Used Sieve for sale (368)

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 Rsdpfxehbdg Uo Adaon WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, Operating hours: 3597, First registration: 23.06.2016, self-propelled _____ Standard basic equipment: Fan unit - fan drive hydraulically operated via a gearbox-independent PTO located on the chassis (semi-hydrostatic drive) – Hydraulic fan drive – Hydraulic oil tank 50 l – Engine compartment finished with sound-absorbing material – Fan exhaust guided upward through the front superstructure of the hopper – Hydraulic pump, single for sweepings hopper – Sweepings hopper (with tailgate and sieve) and water tank made of 1.4003 stainless steel – Engine compartment paneling, standard steel – Gross hopper volume 6.5 m³ – Hopper floor made of alloyed stainless steel, 1.4301 – Hopper tipping angle approx. 55 degrees – Dirt chute made of stainless steel, 1.4003 – Inspection hatches right and left – Dirty water drain 4", A-coupling – Air guide sieve, manually foldable – 2 amber rotating beacons at rear of hopper – Pneumatically actuated air shut-off valve on suction hose – Multi-stage safety support, pneumatically operated – Marker lights at rear of hopper, side marker lights – Integrated water tank – Provision for rear suction hose boom or roof-mounted – Side marker lights. Rsdpfx Adefy Am Ujajn Sweeping intake – Intake, wear-resistant coated – Coarse pickup by tilting the suction nozzle – Suction hose diameter 250 mm – Disc brush, pushed – Disc brushes, hydraulically driven, steel – Disc brushes, steel, diameter 500 mm, pulled – Infinitely variable speed regulation for disc brushes – Two robust swiveling trailing wheels – Automatic raising of sweeping units when reversing – Working lights for sweeping assembly. Roller brush – Roller brush mounting, pulled – Brush length 1,300 mm, brush diameter 406 mm with synthetic bristles (chassis-dependent) – Hydraulically driven roller brush – Throw limit skirt for roller brush assembly. Water system – Water tank capacity approx. 1,554 l – Water tank made of 1.4003 stainless steel, coated – Water level indicator in cab – Water filling device, Storz C (2"), right – Manual water filling device, right and left – Water pump, hydraulically driven – Automatic water stop when lifting the sweeping units – Spray water connection, 3/4", rear right – Water blow-out system – Electric water valves in the cab – Dual nozzle bar, low pressure front. Instrument cluster and control panel – Bucher instrument cluster, incl. 7" color display – Ergonomic control unit mounted on driver’s door, equipped with main functions – Display includes the following features: water level indicator, operating hours, and rear axle load – Warning and indicator lights for rear axle load – Control and regulation unit for adjusting brush pressure (brush relief), stepless speed regulation of disc brushes – Electric valves for water system, operated from the cab – Operation of debris hopper functions via cable remote control from cab, also operable from outside – Operation of air guide sieve, controlled at rear right of vehicle – Overload indicator for rear axle load, warning light in display (option).

Year of construction: 2026, condition: new, The PT-400 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Rjdofgl Hfjpfx Adaen Technical data: Capacity: up to 500 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 0.8 kW, 230 V Dimensions L × W × H (mm): 1940 × 1000 × 1250 Weight: 500 kg Belt width: 400 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Juice pump

Year of construction: 2026, condition: new, The PT-1000 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 900 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 1.5 kW, 230 V Dimensions L × W × H (mm): 2230 × 1190 × 1250 Weight: 700 kg Belt width: 500 mm Belt speed: adjustable Juice collection tray with sieve, mesh size Ø 1 mm Rodpfxefglxxo Adaon Juice pump

Year of construction: 2026, condition: new, The PT-1200 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Rjdpfx Adoukq T Hsaen Capacity: up to 3700 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 2.5 kW, 230 V Dimensions L × W × H (mm): 3100 × 1650 × 2190 Weight: 2000 kg Belt width: 1200 mm Belt speed: adjustable Juice collection tray with sieve Juice pump

Year of construction: 2021, condition: excellent (used), machine/vehicle number: 2108-2592, Holaras AS-10 knive topper for onions with 2 knives This 2 blade onion topper is specially designed for cutting of the tops of the onions or bulbs. By this knife topper the tails of the onions are not deducted, but they are cut by the rotory knives. Special vibrators with a targeted number of vibrations put the sieves with the onions on top in motion. Due to the high rotational speed and the special shape of the blades, a strong air is created. This air current sucks the tails through the sieves and cuts off just below the sieve. With extra knive, sieve and motors Redpfsx Hu Enex Adaen - Selfmade housing, which makes the machine a closed topper - Space between the bars of the sieves: 30 and 20 mm - Capacity 5 - 10 ton / hour When using the Holaras topping machines, the haulm is not pulled off, but cut of by fast rotating blades. This avoids damage because the blades do not touch the onions. The number of directed vibrations transmitted by specially designed vibrator-motors on the vibration-sieves is such that the onions move in a floating motion over the vibrationnsieves. The haulm (tops) is drawn through the openings into the sieves by a heavy airstream, downward, and then cut by the blades. The vibrator-sieves are easy to change. The vibrator-sieves are available for almost all types and sizes of onions and shallots. Seed onions, picklers, medium and ware-onions, shallots, are topped without difficulty by the Holaras topper without being damaged. It is important to use a sieve which is suitable for each kind of onion.

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Rjdpfxjxmt Eqo Adajn

Condition: ready for operation (used), Screening machine KRUPP 21/55-2 Brand: Krupp Surface: 5500 x 2100 mm – 2 Decks Upper deck: sieve opening [] 35mm Lower deck: sieve opening [] 16 x 3mm Driving : 22 kW Incl.: springs and spring consoles In stock: 2 pieces Rjdjn Unkfepfx Adaon

Condition: excellent (used), functionality: fully functional, Catalogue number 7442 TECHNICAL DATA - Infeed width: 410mm - Infeed height: 120mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 60x60mm - Top: toothed feed shaft - Bottom: 2 toothed feed shafts - Feeding belt length: 4100mm - Feeding belt width: 400mm - Auto-reverse - Main motor: 30kW - Feed motor: 2×1.5kW - Machine dimensions (L/W/H): 2300x1550x1500mm - Feeder dimensions (L/W/H): 4400x500x1000mm - Weight: 2135kg Redpfx Adox S Nfysaen ADVANTAGES – Made in Poland – Auto-reverse (adjustable) – Equipped with conveyor belt – DTR documentation – used shredder, very good condition Net price: 76,900 PLN Net price: 18,300 EUR based on 4.2 EUR rate (Prices may vary with significant fluctuations)

Condition: new, Spare parts for Doppstadt Rotaro for sale: - various sieve baskets - 2 pcs of afterpress units Rodpfox Szgijx Adaon - flywheels - control cabinets with Schneider control - control cabinets with frequency inverter

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm Rodpfx Adex Syppsaon - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: refurbished (used), Hosokawa Mikropul ACM 10 fine mill / classifier mill with new control cabinet and accessories We are offering a Hosokawa Mikropul ACM 10 fine mill in very good condition - an ideal solution for the precise crushing and classification of powders and granules. Redpfx Aovn Riasdajn Technical data: • Model: ACM 10 • Motor power: 9.2 kW • Condition: Very good condition (refurbished), with newly built control cabinet Additional details: • Classifying sieve available: A subsequent classifying sieve is also in stock. • Comparable mills: We have similar/analog mills in stock that work on the same principle as the ACM 10. Advantages of the ACM 10: • Compact design: Saves space in production • Energy efficient: Optimized for lower power consumption • Flexible use: For processing chemicals, food, pharmaceuticals and more Condition and inspection: The machine would be ready for use quickly and can be inspected by arrangement. We also offer technical accessories and spare parts for seamless integration into your production. Contact us for more information or a customized offer.

Condition: used, Year of construction: 2013, operating hours: 1,580 h, power: 257 kW (349.42 HP), front tire size: 680/85R32, rear tire size: 540/65R30, Equipment: air conditioning, cabin, HID & header extremity lights / fire-charged Deutsch / ProDrive 20km/h / concave UNI E with W.DEAWN / dual-range cylinder drive / . / cleaning shoe sieve / fan floor protection shield / clean grain P / clutch / FENS Rjdpfsyahcrox Adajn

Condition: new, Year of construction: 2025, New machine made entirely of stainless steel included washing pump - Automatic basket drive - Touch button to turn the basket outside of the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 975 mm - Usable height of the basket to the lower edge of the nozzle holder 450 mm - Flat jet nozzles - washing pressure 3 bar Rsdpfohcpbbsx Adaen - including 20 KG LCT Power Star 50-730 - 24 months guarantee - Shipping is possible

Condition: new, Year of construction: 2025, - Demonstration machine from 2025 completely made of stainless steel including Washing pump - Automatic basket drive - Touch button for turning the basket outside the Cleaning procedure - Tank cover and sieve filter under the basket stainless steel - Protection against dry running - Door security switch - Connections for plate phase separator (oil separator) - Inner basket width 1180 mm - Usable height of the basket to the lower edge of the nozzle holder 675 mm - Flat jet nozzles - washing pressure 4 bar - Return bend as a condenser for little water consumption Rsdpfx Adeg Hgcwjasn - including 20 KG LCT Power Star 50-730 - delivery after receipt of payment within 5 - 6 weeks - 24 months guarantee

Condition: used, Year of construction: 2020, operating hours: 10,150 h, functionality: fully functional, machine/vehicle number: W09D20432L1A65405, power: 515 kW (700.20 HP), first registration: 03/2021, fuel type: diesel, color: green, fuel: diesel, Equipment: additional headlights, air conditioning, all wheel drive, cable winch, compressor, cooling unit, crane, fog lights, hydraulics, parking heater, ALBACH DIAMANT 2000 W09D20432L1A65405 Registration year: 03.2021 Engine: VOLVO PENTA 565kW 760hp Rotor: Generation 6 (12-knifes), 120mm sieve Blower: TYPE 4 Accelerator: Generation 2 Crane: Type S110 F, Epsilon Equipped: DAFO vehicle fire suppression system Engine hours: 10152 h Rsdpjw Uddnjfx Adajn Rotor hours: 4405 h Full maintenance and repair history. Technically clean machine, ready for work w/o investments.

Year of construction: 2007, condition: used, Manufacturer: Pallmann Model: PPSR 10-300 Year: 2007 Type: Contra Selector mill / Fine Impact mill Gentle grinding of dry or wet materials, soft to medium hard. High-throughput cold grinding with fine particle size distribution. Weight : 7000 kg Rotor drive speed: 1590 rpm (110 kW, 380 V, 1500 rpm) Sieve basket speed: 660 rpm (55 kW, 380 volts, 1500 rpm) Impact rotor diameter: Ø 100 cm Screen width: 30 cm Rjdpfsx R D Iyjx Adasn Number of hammers: 60 Pneumatic transfer pickup at machine exit Material : 316L stainless steel Technical documentation available

Condition: used, Manufacturer : Gericke Model : NBS 200/200 Type : Nibbler Year: – Rsdpfx Aex R D Hpjdajn Power motor : 1,1 kW / 1500 RPM Sieve : Ø 5mm Atex : Ex II d IIC T4 Machine size : 60 x 85 x 125 cm Weight : 55kg

Condition: used, Manufacturer : AZO Model: E450 B1 Type : Rotary sieve Application : Control and safety screening Stainless steel Motor power : 1,3 kW Rodpfsx R A U Sjx Adaen ATEX classification: Exe G1-3 Te 30 Capacity: max 6000 KG / H depending on screen size Documentation available

Condition: used, Strainer, flange strainer, filter, coarse or fine sieve -Connection: DN50 -Nominal pressure: PN16 Rodpsd I I Hzefx Adaen -Width: 230 mm -Price: per piece -Number: 2 pieces -Dimensions: 230/165/H225 mm -Weight: 10.8 kg/pc.

Condition: good (used), circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 5 sieve inserts -Type: Perflux for the production of grinding wheels -Sieve inserts: Size 60 my to 2360 my, see photo parts list -Transport dimensions: 1200/800/H670 mm / 1200/800/H800 mm Rodpfxjvgw Rns Adajn -Weight: 115 kg

Condition: used, Container, granule container, storage tank, powder container, storage tank, color powder container -Container: Stainless steel container with sieve insert -Capacity: approx. 500 liters Rjdpep E H Aisfx Adaon -Strainer: Ø 10 mm -Container contents: color powder -Dimensions: 1070/860/H950 mm -Weight: 201 kg

Condition: good (used), Slotted sieve basket, slotted sieve baskets, replacement basket, replacement baskets, separator basket, separator slotted sieve, separator filter grid, separator grid Redpfx Asvpp D Esdaen -Slotted screens for: screw separator -Gap dimensions: 1-2 mm -the item can be sold as a whole or individually -Price on request -various dimensions: -1x: 310/432 mm piece 40 EUR net -1x: 140/1000 mm piece 40 EUR net -1x: 150/1000 mm piece 40 EUR net -1x 315/1000 mm piece 70 EUR net -Complete weight: 44 kg

Condition: good (used), Dirt trap, flange dirt trap, filter, coarse or fine sieve -Manufacturer: ARI, mud flaps -Slanted seat with flanges -Type: JL1040 DN32 PN16 -Connection: DN32 -Nominal pressure: PN16 Redeq Tfgqjpfx Adaon -Quantity: 4 pieces -Price per piece -Transport dimensions: 190/140/H175 mm -Weight: 6.6 kg/pc.

Condition: good (used), circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 15 sieve inserts -Type: Perflux for the production of grinding wheels -Sieve inserts: size 42 my to 250 my, see photo parts list -Screening machine: Dimensions 1530/1000/H2130 mm Rsdevgwycopfx Adasn -Transport dimensions: 1600/1300/H2130 mm -Weight: 414 kg