Used Colchester Tornado 80 for sale (56)

Condition: good (used), Year of construction: 1995, Used Colchester CNC lathe Ppedpfx Ajy Atq Ishyer Type: Tornado 100 Max turning diameter: 420 mm Max turning diameter over support: 297 mm Max working diameter: 186 mm Max turning length: 350 mm Drive power: 5.5/7.5 kW Spindle bore: 61 mm 12-position tool changer with VDI 3425/Round 30 Fanuc O-T control Year of manufacture: 1995 Incl. tool holder Excl. tools

Condition: good (used), Colchester Tornado 100 CNC Lathe Ppsdpfxoy Einhj Ahyer - Max. turning diameter: 400 mm - Distance between centers: 500 mm - Bar capacity: 42 mm - Year of manufacture: 1995 - Weight: 2,400 kg - Turret with 12 stations - VDI 3425 / 30 tool holders Hydraulic collet and chuck

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control FANUC 18i-TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. Podpsvzcpljfx Ahyspr The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: good (used), Year of construction: 2000, Equipment: documentation/manual, LATHE TORNADO COLCHESTER 200 CNC FANUC GE Series DIAM. AUTOCENTRATING MANDRIN : 250 mm CORSE : X : 215 mm Ppodpfx Ahetuut Ueysr Z : 400 mm TOOL MAGAZINE : 12 POSITIONS INCLUDING VARIOUS TOOL HOLDERS AND TOOLS BAR WIDTH : 65 mm TAILSTOCK IN CYCLE CHIP EVACUATOR INCLUDING ALL DOCUMENTATION

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Ppodpfx Ahoww Irisyer Technical details shown on picture.

Condition: good (used), Year of construction: 2004, Technical details shown on pictures. Psdpfx Aeww Haxehyopr Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Pedoq Atxyepfx Ahyspr Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: used, Year of construction: 2002, COLCHESTER - TORNADO A50 - 2002 - system FANUC Series 21i-T Psdpfxoyl Srnj Ahyopr - with bar feeder MBF 1000 - used condition - under power

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Ppjdpfx Ahernkhyjysr Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2000, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: T 90077, turning length: 450 mm, turning diameter: 230 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, - Year of manufacture: 2000 Pedpjxgtrkefx Ahyopr - Single owner, used in-house - Fully functional, under power, ready for demonstration - Operating hours: 17,200 h - X-axis travel: 200 mm - Z-axis travel: 450 mm - Turning diameter: 230 mm - Turning length: 450 mm - Spindle speed: 4,000 rpm - Spindle bore: 52 mm - Spindle motor power: 11 kW - Control: Fanuc 21 i - Tailstock - 12-station VDI 30 turret - Chip conveyor - Weight: 2,800 kg Net price ex-works, unloaded, from location Luckenwalde (Germany), excluding transport

Condition: new, Year of construction: 2026, 0554 mm 370 mm 3000 mm 280 mm 104 mm 11 kW Ppodsy Erx Njpfx Ahysr

Condition: new, Year of construction: 2026, 0554 mm Ppsdpfx Ahewyd Tnoyer 370 mm 2000 mm 280 mm 104 mm 11 kW

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Ppedpfxey E S D Es Ahysr

Condition: ready for operation (used), Various old small machines are available. 1) Lathe Colchester Chipmaster 5x20. 2) Multi-spindle drilling machine Steinel BGS 140. 3) Orbital riveting machine Steinel VS. 4) Hydraulic power unit Sauter HA1202. 5) Laminating machine Sallmetall. 6) Drum pump Flux F 407. 7) Hydraulic power unit Sauter HOV4. An on-site inspection is possible. A package sale is desired. Pedpfxsy D Tr Ie Ahyopr

Condition: good (used), For sale: Colchester Triumph 2500 lathe, fully functional and ready for operation. The lathe is equipped with a Fagor digital readout and has a coolant pump installed beneath the chip tray. Technical data: Center height: 167 mm, Distance between centers: 635 mm, Swing over bed: 330 mm, Swing over cross slide: 210 mm, Spindle bore: 40 mm, Drive power: 2.2 kW. The sale includes 15 tool holders, a live center, and machine feet. Loading is problematic. Ppsdpfx Ajxw N I Nohyor

Condition: ready for operation (used), Year of construction: 1992, spindle bore: 54 mm, turning diameter: 400 mm, turning length: 1,250 mm, overall weight: 1,700 kg, capacity 1250x400MM Heidenhain readout Ppodpfx Aheyztphoyjr spindle bore 54MM Multifix toolpost steadies (steady rests)

Condition: good (used), Year of construction: 1999, Parts shown by hand not come. Ppedpfjw Uiguex Ahyor Technical details shown on picture.

Condition: excellent (used), Year of construction: 2008, operating hours: 9,626 h, functionality: fully functional, spindle bore: 55 mm, turning diameter: 410 mm, turning diameter over bed slide: 246 mm, turning length: 1,250 mm, Colchester MultiTurn 2000 CNC Lathe Model: MultiTurn 2000 Control: FANUC Oi-TC Year: 2008 Swing over Bed: 410mm Swing in Gap: 600mm Swing over cross slide: 246mm Distance Between Centres: 1250mm Spindle Speeds: 15 – 2700 RPM Spindle Bore: 55mm dia. Motor: 7.5 kw Machine with: 250mm 3-jaw chuck 8 station auto indexing turret VDI30 Tool Holders Auto Lubrication Sliding Guards Coolant Work Light Ppodpfxoyxq Dqo Ahysr Dimensions: 2900 x 1700 x 1500mm high Weight: 2200 kgs

Condition: new, Year of construction: 2026, 0350 mm 196 mm 0650 mm 170 mm 42 mm 7,5 kW Pjdpfxjxxb Azj Ahyopr

Condition: new, Year of construction: 2026, 0400 mm 246 mm 1250 mm 195 mm 54 mm 7,5 kW Ppsdpfxjxcyxco Ahyer

Condition: new, Year of construction: 2026, 0460 mm 270 mm Pedpfowrma Uox Ahyepr 1500 mm 230 mm 76 mm 11 kW

Condition: new, Year of construction: 2026, 0330 mm 210 mm 1000 mm 167 mm Pjdpfxswp Tq Ue Ahyopr 40 mm 2,2 kW

Condition: new, Year of construction: 2026, 0330 mm 1000 mm Pjdswp Tqzjpfx Ahyopr 167 mm 40 mm 3000 U/min DIN 55029 D1-4

Condition: new, Year of construction: 2025, 0350 mm 196 mm 0650 mm 170 mm 42 mm Podpfx Ahswp Tpkjyspr 7,5 kW

Condition: used, machine/vehicle number: 1457, Outer-Ø: 205 mm Pedpfx Aheb Nxhmeyepr Height: 59 mm Camlock receptacle DIN 55029: size 3