Used Speedmaster 52 for sale (3,680)

Condition: good (used), three-phase motor, electric motor -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg Dkodpfx Ajd E Tfroc Hep

Condition: excellent (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter Dedpewbzzxofx Ac Hokp -Manufacturer: Ecoair, Air Oil Separator Filter Type N 2785000 / 49 302 52 171 -Inside/outside: Ø 110/170 mm -Bolt circle: Ø 210 mm -Quantity: 1x air filter available -Dimensions: Ø 245 x 420 mm -Weight: 3.4 kg.

Condition: good (used), geared motor, electric motor -Speed: 52 rpm -Power: 0.37 kW -Design: B3 Dedpfx Acsb A R Nxe Hskp -Shaft diameter: Ø 14 mm -Protection class: IP 55 -Weight: 10 kg

Condition: good (used), servo motor, electric motor, DC motor, stepper motor, stepping motor, compact asynchronous motor -Manufacturer: phytron, stepper motor type ZSS 52-200-2.5 25:1 -Manufacturer gearbox: Gysin type GPL 052-2S/25-1 i 1/7 Dkjdpfxevrdmts Ac Hjp -Dimensions: Ø 82 x 185 mm -Total weight: 2.9 kg

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter, control module -Manufacturer: B&R, Processor Controller with bus base -Type: X20 CP 0483 Dedoyhnb Depfx Ac Hskp -Bus base: X20 BB 52 -Dimensions: 100/40/H80 mm -Weight: 0.3 kg.

Condition: good (used), Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 50-52 mm shaft -for gland tape Dodpfx Acodfglko Hskp -Number: 8x glands available -Price: per piece -Dimensions: 144/144/H68 mm -Weight: 2.9 kg

Condition: used, Servo motor, electric motor, DC motor, servo gear motor -Manufacturer: Dunkermotoren, servo geared motor -Type: BG 45x30 BGE45CI -Voltage: 24V -Speed: 3360 rpm Dkjdpfxofi Tu Us Ac Hjp -Gearbox: PLG 52 i = 64:1 -Shaft: Ø 12 x 20 mm -Dimensions: 230/61/H61 mm -Weight: 1.8 kg

Condition: used, Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle -Pipe elbow: welding elbow 90° 45° 0° 590 pieces -Type: 52 different versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H400 mm -Weight: 322 kg Dsdsq N E R Hepfx Ac Hekp

Condition: good (used), Pressing tool, sheet metal former, forming tool, bending tool, folding tool, bending tool, die, die-casting tool -Bending tool: Pressing tool for press brake / press, 5 pieces -Length: 2x 300 mm / 1x 275/200/175 mm each -Groove width: 58/52 mm -Angle: 90° Dimensions: see photos / technical drawing -Price/Fee: complete -Transport dimensions: 450/300/H115 mm Dkodpfx Aov Szbhec Hop -Weight: 48.3 kg

Condition: used, Three-phase motor, electric motor -Manufacturer: Volta, electric motor from guillotine shears Stankoimport 3218 -Type: AOC2-52-6 - C1 -Power: 9 kW -Speed: 890 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Dimensions: 570/370 / H315 mm Dodpfogzwx Eex Ac Hekp -Weight: 112 kg

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 26/52 rpm -Power: 0.21/0.28 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 54 Djdpfx Aed N E Ntsc Hjkp -Dimensions: 452/114/H215 mm -Weight: 16 kg

Condition: used, Year of construction: 2007, machine/vehicle number: 8220TTC, FANUC Oi-TC control system, 12-position tool changer, maximum spindle speed of 5,000 rpm, power 25 kW, chip conveyor. Dkodey U R R Nopfx Ac Hsp

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, WE NEED SPACE! Summer Deal Refurbished folding machine, year of manufacture 2005 In excellent, well-maintained condition. Sheet sizes: min. 110 x 100 mm, max. 520 x 850 mm Minimum fold length: 35 mm Job memory: 200 jobs Usage: 42 million sheets (1st unit); 11 million sheets (2nd unit) 1st folding unit: 6 automatic buckle plates; automatic roller and stop adjustment Steel segment rollers (replaced 1 million sheets ago) 2nd folding unit: 4 buckle plates; newly refurbished rollers FSA flat pile feeder with side air blast Pico compressor AM 52 timed delivery Gate-fold plate Bridge unit 380 V / 16 A; all maintenance-free three-phase motors Original photos from the customer Dkedpfjy Uciqox Ac Hsp Dismantling date: July 1, 2026 Availability: Immediate

Condition: excellent (used), Scm S 52 thickness planer. Djdpfszipiqox Ac Hjkp

Condition: used, Year of construction: 1971, Cutting head with Z = 2 strip-planing knives, planing width 520 mm, fixed fence. Fence rail length: 2750 mm, infeed table: 1600 mm, outfeed table: 1100 mm, overall length: 2800 mm. No motor brake/emergency stop. Dodpfxoy Ui U Hj Ac Hjkp Location: Nattheim.

Condition: excellent (used), machine/vehicle number: 52-8FDJF35-82214, Year of construction: 2022, operating hours: 671 h, lifting height: 4,300 mm, free lift: 2,150 mm, fuel type: diesel, mast type: triplex, gearing type: automatic, fork length: 2,400 mm, Lifting capacity: 3.500 kg Maximum passing height: 287,5 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information = Additional options and accessories = Dkedpfx Acszihxqe Hop - Free lift

Condition: excellent (used), machine/vehicle number: 52-8FDJF35-85556, Year of construction: 2023, operating hours: 110 h, lifting height: 5,500 mm, free lift: 1,690 mm, fuel type: diesel, mast type: triplex, gearing type: automatic, fork length: 1,200 mm, Lifting capacity: 3.500 kg Maximum passing height: 287 cm Dkjdpszihxkjfx Ac Hop Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information = Additional options and accessories = - Free lift

Condition: excellent (used), machine/vehicle number: 52-8FDF30-84322, Year of construction: 2022, operating hours: 177 h, lifting height: 5,000 mm, free lift: 1,270 mm, fuel type: diesel, mast type: triplex, gearing type: automatic, fork length: 1,000 mm, Lifting capacity: 3.000 kg Maximum passing height: 242 cm Dkjdpfjzihw Tox Ac Hsp Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information = Additional options and accessories = - Free lift

Condition: good (used), Year of construction: 2008, XYZ Compact Turn 52 CNC lathe with barfeeder Year: 2008 Technical details: Bar Capacity 52mm Chuck Size 150mm (6") Djdszg Intepfx Ac Hekp Control Siemens 810D Shopmill Distance Between Centres 280mm Maximum Cutting Diameter 220mm Maximum Cutting Length 280mm Rapid Feedrates 20m/minute Spindle Motor Power 20Hp Spindle Nose A2-5 Spindle Speed 5000rpm Swing diameter 400mm Swing Over Carriage 400mm Tailstock Quill Diameter 60mm Tailstock Quill Stroke 90mm Tailstock Taper MT4 Tool Size 20 x 20mm Tooling Configuration VDI 30 Turret Positions 12 X axis Travel 185mm Z axis Travel 325mm Machine Dimensions 2531 x 1778 x 1720mm Machine Weight 2590kg Accessories/options: - LNS servo barloader - Foot pedal for chuck operations - Parts catcher - Renishaw tool setter - Tailstock - VDI 30 tool holders - Swarf conveyor - Documentations Under power in our warehouse, possible to test it anytime!

Condition: used, functionality: fully functional, Application: Production of books and brochures with softcover perfect binding from printed paper sheets. System components: • 2x folding machines MB Bäuerle (main folding unit CAS 52/4 & second folding unit CAS 52/0/4-SL “self-propelled”) • Inclined roller tables (SRT 52 / SRT CAS 52-A-Right / integrated alignment stations) • 1x perfect binder C.P. Bourg BB3202 EVA CP (consisting of perfect binder BB3002 and Book Compiler BBC) • Transfer bridges / conveyor belts (including transfer bridge 52 & IF 42) • Window folding pockets (4x CAS 52) • Ionization devices • Extraction / fume hood with condensation filter Technical data – folding system (MB Bäuerle CAS 52): • Maximum sheet format: 52 x 85 cm (base CAS 52) / up to 52 x 132 cm (with ART 52) • Minimum sheet format: 10 x 12 cm (base CAS 52) / 10 x 10 cm (main folding unit) • Minimum folding length: 35 mm • Maximum production speed: 200 m/min • Parallel folds: All common variants • Format second folding unit (self-propelled): max. 42 x 42 cm / min. 10 x 18 cm • Features self-propelled: Mobile, autonomous control panel, integrated scoring device • Interfaces: DFA 1 Interface (Digital Finishing Architecture), interface for selective folding for C.P. Bourg connection • Sensors: Paper thickness sensor for calculating the distance between folding rollers, reflection light barriers for sheet monitoring Technical data – perfect binder & compiler (C.P. Bourg BB3202 EVA): • Operating modes: Perfect Binding (with cover) & Padding mode (block binding without cover) • System performance (BBC + BB3002): up to 300 books / hour • Standalone operation (only BB3002): up to 600 cycles / hour • Sheet feed (BBC): up to 300 sheets / minute (A4) • Book formats: min. 195 x 139 mm to max. 370 x 320 mm • Book thickness: 1 to 60 mm • Paper weight, book block: 60 to 160 g/m² • Paper weight, cover: 80 to 300 g/m² • Cover stack height: max. 80 mm • Milling: 0 to 3 mm (electrically adjustable) Dksdpoy T H Uzofx Ac Hsp • Gluing: Side gluing included (temperature adjustable from 130–180 °C) • Cover processing: Integrated scoring • Additional equipment: Vibration module (jogger) for alignment, misfeed detection The system was in successful operation for many years and is now ready for collection. If desired, the sale of individual machines is also possible. We would be happy to arrange an appointment for an on-site inspection. If you have any questions or are interested, we look forward to hearing from you!

Condition: used, Mixing Grinder Dedpfxjhzcg No Ac Hskp 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending on meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Condition: used, Injector Manufacturer: Gunther Model: PI 52 Number of needles: 52 Needle diameter: 4 mm Tact per minute: 15 to 55 tact/min. Product passage height: 220 mm Dkjdpeui Iylefx Ac Hjp

Condition: used, Mixing Grinder 130 mm hole plate diameter Throughput depends on material type, speed, and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Dsdpfx Aeikq Rtsc Hjkp Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 150 liters ( mixing capacity depending on meat up to 100 kg ) The worm, worm housing, and closing are completely stainless Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMGATE, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 52 Tandem Emboss Machine is "embossing ready" - including a unique embossing module. Various embossing patterns/rolls available. New, Manufactured 2024 Specifications: Dsdpfxeziavuj Ac Hekp Max. production speed: 25 m/min (2121 B2 sheets/h) Max. output of the feed. head: 8000 sheets/h Min. sheet size: 20 × 20 cm Max. sheet size: 56 × 80 cm Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0), Max 1.4 mm (with overlap < 0) Max. paper pile height: 52 cm Thickness of laminating film: 24-50 µm Kind of laminating film: OPP, PET, Nylon Time of laminating roll warm up: Approx. 4 min Sheet overlap accuracy: ± 1 mm Machine dimensions (incl. delivery desk): 3.07 x 1.13 m Consumption of compressed air: 65 l/min Max. consumption of compressed air: 95 l/min Max. pressing force: 15 kN Max. consumption of electricity: 7 kW Machine weight: 820 kg Recommended machine capacity: 100 000 sheets/month Machine Characteristics Comes out of the well-known and proven concept of the Amiga laminator. Thanks to modular design, the embossing module is in fact “inserted” between the laminating unit and separator of standard Amiga. The solution, with two processing units in a row, makes it easy to switch from standard single side lamination to embossing, which creates a special pattern on the laminated surface. 7 standard patterns available. Special patterns on demand. First unit for lamination is always activated and works with IR heated cylinder. Second unit is activated only when embossing is needed. The pattern is created due to sheet preheating before the processing unit and high pressure of PUR roller pressed to the structured cylinder. The cooling of the embossing cylinder helps to "freeze" the pattern to the laminated substrate. Basic configuration Feeder: Komfi single action feeding head. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Additional separation adjustable blowers for reliable separation of sheets from the pile. Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwind air expansion shaft for 3″ reel core. Adjustable spread roll for perfect smoothing of difficult film before lamination roller. IR heating for laminating cylinder. Temperature sensor inside the cylinder for extremely precise regulation. Rubber coated pressure roller for laminating unit, PUR pressure roller for embossing unit. Embossing Unit: Sheet preheater in front of the embossing roller to activate surface before embossing occurs. Powerful pneumatic pressure system to ensure excellent laminating and embossing result. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in perforator to enable sheet separation, placed behind pull rollers to avoid web brakes. Cam driven separation roller. Skewing wheel for fine adjustment of snapping to avoid film flagging. Adjustable speed of snapping roller for perfect separation of difficult jobs. Fixed delivery desk.

Condition: excellent (used), Year of construction: 2002, Machine Configuration & Features Perfecting Configuration: 2+2 or 4+0 printing Dodpfxjzh Rblo Ac Hskp CP 2000 Console: Centralized off-press control system for efficient press management Alcolor Continuous Dampening System: Ensures stable ink/water balance and consistent print quality Ink Temperature Control: Maintains optimum ink viscosity for superior color stability Technotrans Refrigeration & Recirculation System: Integrated temperature-controlled dampening solution circulation with external cooling unit Preset Stream Feeder: Fully automatic preset feeder for rapid job changeovers and reliable sheet feeding Autoplate: Semi-automatic plate changing system for reduced makeready time Automatic Ink Roller Washing System: Fast and efficient cleaning between production runs Automatic Blanket Washing System: Automated blanket cleaning for consistent print quality and reduced downtime High-Pile Delivery: Extended delivery capacity for long production runs and improved productivity WEKO Powder Spray System: Anti-setoff powder spray ensuring clean sheet stacking and high-quality finishing Water-Cooled Press: Complete water-cooled printing press equipped with an external Technotrans chiller for optimum operating temperature, enhanced print stability, and maximum production reliability.