Used Speedmaster 72 for sale (2,115)

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Nedpjxr A R Tjfx Ahvecp Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Matsuura G-Tech 30i, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -220 °, swivel angle B-axis (max.): 220 °, TECHNICAL DETAILS X-axis: 550 mm Njdpfxjv Rb Hho Ahvjcp Y-axis: 410 mm Z-axis: 450 mm B-axis: ±220° C-axis: 360° CNC control: Matsuura G-Tech 30i Spindle and tool Speed range: 20,000 rpm Tool holder: BT40 Tool length: 300 mm Tool diameter: 150 mm Tool weight: 10 kg Workpiece capacity Workpiece diameter: 300 mm Workpiece weight: 40 kg MACHINE DETAILS Machine dimensions (W x H x D): 3,032 × 5,120 × 2,705 mm Power consumption: 32 kVA EQUIPMENT - Internal cooling system - Automatic pallet changer - Automatic Tool changer - High-pressure cooling 20 bar - Chip conveyor - FSE chip control

Condition: good (used), geared motor, electric motor -Speed: 72 rpm -Power: 0.25 kW Ncodpfx Ajb A Rm Eshvop -Design: B14 angle -Shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 320/200/H220 mm -Weight: 9.5 kg

Condition: ready for operation (used), Galil DMC 1540-72 servo controller for 2-axis control, SN: KK-3092, used, in good condition, 100% functional, scope of delivery as per photos. Nedpfx Ahsx Erphovjcp

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Features and technical data: - Condition: well-maintained - Raise/lower and tilt 0-45° with hydraulic foot pedal - With fine and quick stroke function, fully maintenance-free - With digital display on the circular saw fence for cutting width - With fixed angle adjustment on the length stop for 75/67.5/60/45 degrees - Cutting height: 145 mm - Cutting width: 1050 mm - Cutting length: 3300 mm - Speeds: 2800-4000-5500 rpm - Motor: 5.5 kW - With scoring unit Njdsx Enq Iopfx Ahvecp Availability: short-term Location: Röllbach

Condition: used, functionality: fully functional, Thermo Scientific FH100X NO.72-320-100 Peristaltic Pump. Thermo Scientific FH100X peristaltic pump is ideal general purpose tubing pumps for high-repeatability, precision metering, and worry free performance in a variety of life science, industrial and process applications. The broad flow range capability of this unit make them ideal for laboratory to pilot process scale-up requirements. Nedoupvvkopfx Ahvjcp FH100X unit, our highly regarded peristaltic pump technology is combined with innovative digital control to provide robust performance at an economical value. This unit offer a reliable alternative to lab piston metering pumps, gear pumps and small circulating pumps used in life science laboratory applications. This stackable, variable speed pumps are self priming, able to operate dry, and contain no valves or seals eliminating replacement needs. Fluid contacts only the tubing, providing for contamination-free pumping in high-purity applications. Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Prinect Classic Center Control Station Heidelberg Autoplate (Automatic Plate Changing System) Washers Grafix Alphatronic 200: Powder Sprayer Nodpexrtbvofx Ahvscp Alcolor Dampening Technotrans Combistar compact alpha c. 120 L Ink Temp Control Impression Account: 62 Mio.

Condition: used, functionality: fully functional, Ferwood Code: RU0011535 - Manufacturer Code: 163389 - Condition: Used - Functionality: Fully functional - If interested we offer an overhaul service, contact us. Nedev I Dgljpfx Ahvscp

Year of construction: 1995, condition: used, In Good Condition Ncjdpfx Aodq Uf Hohvsp

Condition: good (used), Year of construction: 2004, functionality: fully functional, Coating Unit Optional Printing Thickness: 0,5mm Ncodpfowr T Rtox Ahvsp Extended Delivery (X1) CP 2000: Touch Screen Console Straight Machine Alcolor Dampening Grafix Alphatronic 200: Powder Sprayer Ink unit Temperature Control Technotrans (Aircooled) Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device Semi Automatic Plate Change High Pile Delivery IR Dryer Heidelberg Impression Account: 98 Mio.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 207817, Anicolor Printing Thickness: 0,6mm +Version Ncsdpfxjv Rm Evj Ahvop CP 2000: Touch Screen Console Straight Machine Alcolor Vario Dampening Grafix Alphatronic 200: Powder Sprayer Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device Technotrans Cooling Device Semi Automatic Plate Change Watercooled Press Ink. Temperature Control Impression Account: 10 Mio.

Condition: good (used), Year of construction: 2004, functionality: fully functional, CP 2000: Touch Screen Console Preset Plus Feeder Ncedpfx Ajwlq R Rehvep Alcolor Vario Dampening Heidelberg Autoplate (Automatic Plate Changing System) Technotrans Cooling Device Ink. Temperature Control (Watercooled) Grafix Exatronic Duo Plus: Powder Sprayer Perfecting 1/1 - 2/0 Eltex Antistatic Device Washers Impression Account: 310 Mio.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Full Automatic Perfector 5/0 - 2/3 Heidelberg Autoplate (Automatic Plate Changing System) Prinect Press Center Control Station with Wallscreen Prinect Axis Control: High-performance Color Measurement System Preset Plus Feeder DryStar Combination CANopen IR Dryer with 2 Slides (IR/Hotair) Ultrasonic Double Sheet Control InkStar CAN Preset Plus Delivery X2 / 160 cm (2 modules) FilterStar: 2-stage dampening solution filtration system ( for Hydro and Combistar) Technotrans CombiStar CANopen: Ink. Temperature Control (Watercooled) CoatingStar CANopen PowderStar AP 500-P: Powder Sprayer Staticstar Compact: Antistatic Device on Feeder & Delivery Coating System with Doctor Chamber Blade Ncjdew T Tqzopfx Ahvep Steel Plate in Feeder & Delivery AirStar: Central Air Supply Cabinet (Aircooled) Dynamic Sheet distance control in the Delivery trough a Ultrasonic Sensor AirTransfer System (For Sheet Transfer) Double Sized Impression Cylinder - Chromed Alcolor Vario Dampening Automatic Washing Devices Impression Account: 230 Mio.

Condition: good (used), Year of construction: 1999, Heidelberg Autoplate (Automatic Plate Changing System) +Version Alcolor Dampening CP Tronic Control System Automatic Ink Roller Washing Device Blanket Washing Device Impression Cylinder Washing Device Ncjdpfx Asw U A Npjhvop Grafix Alphatronic 200: Powder Sprayer

Year of construction: 2001, operating hours: 126,000,000 h, condition: good (used), machine/vehicle number: 204750, Perfecting 2/2 - 4/0 CPC 1-04: Off Press Ink & Register Control Alcolor Dampening Semi Automatic Plate Change Grafix Alphatronic 200: Powder Sprayer Technotrans Cooling Device Automatic Ink Roller Washing Device Blanket Washing Device Staticstar Compact: Antistatic Device Impression Account: 126 Mio. Nodslml Nhjpfx Ahvscp

Condition: refurbished (used), Year of construction: 1986, Alcolor dampening Baldwing CPC WEKO PERFECT CONDITION Ncedpsxyikisfx Ahvjp

Condition: excellent (used), Year of construction: 2006, Year 2006 Cutting width 72 cm Njdov H Eyqopfx Ahvecp Spare knife Air table

Condition: used, Year of construction: 2010, 530 x 740 mm (20×29″) approx. 176 million prints PressCenter AxisControl Alcolor Autoplate extended delivery Autom. Ink roller washing device, automatic blanket washing device, automatic counter-pressure washing device high pile delivery separate coating unit with chamber doctor blade system IR dryer, AirStar, inking unit temperature control perfecting 2/3 antistatic device scale feeder Nodpfxep Ugwtj Ahvjcp powder device, available at short-notice

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Nodpju H R Iwsfx Ahvjcp Very good condition

Year of construction: 2023, condition: new, New machine Year of manufacture: 2023 DESCRIPTION User-friendly operating concept Ncedpsw I U Ikefx Ahvop Efficient design for cost-effective and safe operation Cooling fan with speed control from 0 - 100%, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wearing parts with a constant pressure dew point Control displays five different alarm states and stores them in memory Refrigeration compressor switches off below 15°C ambient temperature if no compressed air is flowing through Clear layout and easy accessibility of all maintenance components Equipped with built-in automatic condensate drain Key benefits at a glance: - High efficiency - Excellent price-performance ratio - No unnecessary compressed air losses thanks to integrated electronic condensate drain - Connected tools and machines are optimally protected - User-friendly operating concept TECHNICAL DATA General information - Air flow rate: 1200 l/min - Air flow rate: 72 m³/h - Maximum pressure: 16 bar - Air connection: ½" - Power consumption: 0.2 kW Dimensions and weights - Length (product): approx. 325 mm - Width/depth (product): approx. 430 mm - Height (product): approx. 445 mm - Weight (net): approx. 24 kg Availability: short-term Location: Hochheim

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, simultaneous 5-axis version - SIEMENS 840 D SL control - Working range X= 780, Y= 600, Z= 520 mm - C-axis 360° Ncodpfx Aor T S Nhohvep - B-axis -50°/+110° - Table clamping surface 720 x 540 mm - Spindle speed 20 - 15,000 1/min - Tool magazine 60 places - HSK 63A tool holder - High pressure system IKZ 40 bar - Measuring probe 3D Weight 8,100 kg

Condition: good (used), Year of construction: 2020, table load: 7,000 kg, table width: 1,200 mm, total length: 1,200 mm,   Build with double hirth coupling T slot 22 with Jump off 200 mm Diameter off center hole 50 mm Table Length: 1200mm Table Width: 1200mm Table load: 7000 Rotation B-Axis:1 or 5 Gr.° Length: 1200mm Width: 1200mm Height: 340mm Ncjdpfx Aewq Rmcshvop Weight: 2000kg

Year of construction: 2012, condition: excellent (used), Category: Twin-screw extruder Number: DE27691 Manufacturer: Feddem Nedpfx Ahevk Sgfevocp Type: DEC 72 MTS Year of manufacture: 2012 Capacity: 400 – 700 kg/h Screw diameter: 2 x Ø 72.0 mm L/D: 32D, including housing extension to 42D Drive: 168 kW Material: PE, PP, PS, ABS // Additional details: Co-rotating extruder, degassing – 2 side feeders, 6 Schenk gravimetric dosing units, ECON EUP 600 underwater pelletizer, Trendelkamp classifying screen, degassing, vacuum pump, BSG control system Very nice complete system with only approximately 3,500 operating hours. The offer doesn't meet your requirements? Please visit our website: "Plama Engineering" or send us your detailed inquiry, we have the right product for almost every budget.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 680 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 625 mm, rotational speed (max.): 15,000 rpm, swivel angle B-axis (min.): -110 °, swivel angle B-axis (max.): 65 °, Machining center with large tool magazine with 240 slots and pallet changer for 40 units TECHNICAL DETAILS X-axis: 680 mm Y-axis: 400 mm Z-axis: 625 mm B-axis: +65º to -110º C-axis: 360º Distance pallet-spindle nose: -86 mm to 540 mm Distance pallet center-spindle nose (B-axis -90º): 60 mm to 685 mm Distance pallet center-column guide: -25 mm to 375 mm Distance spindle center-column guide: 227 mm Distance floor level-pallet surface: 1,165 mm Control: Fanuc 16iMB Spindle details Spindle speed: 40 – 15,000 rpm Spindle taper: 7/24 steep taper #40, Big PLUS Spindle diameter: 80 mm Spindle torque: 135 Nm / 850 rpm Spindle power: 15/7.5 kW Feed and rapid traverse Rapid traverse X/Y/Z: 30 m/min B-axis: 10 rpm C-axis: 13.5 rpm Ncsdpjwqc Ufofx Ahvjp Feed X/Y/Z: 1 - 15 m/min B-axis: 1 - 2,160º/min C-axis: 1 - 3,600º/min Tool and Pallet Number of tools: 240 Max. tool Ø: 80 mm Max. tool Ø with empty adjacent stations: 150 mm Max. tool length: 260 mm Max. tool weight: 8 kg Pallet changer with: 40 pallets Workpiece dimensions Max. workpiece diameter: 360 mm Max. workpiece height: 250 mm MACHINE DETAILS Year of manufacture: 2003 Commissioned: 2004 Machine weight: 11,700 kg Installation area: 4,945 x 3,655 mm Machine height: 3,210 mm EQUIPMENT - Encoders for B and C axes - Direct measuring system Heidenhain for X, Y, and Z axes - 30 l/min / 20 bar internal cooling - Scraper belt chip conveyor - Timer Power on / Power off - Measuring probe RENISHAW MP 10 Easy Probe - Laser Renishaw NC 1 - 2 MB memory - 8 additional M-functions - Number of tool corrections: 999 - Increase of workpiece coordinate systems from: 6 to 54 - Coordinate system rotation: G68/G69 - Automatic zero point tracking - Program restart

Year of construction: 2006, condition: new, I sell 12 sets of new saw blades suitable for HOLZMA panel beam saw machines. Main saw blade FABA 600 x 5,8 / 4,0 x 60 Z 72 Njdpeg Dvutjfx Ahvocp Scoring saw blade AKE 26 200 45H 200 x 4,8 - 5,8 x 45 Z=36 Price totally 1000 Euro. Available immediately.