Used Sparkling Wine for sale (214)

Condition: used, operating hours: 24,000 h, Used Bottling Line for Sale Bertolaso 7000 BPH – 1999 for still and sparkling wine. The bottling Line for Sale as a whole, considering every component, is very well maintained. Clean and without obvious or compromising signs of wear. The sparkling wine bottling line reaches an hourly speed of about 3000 BPH on the 0.75 formats. Depalletizer: The line starts with the Acmi automatic depalletizer model Rasar P130; with an electric roller pallet storage that manages the pallets automatically with two pallets waiting. The maximum height of the workable pallet can reach about 2 meters. The standard pallet size is 800 × 1200 with a height of 140 cm. Automatic inter-layer remover with compressed air rotating arm. It has a parachute safety system that prevents the head from going down in case there is an operator. It is also equipped with a perimeter barrier that blocks the machine in case the doors are opened. Filling Isobaric Monoblock of Bertolaso Bottling Line for Sale: The Bertolaso ​​Sincronia 1400 filling monoblock starts with a 28-valve internal bottle rinsing machine followed by an isobaric filler with 36 taps and ends with a 6-head mushroom cork corker, or a 4-head screw cap. It has a machine pitch of about 30 cm to allow the processing of multiple formats of different sizes. The direction is clockwise. Safeguards are all present as also machine manuals. This line’s bottled product is wine and sparkling wine in sizes from 0.375 to 1.5 L.  It performs isobaric filling with mobile nozzles and traditional valves. It generates a vacuum before capping. The type of cap used is cork (straight or mushroom) or silicone with 6 heads; while aluminium and Stelvin caps with 4 heads. The size of the corker ranges from a minimum of 44 × 23.5 to 48 × 30.5 mm. Inspector: It is a 2011 model that is able to check the level and the cap, the internal product and any residues inside the empty bottle. Fully electronic with laser sensors, it can work at a speed of 7000 BPH and over. Washer-dryer: It’s a Cames from 2000 with a spray washing system that rinses the bottle externally, brushes it and then passes it under the hot air hair dryers that immediately dry the bottle preparing the surface for labelling.  Pgjdpsvguu Djfx Ahvoi Wirehooder and Capsule: Next in line is a Spumante Wirehooder of the brand Nortan Minerva 60, an accumulation space for the bottles followed by a Nortan capper. It is also suitable for sparkling wines with centring, with a maximum height of the processed bottle ranging from 15 to 35 cm. Overall mass 3000 kg; Consumption: 380 v, 15 kW, 50 Hz Labelling machine: Bertolaso Bottling Line for Sale has a Krones labeller from the year 2000 with a bottle lock at the entrance. It has 8 plates with a machine pitch of about 30 cm. It has a manual head and glue film adjustment, mechanical centring system and outgoing label smoothing.

Condition: used, Year of construction: 2016, Used capsuling machine Robino & Galandrino for champagne bottles up to 000 bph The machine Robino & Galandrino ZENITH for champagne bottles up to 000 bph delivers high-precision capsuling for specific applications in the bottling sector of sparkling wines and champagne. Moreover, Robino & Galandrino manufactured the ZENITH Z 3-36 OTTICO model in 2016, incorporating advanced technology to achieve optimal capsuling results. Technical Specifications of the Capsuling machine Robino & Galandrino ZENITH Production speed: This capsuling machine processes up to ,000 bottles per hour (bph) with single capsule centering. Additionally, it reduces the speed to 9,000 bph in double centering mode, which aligns both the bottle and the capsule optically. Containers: This machine specifically accommodates glass bottles, thereby fulfilling the requirements of champagne and sparkling wine producers. Capsuling heads: The machine features application heads, which distribute capsules uniformly and precisely, even at high speeds. Capsule type: The system supports capsules for champagne and sparkling wines, thus ensuring a perfect fit on the bottle neck. Distinctive Features Optical centering system: The advanced optical centering system delivers millimetric precision during capsule application. Consequently, this capability is particularly critical for achieving high aesthetic and functional standards. Counterclockwise rotation: The machine rotates counterclockwise, which enables seamless integration with pre-existing production lines. Extended capsule stock: The extended stock capacity significantly increases operational autonomy and minimizes downtime for capsule loading. Optimized production: The ZENITH Z 3-36 OTTICO model maximizes productivity while maintaining consistent quality through its flexible configuration for various operating modes. Safety and Electrical Supply This machine adheres to strict safety standards, thereby creating a safe working environment for operators. Furthermore, it operates with a 400 V power supply, 50 Hz frequency, and 18 A current draw, ensuring stable performance and compatibility with standard industrial installations. Current Condition of the Capsuling machine Robino & Galandrino ZENITH The machine remains in storage. Its modular design, as a result, simplifies adaptation to different operational needs. Ideal Applications This Capsuling machine Robino & Galandrino ZENITH suits producers who require high production volumes and flawless capsuling quality. Moreover, its versatility allows usage in both new production lines and existing plants, ensuring compatibility and superior performance. Pjdpfxevu A Ete Ahvsgi Choosing the Used capsuling machine Robino & Galandrino for champagne bottles up to 000 bph guarantees access to a reliable, high-performance machine equipped with advanced optical centering technology. Thus, it represents an essential asset for high-demand production environments.

Condition: used, Year of construction: 1993, Used Filling Machine Cobert Olimpia 1993 The Cobert Olimpia 16 is a used filling machine manufactured by Cobert in 1993. This versatile machine is designed to efficiently fill containers, particularly glass bottles, with various products such as alcohol, sparkling wine, and still wine. With its reliable performance and adaptable features, it has gained popularity in the industry. Key Features and Specifications The Olimpia 16 model features 16 filling nozzles, allowing for simultaneous filling of multiple bottles. It operates using a slight vacuum in the bell, ensuring precise and controlled filling. The machine incorporates a variable-height bell, accommodating different bottle sizes. One of the notable features of the Olimpia 16 is the rack-and-pinion mechanism for adjusting the filling levels on the nozzles. This feature enables fine-tuning and consistency in the filling process. The bottle lifting pistons utilize mechanical spring mechanisms, ensuring efficient and reliable bottle positioning. The entire machine’s base is enclosed in stainless steel, providing a protective casing. This protective enclosure enhances durability and facilitates easy cleaning and maintenance. The inclusion of safety protections ensures a safe working environment for operators. Efficient Filling Process with Adjustable Settings The Olimpia 16 offers a variable production speed, allowing for flexibility in meeting production demands. With a production capacity of approximately 3,000 bottles per hour (BPH), this machine is suitable for medium to high-volume production lines. The clockwise rotation of the machine facilitates a smooth and efficient filling process. The adjustable filling levels on the nozzles, controlled by the rack-and-pinion mechanism, ensure precise and consistent fill volumes. This feature is particularly beneficial when working with different product viscosities or container sizes, guaranteeing accurate and reliable filling results. Enhanced Safety and Durability Safety is a priority in industrial environments, and the Olimpia 16 addresses this concern with its built-in safety protections. These measures minimize the risk of accidents or injuries during operation, ensuring the well-being of operators. Pgedpfx Ahjvgugmsvei The stainless steel casing provides robustness and durability to the machine, safeguarding its internal components. This construction material also enables easy cleaning, contributing to the overall maintenance and longevity of the equipment. Suitable for Various Products and Container Formats The Cobert Olimpia 16 is a versatile filling machine that caters to a range of products and container formats. It is well-suited for filling glass bottles, particularly in the 0.75 L format. This flexibility makes it an ideal choice for filling different beverages, including alcohol, sparkling wine, and still wine. The machine’s adaptability to different product types and container formats makes it a valuable asset for businesses in the beverage industry.

Condition: used, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Pgedpfx Ahsvxz Aljvji Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Isobaric Filling Machine Cobert SUPREMA (1985) The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles.

Condition: used, Used Rinsing Machine Poggio for glass bottles 6000 bph Structural features of the used rinsing machine Poggio The Used Rinsing Machine Poggio for glass bottles 6000 bph operates with 24 grippers specifically designed to process 0.75-liter glass bottles. First of all, the machine follows a clockwise rotation and performs a single rinsing phase. Additionally, the rotating support interfaces directly with the grippers, which securely hold each bottle to ensure accurate positioning and tilting. As a result, the system optimizes the efficiency of the rinsing cycle. Moreover, engineers built the stainless steel frame to endure intensive production environments, while protective enclosures enhance safety in humid bottling areas. Pgedpfjwcfz Sex Ahvei Treatment system and operating principles The machine performs a single rinsing cycle using only water, without relying on any chemical agents. Notably, the Used Rinsing Machine Poggio for glass bottles 6000 bph integrates a no bottle no spray system, which activates the spray only when it detects the presence of a bottle. In contrast, it disables the spray if no container is in position. Consequently, the machine avoids wasting water and conserves energy used for pumping. Furthermore, this feature—technically referred to as spray activation conditioned by bottle presence—protects the spray nozzles from premature wear. In fact, the control system operates through sensors or mechanical cams that allow spraying exclusively when the gripper locks the bottle in place. Therefore, the rinsing process remains efficient and sustainable throughout operation. Bottle format compatibility The Used Rinsing Machine Poggio for glass bottles 6000 bph supports two standard bottle formats: Bordeaux and Champagne. To clarify, the machine includes adjustable centering systems and interchangeable adapters to maintain bottle stability during tilting and rinsing. In addition, the design of the infeed star and bottle guides allows operators to change formats quickly. As a result, the machine maintains production continuity and minimizes downtime. Hence, manufacturers can easily integrate it into existing lines that require flexibility. Furthermore, its high positioning accuracy ensures smooth operation even in high-speed automated systems. Performance and production capacity This machine consistently delivers a nominal output of 6,000 bottles per hour. Thanks to its 24 grippers, the machine supports continuous operation while respecting the necessary rinsing time per unit. While variables such as water pressure, line stability, and feeding regularity may influence actual performance, the machine typically operates within standard tolerances. In other words, it remains reliable for medium-capacity bottling lines. Additionally, operators can optimize settings based on specific production requirements without compromising throughput. Industrial applications and usage contexts of the Used Rinsing Machine Poggio Industries in the wine and sparkling wine sectors commonly adopt the Used Rinsing Machine Poggio for glass bottles 6000 bph.

Condition: used, operating hours: 1,800 h, Used Bottling Line for champagne, sparkling and still wine 4000 bph Pgedowgw Dgepfx Ahvoi Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,000 bottles per hour. Therefore, this production speed suits medium-scale wineries that require flexibility while maintaining industrial performance. Commissioning, Runtime, and Immediate Availability Technicians installed the line in 2022. Since that time, it has operated for 1,800 hours and produced approximately 2,400,000 bottles. The system continues to run in production, which means it remains in good operational condition. Furthermore, its immediate availability offers an advantage to wineries needing rapid deployment. Because of this, buyers can integrate the equipment without significant downtime. Primary Bottling Block: Depalletizing, Rinsing, Filling, and Capping The process starts with a Duetti Packaging depalletizer, model M, which automatically feeds empty bottles into the system. Subsequently, the GAI monoblock, model 4033RES-HP-A01, performs rinsing, filling, and capping in a single integrated unit. The dual-stage rinser (water + gas) uses 16 grippers to sanitize bottles. A high-pressure electropneumatic filler with 24 valves carries out isobaric filling. Notably, the 3-head rotary corker applies straight corks, champagne-style mushroom corks, plastic closures, and aluminum screw caps. Moreover, the monoblock includes multi-format screws, motorized guide adjustments, dummy bottles for internal rinser sterilization, and a solenoid valve kit to switch between gas and cleaning liquid inputs. Altogether, this configuration provides high precision, minimal changeover time, and excellent bottle handling. CIP and Quality Control: Cleaning and Inspection Systems To maintain hygiene, the WIN&TECH CIP unit, model Win&Guard C 23.05, manages automatic cleaning via a steam-water heat exchanger and a three-stage filtration system across two independent circuits. Additionally, this system allows operators to sanitize the internal components between production runs without disassembly. At the same time, the CMP inspection unit, model CV-MUF108, performs continuous quality control.

Condition: used, Year of construction: 2007, Used Filling Monoblock Cimec America The Used Filling Monoblock Cimec America model DPS 6/6/1C is an advanced isobaric bottling solution designed for the precise rinsing, filling, and capping of carbonated beverages. Engineered with industrial-grade stainless steel and based on a robust mechanical architecture, this monoblock is tailored for small to medium-sized beverage operations seeking reliability, hygiene, and consistent process control. This CIMEC monoblock integrates three essential stations into a compact, fully automatic system. The configuration includes a bottle rinsing unit, an isobaric filling carousel, and a crown capping station, all enclosed within stainless steel safety guards with transparent access doors for operational monitoring and safety compliance. Isobaric Filling Technology and Construction At the heart of the Used Filling Monoblock Cimec America is its isobaric filling carousel, specifically engineered for carbonated liquids such as beer, sparkling wine, kombucha, cider, and similar beverages requiring careful handling to preserve carbonation and minimize product loss. The filling station features stainless steel isobaric valves connected to a pressurized product tank, ensuring precise equalization between the internal bottle pressure and the product tank before the filling cycle begins. The isobaric filling method is characterized by maintaining a constant counter-pressure using CO₂ or other inert gases. This technology allows the product to enter the bottle under pressure, minimizing the formation of foam and the risk of de-gassing, which is critical for carbonated drinks. Filling is performed at a controlled rate, typically using a “level” principle where the filling valve shuts off when the liquid reaches a predefined height within the bottle, guided by dedicated overflow tubes. All product-contact surfaces are manufactured from high-quality AISI 304 stainless steel, ensuring full compliance with sanitary standards required in the food and beverage industry. The filling station is equipped with pressure gauges and safety valves, allowing for fine-tuned process adjustments and safeguarding both the operator and the product. The system accepts a range of bottle sizes from 0.22 liters up to 1.5 liters, providing operational flexibility for various production formats. Changeover between bottle sizes is managed manually, with adjustable guides and supports. The monoblock is configured for crown cap application (26 mm diameter), using a dedicated capping turret with mechanical sorting and feeding of the crowns. The design enables precise and secure sealing, vital for maintaining carbonation and product integrity. Automation, Utility Requirements, and Operational Safety Pjdpfxow Hr Awj Ahvsgi This Used Filling Monoblock Cimec America operates as a fully automated rotary triblock, requiring minimal manual intervention during normal production cycles. Mechanical synchronization ensures seamless bottle transfer between stations, supported by motor-driven conveyors and rotary starwheels for accurate positioning throughout rinsing, filling, and capping.

Condition: used, Used Filling Line for Sparkling Wine PROCOMAC Up to 6000 BPH Condition and Capacity Firstly, the filling line reaches up to 6000 bottles per hour (BPH), standing as an efficient solution for companies aiming to optimize their bottling processes. Currently stored, moreover, this line offers versatility in handling different glass container formats, specifically 0.375 L, 0.75 L, and 1.5 L, for both sparkling and still wines. Additionally, the isobaric filling technology ensures product integrity throughout the process. Key Components of the Used filling line for sparkling wine PROCOMAC up to 9000 bph The system comprises several key machines. Initially, the TMG depalletizer, model VEGA 60 from 2004, handles empty bottles. Following this, the Procomac filling monoblock, model 56 8 8 141 from 2004, integrates filling stages into a compact solution. Furthermore, the Bertolaso capping machine, model EMN 550/350 from 1995, ensures each bottle is sealed correctly. Cleaning and Maintenance Essential for maintaining quality and hygiene, moreover, the Procomac CIP (Cleaning-In-Place) system, model 92.003.657 from 2004, allows for effective and automated cleaning of the equipment without disassembly. This aspect is crucial to ensure the longevity and efficiency of the filling line. Automation and Labeling Moreover, automation plays a key role in the line’s efficiency. Conveyors move bottles from the depalletizer to the exit of the triblock, highlighting the importance of uninterrupted workflow. Subsequently, the Kosme labeling machine, model EXTRA ADHESIVE 720 12T S3 E3 CE from 2006, applies labels accurately, ensuring a consistent and professional brand image on the final product. Packaging Psdpfx Aovgt I Aohvogi Final packaging is managed by TMG machinery: the ORION case erector from 2008 prepares cardboard cases, while the TM90S case sealer from 2004 closes and seals the cases, ready for distribution. These final steps are vital to ensure that the finished product is presented and protected adequately for transport. Performance of the Used filling line for sparkling wine PROCOMAC up to 9000 bph Lastly, the line displays versatility in performance, with a nominal speed of 6,000 BPH for sparkling wine in the 0.75 L format and 9,000 BPH for still wine in the same format. This flexibility demonstrates the adaptability of the used PROCOMAC sparkling wine filling line to different production needs, making it a valuable solution for any winery.

Condition: used, Used overhauled isobaric Filling Machine Cobert Exacta up to 1600 bph Introduction to the Filling Machine Cobert Exacta The Cobert Exacta isobaric filler, with its 16 taps and advanced features, stands out as a cutting-edge solution in the industrial bottling field. Technical Specifications Pgedpfx Aewc Tutjhvsi Equipped with filling taps featuring pre-evacuation and degassing, the Cobert Exacta ensures precise and uniform bottle filling. Additionally, the pneumatic piston system for bottle lifting, integrated with an air recovery mechanism, guarantees efficient and reliable operation. Moreover, the presence of a vacuum pump optimizes the filling process, maintaining high standards of quality for the final product. Furthermore, the external tap washing device contributes to the cleanliness and hygiene of the machine, essential for safe and compliant production. Performance and Functionality The Cobert Exacta offers variable production speed, which is adjustable via a variator, to meet specific production needs. Thanks to the output photocell for controlling overflow on the conveyor belt, the machine ensures continuous operation without interruptions. Furthermore, with a production capacity of approximately 1600 bottles per hour, this filler stands out for its high efficiency and productivity. Notably, it can handle 0.750-liter bottles of sparkling wine refrigerated at around 0 degrees Celsius, ensuring maximum output without compromising product quality. In summary, the Cobert Exacta isobaric filler is an ideal choice for food and beverage companies seeking superior performance and reliability in the bottling process. With its advanced features and robust design, it represents a strategic investment to optimize production and ensure customer satisfaction.

Condition: used, Year of construction: 2015, Used Automatic Rotary Wirehooder Robino & Galandrino Rekord 14000 bph The Used Automatic Rotary Wirehooder Robino & Galandrino Rekord 14000 bph, model Rekord 14000 TC, provides an advanced technical solution for applying and fastening 4-wire cages on bottles of sparkling wine. Moreover, this machine ensures high productivity and precision, making it particularly suitable for high-volume bottling lines. Technical Features The wirehooder features an automated rotary system that handles up to 14,000 bottles per hour (bph). Consequently, this high-speed capability optimizes production lines, maintaining a steady flow of bottles and minimizing downtime. Pedpfevuru Dsx Ahvjgi Robino & Galandrino, a leader in bottling machinery, designed and manufactured this model in 2015, ensuring it delivers reliability and durability for intensive use. Additionally, the rotary system guarantees uniformity and reduces operational inefficiencies. Functional Specifications of the Robino & Galandrino wirehooder The Rekord 14000 TC model operates with 12 application heads, each designed to distribute and fasten 4-wire cages precisely. Furthermore, the system applies the wire cage securely, keeping the cork firmly in place. It also supports bottles of sparkling wine, meeting strict technical and quality requirements. In terms of integration, the machine operates clockwise (left to right), allowing seamless incorporation into most existing bottling lines. For this reason, many producers find it highly adaptable to various production setups. Safety and Condition The machine integrates advanced safety features that protect operators and reduce the likelihood of mechanical failures. As a result, this equipment ensures not only reliability but also peace of mind during operation. The equipment remains in storage, ready for immediate deployment into a production line. Applications The Used Automatic Rotary Wirehooder Robino & Galandrino Rekord 14000 bph meets the demands of sparkling wine and champagne producers who require high-performance equipment. Therefore, its high-speed operation enables wineries or industrial facilities to handle significant bottle volumes efficiently. In particular, its technical capabilities cater to high-demand production environments. Operational Advantages The machine achieves high productivity, processing up to 14,000 bottles per hour. The 12 application heads ensure precise and uniform fastening of wire cages. The clockwise configuration integrates easily into existing production setups. The integrated safety features enhance operator protection and equipment reliability. Bottle diameter from 55 mm to 125 mm Conclusion This Robino & Galandrino wirehooder delivers reliable and high-performance functionality for bottling operations. Moreover, its technical features and precision make it an excellent choice for producers seeking to optimize their bottling lines. Consequently, this machine addresses the need for efficiency, safety, and adaptability. Therefore, it represents a long-term investment for any production facility aiming to enhance its operational output. Ultimately, the Rekord 14000 TC wirehooder proves itself as a top-tier choice in the bottling industry.

Condition: used, Year of construction: 2006, Used Palletizer APSOL CP-G ROBOT 800 boxes/hour The APSOL CP-G ROBOT automatic palletizer provides a highly efficient solution for handling and palletizing boxes, particularly suited for the sparkling wine industry. This model, used until 2023 in a sparkling wine production line, delivers high performance while maintaining the robustness and safety typical of the APSOL brand. Palletizer Capacity and Operation The palletizer operates with a capacity of 800 boxes per hour, which is crucial for production lines that require fast and effective load management. It relies on an advanced robotic system, which enables precise movement on three axes, ensuring smooth and error-free operation. Additionally, the three-axis movement system offers excellent flexibility and greater precision in palletizing operations, minimizing the risk of product damage. Handling System and Box Infeed Pgedpfev Ew Rfjx Ahvoi The pallet infeed uses a motorized roller conveyor, which ensures continuous and uninterrupted movement. Similarly, the outfeed of full pallets is managed by a motorized roller conveyor, which allows quick and efficient pallet unloading. The box infeed system employs single-lane feeding, equipped with a motorized roller conveyor and a separator, optimizing box distribution and handling. Structure and Safety Features of the Used APSOL Palletizer The palletizer’s structure consists of painted steel with stainless steel cladding, ensuring long-lasting resistance and effective protection against corrosion, especially in production environments that require high hygiene and durability standards. Moreover, safety guards protect operators, ensuring their safety, which is essential in any industrial facility. Control Panel and Operation Type The equipment, which features integrated control panels, is easy to manage and offers continuous monitoring of operations. Due to its fixed operation type, the palletizer is ideal for installation in production environments where consistency and stability are essential. Consequently, it has maintained high reliability until 2023, ensuring excellent performance despite regular use. Pallet Size Flexibility and Supported Dimensions The Used Palletizer APSOL CP-G ROBOT 800 boxes/hour supports a variety of pallet sizes. It accommodates standard pallets such as Eur-Epal 800×1200 mm, and also specific sizes like Cp1 (1000×1200 mm), Cp2 (800×1200 mm), and Cp3 (1140×1140 mm). It can also handle pallets of varying sizes, such as Cp4 (1100×1300 mm), Cp5 (760×1140 mm), and larger formats like Cp7 (1300×1100 mm) and Cp8 (1140×1140 mm). The flexibility in supported sizes makes this palletizer versatile and suitable for various operational needs. Condition and Availability of the Used APSOL Palletizer The palletizer is currently in storage, ready for installation or adaptation to new production lines. Additionally, all safety features and manuals are available for proper installation and maintenance, ensuring that the equipment complies with safety regulations.

Condition: used, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 3500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 3,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. Pjdpfxow Imp Hj Ahvsgi The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is electrically integrated into the line and can be configured for multiple label types, including adhesive and cold-glue systems.

Condition: used, Option to purchase individual machines separately! Used KRONES carbonated beverage bottling line – capacity: approx. 7,000 bottles/hour • Bottle formats: 330, 500, 700, 750, 900, 1000 ml • The line has been used for cider, sparkling wine, and champagne. • Option for filling beer in returnable/non-returnable bottles. • Possibility to inspect and run the line before purchase. Available immediately. The line consists of: 1. Bottle depalletizer for returnable bottles Kettner 1989 (Kontipack E) 2. KRONES bottle washer for returnable bottles, 1988, Type 150/10-110 3. KRONES bottle capper 4. ADELSKI PP2010 bottle screw-capper, 2007 (Adelski) 5. Manual cork capping press 6. Wirehood application machine (Nortan, Minerva 80-120, 1995) 7. Foil capsule applicator (Nortan, Prisma 80:s, 1994) 8. Labeller + tax strip applicator (Krones Taxomatic, KES-5, 1995) 9. Pressure-sensitive labeler (Krones, Prontomatic, 1994 – for both self-adhesive and glue-on tax strip labels) 10. Bottle dryer KRONES K745-D07, 2005 11. Packman Palletizer (60ASS30, 2002) 12. PABLO stretch wrapper, PL, OW-2 – O-C, 2017 13. Pasteurizer 14. MIXER – Krones 1989 Pedpfx Ajqi Aw Nohvjgi 15. Pasteurizer 16. Crate loader for 12-bottle cases 17. Conveyors 18. Control cabinets 19. Documentation

Condition: used, Year of construction: 2002, Overview This ENOS Millenium self-adhesive labelling machine was manufactured in 2002 and is designed for the application of pressure-sensitive labels on glass bottles, particularly in wine production environments. The machine is equipped with three labelling stations, allowing the application of front, back, and seal labels. With a capacity of approximately 2,500 bottles per hour, the system is suitable for small to medium-sized production lines. The machine supports Bordeaux and Burgundy bottle formats, with corresponding format parts included. Its modular design and self-adhesive technology provide flexibility for different label applications and bottle types. Technical Data Capacity: approx. 2,500 bottles per hour Labelling technology: Pressure-sensitive (self-adhesive) Number of stations: 3 Applications Front label Back label Seal label Bottle Formats Container type: Glass bottles Supported formats: Bordeaux Burgundy Format parts: Included for both bottle types Pedpeyxxxcofx Ahvjgi

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 03/2026, fuel type: diesel, overall weight: 3,225 kg, color: grey, gearing type: automatic, number of seats: 5, total length: 5,450 mm, total width: 2,275 mm, total height: 1,964 mm, loading space length: 2,004 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 17525 Errors and prior sale reserved! ---- SPECIAL EQUIPMENT * Electrical preparation kit for trailer coupling (wiring harness and trailer module) * Heated steering wheel with Sensico leather-look * Seat Package 12: Driver’s seat manually adjustable in 4 directions – front passenger seat individually adjustable in 4 directions – seat heating for driver and passenger – inner armrest – lumbar support for driver and passenger – side airbags, left and right – front head-shoulder airbags, left and right – Barlo Style fabric upholstery in Black Onyx, seat back and side bolsters in fabric in Euro New Onyx * Socket: 12-volt connection in loading/passenger compartment * Technology Package 6: Exterior mirrors electrically adjustable, heated and power-folding – audio system with 13-inch multifunction display, Ford SYNC 4 incl. navigation – Blind Spot Assist incl. Cross Traffic Alert reverse emergency braking assist – Pre-Collision Assist, camera- and radar-based – Driver Drowsiness Detection – Lane Keeping and Lane Change Assist – Lane Centering Pilot – Traffic Sign Recognition – Wrong-way Alert – Park Pilot System front/rear – Adaptive Cruise Control incl. Stop&Go – Intelligent Speed Limiter with speed limit display – 360-degree camera – Steering wheel, Sensico leather-look FURTHER EQUIPMENT * Two-stage unlocking for passenger and cargo compartment * Passenger airbag * Driver airbag * All-wheel drive * Anti-lock braking system with electronic brake-force distribution * Battery: H7 AGM single battery * On-board computer with fuel consumption and mileage data (e.g., remaining range) and outside temperature display * Roof console * Double-wing rear doors with door hinges (no windows) – 90 degrees – unlockable up to 168 degrees * ESP – Hill Start Assist – Emergency Brake Assist – Traction Control * Vehicle modem – 5G WiFi hotspot modem – Information on current vehicle status or location, as well as control of selected vehicle functions via smartphone with the Ford app – Real-time traffic information (when paired with navigation system) – WiFi hotspot (up to 5G/LTE, for up to 10 mobile devices) * Windows: Side windows, 2nd row, fixed, right and left * Electric front windows – with quick up/down feature for driver and passenger * Electric parking brake * Ford Key Free System – incl. Ford Power Start function * FordPass Connect – incl. live traffic information and 5G WiFi hotspot modem * Heated windscreen * Grab handles, driver and passenger side * Lockable glove compartment with lid * Interior lighting in passenger compartment * Front interior lighting * Front automatic climate control – with recirculation heating – with R-1234yf refrigerant * LED headlights – LED high beam – LED low beam – LED daytime running lights incl. integrated LED indicators at the front – static cornering light – High Beam Assist * Cargo area lighting (LED) – extra bright * Load compartment floor: "Easy Clean" vinyl flooring Podpfx Ahsyxix Hevjgi * Small center console * Driver drowsiness detection * Emergency call assistant eCall emergency system * Particulate filter: Diesel particulate filter * Radio accessories: 4 speakers * Tire repair kit * Tire pressure monitoring system * Wheels: Alloy wheels 6.5 J x 16 – with 215/65 R 16C 109 T BSW tires – in Sparkle Silver * Gear lever on the steering column * Wipers with rain sensor * Sliding door, right * Front and rear mud flaps * Half-height side wall cladding * Power steering * Safety belts – seat belt pretensioners and force limit

Condition: used, Year of construction: 2009, operating hours: 20,000 h, machine/vehicle number: FA47, Used shrink wrapper SMI SK 450FTechnical Specifications & Performance DataThe SMI SK 450F is a second hand shrink wrapper engineered for high-speed industrial packaging in beverage production and related sectors. This model is well suited to operate downstream of rinsing, filling, capping, and labeling blocks within a used bottling line, delivering stable, brandable bundles for transport and retail.Manufacturer / Model: SMI SK 450FYear: 2009Category: Shrink Wrapper (film application with shrink tunnel)Production speed: up to 28,000 bottles/hour (format dependent)Bundling rate: up to 45 bundles/minute (collation dependent)Operating type: Automatic, continuous-duty shrink wrappingInfeed configuration: Straight inline entry for high-speed linesFilm handling: Works with printed film (print-mark registration) and neutral filmPackaging styles: Film-only and tray+film configurations (subject to setup)Typical collations: 4×3 0.33 L, 3×2 0.33 L, 4×3 0.50 L, 3×2 1.5 L, 2×2 1.5 L, 3×2 1.5 L, 3×2 2.0 L, 2×2 2.0 LContainer materials: PET and glass bottles, aluminum cansProduct types: Water, juice, beer, wine, carbonated soft drinks, energy drinks, and moreTechnical measurements: Dimensions/weights available in manualsAdvanced Automation & Control SystemsDesigned for demanding beverage production, the SK 450F provides robust automation to maintain output and pack quality at speed.Operator-friendly HMI for recipe selection, format parameters, and diagnosticsAutomatic film unwinding with tension control for stable wrapping of PET, glass, and cansPrint-mark sensor for precise registration when running printed filmShrink tunnel with zoned temperature control for consistent, wrinkle-free bundlesIntegrated safety interlocks, emergency stops, and safety guards includedElectrical specifications and wiring diagrams available in the manualsProduction Line Integration CapabilitiesThis shrink wrapper integrates seamlessly into a used bottling line alongside upstream rinsing, filling, capping, and labeling systems, and downstream conveying, case handling, and palletizing.Inline interface with conveyors, accumulation tables, and inspection systemsQuick format change with recipe-based adjustments for varied collationsCompatible with multi-product schedules across water, juice, beer, wine, and mixed SKUsSynchronization options for line speed following and start/stop handshakesMachine Condition & Maintenance HistoryCondition: IN STORAGE, second hand unit from 2009Safety features included as part of the delivered scopeManuals available for operation, maintenance, and electrical referencesGener... Podpfx Ahjyhbzwjvogi

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Pgodpsvlnvrefx Ahvoi

Condition: used, Year of construction: 2015, GAI MONOBLOCK Model: 10006W-002 Year: 2015 Podpjywyx Ijfx Ahvsgi Speed: 1200 bph Clockwise For glass bottle Product: wine 6-clamp fixed-nozzle bottle rinser Water treatment system Deaeration and gas injection station 6-valve light vacuum filler Single-head straight corker Single-head aluminum screw capper 30×60 Distribution system: pick-up on the fly Safety protections

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Psdpjw D E Ubsfx Ahvegi Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Operational Performance & Versatil...

Condition: used, Year of construction: 2013, machine/vehicle number: TP118, Technical Specifications & Performance Data The Used Enolmeccanica Vallebelbo SRL Sirio 4-T is a four-head capping machine engineered for reliable application of 30x60 aluminum screw caps (Stelvin-type) on still wine bottles. Purpose-built for glass containers and optimized for 0.75 L formats, it is an efficient choice for beverage production environments and industrial packaging operations seeking dependable capping performance within a used bottling line. Manufacturer: Enolmeccanica Vallebelbo SRL Model: Sirio 4-T Year of manufacture: 2013 Machine category: Capping machine for glass wine bottles No. of heads: 4 Throughput: up to 4,000 bottles/hour (format and line-dependent) Cap type/size: Aluminum screw cap, 30x60 (Stelvin-type) Bottle format: 0.75 L Container types: Glass (integration-friendly with lines handling PET, glass, or aluminum containers) Product types: Still wine Condition: READY FOR OPERATION (second hand) Documentation: Manuals available Safety: Safety features included Advanced Automation & Control Systems Designed for consistent torque and repeatability, the Sirio 4-T applies aluminum screw closures with stable, repeatable force to protect product integrity and bottle aesthetics. The machine is built to interface with standard PLC/HMI architectures typically found in beverage production, allowing straightforward monitoring of speeds, alarms, and interlocks. Sensors for bottle presence and cap presence can be integrated to reduce misfeeds and stoppages, while the closure handling system supports smooth cap pick-up and application at rated speeds. Operator-friendly controls and access points help streamline setup, changeover, and routine checks, supporting safe and efficient operation in industrial packaging environments. Production Line Integration Capabilities Pgsdpfxox H Taqo Ahvoi This capping machine integrates cleanly into existing or new used bottling line layouts. It pairs seamlessly with upstream rinsing and filling equipment and downstream labeling, inspection, and case packing systems. The Sirio 4-T supports inline operation on standard conveyor heights and can be configured for standalone use where required. While optimized for 0.75 L glass wine bottles, the platform accommodates format adjustments via appropriate change parts. It is well-suited to wineries and premium beverage producers looking to standardize capping performance while maintaining flexibility across SKUs. In mixed lines that may process water, juice, or beer in PET, glass, or aluminum containers, the Sirio 4-T serves as the dedicated station for still wine glass formats. Machine Condition & Maintenance History Year 2013 and second hand, this unit is READY FOR OPERATION and suitable for rapid deployment into beverage production. The machine includes safety features and manuals to support installation, training, and long-term use. Routine maintenance points are accessible, and service procedures align with common practices for capping, filling, and labeling equipment in modern bottling plants. Operational Performance & Versa...

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: AC, input voltage: 400 V, year of last overhaul: 2025, input frequency: 50 Hz, Equipment: documentation/manual, Manufactured by Eurostar Italy - one of the leading filling manufacturers Designed for filling Apple Cider, Beer, CSD and still drinks Triblock -rinser - filler - capper 2,000 BPH at 500ml bottles 3,000 BPH at 330ml bottles Isobaric Counterpressure Filling, designed for cider, beer, and other still & sparkling beverages Double Pre-Evacuation with Vacuum Pump, ensuring minimal oxygen pickup for superior product quality 316 Stainless Steel contact parts for superior hygiene and durability Pneumatic Bottle Lifters - overhauled 2025 Twin-channel rinser with final blow-off - overhauled 2025 Crown Cap (26mm caps) Capper Bypass - to feed to other cappers Touch Screen Control Panel for easy operation and monitoring Siemens PLC System, providing precise process automation and flexibility Variable speed control via inverter drive Pgjdpfxjx A U Urs Ahvsi CIP Cups, Cleaning fluid can be recycled Change Parts Included for 250ml, 330ml, 500ml, and 750ml glass bottles Heavy-duty stainless steel frame CE-compliant safety Includes all manuals Spare Parts package Spare Fill tubes - new for adaptation to any bottle fill height Spare filling valve seals etc. Can be loaded to buyer's transport

Condition: used, Year of construction: 2000, Packing machine for containers such as bottles (beer, wine, beverages, oils) or cans into cardboard group packaging. The containers are grouped, then wrapped with a cardboard blank and glued into a group package. Pedpfeywclwox Ahvogi Manufacturer: SOTEMAPACK Model: WRAP-AROUND Year of manufacture: 2000 Capacity: up to 720 packs/hour (12 packs/min) Control: S7-300 Original technical documentation. Technical condition: used machine, operational at disconnection, condition as shown in the photos.

Condition: used, Year of construction: 2011, machine/vehicle number: CA77, Technical Specifications & Performance Data The Robino & Galandrino Minibloc is a compact capsuling machine engineered for precise capsule application in beverage production and industrial packaging environments. Designed for integration into a used bottling line or as a standalone unit, this second hand machine combines reliable mechanics with efficient operation for consistent results on glass bottles commonly used in wine and premium beverage applications. Pgodpeyh E Hzsfx Ahvoi Manufacturer: Robino & Galandrino Model: Minibloc Year of manufacture: 2011 Machine type: Capsuling machine Electrical supply: 400 V, three-phase Frequency: 50 Hz Input current: 1.2 A Frame concept: Compact miniblock layout for efficient floor space usage Advanced Automation & Control Systems Built to match modern beverage production requirements, the Minibloc supports dependable automation with straightforward operator controls. The three-phase 400 V, 50 Hz electrical setup ensures stable performance and compatibility with standard industrial power networks. Safety protections and operator-friendly adjustments help maintain productivity while reducing downtime. Operator controls engineered for practical, daily operation Electrical system: 400 V 3-phase, 50 Hz Safety interlocks and guards for protected operation Mechanical quick adjustments to support format changes Production Line Integration Capabilities This capsuling machine integrates seamlessly after cappers, corkers, wirehooders, or labelers within a bottling line. Its compact frame is well suited to retrofits in existing packaging machinery layouts and to diversified beverage production scenarios. Inline or standalone operation within a used bottling line Compatible with conveyors and standard line controls Format adjustments for varying bottle heights and diameters Ideal for integration in wine and premium beverage packaging Machine Condition & Maintenance History The 2011 Robino & Galandrino Minibloc is presented as a professionally maintained second hand capsuling solution suitable for immediate inclusion in beverage production and industrial packaging processes. It offers a dependable build quality typical of Robino & Galandrino engineering. Condition aligned with ready-for-operation expectations Robust construction supports long service life Operational Performance & Versatility Engineered for consistent capsule application, the Minibloc supports smooth feeding and stable spinning for a clean, uniform finish around the bottle neck. It is commonly configured for PVC shrinkable plastic capsules and polylaminate aluminum capsules used in still wine, fortified wine, and premium beverages. Precise capsule placement and secure finish Configurable for different capsule materials and bottle designs Stable mechanics designed for continuous-duty operation Installation Requirements & Site Preparation Site preparation is straightforward thanks to its compact footprint and standard utilities. Ensure suitable electrical service and...

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones CSD PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones CSD PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across carbonated soft drinks, cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET. Technical Specifications & Performance Data Manufacturer: Krones and GEA Year of manufacture: 2010 Psdpfjyhbmtjx Ahvegi Working hours: approx. 47,000 Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L) Products handled: carbonated soft drinks, cider, sparkling water, still water, juices with CO2 Filling technology: Ultra-clean, isobaric, volumetric PET filling Current product: Apple juice with water and CO2 Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neck Controls: Siemens Simatic S7 PLC platform Main Equipment Scope CIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/h Process: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanks Preforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unit Caps: Cassner cap feeding with cap rinsing and sterilization Blow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor) Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaning Coding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspector Conveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak tester Labeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glue Secondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicator Pack coding: Leisinger Jet 3 ink coder Palletizing: Krones Robopox Modulpal (2016) Advanced Automation & Control Systems Line Control & PLC Siemens Simatic S7-series PLC for coordinated line control, interlocks and diagnostics Integrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cycles Recipe and parameter management supporting fast changeovers between PET formats Quality Assurance & Traceability Laser date coding (Domino DDC 3) on primary packaging; inkjet coding (Leisinger Jet 3) on packs In-line inspection with Krones Checkmat systems for fill level and label presence/position Leak detection via Krones Flowliner for container integrity Production Line Integration Capabilities Upstream (Preforms to Bottles) Automated preform handling: tipper, conveyors and Krones Contifeed RS for steady feed Preform cleaning (Prejet Linear) to protect blowing ...

Condition: used, Year of construction: 2004, machine/vehicle number: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Current bottle format: 0.5L No. of cavities: 8 Psdpfex H Tf Tox Ahvogi Thread/neck finish: Alaska Max container height: 350 mm No. of grippers (inlet–outlet): 6 No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts. When supplied refurbished, a 6-month warranty is available, offering confidence in performance and longevity for second hand indus...