Used Sieve for sale (365)

Condition: new, Year of construction: 2025, weight 540 kg diameter 1200 mm height 1100 mm 0 382 l total power requirement 1,9 kW voltage 350/50 V Nedpfsuddbvjx Ad Nocl length in total 1820 mm Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump - Magnetic valve - Control panel base Ncsdpfxjn Smbrj Ad Nsl - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Year of construction: 2023, condition: new, IMMEDIATELY AVAILABLE ! Vibratory finishing machines with separator The machines of the series VKUE can be used for the surface treatment of metallic and non-metallic workpieces. These machines have a large sieving surface and allow easy separation of the workpieces from the abrasive bodies. Optional accessories - Pneumatic sound flap - Pneumatic damper control - Frequency control - Metering pump Ncsdpfx Aden Smcle Nol - Magnetic valve - Stand for control panel - Flushing tube (different types) The pictures are for orientation only. The optional accessories are available additional charge.

Condition: used, Twin-shaft shredder Manufacturer: Fransson Weight: 1500 kg Mouth width: 750 mm x 680 mm With sieve Ncodpfx Aeycv Uhjd Nel Mesh diameter 50 mm Capacity: from 20-50 m3 per hour Equipment after repai

Condition: used, Year of construction: 2017, Mono rotor shredder 800 series 2017 used, working Nsdpfowcp H Ssx Ad Nscl blades and sieve in good condition, ready for use. including switch box. 30 kW, 40 mm sieve, other sizes in consultation, rotor length 800 mm, hopper dimensions 800 x 1200 x 950 mm Depth machine is immediately available and can be inspected.

Year of construction: 2024, condition: new, RSS 600 series Mono Rotor Shredder new model 2023 full options model. 18.5kw 40x40 knife block. rotor length approx. 600 mm infeed hopper approx. 600 x 900 mm Screen size in consultation motor cover and pusherbox guide strips as well PLC controlled with Reverse action as well an manual reverse. Conveyor and/or discharge screw is optional available. CE certificate/ Dutch suitable for various types of plastic/wood/or other material Nsdpfxoirt H Aj Ad Nocl delivery in consultation Adjustments to e.g. motors, sieve, frame possible. Infeed or discharge conveyors, storage, metal separation possible. Larger or smaller models also available. Intrested, reactions with your name, company name and telephone number. We will call you.

Condition: new, Year of construction: 2025, functionality: fully functional, RSS HD 4 Shaft Shredders in any size, Nedpfx Ash N Dmned Nocl Adjustments to e.g. knives, motors, sieve, frame possible. Supply and discharge belts, storage, metal separation possible. Larger or smaller models also available. optional fast hydraulical screen cleaning or changesystem for advise or information do not wait, contact us. Delivery in consultation.

Condition: excellent (used), Catalogue number 7867 TECHNICAL DATA - Feed hopper inlet: 1000x1250mm Ncedpoyab H Rjfx Ad Njl - Rotor working width: 440mm - 4-shaft design - Motor power: 2×7.5kW - Sieve: 20mm - Electric autoreverse - Extraction nozzle diameter: 180mm - Dimensions (LxWxH): 1200x1500x2000mm - Weight: 1192kg FEATURES – German-made – Four-shaft cutting mechanism – Autoreverse – Very good condition – Not repainted – Used shredder Net price: 45,900 PLN Net price: 10,930 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: like new (used), WEIMA WL 15 crusher chipper crusher – technical documentation – year of production 1992 TECHNICAL PARAMETERS : main engine power 37 kW motor power from the hydraulic pump 1.5 KW total power: 39.25 kW AUTOMATIC REVERSING HYDRAULIC DRAWER Ncsdpfsfm Tp Dox Ad Njl shaft rotation 90 U/min rotor length 1500 mm Knock multi-knife shaft 36 knife dimensions: 35 x 35 mm sieve fi 20 / 15 mm height of the pressure drawer 180 mm chip collection viper rotor diameter 245 mm hopper size 1500 mm x 1500 mm drawer length 1000 mm dimensions (length/width/height) 270 x 240 x 280 cm weight 4000 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Crusher of the German company WEIMA - overhauled - year of production 1992 - documentation TECHNICAL PARAMETERS: hopper dimension 800 x 1000 mm rotor diameter 315 mm rotor length 800 mm rotor rotation 90 rpm V-rotor main motor 22 kW number of knives 19 pieces Ncedpfsuditwjx Ad Njl rotating cutting knives 30 mm x 30 mm sieve fi 20 mm and 15 mm AUTOREWERS HYDRAULIC DRAWER height of pressing drawer 275 mm diameter of spigot fi 200 mm overall dimensions of the machine (length / width / height) 210 / 160 / 180 cm weight 1600 kg

Condition: used, functionality: fully functional, Vecoplan chipper for lumber shavings 45/16/ 2V - made in Germany - perfect chips directly into the kiln - vibrating system TECHNICAL PARAMETERS: - width 450 mm - height 160 mm - number of knives 2 pieces - engine power 50 kW - rotor diameter 500 mm - rotor length 475 mm - sieve 40 x 40 mm - top pulling gear shaft 4 kW - bottom pulling gear shaft 2.2 kW - reverse - vibrating feeder 10500 mm x 450 mm - motor power 2.2 kW - cross vibrator machine 4500 mm x 2200 mm - motor power 1.5 kW - height 2450 mm Transport dimensions: 1050 cm x 245 cm x 245 cm Njdpot Hr Drsfx Ad Njcl weight ~ 4 t

Year of construction: 2026, condition: new, functionality: fully functional, Features: -Screen drum length: 2000/3000 mm -Drum diameter: 900 mm -Sieving grids according to your specifications, square hole mesh or round hole perforated sheet metal -Fixed grids (welded), it is not possible to replace the grids -Electric motor power: 1.5/2 Kw -Self-cleaning grey side brushes (on request) -Possibility to add loading feeder -12 months warranty -Made in EU -CE compliant Nedpehrdmqjfx Ad Nscl

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 27,500 h, machine/vehicle number: S0711C0001, laser hours: 2,300 h, laser power: 1,000 W, laser wavelength: 515 nm, working range: 100 mm, Technical Specification Base Machine: TRUMPF TruPrint 1000: SN: S0711C001, Year of manufacture 2019, Installation December 2019 Build volume: Build cylinder diameter 100 mm, effective build area 97 mm, build height 100 mm Software version: H.M.I. Version 02.22.04 Operating hours: approx. 27,500 h* (including 2,290 h production time) *as of September 2023 Technical Specification Laser Unit: Ncedevptawepfx Ad Nel TruDisk 1020: SN L5210M0058 Power: Single laser, output power of 1000 W at the workpiece, green wavelength: 515 nm Operating hours: approx. 11,500 h* Additional Information: In September 2023, the system was inspected and uninstalled by TRUMPF Service. Up until this time, the machine was successfully producing high-quality parts in our facility (material used: copper alloy). Together with the system, you will receive the operating manual as well as the latest service report in digital format. The last maintenance contract with the manufacturer was valid until the end of May 2023. If you are interested or have any questions, please do not hesitate to contact us by phone or email. Additionally, a metal powder sieving unit from Piab Additive GmbH (formerly IB Verfahrenstechnik) can be purchased for €10,000.00.

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, Operating hours: 3597, First registration: 23.06.2016, self-propelled _____ Standard basic equipment: Fan unit - fan drive hydraulically operated via a gearbox-independent PTO located on the chassis (semi-hydrostatic drive) – Hydraulic fan drive – Hydraulic oil tank 50 l – Engine compartment finished with sound-absorbing material – Fan exhaust guided upward through the front superstructure of the hopper – Hydraulic pump, single for sweepings hopper – Sweepings hopper (with tailgate and sieve) and water tank made of 1.4003 stainless steel – Engine compartment paneling, standard steel – Gross hopper volume 6.5 m³ – Hopper floor made of alloyed stainless steel, 1.4301 – Hopper tipping angle approx. 55 degrees – Dirt chute made of stainless steel, 1.4003 – Inspection hatches right and left – Dirty water drain 4", A-coupling – Air guide sieve, manually foldable – 2 amber rotating beacons at rear of hopper – Pneumatically actuated air shut-off valve on suction hose – Multi-stage safety support, pneumatically operated – Marker lights at rear of hopper, side marker lights – Integrated water tank – Provision for rear suction hose boom or roof-mounted – Side marker lights. Sweeping intake – Intake, wear-resistant coated – Coarse pickup by tilting the suction nozzle – Suction hose diameter 250 mm – Disc brush, pushed – Disc brushes, hydraulically driven, steel – Disc brushes, steel, diameter 500 mm, pulled – Infinitely variable speed regulation for disc brushes – Two robust swiveling trailing wheels – Automatic raising of sweeping units when reversing – Working lights for sweeping assembly. Roller brush – Roller brush mounting, pulled – Brush length 1,300 mm, brush diameter 406 mm with synthetic bristles (chassis-dependent) – Hydraulically driven roller brush – Throw limit skirt for roller brush assembly. Water system – Water tank capacity approx. 1,554 l – Water tank made of 1.4003 stainless steel, coated – Water level indicator in cab – Water filling device, Storz C (2"), right – Manual water filling device, right and left – Water pump, hydraulically driven – Automatic water stop when lifting the sweeping units – Spray water connection, 3/4", rear right – Water blow-out system – Electric water valves in the cab – Dual nozzle bar, low pressure front. Njdpfx Adjfy Am Uo Nocl Instrument cluster and control panel – Bucher instrument cluster, incl. 7" color display – Ergonomic control unit mounted on driver’s door, equipped with main functions – Display includes the following features: water level indicator, operating hours, and rear axle load – Warning and indicator lights for rear axle load – Control and regulation unit for adjusting brush pressure (brush relief), stepless speed regulation of disc brushes – Electric valves for water system, operated from the cab – Operation of debris hopper functions via cable remote control from cab, also operable from outside – Operation of air guide sieve, controlled at rear right of vehicle – Overload indicator for rear axle load, warning light in display (option).

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics Nodpfshbdg Ujx Ad Nocl FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Ncedpfx Adswa Am Ho Nol Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Year of construction: 2026, condition: new, The PT-400 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 500 kg of apples per hour Juice yield from pressed apples: up to 75% Nsdpfsfgl Hfjx Ad Nscl Installed power: 0.8 kW, 230 V Dimensions L × W × H (mm): 1940 × 1000 × 1250 Weight: 500 kg Belt width: 400 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Juice pump

Year of construction: 2026, condition: new, The PT-1000 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 900 kg of apples per hour Ncsdpfofglxxex Ad Nol Juice yield from pressed apples: up to 75% Installed power: 1.5 kW, 230 V Dimensions L × W × H (mm): 2230 × 1190 × 1250 Weight: 700 kg Belt width: 500 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Juice pump

Year of construction: 2026, condition: new, The PT-1200 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Ncodpfxjukq T Ho Ad Nel Technical data: Capacity: up to 3700 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 2.5 kW, 230 V Dimensions L × W × H (mm): 3100 × 1650 × 2190 Weight: 2000 kg Belt width: 1200 mm Belt speed: adjustable Juice collection tray with sieve Juice pump

Year of construction: 2021, condition: excellent (used), machine/vehicle number: 2108-2592, Holaras AS-10 knive topper for onions with 2 knives Ncjdjx Hu Enjpfx Ad Nsl This 2 blade onion topper is specially designed for cutting of the tops of the onions or bulbs. By this knife topper the tails of the onions are not deducted, but they are cut by the rotory knives. Special vibrators with a targeted number of vibrations put the sieves with the onions on top in motion. Due to the high rotational speed and the special shape of the blades, a strong air is created. This air current sucks the tails through the sieves and cuts off just below the sieve. With extra knive, sieve and motors - Selfmade housing, which makes the machine a closed topper - Space between the bars of the sieves: 30 and 20 mm - Capacity 5 - 10 ton / hour When using the Holaras topping machines, the haulm is not pulled off, but cut of by fast rotating blades. This avoids damage because the blades do not touch the onions. The number of directed vibrations transmitted by specially designed vibrator-motors on the vibration-sieves is such that the onions move in a floating motion over the vibrationnsieves. The haulm (tops) is drawn through the openings into the sieves by a heavy airstream, downward, and then cut by the blades. The vibrator-sieves are easy to change. The vibrator-sieves are available for almost all types and sizes of onions and shallots. Seed onions, picklers, medium and ware-onions, shallots, are topped without difficulty by the Holaras topper without being damaged. It is important to use a sieve which is suitable for each kind of onion.

Condition: ready for operation (used), Screening machine KRUPP 21/55-2 Brand: Krupp Surface: 5500 x 2100 mm – 2 Decks Upper deck: sieve opening [] 35mm Lower deck: sieve opening [] 16 x 3mm Driving : 22 kW Ncsdpfxsn Unkfs Ad Nol Incl.: springs and spring consoles In stock: 2 pieces

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Ncjdjxmt Eqspfx Ad Nol

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 15024 Complete crushing plant for sale Metso 125 jaw crusher, 2008 model Metso GP 550 crusher, 2009 model Metso GP 300 crusher, 2012 model Locomotive A 132 coarse gauge, 1991 model Sizer, DP 2016 sight, 2016 model Terex TSH 7203-38 screen, 2013 model Nedpfx Aevg Nk Hod Nocl Metso FS 353 sieve, 2009 model Control/control room, 1 piece 20-foot container Electrical room/distribution room, 2 20-foot containers The facility is in daily use. See video.   Own weight: 1 Model: m/ matestasjon, sikteverk og kjeftknuse

Condition: used, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20763 Specifications: Approx. 2006-2007 model (stated by owner) Total hours: 13,800 (can increase) Chassis (see pictures) Central grease, some manual points Comes with an extra jaw (recently replaced) Hanging sieve Tape and rolls (see pictures) Main band completely overhauled with new band and side edges Daily operations Video is attached Deutz engine (provided by owner) Nsdpfewvzrajx Ad Nscl Ready for delivery Notes: An output psb nd is worn Own weight: 48000 Model: Ca. 2006 Sandvik 1208 Knuser med Sandvik hengesikt. God stand!

Condition: not inspected (used), Year of construction: 1983, Complete pellet production line. Made 1983 in DDR. Ncedpfjvukzcox Ad Nel Electrical cabinet, press, mill, cooling line(sieve transporter),cyclones, cooling bunkers 2pc., elevator, mixer. Some spareparts. Loading onto truck negotiable.