Ac Njn

Year of construction: 2002, condition: used, elv Bochum Cjdpfoxr Uvnjx Ac Negn Network 24V= Magnet 12V

Condition: excellent (used), Side mills Zerma Year of manufacture 2005 Type: GSL -18AMIS) Cedpslvt Eqsfx Ac Njgn

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: GG220N-15839, overall weight: 4,950 kg, input current: 92 A, input voltage: 400 V, year of last overhaul: 2025, For sale: double edge machine with 2 x 10 cup wheels and corner deburring function. This is a single machine with a maximum working width of 2500 mm. The machine is still connected and can be tested at any time. Codpfsxzgrtox Ac Njgn

Condition: ready for operation (used), Vermogen slijpsteen: 15 kWt Besturing: Siemens Sinumerik 840 C Siemens drive: 6SN1145-1BA00-OCAO Cgodpfexl Hxhjx Ac Njn Worklength with magnetic table: 1270 mm Grindingwidth: 610 mm Longitudinal travel X-axis (autom.): 1310 mm Cross-travel Y-axis (autom.): 565 mm Travel Z-axis (autom.): 470 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 400 x 100 x 127 mm Spindlespeeds: rpm Motorpower: 30 / 47 kWt Tension needed: 380V - 50Hz Cooling system: yes

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Cedpoyan R Nofx Ac Njgn Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: used, CFS Grinder -Type: AUTOGRIND - 200 -Power: 74 kW -Throat diameter: 200 mm -With loading -Number of main screw gears: 2 Csdpfx Ajyanifjc Njgn -External dimensions: 3250 x 1600 x 3250 mm -Made of stainless steel -Power supply: 400V 50Hz 3Ph -Condition: used in very good condition, overhauled, ready to work

Condition: used, STUDER S 40-2 is a Cylindrical grinder designed for precision, high accuracy and reliability. Working capacities: centre height 175 mm, distance between centres 650 mm, max longitudinal travel 700 mm; wheels Ø400 mm (width 80/40 mm) bore 127 mm; workpiece max 130 kg; hydraulic cross travel 300 mm; wheelhead swivel 180°; table angle 12°. Main specs: wheel speeds 6 steps 1500–2400 t/min (35 m/s); work spindle stepless 60–600 t/min, rotatable 0–90°; wheel motor 3 kW, work spindle motor 1 kW; 3×400 V 50 Hz; total 13 kVA; weight ≈3100 kg; dims 2150×2000×1800 mm. Accessories: 2‑axis DRO, internal grinding attachment, magnetic chuck Ø150 mm, paper filtration, flanges, lamp, balancing arbor, safety device. Achieves tight tolerances; suited to automotive, aerospace, tooling and medical sectors Cgsdjx S N D Aspfx Ac Nsn

Condition: excellent (used), CATALOG NUMBER 7324 Cgodex S I Nqopfx Ac Njn Technical specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: metal roller + pad + metal roller - Bottom: metal roller + pad + metal roller Top side: - 2 rubber, traction pressure rollers - sanding unit - slip roller - 2 rubber, traction pressure rollers Bottom side: - sanding unit - side guide bar - electrically adjustable sanding height 0.37 kW - 6 feed speeds + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.6 kW - main motors: 2 x 4 kW - extraction port diameter: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – not painted – used sanding machine, in very good condition Net price: 12,500 PLN Net price: 2,970 EUR (exchange rate 4.2 EUR) (Prices may change in case of significant fluctuations)

Condition: excellent (used), mileage: 505,329 km, power: 335 kW (455.47 HP), first registration: 01/2011, fuel type: diesel, tire size: 385/65-R22.5, axle configuration: 4x4, wheelbase: 5,700 mm, fuel: diesel, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, total length: 8,570 mm, total width: 2,500 mm, Year of construction: 2011, operating hours: 4,326 h, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, crane, differential lock, electric window regulation, electronic stability program (ESP), power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Leaf suspension - Brake booster - High beam - Windscreen - Speed limiter - Cab - Particulate filter - Radio/CD player - Sun visor - Pre-heating system - Immobilizer - Power take-off (PTO) - Towing hitch Cgsdpfx Ajxy N Disc Non = Remarks = 2011 MERCEDES-BENZ ACTROS 2046 4x4 with 505,329 km, HIAB 288 EP 5 HIPRO crane + remote control, hydraulic outriggers with 4 support legs, loading platform, water tank, full leaf spring suspension + drum brakes, automatic transmission, PTO, drawbar, air conditioning, various differentials locks, front axle tyres: 385/65-R22.5 (L: 3 mm; R: 4 mm), rear axle tyres: 315/80R22.5 (L: 15/16 mm; R: 16/11 mm), Belgian registration = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,518 cc Axle Configuration Axle brand: DRUM Brakes: Drum brakes Suspension: Leaf spring Front axle: Tyre size: 385/65-R22.5; Differential lock; Max. axle load: 9,000 kg; Steering; Left tyre tread: 20%; Right tyre tread: 25% Rear axle: Tyre size: 315/80-R22.5; Twin tyres; Differential lock; Max. axle load: 12,000 kg; Left inner tyre tread: 100%; Left outer: 95%; Right inner: 70%; Right outer: 100% Weights Curb weight: 15,540 kg Payload: 3,460 kg Gross vehicle weight: 19,000 kg Functional Mast: Slider Mast length: 15 m Crane: HIAB 166 D-4 HIDUO + ROTATOR, year of manufacture 2008, mounted behind the cab Body manufacturer: HIAB 288EP-5 HIPRO Pump: Yes CE mark: Yes Condition Technical condition: very good Visual condition: very good For more information Please contact Arne Honingh for further details.

Condition: used, The RGM 3, a top-tier Tube End Finishing Machine from KNUTH, is designed for precision and efficiency in tube processing. Its rigid construction and small footprint make it an ideal choice for any workshop looking to optimize space without sacrificing performance. The machine features a jaw chuck at the front and a clamping chuck at the rear, allowing for versatile operations. Additionally, it comes equipped with a tube cutter and an inside deburrer, ensuring clean and accurate finishes on all types of tubing. With the inclusion of a mobile base, the RGM 3 offers easy maneuverability, enhancing its usability. Whether you need to perform intricate tube work or handle larger projects, this highly robust machine is built for the task. Don't miss out on the opportunity to enhance your tube and profile processing capabilities; order online today to bring the RGM 3 to your workshop. Cgjdpfjuxc Rhox Ac Njn

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller Csdpfjx Swu Aox Ac Nsgn - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 600 mm, feed length Y-axis: 220 mm, feed length Z-axis: 540 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 3,000 m/min, table length: 400 mm, table load: 250 kg, table width: 250 mm, Surface grinder Ziersch - ZT 24 MACH-ID 9344 Csdpfxjx Sw H Eo Ac Nogn Make: Ziersch Type: ZT 24 Control: Mitsubishi TOUCH Panel Year: 2010 Sturdy, cast iron execution of all machine components High machine weight for maximum rigidity Preloaded precision linear guideways in the vertical- and cross axis (Bosch Rexroth) for highest accuracy Scraped and turcite coated slideways in the longitudinal axis provide excellent vibration absorption and a high-quality grinding surface pattern. Hydraulic longitudinal motion with return cooling unit to achieve good surfaces Electro-mechanic cross- and vertical motion Measuring systems in vertical axis (Heidenhain) for precise positioning Maintenance-free paper band filtration unit with up to 500 l tank and 2-bar pressure pump for effective cooling and rinsing Integrated rinsing channel Magnetic separator for prefiltration of the paper band filtration unit Infinitely variable grinding spindle motor Machine lamp Table-mounted dressing device for high precision and surface finish Electro-permanent magnetic chuck (SAV) with integrated pole changing unit and traction regulation Partial encapsulation of the machine with sliding door and a service door Effective splash guard and an excellent accessibility Preparation of the machine for installation of a coolant mist exhaust unit Control system features: Very comfortable and easy to operate Z-control Automatic vertical infeed with dressing amount compensation Fully automatic grinding cycle with dressing cycles Easy operation via touchscreen Large and clear colour screen (10.4") Electronic handwheel, usable in vertical- and cross axis X - Travel: 600mm Y - Travel: 220mm Z - Travel: 540mm Table Length: 400mm Table Width: 250mm Table load: 250 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Grinding stone dimensions:250 x 38 x 50,8mm Power: 3,7kW Speeds: 4500Rpm Cooling system: Yes Feed rate Y-Axis: 30000mm/min. Length: 3050mm Width: 2050mm Height: 2510mm Weight: 2900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 5,500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 750 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, table length: 5,500 mm, table width: 750 mm, Profile grinder MAEGERLE - MGC-L 560 Surface, Profile grinding machine 5600 mm CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Pendel opperation ( double table) Dresser automatic Table dresser X - Travel: 5500mm Y - Travel: 650mm Z - Travel: 750mm Table Length: 5500mm Table Width: 750mm Feed rate X-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Cedpox Swqwefx Ac Negn Grinding stone dimensions:600 x 300mm Power: 115kW Speeds: 8000Rpm Cooling system: Yes Feed rate Y-Axis: 20000mm/min. Length: 10700mm Width: 4700mm Height: 3800mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: AXA Type: HFB 600 Control system: Siemens 840D Solutione Line Year of construction: 2015 Specifications: Metric Cgsdpfst Tdp Tox Ac Njn Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: new, Year of construction: 2026, Tabletop version -High performance -Belt grinding attachment height adjustable from 0-90° -Maximum usable surface grinding surface -Belt adjustment with fine adjustment Combined belt grinder/sander -Longitudinal stop for material guidance -Perfectly balanced and low-vibration -Double-sided connection for dust extraction Ø 50 mm -Motor protection switch with undervoltage release -Fixed stop -1 standard sanding belt (brown), grit 80 -1 sanding disc 250 x 40 x 51 mm, grit 80 -Spark arrester -Connection cable with CEE plug Additional charge for special equipment/options: Csdpfx Aehhiaasc Negn - Machine stand, emergency stop push button, brake, and extraction system / €2,260 (Item 330.370) - Machine stand, emergency stop push button and brake / €1,030 (Item 330.365) - Machine stand with water immersion tank / €360 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Open-end wrenches, ring wrenches as remaining stock Cgodpfjx Swarox Ac Njn -Open-end/ring wrenches: various sizes, with transport case -Weight of tool: approx. 400 kg Manufacturer: various brand manufacturers, see photos -Submission/Price: complete -Transport box: 1200/810/H350 mm Total weight: 466 kg

Condition: new, Year of construction: 2026, Description Cgodsr Eqzfepfx Ac Nsn Double-sided grinding machine TS 200 SD P with extraction system, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Extraction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimensions without packaging (mm): 250 x 470 - Speed (rpm): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, TS 300 SD P Bench Grinder with dust extraction, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm - Speed (rpm): 1,250 Cjdpfxjr Ez Uwj Ac Njgn - Three-phase motor 400 V / 2.2 kW: Operating mode S2-30 min (Short-term operation) - Extractor motor 0.55 kW, suction capacity 350 m³/h - Weight (kg): 90 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 2000, functionality: fully functional, OKAMOTO ACC 95DX Precision Surface Grinder – 400V For sale is an OKAMOTO ACC 95DX surface grinder. This is a robust industrial machine designed for precision surface grinding, making it ideal for toolmaking and manufacturing applications. The machine comes with a separate control console. Inspection and test run available by appointment. Machine Data: • Manufacturer: OKAMOTO Machine Tool Works, Ltd. • Model: ACC 95DX (Nameplate: ACC95DXM) • Serial number: 690277 • Voltage: 400 V • Phases: 3 • Frequency: 50 Hz • Total connected load: 8.6 kVA • Control/Auxiliary voltage: AC 100 V, DC 22/24 V (as per nameplate) Equipment / Notes: • Side-mounted control console (see photo) Cgodswtm Dijpfx Ac Njn • Grinding head/safety enclosures included • Availability: immediate / by arrangement • Sale ex stock, subject to prior sale

Condition: new, Special offer price incl. shipping within DE (without islands) While stocks last Technical data: Drill diameter: 3 - 13 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,18 kW weight, approx.: 8,1 kg Dimensions, approx.: 320 x 180 x 190 cm Cgodpfxsd R A Dcs Ac Nsn Features: - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Device for relief grinding of drill cutting edges to reduce friction between drill and workpiece - Rotor with precision ball bearing Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - Collet holder ER 20

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Cjdpfevnrm Hox Ac Negn Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides - Workpiece support Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Year of construction: 1998, condition: good (used), Manufacturer unknown Year of manufacture ?? TRAV H/ 2830 The Aro Corporation Mod.78051BSN Cjdpfxof Axils Ac Negn Technical data: Compressed air driven for internal milling 50-225mm Accessories as shown

Condition: new, The EM 250, a robust Tube End Finishing Machine from KNUTH, is designed to provide precise deburring of tubes, profiles, and flat materials, making it an essential addition to any cold circular saw, shear, or profile processing setup. This powerful machine allows for effective deburring both inside and outside the workpieces utilizing a sturdy wire brush, ensuring that chips and burrs are thoroughly removed while maintaining the integrity of the cutting edge. With a motor rating of 2.2 kW and a speed of 3,000 1/min, the EM 250 is ready to enhance productivity in any workshop engaged in tube processing. It features a rigid machine foot and is equipped with a vacuum exhaust connection for cleaner operation. Moreover, it comes with a 5-year warranty for the drive motor, underscoring its reliability. For a well-rounded solution in Tube End Finishing Machines, consider the EM 250. Request a quote today to learn more about this powerful tool in Tube and Profile Processing. Csdeu E H Tgspfx Ac Njgn