Used Spearhead Twiga 3000 for sale (6,118)

Condition: used, Year of construction: 2004, power capacity 30/37 kW Itjdpsx I Sd Rsfx Affjr volt 380 V ampere 70/78 A

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Itsdpsx I Nbtjfx Affjr Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Itodpfx Afox I A Hvefer Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 6,000 rpm Tool holder SK50 Internal cooling with 36 bar Longitudinal chip conveyor + cross conveyor

Condition: good (used), Three-phase motor, electric motor Itjdpfx Aob A Hktjffer -Power: 1.5 kW -Speed: 3000 rpm -Brake -Shaft: Ø 24 mm -Design: B5 -Protection class: IP 44 -Number: 3x motors available Price: per piece -Weight: 25 kg/piece

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 Iedpfx Afovtm Aysfstr pneumatic hold-down device, pressing device, stop rulers

Condition: ready for operation (used), Year of construction: 2011, Main Drive Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 22 kW Movement X-Axis Movement 260 mm Z-Axis Movement 1010 mm Iedpfx Afjx Imqfjfotr Y-Axis Movement 120 mm Technical Specification Driven Tools yes This 3-axis Okuma LB 3000 EX turn-mill centre was manufactured in 2011. It features a maximum turning diameter of 340 mm, a turning length of 950 mm, and a spindle speed up to 5,000 rpm. The machine includes a 12-position tool turret and supports driven tool speeds up to 6,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma LB 3000 EX machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, tank capacity: 3,000 l, GENERAL Construction type: upright Outer diameter: 1,450 mm Inner diameter: 1,400 mm Explosion proof: Motor is explosion proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,750 mm Heating/Cooling: available Power: 2.2 kW Agitator: anchor agitator Base type: feet Location: Bremen Cylinder temperature control: double jacket Volume: 3,000 liters Double jacket material: steel Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,650 mm Previous use: chemical industry TANK Number of feet: 3 pcs Itsdpfx Asxqbqcjffor HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / Dome: on top cover Outlet: 140 mm MATERIAL SPECIFICATION Flange material: steel Foot material: steel AGITATOR 1 Voltage: 380 volts Bottom bearing:

Condition: used, functionality: fully functional, Screen Printing Table Type: Siri-Drucktisch 3000 Plus Manufacturer: Bochonow Technical Data Make: Bochonow Type: Siri-Drucktisch 3000 Plus Model: 70/100 Table support surface: 1250 x 990 mm Max. print format: 700 x 100 mm Printable material height: 0-35 mm Max. screen size: 960 x 1300 mm Power supply: 400V, 50/60 Hz, 3-phase AC Overall dimensions: W 1500 x D 1300 x H 1000 mm Weight: 150 kg All information is provided without guarantee. A demonstration can be arranged at any time in our showroom. Itjdpex Idhuofx Affor

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Itedpsx I A Hiofx Affer Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 4,000 rpm Tool holder SK50 Internal coolant supply with 22 bar Longitudinal chip conveyor

Condition: used, functionality: fully functional, Panel saw sliding carriage 3000 mm scorer Iodpfx Aow U T D Rjffotr tilting saw blade

Condition: ready for operation (used), Fanuc A06B-0751-B190#3000 AC Spindle Motor, hole spacing of the mounting holes: 102 x 102 mm, Ø drive shaft: 28 mm, used, good condition, 100% functional Iedpfx Aoi D H I Usffstr

Condition: used, available at short notice Iodox H Svwjpfx Affetr

Condition: used, tank capacity: 3,000 l, GENERAL Isdpfx Afsxqbp Esfotr Design: vertical Remarks: external steel parts sandblasted and primed; top cover also heatable/coolable External diameter: 1,450 mm Internal diameter: 1,400 mm Explosion protection: motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be checked) Total height: 4,300 mm Heating/Cooling: available Power: 2.2 kW Agitator: anchor agitator Mounting type: feet Cylinder temperature control: double jacket Volume: 3,000 litres Double jacket material: steel Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,650 mm Last area of use: chemical industry TANK No. of feet: 3 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / Inspection port: on top cover Note: light product residues Outlet: 135 mm MATERIAL SPECIFICATION Feet material: steel AGITATOR 1 Voltage: 220/380 volts Agitator position: centered in top cover

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel electrically heated 72 kW heating capacity 75 kW total connected power net frying length : ± 3.000 mm net belt width : ± 500 mm Itodpfx Aex H Siweffor in- and outfeed belt teflon infeed belt adjustable speed sediment removal system filter suitable for fire protection mechanical hoists dimensions (l x w x h) : ± 6.300 x 1.700 x 3.100 mm

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Iedpfsxnlavsx Affjtr

Condition: good (used), Year of construction: 1998, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg Iedpsphun Esfx Affotr

Condition: ready for operation (used), Fanuc A06B-0758-B3000 #3000 AC Spindle Motor SN: C98300018, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itodpfx Afour Dapsfor

Condition: good (used), Year of construction: 1995, operating hours: 43,499 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, 5-Axis Gantry Milling Machine WALDRICH Product manufactured on the machine: AIRBUS LANDING GEAR (aerospace) Year of construction: 1995; Delivery year: 1998 Installation & Commissioning: 1999 Operating period: 03/1999 to 07/2022 (21 years) Condition: Very Good Customer Specifications / History Previous owner (1999–2022): German aerospace group Technical Specifications Itjdpfxsx Hxdze Affjr Travel Distances & Working Area X-axis (longitudinal table travel): 4,000 mm Y-axis (cross-slide traverse): 2,500 mm Z-axis (vertical ram travel): 1,000 mm Clearance between columns: 2,000 mm C-axis: 360,000 positions (increment 0.001°) B-axis: 360,000 positions Tables & Pallets Number of tables: 2 Table dimensions: 1,500 x 3,000 mm Table height above floor: 740 mm Max. table load: 12,000 kg Feed & Rapid Traverses X/Y/Z: Feed 0–6,000 mm/min, rapid traverse 15,000 mm/min B-axis nutator: 0–3,600 deg/min C-axis nutator: 0–3,600 deg/min Feed Forces / Torque X/Y/Z max.: 30 kN each C-axis detachable torque: max. 20,000 Nm C-axis bearing control: max. 4,000 Nm Speed range Stage I: 20–875 rpm Stage II: 876–4,000 rpm Spindle Drive Power: 50 kW Speed range: 20–4,000 rpm Tool Change System Type: Chain magazine Capacity: 120 tools Tool holder: ISO 50 Max. tool diameter: 315 mm Tool diameter at full occupancy: 100 mm Max. tool length: 550 mm Max. tool weight per gripper: 35 kg Spindle Units / Distances Vertical spindle unit: Spindle nose – table surface 250–1,250 mm Horizontal spindle unit: Spindle center – table surface 150–1,150 mm Nutator (MC303): Spindle center – table surface 45–1,045 mm Coolant & Lubrication Coolant supply: internal and external available Lubrication: automatic (spindle bearings and gearbox) Dimensions & Weight Machine dimensions (approx.): Length: 14,700 mm Width: 10,000 mm Height above floor: 6,079 mm Total machine weight (approx.): 72,500 kg Machine bed: 8,500 kg Machine table & pallet: 16,000 kg 2 columns: 10,200 kg Crossbeam with platform: 20,000 kg Special Features & Accessories Fully automatic tool changer (ATC): 120 stations (ISO 50) Fully automatic head changer incl. universal milling heads Milling head: C-axis: 360,000 x 0.001° B-axis: 360,000° Accessories: 3 chip conveyors Toolbox + pallets with loose accessories Packing List (Transport Dimensions) Axes: 8,950 x 1,700 x H 1,000 mm 2 tables: 3,300 x 1,700 x H 340 mm Tool changer with carriage: 3,500 x 2,300 x H 2,670 mm Tool changer without carriage: 4,450 x 1,060 x H 1,870 mm Pick-up heads: 3,000 x 470 x H 2,200 mm Crossbeam: 7,000 x 2,000 x H 2,500 mm 2 support columns: 2,900 x 1,000 x H 1,500 mm Carriage with RAM: 3,450 x 1,800 x H 2,100 mm Chain section: 3,700 x 2,000 x H 1,100 mm Electrical cabinet No. 1: 5,400 x 600 x H 2,000 mm Electrical cabinet No. 2: 2,100 x 650 x H 2,000 mm Chip conveyor: 5,000 x 500 x H 2,300 mm Head: 900 x 600 x H 700 mm Tool case: 2,100 x 1,200 x H 600 mm 7 pallets with loose accessories This WALDRICH SIEGEN 5-axis portal milling machine is ideally suited for machining steel, cast iron and non-ferrous metals. The combination of a 50 kW spindle drive, automatic tool changer (120 stations), fully automatic head changer, and high-precision B/C axis positioning (0.001°) makes it the ideal solution for demanding and complex manufacturing tasks.

Condition: good (used), Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm Iodpfxob A Hnho Affjtr -with extraction

Condition: ready for operation (used), Fanuc 20S / 3000 A06B-0318-B032 # 7000 AC servo motor SN: C90XAA2918, used, good condition, 100% functional, scope of delivery as per photos Itsdpfx Afougyy Hefjr

Condition: good (used), Three-phase motor, electric motor Ijdpfx Ajb A R Efeffetr -Power: 0.1 kW -Speed: 3000 rpm -Shaft: Ø 8 mm -Design: B3 -Protection class: IP 44 -Dimensions: 230/160/H110 mm -Weight: 3.3 kg

Condition: ready for operation (used), Fanuc 30S / 3000 A06B-0319-B232 AC servo motor SN: C906A3927,used, good condition, 100% functional, scope of delivery as per photos Itodpfxeugyy To Affsr

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system -Manufacturer: Migatronic, MIG/MAG welding machine -Type: FLEX 3000 C Ijdpfx Asx Hwlkoffstr -Max. welding power: 300 A -Air-cooled -Wire feed: 4-roll drive -Accessories: incl. ground cable, gas valve, hose assembly (see photos) -Dimensions: 920/450/H1065 mm -Weight: 70 kg

Condition: ready for operation (used), Fanuc A06B-0032-B575 B2/3000 AC servo motor, serial no. according to photo, used, good condition, 100% functional, scope of supply according to photos Iodji D Hvxjpfx Affjtr

Condition: ready for operation (used), HR-Heligaron T image intensifier CXI-3000 Series & CXI-5600.532-1.024 FOV + CV-M4+CL camera, used, minor signs of use, 100% functional, scope of delivery as per photos Itsdpfx Afol Ecimsfsr