Gantry milling machine

Mecof Dynamill 300/ACM

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning length: 650 mm, turning diameter: 400 mm, Fanuc Oi-TD control 3-jaw chuck diameter 250mm 12-fold revolver tail stock chip conveyor The machine has only 4051 switch-on hours Technische Daten: / technical details Schwingdurchmesser / rotary diameter 650 mm Drehdurchmesser / turning diameter 400 mm Drehlänge / turning length 650 mm X-Weg / X-travel 230 mm Z-Weg / Z-travel 650 mm max. Drehzahl / max. spindle speed 4500 UpM /rpm Bwjdpfx Amsvi Haqerju Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 11/15 kW Gewicht ca. / weight ca. 5400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Bjdpezbqqusfx Amrjwu Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Bwodpfsu Eb Niox Amrsu Bear weight 630kp Top pressure - filling pressure 5 bar

Condition: good (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMU 80 evo Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 650 mm Z-axis: 550 mm Rotary range C-axis: 360° Swivel range B-axis: -5° to +110° Main spindle: Tool interface: HSK-63A Speed range - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Rotary table: Table dimensions: 800 x 700 mm Max. table load: 600 kg Tool changer: Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 50 m/min Operating hours: approx. 36,600 h Spindle hours: approx. 20,350 h Technical features & accessories: - Active cooler - Direct path measuring system in all axes - Full enclosure - Articulated belt chip conveyor - Coolant nozzle Bjdpfxjz Eby Re Amrewu - MPC – Machine Protection Control - NC swivel rotary table incl. table cooling - Internal coolant supply 40 / 80 bar, consisting of: - 980 l tank - Purge air for linear measuring systems - Bed flushing - Extended chip flushing - Coolant temperature control - Oil and emulsion mist separator, mechanical - Blow-off air through the spindle center - Infrared measuring probe, manufacturer Heidenhain TS 649 - Laser tool measurement, manufacturer BLUM NT - Preparation for 3D quickSET - Preparation for handling system PH 150-8 - Operating mode 4 - Free M-functions - Automation, manufacturer Zero Clamp Zerobot 100P Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, Year of construction: 2009, faceplate diameter 3000 mm swing diameter 3500 mm turning height 3200 mm Control Fanuc type Series 320i Model A slide adjustment 1750 mm ram head dimension 300x300 mm x-axis 2700 mm Table load 30000 kg main drive motor 100 kW Tool changer 16 weight of the machine ca. 89 t dimensions of the machine ca. 8,5x6x8 m No. 1104 Bjdpfx Ameyqu Rworjwu The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2018, operating hours: 6,185 h, functionality: fully functional, Tsugami B0326E-II Long-Turn Lathe Manufacturer: Tsugami Model: B0326E-II Year of manufacture: 2018 Control: Fanuc 32i-B Technical data Max. bar diameter: 32 mm Max. machining length: 320 mm (with guide bush) Machining without guide bush: 70 mm Main spindle: 8,000 rpm Bwedpfszlp Swox Amrou Counter spindle: 8,000 rpm Tool spindles: 6,000 rpm Number of controlled axes: 6 Tool stations: 31 standard (optional up to over 40, depending on configuration) Driven tools Y-axis C-axis, main and counter spindle Rapid traverse up to 32 m/min Main spindle motor: 3.7 / 5.5 kW Counter spindle motor: 2.2 / 3.7 kW Connection power: 21.4 kVA Machine weight: approx. 3,500 kg Dimensions (L × W × H): 2,150 × 1,280 × 1,930 mm Equipment ✔ Fanuc 32i-B CNC control ✔ Counter spindle ✔ Y-axis ✔ C-axes ✔ Tool package ✔ Top Infinity bar feeder magazine ✔ Kraft & Bauer fire extinguishing system ✔ Coolant system ✔ Chip conveyor Very well-equipped Tsugami B0326E-II long-turn lathe from 2018 with Fanuc 32i-B control. The machine features a main and counter spindle, Y-axis, and driven tools, making it ideal for high-precision series production of complex turned parts up to Ø 32 mm. The scope of supply includes an extensive tool package, a chip conveyor, a Top Infinity bar feeder magazine, and a Kraft & Bauer fire extinguishing system. The machine is in good condition and is available for immediate delivery after consultation.

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Control system: Heidenhain iTNC 530 incl. handwheel HR420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ± 360° Maximum workpiece size 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) Can be machined in 5 axes (90° free A-axis) in a single setup using a 300 mm long tool. Machine operating hours: approx. 83,000 h Total spindle hours: approx. 37,000 h Machine bed (can be installed flush or above ground!) Dimensions: 5,000 x 2,250 x 300 mm - manufactured from EN-GJL-250 9 T-slots according to DIN 650-28H12 with a spacing of 250 mm and 125 mm from the edge 2-axis milling head, inspected by the manufacturer! Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Bjdpfx Amjzkuirerjwu Holding torque (clamped) A & C axis: 2,000 Nm Drive system for linear axes Feed rate X, Y, and Z axes: up to 65 m/min Axis acceleration X, Y, and Z axes: up to 5 m/s2 Connection data Voltage: 400 V Frequency: 50 Hz Power consumption: 130 kW Dimensions, weights Machine footprint without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Color Enclosure, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL color 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area cover Condition of the machine The milling head has been freshly inspected by the machine manufacturer, thus partially overhauled and fully functional. Completely new machine bed from Stolle! The additional modules shown on the machine bed are not included in the scope of delivery. The extraction systems and ducts shown are also not included in the scope of delivery. The previous owner was an established Formula 1 team from Central Europe. The machine was always under a maintenance contract with the manufacturer. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by arrangement.

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Bwjdpfx Amsy Dqb Tjrou Equipment: - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Machine weight: 6,700 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,500 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (min.): 3,000 rpm, A CNC portal milling machine FKD-Feichter with double column is available. Travel range X/Y/Z/W: 6000mm/4800mm/1500mm/1300mm, table dimensions X/Y/Z: 6000mm/3000mm, max. workpiece weight: 115,000kg, max. table load: 6,400kg/m², total machine bed length: 14,500mm, portal dimensions X/Y: 3,000mm/4,400mm, C-axis: 360°, A-axis: +/-120°, ram section: 700mm/700mm, feed rate: 10m/min. Total system dimensions X/Y/Z: approx. 15,100mm/6,100mm/7,000mm, total system weight: approx. 115,000kg, control system: Heidenhain. Includes chip guard, coolant system, and hydraulic unit. The machine was built at the site in 2022. The ram and spindle have been freshly overhauled. Documentation is available. On-site inspection is possible. Immediately available. Bwsdpfx Aoxp Rgksmrju Three heads: Fork milling head with A-axis, 90-degree angular head, spindle extension – straight head, tool holder SK 50.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Bjdsrntiropfx Amrewu Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9