Used Splitter for sale (147)

Condition: like new (used), functionality: fully functional, UNUSED POWERKING HYDRAULIC ROCK SPLITTER Dcjdpfx Asv Ux R Eeb Tjr MODEL : HRS140

Condition: new, - Motor power 15kW - Control SPS supported, with two-hand safety circuit - cutting force 50to - idle speed ca.22,3 mm/sec - Splitting table straight design - cutting channel: - max. length ca.3000mm - max. opening ca.1250mm Dcsdpfjfbx Nbex Ab Tor - machine weight ca.4,8to goods to order price and further information on request

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Dcedpfxjv Dvhyo Ab Tsr Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2025, Device description The splitter has an overload valve that drains oil to the tank and an efficient, failure-free gear pump. The tree lifting system makes it easier to place heavy materials directly under the splitting wedge 5-pin power connection The wedge set at an angle makes it easier for the wedge to sink into the material. FAILURE-FREE HYDRAULIC PUMP 24l! Technical parameters Pressure force 22 TON Minimum wood diameter 80 mm Maximum wood diameter 700 mm Minimum wood length 350 mm Maximum wood length 1100 mm Splitting speed (continuously adjustable) 10.5 cm/s Return speed 7.5 cm/s Wedge stroke length 948 mm Total engine power (S1;S6) S1:5.1 kW S6: 6.6 kW Dedewnxcmopfx Ab Tecr Voltage 400 V Hydraulic tank capacity 24 l Hydraulic system pressure 27.7 Mpa Dimensions 1050 x 1550 x 2500 mm Weight approx. 320 kg

Condition: used, Splitter wedge for frame saw Rollers electrically driven Available mid-October Location: Austria, near Leoben Dcedpfx Aboxd Ub Ue Tor

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, overall weight: 5,000 kg, cutting force: 40 t, input voltage: 400 V, number of blades: 1, power: 18.5 kW (25.15 HP), roll length: 2,600 mm, roll diameter: 1,500 mm, noise level: 85 dB, Roll Slitting Machine BOA HRSM 40T 1500 x 2600. This machine is perfectly suited for cutting large rolls of paper/cardboard or even plastic into pieces. The machine is sold in a refurbished condition. It is currently being overhauled and will be provided with a new coat of paint. The machine is supplied with an infeed conveyor and outfeed table. The transport belt is 3,000 mm long and 2,000 mm wide. Technical specifications roll slitter: Maximum roll diameter: 1,500 mm Maximum roll width: 2,600 mm Cutting force: 40 tons Drive: 18.5 kW Cutting speed: approx. 4.5 cm/sec Dcodpfx Abjxbddao Tjr The machine can be inspected at our facility in Almelo.

Year of construction: 2025, condition: used, New: Yes Price: On request Dsdpfexayqaex Ab Tocr Maximum diameter:

Condition: new, Year of construction: 2025, Engine power 7,5kW - Cutting force 30to Cutting channel designed for - max. roll length 1500mm - max. roll diameter 850mm - machine weight approx. 3500kg - tank capacity approx.110liter - hand guard in the area of the control panel and opposite to it -knife lock -splitter table straight execution -documentation 2-fold German ( 1x text form, 1x CD ) Djdpfx Aegl Adzsb Tocr -color RAL 5012 - light blue protective grid/knife bar RAL 1028 melon yellow machine in stock and immediately available Price and further info on request

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Djdpfxov Dvfrs Ab Tecr Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Year of construction: 2004, condition: good (used), Line for cutting and splitting firewood PINOSA Brand - PINOSA Italy Model - EPC 3300 Construction year - 2004. The condition is excellent, the machine is in operation and it is possible to test it. Djdpfx Aelwpgbsb Tocr Cutting with a circular saw from Vidia material. Fully automated with the possibility of cutting only, as well as cutting and splitting. Max cutting diameter 40cm. Max log length 4m. Pressure force 35 tons. Electric motor power - 2x22 kW.

Condition: new, Year of construction: 2025, PROFESSIONAL 8 TONS OF WOOD SPLITTER. The solid structure and high-quality wedge guarantee long life and trouble-free operation. The machine is designed for splitting wood up to with a diameter of approx. 450 mm! Its stable, solid construction ensures excellent results. The log splitter is equipped with a hydraulic cylinder with automatic return piston. Device description Device equipped with side tables to facilitate feeding of material for splitting. Fail-safe and powerful motor for 230V power supply. The log splitter ensures safe operation in accordance with EU standards, among others thanks to the double handle. The angled wedge helps the wedge sink into the material. Adjustable bayonet allows you to set the return of the wedge to any height. LIFETIME WARRANTY ON THE HYDRAULIC PUMP! Technical parameters Dcsdpfsridpaex Ab Tsr Engine 3 kW (4.1 HP) / 230 V Pressure 8 T Wood length range 250 - 520 mm Wood diameter range 80 - 450 mm Feed rate of the wedge 0.025 - 0.04 m / s Wedge return speed 0,15 m / s Maximum hydraulic pressure 265 BAR Capacity of the hydraulic tank 3.3l External dimensions 1070 x 800 x 1500 mm Weight 98 kg

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom Dcjdoupiapepfx Ab Tsr - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Year of construction: 2025, condition: used, New: Yes Empty weight: 131 kg Djdpfx Abexaypvj Tjcr Dimensions (LxBxH): 187 x 87 x 40 cm Price: On request Maximum diameter:

Condition: new, Year of construction: 2025, - Motor power: 7.5 kW - Cutting force: 25 tons Cutting channel designed for: - max. roll length: 1,500 mm - max. roll diameter: 800 mm - Machine weight: approx. 3,000 kg - Tank capacity: approx. 110 liters - Hand protection grille at the operator control panel and opposite side - Splitting table, straight design - Documentation: 2 copies in German (1x text format, 1x CD) Dsdpfstvmw Dex Ab Tjcr - Color: RAL 5012 – light blue Protection grille/knife beam: RAL 1028 melon yellow Machine in stock – immediately available Price and further information on request

Condition: new, Year of construction: 2025, Yanigav Log Splitter FB90 Dodpor D Nhmjfx Ab Tocr • Weight: 1080 kg • Force: 32 t • Drive: Hydraulic pump • Log length: up to 115 cm • Log diameter: 30-80 cm • Wedge length: 45 cm

Condition: good (used), Line for cutting and splitting firewood PINOSA Brand - PINOSA Italy Model - EPC 3300 Construction year - 2004. Dsdouzxkvopfx Ab Tecr The condition is excellent, the machine is in operation and it is possible to test it. Cutting with a circular saw from Vidia material. Fully automated with the possibility of cutting only, as well as cutting and splitting. Max cutting diameter 40cm. Max log length 4m. Pressure force 35 tons. Electric motor power - 2x22 kW.

Condition: new, functionality: fully functional, Year of construction: 2024, color: red, overall weight: 100 kg, total height: 1,000 mm, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. Dedpfx Abjuph Uxs Tscr It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, - Motor power 7.5 kW - Cutting force 25 tons Cutting channel designed for: - Max. roll length 1500 mm Djdpfx Abod Tfzdo Tocr - Max. roll diameter 800 mm - Machine weight approx. 3000 kg - Tank capacity approx. 110 liters - Hand guard grille in the control panel area and opposite - Straight version of splitting table - Documentation in German (2x: 1x in text form, 1x on CD) - Colour scheme RAL 5012 – light blue Protective grille/knife beam RAL 1028 melon yellow Machine in stock – immediately available Price and further information upon request.

Condition: new, Year of construction: 2025, Yanigav Log Splitter FBH 210 / FBH210G / FBH210 E Dcedpfor D Nhqsx Ab Tsr • Weight: 470kg / 550kg / 700kg • Dimensions (LxWxH): depending on model and trolley length (1.51m; 1.81m; 2.11m) • Force: 15t / 19t / 7.5kW • Drive: PTO hub drive / hydraulic pump / three-phase electric motor • Log length: 121-211cm • Wedge length: 260mm Price: €5,600 / €7,500 / €10,000

Condition: new, Roll splitter for shredding waste rolls of paper and film - motor power 9kW - PLC-based control, two-hand safety circuit D2h9jg7 - Cutting force 35to - Splitting table straight version - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm - Machine weight approx. 4 tons -Color RAL 5012 - light blue - Hand protection grille in the area of the control panel and opposite Dcedpetvgzbsfx Ab Tsr - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Stock item - immediately available

Condition: new, Year of construction: 2025, Yanigav Log Splitter FBA26 Dcodpfx Ajr D Nhfob Tor • Weight: 350 kg • Dimensions (LxWxH): 1.0 x 2.0 x 0.9 m (working width: 2.9 m) • Force: 26 t • Drive: hydraulic pump • Log length: up to 110 cm • Log diameter: min. 30 cm • Wedge length: 38 cm

Condition: new, Year of construction: 2025, Motor power 7.5 kW - Cutting force 30 t Cutting channel designed for - max. roll length 1500 mm - max. roll diameter 1250 mm - Machine weight approx. 3800 kg - Tank capacity approx. 110 litres - Hand protection guard in the area of the control panel and opposite - Knife locking mechanism - Splitting table, straight design - Documentation supplied twice in German (1x printed, 1x USB) - Colour: RAL 5012 - light blue Protective guard/knife beam RAL 1028 melon yellow Dodpfx Ajltmi Sjb Tscr Machine in stock – immediately available Price and further information on request

Condition: new, Year of construction: 2025, Yanigav Log Splitter FB25 Dodpfx Abor D Ng Ts Tjcr • Weight: 730 kg with hydraulic winch • Dimensions (LxWxH): • Power: 25 t • Motor: Hub drive PTO • Log length: 50-115 cm • Log diameter: 35-80 cm • Wedge length: 35 cm

Condition: new, - Motor power 9kW - PLC-based control, two-hand safety circuit - Cutting force 35to - Splitting table straight design - Cutting channel: - max. blade length L= 2000mm - max. opening H= 1200mm Dsdpjd Hf Tdjfx Ab Tocr - Machine weight approx. 4 tons - Hand guard in the area of the control panel and opposite - Forklift entry shoes included (for easy transportation of the machine by forklift truck) Stock item - immediately available Price and further information on request

Condition: new, Year of construction: 2025, Yanigav Log Splitter FBW-8.5 • Weight: 112kg • Force: 8.5t Djdper D Ngzofx Ab Tocr • Motor: Single-phase motor with 2.5HP/1.85 kW • Log length: 54cm • Log diameter: 10–50cm • Wedge length: 24cm Price: €1,780