Used Split Band Saw for sale (8,893)

Condition: good (used), Table size: 900x900mm Overhang: 630mm Prsdpfx Aholgvk Aecea

Condition: like new (used), For sale is a like-new Felder FB-510 band saw with a cutting width of 480 mm. This demonstration machine is in its original condition, so you will receive the full warranty. Technical data: - Cutting width 480 mm - Cutting height 410 mm - Table size 640 x 500 mm - Table tilt -10° to +45° - Blade length 4318 mm - Motor power 2.9 kW / 4 hp, 400 V version The band saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! For information, call 06244-20299. Predpfoznv I Rox Ahcoa Related terms: band saw, saws, saw, band Reference: R-A0117

Condition: good (used), Year of construction: 2014, Cutting range examples: at 90° 260mm round 300x260mm rectangle at 45° left or right 200mm round 180x180mm rectangle at 30° left or right 130mm round 120x120mm rectangle Quick miter adjustment from 30° to 150° in stepless increments of 0.5° as indicated on the scale. The miter pivot point is the intersection between the saw blade and the material support, thus preventing any change in the length dimension. End stops at 30° + 45° left and 30° + 45° right Manual material clamping. In every angle position of the saw frame, the material is clamped parallel at 90°. Cutting pressure is reduced by the self-weight of the heavy, torsion-resistant saw frame and fine adjustment depending on the material cross-section via a hydraulic damping cylinder. MEBA Micro-Dosing System complete with spray head. Machine stand with chip collection tray. Prjdpfx Aozrmk Rohcja with the option of hydraulic lifting of the saw frame.

Condition: used, machine/vehicle number: G-BBS112186P, Hydraulic log band saw Forestor CTR800H including the following accessories: 3m extension section, chain log turner, hydraulically rotatable log lifter, hydraulic log lifter with drive, saw band tensioning device, 11 kW motor, pre-cutting device, ammeter, saw band guide electrically adjustable, Prodovw Eb Aepfx Ahcoa LG Automat, irrigation pump with automatic switch-on Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Year of construction: 2001, machine/vehicle number: 21022, Item 25091 Technical specifications: - Roller diameter 420 mm Pjdpfx Aov U Swxjhcsra - Throat depth 400 mm - Max. clearance height 280 mm - Table size 600 x 600 mm - Table tilts in 2 planes ± 45° and ± 15° - Table height from floor approx. 975 mm - Saw blade length 3200 - 3400 mm - Continuously variable saw blade speed 10 - 260 m/min - Drive 400 V / 0.9 / 1.7 kW - Weight approx. 500 kg - Space required approx. W 750 x H 1950 x D 1150 mm

Year of construction: 2013, condition: ready for operation (used), Saw blade dimensions: 41mm x 5100mm, max. cutting diameter: 350mm, dimensions X/Y/Z: 4400mm/1800mm/2000mm, weight: approx. 2400kg. Prsdpfx Astufcaehcja

Condition: excellent (used), CATALOG NUMBER 7116 TECHNICAL DATA - Wheel diameter: 630 mm Prsdpfx Ahszh Hv Sscsa - Table dimensions: 880x700 mm - Table adjustable at an angle - Motor: 3 kW - Max cutting height: 300 mm - Throat (blade to frame): 580 mm - Extraction nozzle diameter: 90 mm - 2 speed settings - Brake - Dimensions (L/W/H): 1200x920x2250 mm - Weight: 702 kg ADVANTAGES – Manufactured in Poland – DTR technical documentation – Very good condition – Used saw Net price: 8,500 PLN Net price: 2,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major fluctuations in the exchange rate, the price may change)

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. Prsdpfomrnk Eox Ahcea The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: ready for operation (used), A Tmj mitre-cutting band saw is offered. Cutting capacity at 90° round: 500mm, cutting capacity at 90° square X/Y: 500mm/500mm, cutting capacity at 45° round: 370mm, cutting capacity at 45° rectangular X/Y: 500mm/370mm, cutting capacity at 60° round: 250mm, cutting capacity at 60° rectangular X/Y: 500mm/250mm, mitre range: 90°-60°, saw blade dimensions X/Y/Z: 5620mm/41mm/1.3mm, max. cutting speed: approx. 100m/min, max. length stop: 1000mm. Dimensions X/Y/Z: approx. 2800mm/1260mm/2300mm, weight: approx. 1550kg. Inspection possible by prior arrangement. Podpfx Aozrzpbjhcjra

Condition: used, Year of construction: 2019, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Features: Prsdozvhkmopfx Ahcoa - Robust electro-hydraulic semi-automatic band saw (INDUSTRIE) - With miter cuts from 45° right to 60° left * Mitre adjustment via a large turntable - MEP EVO microprocessor control for managing all functions * Front right, swiveling - Optional manual or automatic lowering of the saw frame * Stepless adjustment of the saw frame lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioningâ??includes digital display - 2 saw blade speeds - Coolant system - 1 angle stop - Chip removal brush - Machine base frame with forklift pockets - Operating instructions in German - Replacement saw bands Semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw frame - Electro-hydraulic lifting of the saw frame - Electro-hydraulic opening of the vise *Optional equipment: - 2000 mm feed roller conveyor - 2000 mm discharge roller conveyor, including stop

Condition: used, Year of construction: 2014, cutting diameter 305 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm Predpfxjzu A R Ee Ahcea 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 600 kg dimensions of the machine ca. 1700 x 1500 x 1950 mm Features: - Semi-automatic operation via automatic saw frame lowering - Miters: left 60°, right 45° - 2 speeds: 40 and 80 m/min - Solid material support table - Operatorâ??s manual

Condition: good (used), Year of construction: 2010, Used semi-automatic band saw from Bomar Type STG 440 DGH Capacity at 90 degrees: ø 440 mm / flat: 610 x 440 mm Prsdpfezvyizex Ahcoa Mitre cutting on two sides Includes a 6-meter infeed and outfeed conveyor with an analog measuring system (not shown in the picture).

Condition: used, Technical details: dimensions of saw-band: 5750 mm throat: 605 mm workpiece height: 460 mm max. table load: 250 kg table - inclinable: 15 -30 Grad Podpfoy Rm T Esx Ahcora band speed: 27 - 2200 m/min table height: 1125 mm Table dimensions: 740 x 785 mm motor capacity: 5,5 kW machine weight approx.: 1750 kg dimension machine approx.LxWxH: 1,82 x 0,97 x 2,55 m Machine is sold without electrical control cabinet! This machine was integrated into a production system and operated as part of a larger manufacturing process. The Mössner Rekord SSF 630 is a heavy-duty vertical industrial band saw designed for metal and special materials. It belongs to the renowned REKORD series by Mössner (Germany) and is considered an extremely robust and precise machine for workshop and industrial applications. The SSF 630 is suitable for sawing: ·Steel ·Stainless steel ·Aluminum ·Tool steel ·Plastics · Special materials *

Condition: used, Year of construction: 1981, machine/vehicle number: 7295, functionality: fully functional, Canali ML 1100 Machine No.: 7295 Podpeyqxt Njfx Ahcsra Year of manufacture: 1981 TECHNICAL DETAILS Gbe Doyqxt Njkknm Tor Saw blade length min.: 6,350 mm Saw blade length max.: 6,500 mm Saw blade width min.: 90 mm Saw blade width max.: 120 mm MACHINE DETAILS Saw band tensioning: Pneumatic saw band tensioning Design: Double band saw (twin version)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cutting height (max.): 260 mm, cutting width (max.): 260 mm, cutting range round steel at 45°: 260 mm, cutting speed: 100 mm/min, saw band length: 1,900 mm, Manufacturer: Jaespa Model: W260 HA Year of manufacture: 2018 Technical data: ----- - Bandsaw blade: 3,660 x 27 x 0.9 mm - Drive power: 1.5 kW Prodoxvd Tqopfx Ahcsa - Cutting speed: 15 - 100 mm/min - Max. cutting capacity (round): 260 mm - Max. cutting capacity (square): 260 x 260 mm - Infinitely variable angle adjustment +/- 45° - Hydraulic material clamping - Hydraulic feed with automatic shut-off - Automatic bow lifting after cutting - Coolant pump - Frequency-controlled band drive - Weight: 420 kg - Dimensions LxWxH in mm: 1,900 x 750 x 1,220 Accessories: ----- - Roller conveyor 1,500 mm

Condition: used, Automatic band saw, used but technically in good condition. Maximum capacity: Ø 260 mm Psdpfx Ajw N Iw Ijhcera

Condition: good (used), Table size: 610 x 610 mm Height: 780 mm Psdpfx Ahjixtu Necjra Adjustable table!

Condition: used, Year of construction: 2013, Used semi-automatic band saw from FMB Type: Omega Capacity: 240 mm Prsdszvyqropfx Ahcea Double miter cut capability Year of manufacture: 2013 Includes roller conveyor

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V Prodpfx Aev Dg A Ujhcea

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: – Diameter of guide wheels: Ø 600 mm – Cutting height: max. 360 mm – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm – Maximum blade/bandsaw width: 35 mm – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm – Weight: ~300 kg Pjdey El U Depfx Ahcsra

Condition: excellent (used), table dimensions: 1170x800 maximum cutting width: 780 mm maximum cutting height: 480 mm flywheel diameter: 45 mm weight: 820 kg year of manufacture: 1998 Podszvn Sdjpfx Ahcsra power: 5.5 kW speed: 690 RPM CE marking

Condition: good (used), Metal band saw, band saw machine, vertical band saw -Passage width: 380 mm -Passage height: 230 mm -Table: swiveling Psdpfsfiqrcex Ahcsra -Speeds: 12 pieces min: 45 rpm max: 800 rpm -Dimensions: 1150/715/H1900 mm -Weight: 522 kg

Condition: excellent (used), CATALOG NUMBER 7050 Pjdpfx Ahezrlfmscsra TECHNICAL DATA - Wheel diameter: 800 mm - Table dimensions: 1100x800 mm - Angle-adjustable table - Motor: 5.5 kW - Max cutting height: 340 mm - Throat/clearance (blade to frame): 680 mm - Extraction port diameter: 90 mm - Dimensions (L/W/H): 1500x950x2600 mm - Weight: 987 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 8,900 PLN Net price: 2,120 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 1001058, power: 4 kW (5.44 HP), type of input current: three-phase, cutting height (max.): 800 mm, total height: 800 mm, overall weight: 2,960 kg, coolant pump power: 120 W, cutting range round steel at 45°: 440 mm, cutting range round steel at 90°: 800 mm, cutting range square steel at 45°: 440 mm, cutting range square steel at 90°: 800 mm, height adjustment type: hydraulic, roll diameter: 800 mm, saw band length: 820 mm, saw blade length: 8,200 mm, Excellent working condition. Last 2 years doesn’t work Pedpfx Asxwcd Dshcora

Condition: excellent (used), Year of construction: 2006, Berg & Schmid CNC Sawing Machine Year of manufacture: 2006 Control system: - CNC control (freely programmable) Cutting range: - Round: 410 mm - Flat: 410 mm - Width 3500 x Length 2000 x Height 2200 mm - Working height 730 mm Cutting speed: - 12 – 110 m/min. - Material feed via precision ball screw and linear guide. - Hydraulic saw blade tensioning. - Automatic double-sided saw blade free-travel device. - Hydraulically driven chip conveyor. - Chip pressure regulation for thin-walled tubes and profiles. - Frequency-controlled sawing drive, stepless. - Automatic initial cut function. - Saw blade path monitoring Sawing drive: Predpfxezp Inlo Ahcja - 5.5 kW Accessories: - 10 new saw blades Delivery time: - Immediate