Used Gunther Splitter for sale (230)

Condition: used, Year of construction: 2012, No. 10020 Spiral shaft screen GÜNTHER SPLITTER Semimobil Used, year of construction 2012 Screen grain size 0/100 2-fraction star screen Cross discharge belt undersize splitter Extension web Horizontal cross feed belt Matching feed belt on splitter Blue-green conveyor belt approx. 5000 x 1000 mm LW Blue conveyor belt approx. 4500 x 1000 mm LW Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Iedpfx Ajwhzccsdnoa Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Approx. 3000 operating hours Incl. mobile deck 0/120 and stationary deck 0/60 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality Isdpfewhza Usx Adnja - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) - Blue conveyor belt approx. 3000 x 1300 mm LW Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: refurbished (used), functionality: fully functional, The Günther Injector Model: PI 54/105 is a versatile, industrial-grade brine injector designed for high-precision injection into meat, poultry, fish Precision & Output High Injection Accuracy: Features a position-controlled brine valve and a needle-bridge system to ensure the highest injection precision and uniform brine distribution throughout the product. High Throughput: Capable of up to 50 strokes per minute, ensuring high production capacity (estimates around 4,000 kg/h for the 54-needle configuration). Versatile Product Handling: Ideal for injecting products with or without bone across various applications (meat, poultry, fish). Adjustable Injection: Brine pressure is adjustable from 0.5 to 4.0 bar, allowing customization based on product density and desired injection percentage. Control & Hygiene MC2R Touch-Screen Control: Equipped with the MC2R-control with touch-screen, offering user-friendly operation and full automation potential. Recipe Storage: Includes 100 memory spaces for recipe storage, allowing for rapid product changeovers and consistent quality control. Automated Cleaning: Features an automatic sanitation program and a complete separation of the pump cycle from electromechanical components, minimizing maintenance and maximizing hygiene. Adjustable Clearance: The product passage height is typically 220 mm, with infinitely variable stroke height selection to precisely match the product being processed. Integrated Filtration: Supported by an inline-filter system (often electronically supervised) or optional automatic rotary filters, ensuring brine purity and protecting the pump system. Iedexxphfspfx Adnsa

Condition: good (used), Mobile Star Screen with conveyors with hook lift Isdpfxsxywa So Adnoa

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 25771, Günther Tumbler – Type GPA 150 TS 2 (Year of manufacture 1999) Used, fully functional Günther vacuum tumbler GPA 150 TS 2 from 1999, including vacuum pump and programmable control unit. Reliable machine for massaging and marinating meat, poultry, or fish. Robust construction – ideal for butcher shops and food production. Technical Data: Model: GPA 150 TS 2 Year of manufacture: 1999 Features: Integrated vacuum pump Control: Programmable control Drum volume: 150 liters Material: Stainless steel, food-grade Isdpfx Aexz Rzrsdnja Operating mode: Vacuum massaging / intermittent operation Condition: Used, functional The machine is ready for operation and is the perfect, solid solution for artisanal and industrial applications.

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Iedpfjxx Tmrox Adnja Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: used, For sale are 2 hot runner control units from Günther – one with 10 zones and one 15-zone unit. Price: 10-zone unit = €1,300 Price: 15-zone unit = €1,600 Dimensions (L x W x H): 470 mm x 370 mm x 150 mm Weight: approx. 4 kg Iedov Sml Sjpfx Adnoa Plug: 32A / 400 Volt

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H103-000-000, conveyor belt width: 1,600 mm, conveyor belt speed: 1,700 mm/s, total width: 1,854 mm, power: 2.2 kW (2.99 HP), axle spacing: 4,450 mm, construction width: 1,854 mm, Center distance: 4,450 mm Belt width: 1,600 mm Overall width: 1,854 mm Cheek height: 240 mm Conveyor speed: 1.0 m/s Belt quality: EP 400/3 4:2.0 mm normal quality Profiling: Steep conveyor belt, PB 1290 mm / PH 17 mm Drive: Van der Graaf drum motor Power: 2.2 kW Motor protection class/efficiency class IP 66 / ISO F Drive drum: Ø 160 mm (drum motor) Rubber coating: Metallic surface Deflection drum: Ø 175 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø 50 mm Idlers: Ø 63.5 mm Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm Isdpfx Aju T Ewwodnsa Side guide rollers: 2 pieces Ø 120 mm with grooved ball bearings Tensioning station: M16 threaded spindle

Condition: used, hot runner control device Günther DPT 10 10x fach 230 Volt Isdpfoh Uucfex Adnja price: 1.850 Euro contact: Mr. Rainer Eckerle

Condition: used, Injector Gunther Type: PI 26 Number of needles: 26 Needle diameter: 4 mm Max. product width: 340 mm Cycles per minute: 15 to 55 cycles/min Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0.5 to 4.0 bar Electric power: 3 kW Ijdpfx Adsw Ra Rpjnoa Voltage: 400 V Current: 16 A Machine dimensions (cm): Width: 70 Length: 170 Height: 200

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 1,750 mm, input voltage: 380 V, table width: 1,500 mm, table length: 2,000 mm, clamping force: 3,000 kN, table load: 14,600 kg, 300T Die Spotting Press Clamping Force:300T Lifting Force:82T Worktable Size:2000*1500mm Max. Daylight:1750mm Iodpeug Ughefx Adnja Min Daylight:0mm Stroke of Bolster:3000mm Overturn capacity:7.3T Overturn Degree:180° Motor Power:30Kw

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F Iodpfxjxx Ti To Adnsa INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: good (used), Year of construction: 2000, functionality: fully functional, Offered is a brine injector Günther PI-17 needle, year of manufacture 2000. In good condition, 380V, 16A. Further details on request. Cash payment or advance payment. Sale to commercial customers only. No warranty, no liability. Iedsw R Tv Sepfx Adnoa

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H105-000-000, conveyor belt width: 1,000 mm, conveyor belt speed: 3,500 mm/s, total width: 1,430 mm, power: 4 kW (5.44 HP), axle spacing: 4,460 mm, construction width: 1,430 mm, Center distance: 4,460 mm Belt width: 1,000 mm Overall width: 1,430 mm Cheek height: 250 mm Conveyor speed: 3.5 m/s Belt quality: EP 400/3 3:1.5 mm normal quality Ijdpou Ul Daefx Adnsa Profiling: Steep conveyor belt, PB 750 mm / PH 17 mm Drive: Van der Graaf drum motor Power: 4.0 kW Motor protection class/efficiency class IP 66 / ISO F Drive drum: Ø 215 mm (drum motor) Rubber coating: Metallic surface Deflection drum: Ø 175 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø50 mm Support rollers: Ø 50 mm (2 pieces of 560 mm per station) Idler spacing: 600 mm Idler bearing: Maintenance-free Return rollers: 1 piece Ø 50 mm Side guide rollers: 2 pieces Ø 50 mm, L = 120 mm Tensioning station: M16 threaded spindle Special design: Folding mechanism; can be locked via bolts

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s Isdpswhy T Tsfx Adnoa - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: used, functionality: fully functional, Tumbler with cooling system Iedpfx Adewd I E Ajnsa Manufacturer: Gunther Model: GPA 500K Made of stainless steel Dimensions: 2200 x 1650 x 2550mm Volume: 500 liters Electric power: 3.5kW

Condition: excellent (used), functionality: fully functional, Manufacturer: Günther Iedpewqgxhofx Adnoa Type: DP15/10 10 sections With cable

Condition: good (used), functionality: fully functional, Offered is a Günther PI-17 needle pickling injector. The impeller is new, as is the pressure gauge. 380V, 16A. Further details upon request. Ijdpfev Saflex Adnsa Cash payment or advance payment. Sale to businesses only. No guarantee or warranty.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H101-000-000, conveyor belt width: 1,420 mm, conveyor belt speed: 1,700 mm/s, total width: 1,420 mm, power: 4 kW (5.44 HP), axle spacing: 2,450 mm, construction width: 1,420 mm, Center distance: 2,450 mm Belt width: 1,200 mm Overall width: 1,420 mm Cheek height: 310 mm Conveyor speed: 1.7 m/s Belt quality: EP 400/3 3:1.5 mm normal quality Profiling: Steep conveyor belt, PB 900 mm / PH 32 mm Drive: Van der Graaf drum motor Power: 4.0 kW Motor protection class/efficiency class IP 55 / IE3 Drive drum: Ø 215 mm (drum motor) Rubber coating: Metallic surface Idler drum: Ø 190 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø50 mm Support rollers: Ø 63.5 mm fitted with buffer rings Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: Ø 63.5 mm / support ring Ø 108 mm Side guide rollers: Ø 50 mm Clamping station: M16 threaded spindle Ijdpfju S Adrjx Adnsa

Condition: used, Tumbler with cooling system Manufacturer: Gunther Model: GPA 300K Made of stainless steel Volume: 300 liters Capacity: 200kg Isdpstrgunsfx Adnsa Dimensions: 1950x1000x2100mm Electric power: 2.5kW

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 06742-H104-000-000, conveyor belt width: 1,254 mm, conveyor belt speed: 1,700 mm/s, total width: 1,254 mm, power: 1.5 kW (2.04 HP), axle spacing: 1,900 mm, construction width: 1,254 mm, Center distance: 1,900 mm Belt width: 1,000 mm Overall width: 1,254 mm Cheek height: 240 mm Conveyor speed: 1.7 m/s Belt quality: EP 400/3 3:1.5 mm normal quality Profiling: Steep conveyor belt, PB 750 mm / PH 17 mm Drive: Van der Graaf drum motor Power: 1.5 kW Motor protection class/efficiency class IP 55 / IE3 Drive drum: Ø 165 mm (drum motor) Isdsu Ttklspfx Adnja Rubber coating: Metallic surface Deflection drum: Ø 175 mm, spherically turned Bearing: Maintenance-free radial insert ball bearing Ø50 mm Idlers: Ø 89 mm Idler spacing: 500 mm Idler bearing: Maintenance-free Return rollers: --- Side guide rollers: 2 pieces Ø 120 mm with grooved ball bearings Tensioning station: M16 threaded spindle

Condition: used, Type: PI 54 Number of needles: 54 Needle diameter: 4 mm Max product: width 340 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 8kW Machine dimension in cm: Iedpfxok R Tqco Adnoa Width: 85 Length: 200 Height: 230 Delivery time: 30 working days after advanced payment

Condition: used, Type: PI 26 Number of needles: 26 Needle diameter: 4 mm Max product: width 340 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Iodpfx Aek Ruynodnoa Electric power: 4.5kW Machine dimension in cm: Width: 70 Length: 170 Height: 200 Delivery time: 30 working days after advanced payment

Condition: used, Injector Manufacturer: Gunther Model: PI 52 Iedpfx Aeui Iylsdnea Number of needles: 52 Needle diameter: 4 mm Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm

Condition: excellent (used), Machines belonging to the LINE (Ref. SOFIT code : YZ0900) Splitting Saw Machine (used to split in two parts the unique workpiece-panel) Minimum length of the workpiece: mm 250 (ca.) Maximum length of the workpiece: mm 3000 (ca.) Minimum width of the splitted workpieces: mm 120+120 (ca.) Ijdjf N Ngbjpfx Adnsa Maximum width of the splitted workpieces: mm 600+600 (ca.) Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Max forward speed: m/min 60 Along with the following groups: Lower Scoring Unit (power KW 3) max saw diameter mm 350 Upper Bevel Trimming Unit (power KW 3) max diameter mm 300 Main Sawing Unit (power KW 11) max diameter mm 450