Used Soft Creem Machins for sale (64,528)

Condition: good (used), Foliant Mercury 760 NG Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing houses. Very good condition, ready to work. Year of production 2019. Description: – feeding from a high stack, head on a servo motor (elevator) – automatic separator Gisdpfx Ahsyun Taovop – pneumatic roller pressure – sheet straightening module – built-in Becker compressor – jogger on sheet collection – gilding module, rewinder Feeding system: servo motor head Max sheet size: 76×110 cm Min sheet size: 25×32 cm Max. capacity 1300 sheets B1 / h Max lamination speed: 20 m / min Temperature: 80 – 140°C Heating time 8 min Installed power: 6000 W -Power supply 380V Weight 810 kg

Condition: excellent (used), overall weight: 12 kg, BWF clamps Type RK 3 7 units available (28671) Length: 220 mm Width: 150 mm Giodpox Td N Nefx Ahvjp Height: 95 mm Weight per unit: 11.2 kg Price: 60 euros per unit

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, total width: 2,180 mm, total length: 790 mm, total height: 1,700 mm, DGUV certified until: 04/2027, type of input current: three-phase, overall weight: 258 kg, conveyor belt width: 320 mm, year of last overhaul: 2024, Iris Gulliver 20 Special Roll Production Line For all specialty rolls, seeded rolls Simple and efficient production of all types of square dough pieces. Whether triangular, square, or rectangular, Swiveling display Easy, stepless adjustment of cutting length Infeed and outfeed belts foldable upwards Weight range: approx. 25 to 800 grams Output up to 7,000 pieces/hour DGUV V3 tested – only from us Connection: 400V, 16A-CEE plug Dimensions: 2180 x 790 x 1700 mm (LxWxH, working position) Used machine Gjdpfxoyunchs Ahvoip Visit our large showroom

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Table size: 750 x 300 mm Gijdpfxsyulfas Ahvop Abrasive belt dimensions: 2600 x 150 mm Belt back panel: 850 x 200 mm Belt speed: 20 m/sec. Table stroke up to 200 mm Motor: 3.0 kW Oscillation motor: 0.25 kW Extraction connection: 100 mm Oscillation drive with geared motor Height-adjustable cast iron table with double column guide Sanding unit infinitely tiltable up to 45° Dimensions (LxWxH): approx. 1720 x 760 x 1160 mm Net weight: approx. 180 kg Availability: short notice Warehouse location: Flörsheim

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 belt sander with combination unit with electronic segmented pressure beam for sanding soft and hard veneers calibration and fine sanding of solid wood calibration of workpiece carrier panels deburring faulty veneers and lacquers intermediate sanding of PU, Hydro, UV, Nitro, and polyester lacquers sanding of barrier foils with graphical operating terminal NC-controlled thickness adjustment from 3–150 mm calibration roller activation via terminal with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm sanding width: 1100 mm sanding belt length: 2150 mm sanding belt speed frequency-controlled: approx. 2–18 m/sec sanding unit drive: 15 kW feed speed: 5/10 m/min compressed air: 6 bar compressed air requirement: 15 NL/min with belt blow-off: 490 l/min extraction connection: 180 mm air requirement sanding unit: 1800 m³/h required air velocity: 20 m/sec total power connection: approx. 17 kW weight: approx. 2000 kg dimensions (W x D x H): 1840 x 1670 x 2200 mm Machine will be equipped with a new feed belt Availability: short-term Gisdoyulfmspfx Ahvop Location: Flörsheim

Condition: used, Year of construction: 1984, Dowel boring machine Year of manufacture: 1984 Suitable for: Gjdpfxsyulfte Ahvsip Row drilling Cabinets Fittings Frames Standard swiveling device Max. passage: 820 mm Working width: 704 mm 23 drilling spindles; 32 mm spacing; drill attachment with M 10 thread, left and right Max. drill diameter: 40 mm Drilling depth horizontal: 120 mm Vertical: 80 mm Max. clamping height: 92 mm Motor power: 2.2 kW Air consumption at 6 bar approx. 6 l per cycle Weight approx. 340 kg Availability: short-term Location: Flörsheim

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 4955 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm Giedpfsyui S Rjx Ahvjp 87 kg The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2"). Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5760 € 111.17 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm Giodpfxsyui Sqj Ahvop 3 mm 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2")and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: used, Year of construction: 2014, x-travel 600 mm Gedpfx Aeycxinshvoip y-travel 500 mm z-travel 500 mm total power requirement --- kW weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Condition: used, Year of construction: 1977, max. wheel diameter 1000 mm gear width 180 mm Giodpfxjyb S H Ds Ahvop max. module 7 min. module 0,5 min. ram stroke 16 mm max. ram stroke 180 mm table hole 160 mm total power requirement 4 kW weight of the machine ca. 5,2 t

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 430 mm z-travel 510 mm control Mazatrol Smart table surface area 900 x 430 mm max. table load 500 kg number of spindle speeds 40-12000 U/min rapid speed 42000 mm/min tool magazine with 30 Plätzen max. tool diameter 125 mm weight of the machine ca. 4800 kg Capacity: External dimensions of the machine table: 900 x 430 mm Travel range X/Y/Z axis: 560/430/510 mm Distance from spindle head to table surface: Min: 150 mm Max. 660 mm Spindle: Spindle speed: 40-12000 (two electrical stages) Feed rate: Rapid traverse speed: 42000 mm/min Cutting feed rate: 1-8000 rpm ATC magazine: Tool magazine slots: 30 Tool shank type: MAS BT-40 Giedpoyukgiefx Ahvjp Max. tool diameter: with adjacent tools: 80 mm without adjacent tools: 125 mm Max. total weight of tools in magazine: 120 kg Equipment/accessories: Coolant system Vices (not shown in the photo) Tool holders Tools Documentation

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Godpfx Ajyugvajhvsip Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: good (used), Year of construction: 2009, operating hours: 21,955 h, functionality: fully functional, HEIDENHAIN iTNC530 controller Table dimensions 5300 x 750 mm Gedpfxeyugupj Ahveip Maximum table load 4500 kgs X-axis travel 4500 mm (pendulum operation) Y-axis travel 800 mm Z-axis travel 620 mm Spindle nose to table surface 325 - 925 mm Spindle speed 12000 rpm (Kessler Celox motor spindle) Torque 183 Nm Spindle taper HSK63 ATC 56-position magazine Middle wall in working area - pendulum operation possible Rapid traverse X/Y/Z = 30/40/40 m/min Power consumption 25 kVA Weight 21000 kgs Space requirement L x W x H = 10.4 x 4.2 x 3.2 m Equipment, accessories - Large chip conveyor - Large inclined water system 1800 l Internal coolant system and flushing pump - 2x special-design extraction systems – without piping - Machine hood with automatic roller blind - Machine doors with automatic drive and Rotoclear window - Water system 3 x 2 m, position to the left of or behind the machine - Hydraulic clamping unit for machine interior - Blum RMP measuring probe - Separation wall – pendulum operation possible - Hedelius service complete - Pipes for machine cooling, flushing, and pneumatics replaced in 07/2024 - Vises and fixtures on machine table are not delivered with the machine. The machine is no longer in production (it has been professionally stored) and was dismantled in fully functional condition.

Condition: good (used), Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm Gedefg Th Aopfx Ahvsip -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Condition: used, FANUC ROBODRILL ALPHA T21 i FIa is a Vertical machining center delivering precision, high accuracy and reliable performance. Working capacities: table 850 x 400 mm, table load max 300 kg, travels X700 mm, Y400 mm, Z330 mm, total 5 axes, spindle nose-to-table 250–580 mm, tool magazine 21 positions, max tool weight 23 kg. Main technical specs: stepless spindle 100–24,000 t/min, rapid traverse 54 m/min, spindle power 5.5 kW, supply 3x 400 V 50 Hz, total installed power 11 kVA; machine weight ~2200 kg; footprint L2140 x W2000 x H2350 mm. Achieves tight tolerances; suited for automotive, watchmaking, machine tool, aerospace and medical applications. Giodpfjyugyrox Ahvop

Condition: used, Year of construction: 2008, Technical details: x-travel: 1400 mm y-travel: 1200 mm z-travel: 1350 mm control: MSX- 701 Mapps III table surface area: 800 x 800 mm rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2,0 t numbers of pallets: 2 turning speed range: 8000 1/min power capacity - milling spindle: 37 kW Gsdpfx Ahjwi Ibuevjip no. of tools in the magazine: 60 Stück tool taper: HSK-A 100 weight: 31 t dimensions: 5,9 x 3,48 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - Parts program memory 1 MB - Knoll 70 bar high pressure and filter system - Electrostatic oil dust collector LTA - elect. hand wheel - renishaw probe - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis *

Condition: used, HERMLE B 300 is a 5‑axis machining center engineered for precision, high accuracy and production reliability. Working capacities: travels X 800 mm, Y 600 mm, Z 500 mm; table load max 250 kg; A‑axis ±110°; C‑axis 360°; max tool Ø 125 mm, tool length 300 mm, max tool weight 8 kg. Key specs: spindle taper HSK‑A63; spindle speed 20–15,000 rpm; spindle power 10 / 19 kW; rapid traverse 30 m/min; acceleration 5 m/s; max feed force 8,000 N; supply 3x400 V 50 Hz; total power 31 / 43 kVA; machine weight ≈ 8,500 kg. Equipment: 30‑position tool magazine, 1,000 L coolant system, BLUM tool breakage monitoring. Delivers tight tolerances; suited to automotive, watchmaking, aerospace, medical and toolmaking. Gedpfx Aoyugg Sjhvoip

Condition: used, Year of construction: 2011, functionality: fully functional, Spindle: Tool holder: HSK-32E (according to DIN 69893) Speed: 20 – 42,000 rpm Feed: Feed rate: continuously programmable up to 40,000 mm/min Rapid traverse: 40 m/min Worktable (NC rotary table with swivel axis): Clamping surface: Ø 190 mm C-axis (rotation): 360° rotational range A-axis (swivel): -10° to +110° Table load: max. 10 kg (centered on table) Tool changer: Magazine positions: 60 positions (HSK-32) Max. tool length: 200 mm Max. tool weight: 1 kg Additional equipment & accessories: Infrared probe OMP400 BLUM tool measurement Electronic handwheel HR410 Integrated handling system ROBOWORKER Giedpfoyufq Nsx Ahvjp

Condition: used, Year of construction: 1983, functionality: fully functional, planing length: 550 mm planing width: 500 - 640 mm workpiece height: 450 mm max. ram stroke: 550 mm vertical movement of the table: 370 mm vertical movement of steel head holder slide: 140 mm Godpfx Ahoyufqvoveip Table dimensions (LxW): 500 x 315 mm Table height: 315 mm Speed settings: 6

Condition: excellent (used), CATALOG NUMBER 7762 TECHNICAL DATA THICKNESSER: - shaft width: 320 mm - 3-knife planer shaft - max thickness of the processed element: 180 mm - thicknesser shaft guard - from above: – anti-kickback fingers Giedpfexhdtnsx Ahvjp – feed shaft, toothed – planer shaft – outfeed shaft, smooth, feed CIRCULAR SAW: - max blade diameter: 300 mm - max cutting height: 80 mm - blade bore diameter: 30 mm - adjustable blade up/down - cutting width with fence: 270 mm - table dimensions: 750x460 mm - fence SPINDLE MOULDER: - spindle diameter: 30 mm - adjustable spindle up/down - spindle height: 100 mm - fence - extraction port diameter: 100 mm - dimensions (LxWxH): 1700x2400x1100 mm - weight: 340 kg ADVANTAGES – Bulgarian production – Very good condition – Multi-function, used Net price: 6,900 PLN Net price: 1,640 EUR at exchange rate 4.2 EUR (Prices may vary with larger fluctuations)

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle Gjdpfoyufp Eox Ahveip number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: used, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, height adjustment type: mechanical, overall weight: 450 kg, – Italian production – year of production 2016 – pre-milling – DTR, CE TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg Gjdewb Ha Topfx Ahvjip

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Milling spindle Giedpfjyufnujx Ahvop number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i Gedpjyufkvjfx Ahvoip x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe

Condition: good (used), Year of construction: 2004, Machine is good working condition. Gjdpfsyufn Iex Ahvjip Control unit Heidenhain TNC 530 Parts shown by hand not come.