Used Slt 100 for sale (24,400)

Condition: used,

Condition: used, Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Kodpfjxbgrgex Ahbonc Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint: light gray (RAL 9002) Door, double-leaf: hinged on the left and right Equipment: Passage through the floor and ceiling: 2 pieces each, nominal diameter 100 mm, for installing the pulsation table Passage in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measuring and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … ±0.5 K (time-dependent) depending on the range, in the stable state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the stable state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the stable state Temperature change rate measured in the outlet without test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C - Heating: 0.5 K/min on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic replenishment Condensate drain: backpressure-free, 3/4" hose connection Mains connection: 400 V; 3 PH+N PE; 50 Hz Connection value: max. 10 kVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen changeover, 12 weights each with 5 kg • 1 base frame in normal steel welded construction for fastening to the underside of the climate testing chamber. This frame is equipped with removable sheets on all sides and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearing and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttock simulation • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered at a later date after a precise definition.) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control with 2 hand valves, a filter-regulator unit and a shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons, 2 release buttons, 2 speed indicators, 2 potentio

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. Knedpfx Aozuuimehbjc The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,400 h, load capacity: 1,800 kg, lifting height: 5,070 mm, free lift: 1,670 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished, no warranty Kjdpfx Ahjytkc Usbsnc Technical condition: very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: Tested (C5 test) with 100% Battery type: PzS Battery year of manufacture: 2025 Battery condition: 80 - 100% Description: Overhauled, maintained and inspected in accordance with FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, third valve, rear working light, front working light, overhead guard, front windscreen, safety light, joystick,

Condition: used, This listing is for a Tecan Genesis 150 2002 Liquid Handling Station - SPARES ONLY Knsdpfxoxzg I Uo Ahbec

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Knodpoxwa Uyefx Ahbsc Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, maximum load weight: 911 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 3,070 mm, loading space width: 1,530 mm, loading space height: 350 mm, total width: 1,660 mm, total height: 1,000 mm, A9 GA00084, Flatbed trailer, type SySTEMA SH .1, WSESHPF3XRGA00084, with overrun brake, open box body, 3.01 m x 1.53 m, 13" tyres, 100 km/h Kodpfxsym If He Ahbsnc Loading height: 600 mm Errors and prior sale excepted.

Condition: used, maximum load weight: 2,184 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,070 mm, loading space width: 1,830 mm, total width: 2,320 mm, total height: 980 mm, Low-loader tandem axle trailer, manufacturer STEMA, type SySTEMA ST .2, gross weight: 2,700 kg, overrun braked, 100 km/h permissible speed... and much more. Subject to errors and prior sale. Knsdpeym Ihbsfx Ahbjc

Condition: used, Year of construction: 2001, Air suction collator HORIZON VAC-100a, 10 Stations, used Key Features - Efficient and Reliable: The Horizon VAC-100a is designed for demanding environments. It ensures your collating jobs are completed quickly and efficiently - Touch & Work: Thanks to 'Touch & Work' technology, the VAC-100a is easy and intuitive to operate - Memory: The machine has 9 programmable memory slots for repeat jobs, saving you time and effort - Accuracy and Precision: Say goodbye to miss-feed, double-feed, and jam problems. The VAC-100a offers error prevention controls to ensure each set is perfectly collated Specifications - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Performance: up to 9,500 sets/h - Loading capacity: 55mm/station - Power: 230V; 50Hz - 1.86kW - Dimensions: 842x652x1,961mm - Weight: 310kg Kodozv Rt Djpfx Ahbenc All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: reconditioned (used), Gomad wood lathe, type DNXA-40x100 A, after overhaul. For sale: Gomad DNXA wood lathe, Polish-made. Overhauled, with new electrical components and a one-year warranty. Turning diameter: approximately 42 cm. Bed length: 132 cm. Tailstock with rotating and eccentric locking. Two sizes of tool rests. Can be disassembled for transport; delivery is possible within approximately 100 km upon agreement. Three turning speeds adjustable by belt. M24 thread on the spindle, making it easy to attach chucks and faceplates. Kodozhn Shspfx Ahbjnc Excellent for learning woodturning. Suitable for both small and large bowls.

Condition: used, This listing is for Genlab OV/100/SS/F/DIG Oven The unit is in full working condition and ready for immediate use This high-quality laboratory oven features a stainless steel interior, fan circulation for temperature uniformity, and an intuitive digital controller for precise thermal processing. [[1](), [2](?srsltid=AfmBOoqrBx2xG5acm9HXLERUkvFsY4t5ruoXCtKGooEYCW5co-g 0--YA), [3]()] Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Kodpfxszc H Tbe Ahbsnc Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 160 mm Length of the planing table 1050 mm Feed motor 7 kW Feed speed 6-40 m/min. control MemoryPlus Weinig Powermat 1200 ----- with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely overhauled at our warehouse before delivery ! Detailed description: ----- 1. Weinig planer and moulder Powermat 1200 ----- Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----- First lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 125 - 180 mm In conjunction with PowerLock 93 - 180 mm Tool flight circle rebate cutter 130-160 mm Axially adjustable range 17 mm Folding device MarathonCoating in front of 1st lower tool holder 2nd spindle ----- First right vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment range 80 mm Radial adjustment range Min. tool diameter on stop plane 93 mm Max. tool diameter behind stop plane 200 mm 3rd spindle ----- First left vertical spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 80 mm Pressure shoe in front of left tool holder, including 2 side pressure rollers, spring-loaded 4th spindle ----- First upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 5th spindle ----- Second upper horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Speed ??8,000 rpm Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axially adjustable travel 40 mm Split pressure shoe in front of upper tool holder on tool flight circle adjustable and swinging away from the tool, spring-loaded. Upper spindle prepared for later installation of the cassette system 6th spindle ----- Second lower horizontal spindle Motor with brake 7.5 KW Spindle diameter 50 mm Kedovnwbcjpfx Ahbonc Speed ??8,000 rpm Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Axially adjustable travel 40 mm Radial adjustable travel Min. tool diameter to table level 93 mm Max. tool diameter 6 mm below table level 225 mm All spindles with high concentricity. Lubrication points for the axial tool holder movement. Feed system ----- Electronic feed, infin...

Year of construction: 1999, condition: excellent (used), SICA-TRK-SY.U 25-160 PIPE SAW for LD-PE and HD-PE PIPES CHIPLESS CUTTING With central clamps with for all diameters Minimum diameter 25 mm Max diameter 160 mm Year of construction 1999 Status: Very good, in working order Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Ksdpfx Aem E Nqyshbonc The machine is my property.

Condition: refurbished (used), 100,000 liter buffer tank / pressure vessel, standing on a stand ring Vessel data: Volume: approx. 100,000 liters Operating pressure: max. 2 bar Operating temperature: max. 90°C Inner diameter: 3,000 mm Total height with feet: approx. 16,750 mm Ground clearance: approx. 800 mm Vessel with dished ends. Tank Equipment: ⦁ 1 DN 600 manhole with blind cover ⦁ 7x 3/8" pipes, closed inside the tank, open outside ⦁ 2 lifting eyes in the shell area ⦁ 2 lifting eyes on the top of the tank Kjdpfx Ahowf N Stsbenc ⦁ 2 lifting eyes on the tank feet ⦁ 1 2" drain, connected to the side of the shell with a ball valve ⦁ 1 Ø33.7 x 3.6 mm vent, connected to the side of the tank and down outside the insulation, with a ball valve ⦁ 1 DN 125 connection, ending in a flange on the outside, and connected to the center of the tank with a 90° bend ⦁ 1 DN 125 connection, ending in a flange on the outside, connected to the top of the tank and connected to the center of the tank via 2x 90° bends We are happy to offer the new tank insulation in any thickness upon request. Please contact us if you are interested!

Condition: used, TECHNICAL DETAILS - Belt width : 100 [mm] - Max. loading height : 50 [mm] - Max. temperature : 1150 [°C] - Adjustable belt speed : 5 - 100 [cm/min] - Max. belt load : 3 [kg/m] à 800 [°C] / 1.2 [kg/m] à 1100 [°C] - Heating length : 1000 [mm] - Cooling length : 1800 [mm] - Shielding gas : Nitrogen / Dihydrogen - Shielding gas flow : 2 [Nm3/h] Ksdpfsu E U Tbjx Ahbonc - Purge gas : Azote - Purge flow rate : 1.8 [Nm3/h] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 11.5 [kW]

Condition: excellent (used), Year of construction: 2011, Type: Horizontal CNC: Yes Knsdpfxez Hdx So Ahbjc MAZAK QUICK TURN SMART 100 S Machine type: CNC Horizontal Turning Machine Manufacturer: Yamazaki Mazak Model: QUICK TURN SMART 100 S Year of manufacture: 2011 Country of manufacture: Singapore CNC control: MAZATROL SMART Number of axes: 2 Chuck size: 6” Maximum spindle speed: 6,000 rpm Maximum turning diameter: 280 mm Maximum machining length: 310 mm Maximum swing over bed: 580 mm Bar capacity: approx. 51 mm X-axis travel: 200 mm Z-axis travel: 340 mm Turret: 12-station Tailstock: Yes Spindle nose: A2-5 Spindle bore: approx. 51 mm Machine weight: 3,400 kg DESCRIPTION : MAZAK QUICK TURN SMART 100 S CNC lathe, manufactured in 2011. Equipped with MAZATROL SMART CNC control, 2-axis configuration, 6” chuck, 12-station turret and spindle speed up to 6,000 rpm. Maximum turning diameter 280 mm and machining length 310 mm. Machine weight: 3,400 kg.

Condition: used, This listing is for a IKA Euro-star 100 D S002 Overhead Stirrer The unit is in full working condition and is ready for immediate release The IKA Eurostar 100 D S002 is a powerful laboratory overhead stirrer designed for a wide range of applications, ideal for mixing volumes up to 100 liters of water (H₂O). Engineered for precision and durability, it’s perfect for laboratories needing reliable and consistent mixing performance. Specifications Speed Range: 0/30 to 1300 rpm Maximum Stirring Capacity: 100 liters (H₂O) Maximum Viscosity: 70,000 mPas Maximum Torque: 100 Ncm Motor Rating Input/Output: 186 W / 136 W Motor Type: Maintenance-free brushless DC motor Chuck Range: 0.5 to 10 mm Protection Class: IP 42 Interfaces: RS 232 and USB for control and data documentation Dimensions (W x D x H): 86 x 208 x 248 mm Weight: Approx. 3.9 kg Power Supply: 230 V, 50/60 Hz Key Features Digital TFT Display: High-visibility screen for real-time parameter monitoring Removable Wireless Controller: Enhances ease of use and flexibility Kedpsxv Dg Rjfx Ahbjnc Microprocessor-Controlled Speed Regulation: Automatically adjusts speed to maintain precision within the set range, even with changes in sample viscosity Integrated Torque Trend Display: Enables real-time monitoring of viscosity changes Safety Systems: Built-in overload and anti-stall protection with automatic shut-off Quiet Operation: Low-noise performance for lab comfort Push-Through Agitator Shaft: Allows quick removal and easy cleaning Error Code Display: Notifies users of system alerts or issues Constant Speed Maintenance: Ensures uniform mixing, compensating for viscosity fluctuation

Condition: used, Year of construction: 1999, Horizon VAC-100m Air-Suction Collator Tower The VAC-100m is the ideal solution for print shops looking to expand their production capacity without investing in completely new systems. Its easy integration with the VAC-100a tower and high reliability make it a valuable addition to your production line. Key Features: Cost-efficiency: The VAC-100m is a cost-effective expansion solution as it operates without its own display and control unit. This reduces acquisition costs and allows you to expand existing systems efficiently. Expandable Capacity: With the ability to connect up to 5 VAC-100m towers to one VAC-100a tower, you can flexibly expand your collating capacity to up to 60 stations. This enables efficient handling of large jobs and a significant increase in your production capacity. Reliability: With error prevention features such as misfeed, double-feed, and jam control, the VAC-100m ensures that your production runs smoothly and without interruptions. Specifications: - Technology: Touch & Work (via VAC-100a) - Number of stations: 10 per tower - Expandability: Up to 6 towers (60 stations) - Error prevention: Misfeed, double-feed, and jam control - Job memory: 9 storage slots for repeat orders - Programs: Double cycle (non-stop operation), sheet insertion (single and double), booklet making program, block program, selective collating - Sheet size: Max. 500x350 mm; Min. 148x120 mm - Paper weight: 40-250 g/m² - Loading capacity: 55 mm per station - Performance: Up to 9,500 sets/h - Power: 230V; 50/60Hz - 1.86 kW - Dimensions: 842x652x1,961 mm - Weight: 310 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Knsdjz Ha E Uepfx Ahboc Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: as good as new (ex-display), overall weight: 7,700 kg, United Austrian Iron and Steel Works press brake Type: AG BAHM 100 4 Knedpfjz Hbu Rox Ahboc Capacity: 4000 x 100 tons Weight: 7700 kg The machine can be placed in a museum and is sold as is, where it is.

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Knsdpfxjwlkb Ns Ahbec Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: used, HUBER Recirculating Chiller / Thermostating Unit / Unichiller Huber Unichiller 020Tw-H Water-cooled recirculating chiller with Pilot ONE touchscreen control For sale is a used recirculating chiller / thermostatting unit from the manufacturer Huber. The unit is suitable for the precise temperature control and cooling of machines, industrial plants, laboratory applications, test benches, process circuits, and for general industrial temperature control applications. Technical Data: Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Equipment Type: Water-cooled recirculating chiller / thermostatting unit Temperature Range: -20 to +100 °C Temperature Control / Display: 5.7" Color Touchscreen Controller: Huber Pilot ONE Internal Temperature Sensor: Pt100 Connection for external Pt100 sensor available Temperature stability at -10 °C: 0.2 K Heating Capacity: 2 kW Cooling Capacity at +15 °C: 2 kW Cooling Capacity at 0 °C: 2 kW Cooling Capacity at -10 °C: 1.5 kW Cooling Capacity at -20 °C: 0.8 kW Circulation Pump: Type B Max. Flow Rate: 25 l/min Max. Delivery Pressure: 3 bar Pump Connection: G3/4 male Cooling Water Connection: G1/2 male Min. Filling Volume: 2.5 l Expansion Volume: 4 l Max. Cooling Water Pressure: 6 bar Min. Cooling Water Differential Pressure: 1 bar Refrigeration Unit: Water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. Operating Pressure according to nameplate: 25 bar Power Connection: 230 V / 1~ / 50 Hz Max. Current Consumption according to nameplate: 15.5 A Dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Weight: approx. 141 kg Sound Pressure Level: approx. 60 dB(A) Protection Class: IP20 Kodpezukkgsfx Ahbjnc Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories as shown in the pictures Application Areas: Process cooling Machine cooling Temperature control Laboratory applications Test benches Industrial plants Production plants Closed temperature control circuits Scope of Delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostatting unit Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Gero F 100-200/12SO high-temperature furnace, 201101895 - operating range: 30 - 1200°C / cable length (green): 3.9m, connection cable: 3.00m, used, in good condition, 100% functional, scope of delivery as shown in the photos. Knjdpfx Ahex Erpnobec

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 184 kg, total length: 1,100 mm, total width: 400 mm, total height: 660 mm, power: 18.5 kW (25.15 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 42 A, type of input current: AC, type of cooling: water, rotational speed (max.): 1,500 rpm, protection type (IP code): IP55, KSB Pump ETABLOC ETB 125-100-315 GGsAV66D301854B PD2M Single-stage, volute casing pump in block design with a motor-integrated frequency converter. Year of manufacture 2021 (operated for only 1 year; a higher flow rate was required, which is why the pumps were replaced). Equipped with a PumpDrive 2/PumpDrive 2 Eco frequency converter. Self-cooled frequency converter with a modular design, enabling stepless speed control of asynchronous and synchronous reluctance motors via analog standard signals, fieldbus, or control unit. Four pumps are available for sale. Individual sale is possible. The price is per pump. Supply voltage: 400 V Power: 18.5 kW Knedpfx Ahez I R Rkeboc Current consumption: 42.0 A Pump speed: 1500 rpm Medium: Ethylene glycol-based antifreeze, inhibited, closed system, e.g., Antifrogen N or comparable products. Main pump connections: Suction nozzle DN 125 / PN16 Discharge nozzle DN 100 / PN16

Condition: used,

Condition: used, ABB SDS 100 Servo Drives SDS102-069A0-400V00-0000 Kedpfx Ahed Iu Ulebjnc 3ADT211027R0001 46 kW Manufacturer-refurbished Output: 670V DC Input: 380-400V AC 39 kg Very large selection of ABB servo drives available. All of our units have been refurbished. See photos. Units are shipped regardless of the refurbishment date. Please note that the colors on your screen may differ slightly from the original colors. H1R1a23