Used Slotting Machine for sale (92,084)

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 10,740 h, machine/vehicle number: 1951 F 262, laser power: 4,000 W, travel distance X-axis: 4,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,020 mm, swivel angle B-axis (min.): -135 °, swivel angle B-axis (max.): 135 °, TECHNICAL DETAILS Linear axis travel paths (XYZ): 4,500 x 2,500 x 1,020 mm Rotary axis travel paths: A-axis ± 360º continuous, B-axis ± 135º C-axis: ± 10 mm Max. speed of linear axes (XYZ): 50 m/min Combined speed of linear axes: 85 m/min Max. speed of rotary axes A, B: 540 °/s Acceleration of rotary axes A, B: 60 rad/s² Laser type: CV4000 Laser Installed laser source power: 4,000 W MACHINE DETAILS Operating hours: 10,740 h Power supply: 400 V, three-phase, 50 Hz Installed cooling unit power: 53 kW / 58 kVA Extraction and dust collection system power: 15 kW / 18 kVA EQUIPMENT Djdpfx Ajxd Um Ref Iecn - OPTIMO machine - CNC control panel: P30L S/N 15/40 - 0083-01 - Prima Power remote control, serial number: 14/06 00489 - Hyfra Sigma 52-S cooling system - Donaldson DFPRO12 extraction and dust collection system - Donaldson MD2 micro-dosing system The machine is powered, however, air and gas supply are required. These are not available on site. Dismantling and loading can be arranged by a company for approx. €22,000.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Dcjdpfx Afsxhfu Hs Isn Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, table bore: 80 mm, table diameter: 145 mm, gear diameter: 125 mm, controller manufacturer: Siemens, controller model: SINUMERIK 840 D, TECHNICAL DETAILS Maximum wheel diameter: 125 mm Maximum module: 3 Maximum gear width (spur gears): 24 mm Center distance: -25 to +180 mm Maximum swivel angle: 12° Maximum helix angle: 45° Table Table diameter: 145 mm Table bore: 80 mm Infinitely variable table speed: 0.03 – 50 rpm Shaper spindle Stroke rate (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaper spindle diameter: 85 mm Cutter holder mount: HSK 80 B Dodpfx Asxf Azxof Iocn Tool and workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control: SINUMERIK 840 D MACHINE DETAILS Electrical data Drive power: 7.5 kW Total power requirement: 30 kVA Weight and dimensions Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Swiveling counter-holder with 4 positions Automatic workpiece changing device Linear workpiece conveyor

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,500 mm, table length: 4,000 mm, table width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 5,000 mm Y-axis travel: 2,800 mm Z-axis travel: 1,500 mm Table length: 4,000 mm Dsdjxfiazjpfx Af Iocn Table width: 2,000 mm Max. table load: 20,000 kg Spindle speed: 20 – 3,000 rpm Spindle power S1 = 100%: 30 kW Spindle power S3 = 60%: 35 kW Max. spindle torque: 1,250 Nm at 226 rpm Tool holder: ISO SK50 Number of tool changer positions: 100 Milling Head Automatic milling head: Index 2.5° Straight milling head: Index 1.0° Feed Rate Working feed rate: 2 – 5,000 mm/min Rapid Traverse X-axis: 12,000 mm/min Y-Z-axis: 15,000 mm/min MACHINE DETAILS Control: HEIDENHAIN TNC426CB Dimensions (L x W x H): 9,800 x 6,200 x 7,100 mm Machine weight: approx. 31,600 kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, edge thickness (max.): 20 mm, plate thickness: 60 mm, controller model: IMATRONIC 121/01, TECHNICAL DETAILS Djdpfx Afoxf Ewvj Iocn Edge thickness, coil: 0.3 – 3 mm Edge thickness, strips/sheared pieces: 0.8 – 20 mm Panel thickness: 8 – 60 mm Motorised chain feed from below (variable): 6 – 30 m/min MACHINE DETAILS Electronic control: IMATRONIC 121/01 EQUIPMENT Levelling unit with NC adjustment 08.376: (4.5 kW × 2 at 9,000 rpm) Edge heating lamps: 1.5 kW × 2 Glue unit 283.1513: (hot-melt glue + preheater) with NC adjustment Glue unit 08.42: (0.66 kW × 2 at 12,000 rpm) Profiling group 08.0555: (1.85 kW × 2 at 12,000 rpm) Multifunctional unit 08.348: (0.66 kW × 2 at 12,000 rpm) Corner copy routers 08.519 Glue scraper group 08.50 Brushing unit 08.612: (0.25 kW × 2 at 1,500 rpm) Unit 08.181: (4.4 kW × 1 at 6,000 rpm) Belt sanding unit 08.062: (1.8 kW × 1 at 3,000 rpm) Upper pressure system with motorised rubber belt Entry fence with NC adjustment Pressure zone Roll holder with 1 roll Automatic end trimming tool change (cross system)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1703, The SEAC FPM-400 combines the SEAC FPM-200 and SEAC FPM-350! The machine has been upgraded with additional equipment (see equipment)! TECHNICAL DETAILS Productivity: 150–320 pieces per minute MACHINE DETAILS Dcsdpfjxd Ubzjx Af Ion Operating hours: 672 h EQUIPMENT Spare parts Belt system converted from timing belt to V-belt Pump for water pressurization Comb installed at the fish fillet outlet

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center height: 225 mm, controller model: Fanuc 16T, TECHNICAL DETAILS Centre height: 225 mm MACHINE DETAILS Dcedpfxsxlix Dj Af Ien Control: Fanuc 16T

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Max. punching force: 220 kN Max. sheet thickness: 6 mm MACHINE DETAILS Dcedpfxoxhfnao Af Ien Dimensions & Weight Dimensions: 7,500 x 7,500 x 2,500 mm Approx. machine weight: 17,500 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Dcedpfexf Ak Tex Af Ion Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axes: 100 m/min B / C axes: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axes: 10 m/s² B / C axes: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Cutting gas: Nitrogen Control system: Siemens SINUMERIK 80 D EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including rear protection Scrap conveyor 4× configurable control interface Valve island for 8 pneumatic clamps per side 2× loading status lights for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas compressed air Dedpfx Aexlctzef Iocn Renishaw touch probe Measuring head (without touch probe) Measurement data processing 3× horizontal device interface Extraction piping Rotary changer safety enclosure including safety device, 1 window, and column for control panel Status indicator lamp top & bottom Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains Dodpfx Afsxg Ix Ss Ijcn - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Djdpov Dpy Nefx Af Ijcn Unit 1 Unused and New Condition $20,000.00 USD Unit 2 Used - Excellent Condition $16,000.00 USD

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 26BB2444, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Electrical Data Connection: 380 V / 50 Hz Rated power: 10 kVA Fuse rating: 25 A Dcsdexliwyopfx Af Ijn Control voltage (AC): 220 VAC Control voltage (DC): 24 VDC EQUIPMENT Coolant tank

Condition: like new (used), Year of construction: 2005, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: will advise enquirer, pressure: 200 bar, this machine has very little use and is as new condition Dcodpfx Aewgkhrof Isn

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter: 100 mm, pipe length: 4,100 mm, bending angle: 183 °, bending radius: 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR Dcedjtrd T Tepfx Af Isn 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 50, laser power: 12,000 W, sheet thickness steel (max.): 100 mm, total length: 125,000 mm, warranty duration: 60 months, GX(Pro) Double Exchange Platform Sheet Fiber Laser Cutting Machine. Working platform size: 3048mm*1524mm, 4064mm*2040mm, 6096mm*2540mm, 12500mm*2540mm; Laser source power: 3000 - 40000W Dcedperuz Uxsfx Af Ion Optional function: automatic loading and unloading system

Year of construction: 2017, condition: ready for operation (used), Additional Equipment Dcedsxgwa Sspfx Af Ion Mold temperature control Automatic activation lamp Automatic last rotating Automatic mold slider closing Measurement & quality control tools This Kloeckner Desma PU D522/12-LDI was manufactured in 2017. Designed for PU injection and shoe production, featuring a 12-station setup with a clamping force of 70 kN. It includes a reaction injection molding unit, automatic mold slider, and motor capacity of 23.16 kW. Heating capacity stands at 45.50 kW. Contact us for more information about this machine. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2011, operating hours: 3,200 h, functionality: fully functional, Firma Montrasio GmbH kann Ihnen dieses sofort lieferbare Maschine zur Verfügung stellen. Workpiece Data Workpiece Diameter (max.) Ø 850 mm Normal Module Range 5 – 20 mm Face Width (max.) 125 mm Number of Teeth (max.) 360 Basic Angle Setting Range ± 90° Tool Data Grinding Wheel Diameter (min. – max.) 229 – 508 mm (9 – 20") Grinding Wheel Height incl. Base Plate (max.) 135 mm Tool Spindle Seat HSK-E63 DIN 69893-5 Grinding Spindle Rotation Speed (max.) 4,500 rpm Eccentric Speed (max.) 3,800 rpm Dresser Speed (max.) 6,000 rpm Nominal Grinding Spindle Power 27 kW Workpiece Spindle Seating Diameter (Oerlikon Outer Cone 1:4) – Seating Diameter (Inner Cone) Ø 203.2 mm (8") Djdexizbxspfx Af Iecn Workpiece Spindle Bore Ø 150 mm Work Spindle Depth 740 mm Workpiece Spindle Rotation Speed (max.) 40 rpm General Machine Data Total Connected Load (without Filter System) 60 kVA Machine Dimensions (including Filter System) approx. 5,790 x 4,500 x 3,280 mm Machine Net Weight (without Filter System) approx. 24,400 kg

Condition: used, Year of construction: 1988, x-travel 870 mm y-travel 370 mm z-travel 400 mm table-size 310 x 1370 mm distance vertical spindle / table 50 - 450 mm feed - longitudinal/cross 20 - 800 mm/min 9 - 355 mm/min rapid traverse longitudinal and cross 3000 / 1375 mm/min spindle taper SK 50 spindle turning speed range 40 - 1750 U/min spindle speed: 12 Stück total power requirement 5,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,9 x 2,0 x 1,5 m - Powerful CNC universal milling machine - Includes Fanuc control system - Kneading milling head Dcedpfx Afexlkw Uj Ien - Automatic feeds on X/Z/Y axes - Central lubrication system - Coolant system - Pivoting machine light - Splash guard tray - Separate transformer

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Dcsdpfx Afjxh Rqts Ijn Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°

Condition: used, Year of construction: 1982, Technical details: internal diameter: 300 mm grinding depth: 418 mm total power requirement: 13,6 kVA weight of the machine ca.: 4 t Dodpor R Ellofx Af Iecn grinding length: 1500 mm Grinding-wheel diameter: 150 mm boring diameter: 300 mm

Condition: used, Year of construction: 2004, Technical details: Dodpfx Asv S Aiyjf Iscn plate width: 2540 mm plate thickness: 2,5 mm distance between columns: 2830 mm stroke adjustment: 30 mm bending angle max.: 0 - 180 ° bending radius min.: 1,25 mm daylight opening: Oberwange: 200 mm back gauge - adjustable: kein Hinteranschlag mm height over floor: 900 mm total power requirement: 2,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 3,35 x 1,0 x 1,5 m Hydraulic Folding Machine, electronically controlled. -max. sheet thickness at 400 N/mm² 2,5 mm according to manufacturer -smallest permissible bending radius 1.25 x sheet thickness -opening of the upper beam max. 200mm (motor driven) -bending trough is manually operated -Lower beam is fixed -operated by pushbutton / double foot switch *

Year of construction: 2018, condition: ready for operation (used), General Data Measurements width 1863 mm Dcsdpfx Afjxlvbfs Ijn Measurements depth 3700 mm Measurements height 1900 mm Machine weight 5950–6100 kg Control Unit Brand FANUC Main Drive Number of spindles 2 Spindle speed range 2800 Number of axis 4 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30 m/min Z-Axis Movement 830 mm Z-Axis Rapid Traverse 30 m/min B-Axis Movement 830 mm B-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm over bed 780 mm Tail Stock Pinol diameter 100 mm Tools Number of station 12 This 4-axis DOOSAN Puma 2600/500 horizontal turning machine was manufactured in 2018. It features a maximum turning diameter of 481 mm and a length of 755 mm, with rapid traverse rates of 30 m/min on the X, Z, and B axes. The spindle supports a speed of 2800 rpm and a through hole diameter of 115 mm. Ideal for precision turning operations. Contact us for more information about this machine. Application Types Turning

Condition: used, Tru Mark TruLaser Cell 8031; Including Laser TruDisk 3001 (6c); Riedl cooling system RL170 TR.03; Herding COMP 1500-141/15/9 SB filtration system; KabelSchlepp WBC 063.00L conveyor Dsdpfxsw U N T Ie Af Ijcn

Condition: used, Year of construction: 1967, Please check the sales brochure for more information. Dcodoxcm Rlopfx Af Ijn