Used Spq 300 for sale (12,256)

Condition: used, Year of construction: 1987, pressure 300 t distance between columns 2500 mm stroke 350 mm distance table/ram, max. stroke up, adjustment up 1280 mm table surface area 2500 x 1500 mm table height over floor 850 mm side window 900 mm ram surface 2500 x 1500 mm speed down 300 mm/s speed up 240 - 450 mm/s working speed 23 - 44 mm/s oil volume 3000 l power requirement 132,0 kW weight 54,0 t Dimensions (WxDxH) 3,25 x 3,2 x 4,8 m Gbodpfx Ajvuk Ivon Rjl SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 2003, pressure 300 t distance between columns 1640 mm stroke 900 mm Distance table/ram, stroke up 1200 mm table surface area 1600 x 1300 mm table height over floor 890 mm ram surface 1600 x 1300 mm Speed down 400 mm/s Speed up 300 mm/s Working speed 10 mm/s Oil volume 1150 l power requirement 42,5 kW weight 25 t dimensions (WxDxH) 2,8 x 2,5 x 5,0 m year of manufacture 1994 Gjdpfx Asvut H Uon Robl overhaul 2003 with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, ram interlocking, two-hand operation No foundation pit necessary

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm Gsdpfx Ansvut Hno Rsbl stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm coil external diameter 1320 mm Gedpfxsvut Dts An Robl no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable

Condition: excellent (used), Year of construction: 2015, operating hours: 334 h, functionality: fully functional, machine/vehicle number: 6700-103296, overall weight: 1,525 kg, load capacity: 300 kg, arm reach: 2,700 mm, This is an ABB IRB 6700-300/2.70 industrial robot with IRC5 controller and RW6 PC, year of manufacture 2015. We are pleased to also offer you this robot in a fully refurbished condition! The robot includes the following options: - UDPUC Driver - RobotWare Base (English) - 709-1 DeviceNet Master/slave - 888-2 PROFINET Controller/Device - 963-1 PROFIenergy - 997-1 PROFIsafe F-Device - 687-1 Advanced Robot Motion - 603-1 Absolute Accuracy - 988-1 RW Add-In Prepared - 606-1 Conveyor Tracking - 608-1 World Zones - 610-1 Independent Axis - 611-1 Path Recovery - 612-1 Path Offset Gedpoy Rugmsfx An Rebl - 885-1 SoftMove - 11180-1 Tool Control - 613-1 Collision Detection - 614-1 FTP SFTP and NFS client - 616-1 PC Interface - 688-1 RobotStudio App Connect - 623-1 Multitasking - 624-1 Continuous Application Platform - 628-1 Sensor Interface - 689-1 Externally Guided Motion (EGM) - 996-1 Safety Module - 735-7 Keyless Mode Switch, 3 modes - 1341-1/1520-1 Integrated Vision Interface - 630-1 Servo Tool Change

Condition: excellent (used), CATALOGUE NO. 7916 TECHNICAL DETAILS - Working width: 510 mm - Number of knives: 4 pcs - Max thickness of workpiece: 300 mm – From above: - Kickback pawls - Gear-driven, pull-in, oscillating feed roller - Pressure bar - Planing cutterblock - Pressure bar - Smooth, driven outfeed roller Gedpfx Aoy Rtcmsn Rsbl – From below: - Adjustable feed roller in the lower table, 1 pc - Motor power: 6.8 kW - Electric table lift - 4 feed speeds: 5 / 10 / 15 / 20 m/min - Extraction port diameter: 170 mm - Dimensions (L/W/H): 1120 x 1000 x 1100 mm – weight: 650 kg ADVANTAGES – Manufactured by the Italian brand CASADEI – Max planing height: 300 mm – electric table lift – One powered roller installed in the table supports machine feed – Thickness planer used, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR (at a rate of 4.2 PLN/EUR) (Prices may vary depending on further currency fluctuations)

Condition: used, Closing machine RENZ ECL 360 with automatic feeder WP 300 for wire comb binding elements Gbsdpfx Ajy Rrykon Rjl

Condition: good (used), Year of construction: 2017, operating hours: 5,313 h, functionality: fully functional, machine/vehicle number: 6700-113201, overall weight: 1,525 kg, load capacity: 300 kg, arm reach: 2,700 mm, This is an ABB IRB 6700-300/2.70 industrial robot with IRC5 controller and RW6 PC, year of manufacture 2017. We are also pleased to offer this robot fully refurbished upon request! Gedpfx Ajy Rpk Ten Rjbl The robot includes the following options: - UDPUC Driver - RobotWare Base (English) - 709-1 DeviceNet Master/Slave - 888-2 PROFINET Controller/Device - 963-1 PROFIenergy - 997-1 PROFIsafe F-Device - 687-1 Advanced Robot Motion - 603-1 Absolute Accuracy - 988-1 RW Add-In Prepared - 606-1 Conveyor Tracking - 608-1 World Zones - 610-1 Independent Axis - 611-1 Path Recovery - 612-1 Path Offset - 885-1 SoftMove - 11180-1 Tool Control - 613-1 Collision Detection - 614-1 FTP, SFTP, and NFS client - 616-1 PC Interface - 688-1 RobotStudio App Connect - 623-1 Multitasking - 624-1 Continuous Application Platform - 628-1 Sensor Interface - 689-1 Externally Guided Motion (EGM) - 996-1 Safety Module - 735-7 Keyless Mode Switch, 3 modes - 1341-1/1520-1 Integrated Vision Interface - 630-1 Servo Tool Change

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 06/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Gbedpfx Ansy Rkpkj Rel Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 02/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - KRONE axles with air suspension and disc brakes (Offser 120) Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Gbjdpfxjy Rkycs An Rjl Plastic toolbox with cover holder Fuel tank, 240 l Electronic brake system EBS Anti-lock braking system ABS Thermometer Ventilation flap, small, at rear, right side, half way up Contact switch for rear door Low noise aluminium floor, suitable for PIEK floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Length/width/heigth - 1341cm/249cm/265cm Max weight - 36 000 kg Own weight - 8 847 kg 3 axles Pallet rack for 36 Euro pallets

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 05/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Gbjdoy Rkxfepfx An Rjl Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: Godpfeilg Hdjx An Robl - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: new, Cup grinding machine Make: DELTA Model: LB 300 Condition: New machine Gjdpfxefhv Edo An Rebl equipped as standard with: - Grinding wheel flange - grinding wheel - Wet grinding device - Operating instructions

Condition: used, Year of construction: 2001, turning diameter 80 mm Gbjdpfx Aneymgcds Rjl turning length 800 mm control OSP-U100L total power requirement 22 kW weight of the machine ca. 6,3 t

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Saw blade speed 31.5 rpm Gjdpfx Anjy Ra D Do Rsbl Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 07/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Gbodpfx Asy N Apmen Rol Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 665 mm -Material: Cast iron -Bores: Ø 28 mm, groove 228 x 28 mm -Dimensions: see photo -Quantity: 2x mounting cubes available -Price: per piece -Dimensions: 300/200/H100 mm -Weight: 15 kg/pc. Gbodpfxjxrk Iyo An Rol

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, Gedpfx Anewlhvwj Rebl kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Year of construction: 2008, condition: ready for operation (used), number of axes: 3, This 3-axis TESA Visio 300 was manufactured in 2008. It features an X-axis travel of 300 mm, Y-axis travel of 200 mm, and Z-axis travel of 150 mm. The machine includes a precision vice and a glass stage plate, enhancing its measurement capabilities. If you are looking to get high-quality optical measurement capabilities, consider the TESA Visio 300 machine we have for sale. Contact us for further details. • Voltage: 110 / 240 V • Frequency: 50 / 60 Hz • Software: TESAVista 1.4 (Application Software) • Manuals: Includes "Manuel & DCC Version" binder Gedpfx Ansy N Am Es Rsbl • Travel: X 300 mm, Y 200 mm, Z 150 mm Additional equipment • Maxell 2HD Floppy Disk (System/Data) • RÖHM "Praezisions-Spanner" PL-60G (Precision Vice) • Demo piece • Glass stage plate

Condition: excellent (used), operating hours: 20 h, CATALOG NUMBER 7874 – Manufactured in Poland - Excellent condition – only 20 operating hours – Original documentation DTR + CE – Additional knives included – Additional bushings included: 18mm, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29mm - Knife setting tool included - Used machine, original paint (not repainted) Technical specifications: - Diameter of produced dowels: 180–300mm - Max. diameter of raw wood before processing: 380mm - Max. allowance for machining: 40mm per side - Min. input material length: 1100mm - Knife head drive motor: 55kW - Stepless feed speed adjustment + forward/reverse: 1.5–8 m/min - Feed motor: 7.5kW Configuration: - 8 toothed infeed driven rollers - 4-knife cutter head - 6 smooth outfeed driven rollers - 7 pneumatic hold-downs - Additional bushings included - Additional knives included - Operating pressure: 6 bar Gbsdpfx Aoy Nztksn Rel - Electric cabinet dimensions (LxWxH): 900x400x1600mm - Machine dimensions (LxWxH): 4100x1650x2300mm - Weight: ~4000kg Net price: 199,900 PLN Net price: 47,600 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Gbedjy Nz Diopfx An Rol Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2008, Used CNC machining center Manufacturer: IMA Model: BIMA 300 125/430 Gedpfxjy Nzw Ns An Rsbl Year of manufacture: 2008 4-axis CNC machining center with console table 8 supports in X, manually adjustable, 3 vacuum cups per console, vacuum pump 90 m³/h vacuum connection for templates LED display for vacuum cup position indication Working area X: 200 – 4300 mm Working area Y: 0 – 1400 mm (milling/drilling), Working area Z: 12 – 125 mm (clearance 150 mm) Additional central stop row 14 vertical drilling spindles + 6 horizontal horizontal drilling and grooving saw unit, swiveling 90° Milling spindle 7.5 kW up to 18,000 rpm with C-axis 360° interpolation, liquid circulation cooling – 18-position tool changer mounted on the Y-support Edge banding unit VT 100, four-sided/all-around – rotation range 740 degrees with 2-position roller magazine, automatic granule feed Adapter units: – fixed saw 90° – 4-spindle angle head Control ICOS open 231 with 17″ TFT UPS ImaWop 10.0 incl. MDE and production list software Safety fence on right side and foot mats at front; Rear: requires wall installation or separate safeguarding

Condition: used, machine/vehicle number: 008324, Max. panel width: 1000 mm Gbjdpfjx Hpkrsx An Rol Max. panel length: 2500 mm Length of conveyor: 7000 mm Panel return for edgebander: Right

Year of construction: 2006, condition: excellent (used), Dispensing hot food products is normally associated with a number of health and safety risks. These risks are minimized with a fully automated dispensing system. The controls make sure that the operator avoids any direct contact with the 90°C hot product. The automatic bag-packing unit seals the bags once they are filled. Furthermore the need for lifting products over long distances is reduced since the ready packaged dishes are transported from the filling station to the operator via a small conveyer belt. This prevents inappropriate working positions. Gedpfoh A Hbxox An Rsbl HOT-FILL DOS 3 ensures uniform portions. The quantity is controlled via the touch- screen display. The display also controls how quickly the product is to be dispensed allowing for flexibility in the workflow. The fully automated HOT-FILL DOS 3 sucks the product directly from the kettle and is fitted with a temperature alarm consistently ensuring the correct temperature of the product.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 01/2018, total length: 13,410 mm, total width: 2,490 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF Full air suspension Insulated double rear doors with 4 steel lockrods Gsdpfx Anjy Nwxis Rebl FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 240 l Electronic brake system EBS Anti-lock braking system ABS SAF (disc brakes) Thermometer Ventilation flap, small, at rear, right side, half way up Contact switch for rear door Low noise aluminium floor, suitable for PIEK floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/249cm/265cm Max weight - 36 000 kg Own weight - 8 847 kg 3 axles Pallet rack for 24 Euro pallets