Used Sieve for sale (340)

Year of construction: 2012, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile Credsz A S Dnspfx Aiiji -Type: G15035-DT -Drive motor: Siemens 2.2 kW -Funnel opening: 620 x 350 mm -Outlet: 350 x 180 mm -Sieve: Hole size 5 mm -Dimensions: 650/630/H1240 mm -Weight: 192 kg

Condition: used, KEK Kemutec rotary screening machine Type: K800 Housing is steel, coated Rotor and sieve basket (4mm) are made of stainless steel Csdpfx Aozh Nmteiisri Completely overhauled and fitted with new bearings, seals, and electric motor See our other listings

Condition: excellent (used), CATALOGUE NUMBER 8038 TECHNICAL DATA - Inlet of the loading hopper: 800x600mm - Outlet for shredded wood: diameter 160mm - Working width of the rotor: 600mm Cjdpfxszkvb Aj Aiijri - Main motor: 15kW - Pump motor: 0.75kW - Tank capacity: 0.4m3 - Number of knives: 14 pcs - Knife dimensions: 30x30mm - Sieve: 15/10mm - Pressing drawer - Electric automatic reversing - Dimensions (L/W/H): 1800x1120x1760mm - Weight: 930kg ADVANTAGES - German production - Pressing drawer - Automatic reversing - Used wood chipper, very good condition Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, Concept Laser Credpfjzh Dp Nsx Aiisi Concept Laser M2 cusing Multilaser Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x 1987 mm (W x D x H) Weight: 2300 kg 2 lasers, 400W each Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible via 2 connections for external N2 generators (optional) Build volume: 250 x 250 x 280 mm (X x Y x Z) Material processed: CL31 / Aluminum-silicon-magnesium alloy (AlSi10Mg) or CL20 / Austenitic stainless steel (316L / 1.4404) Layer thickness: 20-80 μm Production speed: 2-20 cm³ (depending on material and laser power) Operating conditions: 15-35 degrees Celsius Laser usage time Laser 1: 501 hours Laser 2: 503 hours Additional equipment: Lifting device Inox 200 Weight: 102 kg Max. lifting capacity: 135 kg Protection class: IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kW Voltage: 230 V 9.2 A Protection type: IP65 Frequency: 50 Hz Housing: Steel sheet Airflow: 130 m³/h Continuous negative pressure: -145 mbar Short-term negative pressure: -235 mbar Liquid volume: 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current draw: 3A / phase Inert gas: 5 bar Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2005, condition: excellent (used), engine power 55 kW sieve diameter 6 mm Crjdjlx Ndlopfx Aiioi rotor width 450 mm

Condition: used, functionality: fully functional, Vecoplan chipper for lumber shavings 45/16/ 2V - made in Germany - perfect chips directly into the kiln - vibrating system TECHNICAL PARAMETERS: - width 450 mm - height 160 mm - number of knives 2 pieces - engine power 50 kW - rotor diameter 500 mm - rotor length 475 mm - sieve 40 x 40 mm - top pulling gear shaft 4 kW - bottom pulling gear shaft 2.2 kW - reverse - vibrating feeder 10500 mm x 450 mm - motor power 2.2 kW - cross vibrator machine 4500 mm x 2200 mm - motor power 1.5 kW - height 2450 mm Transport dimensions: Crjdpfst Hr Drjx Aiiei 1050 cm x 245 cm x 245 cm weight ~ 4 t

Year of construction: 2024, condition: new, Vibrating screen with a diameter of 1200mm. Two decks screening the material. mesh size to choose from. the sieve can run dry or wet. making the screen of carbon steel or stainless steel. 1.1kw engine 380V 50hz Good quality screening machine at a reasonable price, my sieves are already successfully working in several European countries and customers are very happy !!! available immediately. PayPal payment available!!! Welcome Crjdpfshgv T Uex Aiisi

Condition: like new (used), - made in Germany - new knives and counter-knives TECHNICAL PARAMETERS: - feeding dimension 520x1000 mm - motor power 80 kW - four rows of knives - counter knife - sieve 20 x 20 mm - sieve dimension 1000 x 900 mm - rotor diameter 600 mm Credpfx Aoqy Ek Hsiiei - rotation of shaft 830 rpm Overall dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Condition: excellent (used), Complete contents of protein powder factory which was set up in 2015. All Machinery in lovely condition. Machinery includes Winkworth style mixer, All-Fill pot and bucket filling lines, Pharma Systems capsule and tablet counters, sieves etc. PLEASE NOTE THAT THE LARGE WINKWORTH MIXER IS NO LONGER AVAILABLE. ALL OTHER ITEMS ARE STILL HERE. Cjdpfx Aew Nivljiijri

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,800 kg, color: blue, operation weight: 1,800 kg, empty load weight: 1,800 kg, Year of construction: 2003, Beach cleaning trailer: - Kässbohrer - BeachTech STR 2000 - Year of manufacture 2003 - PTO drive (540 rpm) - Working width 185 cm - Feeler wheels - 543 cm x 230 cm x 210 cm - Empty weight: 1,800 kg; permissible gross weight: 2,800 kg - Area performance: 22,200 m³/h - 30 cm max. working depth - 1.5 m³ collection container can be tilted backwards Crsdpfxevnmg Uo Aiisi - Rake / sieve - Smoother - Working speed 12 km/h - Required tractor: 70 HP Receive all newly listed vehicles by email - sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), Turbo Pulper / Industrial Refiner MANZINI TE30 – Stainless Steel MANZINI TE30 single-stage turbo pulper, designed for the continuous refining, screening, and separation of pulps, purees, and processed food products, separating the usable fraction from skins, seeds, fibers, and other solid residues. Manufactured by MANZINI, the TE30 uses a high-speed rotary system that drives the product against a perforated sieve or screen, allowing for the production of a refined and homogeneous fraction for subsequent processing stages. Its industrial construction in stainless steel, drive by a large electric motor, and continuous operation make it especially suitable for tomato, fruit, and vegetable processing lines. MAIN FEATURES -Manufacturer: MANZINI -Model: TE30 -Type: Single-stage turbo pulper / refiner -Continuous refining and screening process -Separation of pulp and solid residues -High-speed rotary system -Separation sieve / screen -Continuous product feed -Separate discharge of refined product and residues -Construction mainly in stainless steel -Drive by electric motor -Closed processing chamber -Robust construction for intensive industrial use -Accessibility for cleaning and maintenance -Integrable into continuous processing lines PROCESS The previously crushed or prepared product is continuously fed into the MANZINI TE30. Inside, the rotary system drives the product against the screen. The pulp, puree, or refined fraction passes through the perforations, while skins, seeds, fibers, and other larger particles are retained and conveyed to a separate discharge. The equipment can be used for the following operations: Pulping and refining Obtaining pulp or puree Separation of skins and seeds Removal of coarse fibers Screening of product Pre-concentration preparation Refining prior to heat treatment APPLICATIONS Especially suitable for tomato processing industries, fruit and vegetable processors, and manufacturers of purees, pulps, concentrates, sauces, and other food products. Depending on the screen and configuration installed, it can be used for tomatoes, fruits, and various vegetable products, forming part of complete extraction and refining lines. The MANZINI TE30 can be integrated with crushers, mills, preheaters, pumps, evaporators, aseptic sterilizers, and other process equipment. Csdpfx Aiezxcz Eeisri Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Special equipment: automatic oil skimmer Technical data Heatable for aqueous cleaning agents. For the removal of oil and grease contamination in the shortest possible time. Universally applicable for the fully automatic cleaning of small parts from production, manufacturing, and maintenance, such as bolts, sleeves, and ball bearings. 2129905 Easy operation thanks to the fully automatic cleaning process. This allows skilled workers to concentrate on other important tasks. The washing tank is filled with a mixture of water and a water-soluble IBS special cleaner (washing solution). The contaminated parts to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the device is switched on, and the solution in the tank is heated. In the closed device, the basket rotates around its own axis at a constant speed. The pump unit draws the washing solution from the washing tank and pumps it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The parts to be cleaned are intensively blasted with the hot solution from all sides during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the device switches off automatically. ∙∙ 1 pump arranged vertically ∙∙ 3 three-dimensional nozzle tubes made of stainless steel ∙∙ robust stainless steel design ∙∙ additional small parts cleaning basket made of stainless steel (Ø 170 mm) ∙∙ rotating washing basket made of stainless steel, gear rim drive via separate motor ∙∙ intake filter in front of the pump shaft ∙∙ high spray pressure ∙∙ fume extraction ∙∙ stainless steel sieve plate with filter basket Cjdpfx Aiszwb Easieri ∙∙ low water level protection W x D x H (closed): 1130 x 1010 x 1150 mm W x D x H (open): 1130 x 1220 x 1730 mm Usable height: 500 mm Load capacity: 150 kg Basket diameter: 780 mm Washing tank capacity: 85 liters Pump pressure: 3.1 bar Spray rate: 4800 L/h Power consumption: 4.8 kW / 400 V / 50 Hz Weight: 90 kg Temperature: 0-60°C

Condition: excellent (used), Year of construction: 1996, Wood chip screening system Credpfx Aisxn T R Aoiei Manufacturer - Andritz Group, Model: Konewood CS600 Screen capacity: 400-675m3/h Sieving sawdust and shavings from wood chips Conveyors. Steel Structures: – Steel support structures for screens and conveyors – Ladders and walkways for operation and maintenance

Condition: excellent (used), CATALOGUE NUMBER 7725 TECHNICAL DATA - Inlet of the loading hopper: 1200x1000mm - Outlet for shredded wood: ø 200mm - Rotor working width: 980mm - Main engine: 22kW - Number of knives: 24 pcs - Knife dimensions: 30x30mm - Sieve: 16/11mm - Presser drawer - Electric auto-reverse - Dimensions (L/W/H): 2600x2000x1720mm - Weight: 2125kg ADVANTAGES - German-made - Auto-reverse - Presser drawer - Very good condition - Used wood chipper Cjdpfxs Af Ux He Aiisri Net price: 95,900 PLN Net price: 22,300 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary with larger exchange rate fluctuations)

Condition: used, mileage: 726,190 km, power: 309 kW (420.12 HP), first registration: 07/2008, fuel type: diesel, empty load weight: 14,980 kg, maximum load weight: 11,020 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 6,300 mm, loading space width: 2,460 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, cabin, crane, cruise control, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, * German vehicle * Condition, see photos * Atlas Terex, TLC 290.2 E-A3 loading crane at the rear * Radio remote control * Lifting capacity at 10.25 m = 2,400 kg - 8.250 m = 3,000 kg - 6.350 m = 3,990 kg - 4.450 m = 5,860 kg * 3 hydraulic extensions * Load hook * 4-point hydraulic outriggers * Flatbed body with twist locks * Body dimensions: L = 6,300 x W = 2,460 x H = 800 mm * Sieve-printed floor * DIN lashing eyes * Aluminum tailgate * Trailer hitch * Trailer load: 30,000 kg * Permissible total weight: 56,000 kg * Steerable trailing lift axle with raising/lowering function * Active Space cab with a sleeping berth * Air conditioning * Auxiliary heater * Multifunction steering wheel * Differential lock * Cruise control * Electrically tilting cab * Engine brake * Cool box * Driver's seat, comfort, air-suspended * Seat heating * Electric windows * Electrically heated mirrors * Electric sunroof * Radio CD * CB radio * Hands-free system * ABS and ASR * Sun visor Codpfx Aiozrplqsijri * Rotating beacon lights * Wheelbase: 4,800 + 1,400 mm * GVWR: 26,000 kg * Unladen weight: 14,980 kg * Payload: 11,020 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false ideas about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sales and errors excepted.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,840 kg, maximum load weight: 21,160 kg, overall weight: 26,000 kg, axle configuration: 2 axles, loading space length: 12,050 mm, loading space width: 2,550 mm, total length: 12,200 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, transport company Fine-grained steel welded construction, turntable with replaceable 2" kingpin, reinforced mounting point for "gallows" attachment, and with sturdy wear plates all around, attachment rail for aluminum ramps at the rear Outer frame slightly inclined, new design with "Load-Lock profile" for securing lashing straps, "patented Load-Lock cross" for securing lashing straps, in the cross member under the outer frame, 24-ton, two-speed support winch, single-sided operation, with straight lower part, without stroke compensation, free support foot angle or free swivel radius to the rear approx. 1920 mm, without supports, 2 shims with holder, aluminum side impact protection, steel under-run protection, quarter panel fenders in front of and behind each axle, without bull bar, spare wheel holder for 1 spare wheel, with wheel fastening kit, spare wheel, manufacturer same as standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock Axles + Suspension Drum brake axles, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, without steering, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded line routing for easy maintenance, spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve, vehicle stability system Wheels and tires 205/65 R17.5, manufacturer's choice for 8-ton axle load at 80 km/h, steel rims, factory silver Electrical system 24 volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, LED work lights in a curved design (switched via reversing light), if technically possible, additional LED work light at the rear, switched via reversing light Floor Cjdpfx Aiezb Ikfeieri Sieve-printed panels approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5600 kg Front wall / front corner posts 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in full volume design Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: good (used), Sievmaster Flavouring drum Stainless, flavouring drum with sievmaster vibratory sieve, overall length 2000mm, mobile, 3Ph Cedpfxozzf Dus Aiiori

Condition: excellent (used), Complete material drying and feeding system by Motan — ready to connect to injection or blow molding machines. The system includes three integrated components: 1. Material vacuum loader (Motan METRO series) Automatic pellet conveying from bag/bulk bag to hopper Electric motor with vacuum turbine Dust filter and discharge valve 2. Stainless steel drying hopper Conical, insulated stainless steel construction Internal heating element and temperature sensor Estimated capacity: [80 / 120 / 200] liters — to be confirmed 3. Motan LUXOR desiccant dehumidifier (orange cabinet) Twin-tower molecular sieve dehumidification Automatic regeneration cycle Process air temperature: up to 180°C (depending on material) Dew point: −40°C (typical for Motan LUXOR series) Integrated PLC control 380V three-phase Suitable for PMMA, SAN, PC, ABS, PET, PA (nylon), PE, PP, PS and all hygroscopic engineering plastics. Essential for cosmetic, optical, and technical injection molding. Application Pre-drying and feeding of plastic granules to injection molding machines, blow molding machines, and extruders. The system removes moisture from pellets to prevent surface defects (bubbles, streaks, hydrolysis) in finished parts. Technical specifications Brand: Motan (Motan-Colortronic) Model: LUXOR [80 / 120 / 200] — to confirm with rating plate Year: [approx. late 1990s / early 2000s] Voltage: 380V three-phase Origin: Germany Configuration: Complete dryer + hopper + loader Codpfxszhcrve Aiijri

Condition: used, Year of construction: 2002, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 90 kW (122.37 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 90 kW, 400 V/50 Hz Crjdpfswtbyrox Aiioi Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 80 pcs. new Rotor knife shape: blunt knife 60 mm Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Counter knife: yes Hydraulic unit: complete Sieve cassette: screens as per customer request Total weight approx. 10.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

Condition: new, color: other, Field of application: Mining We produce, mobile, primary, primary - secondary or tertiary, impact - crushers. On a trailer, with a hopper, belts, grizzly or wooble feeder, to separate clay and earth from the rock. It can also be a combination of crushers + screen, sieve, with two, three or four deck_ DRY PROCEDURE or WET PROCEDURE. The final products are tampons: 0-30 mm, 0-60 mm or 0-100 mm or asphalt-construction fractions; 0/4, 4/8, 8/11, 11/16, 8, / 16, 16/22, 16/32 mm. The plant is used for work in soft and medium hard rock. Technology has advanced, today they can crush impact crushers even in difficult working conditions. On a tertiary impact crusher in difficult working conditions, the impact hammers can be pre-shredded up to 40,000 m3 of gravel or eruptive stone. The power supply of the plant is via a cable, from a transformer station or via a generator. The size of the plant will depend on the project inquiry . ----- ----- ----- Mining crushing plants are offered, on a trailer; Cjdpfx Aijx D Dcboisri jaw crushers, cone crushers, vertical crushers, all types of separations, DRY PROCEDURE and WET PROCEDURE, with washing. ----- ----- ----- The warranty on the plants is 2 years. We provide service, all spare parts. ----- We offer all technical support on the issue of how correct and economically justified work out some quarry !! Many years of professional experience in surface exploitation in quarries, open pit, of mineral resources.

Condition: like new (used), ROSSI & CATELLI BUTTERFLY P30 Double Turbo Pulper – Stainless Steel ROSSI & CATELLI BUTTERFLY P30 double turbo pulper, designed for the pulping, refining, and continuous separation of fruit and vegetable pulps and purees in industrial processing lines. Its double configuration incorporates two processing stages, allowing for an initial pulping of the product and subsequent refining to obtain a more homogeneous fraction, progressively separating skins, seeds, fibers, and other unwanted solids. The combination of two working units in a single installation is particularly interesting for tomato, fruit, and vegetable lines where a high degree of separation and refining is required before concentration, sterilization, or filling. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Model: BUTTERFLY P30 -Type: Double turbo pulper / refiner -2-stage processing configuration -Continuous pulping and refining of product -Separation of pulp and solid waste -High-speed rotary systems -Separation screens / sieves -Continuous feed -Transfer between the two refining stages -Independent discharge of product and waste -Primarily stainless steel construction -Driven by electric motors -Closed process chambers -Robust construction for continuous industrial production -Integrable into complete processing lines PROCESS The pre-crushed or treated product enters the first stage of the ROSSI & CATELLI BUTTERFLY P30, where the rotary system forces it against a perforated screen. The usable fraction passes through the screen, while the larger solids are separated. The resulting product can then pass to the second stage, where further refining is carried out using a screen with characteristics suitable for the required final product. Credpfx Aiex S Irfoiji This configuration allows for: Pulping Two-stage refining Separation of skins and seeds Progressive removal of fibers Obtaining purees and pulps Homogenization of texture Pre-processing prior to concentration or sterilization APPLICATIONS Particularly suitable for tomato processing industries, fruit and vegetable processors, and manufacturers of purees, pulps, concentrates, and sauces. Depending on the screens installed, it can be used for tomatoes, fruits, and various vegetable products, forming part of industrial extraction and refining lines. The ROSSI & CATELLI BUTTERFLY P30 double-stage configuration provides a particularly interesting solution when progressive and continuous refining of the product is required. Machine available for inspection. Additional technical information, dimensions, photographs, or videos can be provided upon request.

Condition: used, total length: 4,800 mm, total height: 2,800 mm, total width: 2,400 mm, Year of manufacture: 2002 Colour: Grey Empty weight: 3.550 kg Csdsyz Uanopfx Aiieri Price: On request - Year: 2002 - CE marking present: Yes - Serial number: MF038/02 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Rotor width [mm]: 1115 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1500 - Opening width [mm]: 2120 - Opening length [mm]: 1120 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 36 - Transport dimensions: 4800mm x 2400mm x 2800mm (l x w x h) - Transport weight [kg]: 3550kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2025, condition: refurbished (used), functionality: fully functional, Rental Hosokawa Alpine CS 25 compactor system by Alpine Rentals. Technical details Material of construction: - product contacting parts: stainless steel - non product contacting parts: stainless steel/mild steel - non ATEX - Non Pressure Shock Resistant (NPSR) Scope of supply Compactor CS25 with 11kW motor and AFC 200 capable of producing briquettes, granulates, pellets and even be used as a roller crusher depending on the fitted rolls (pending availability). The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industries such as minerals, chemicals, etc. A HOSOKAWA ALPINE Originals machine Csdpfx Aevq Rireiieri Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: electric, color: dark red, overall weight: 38,000 kg, axle configuration: 2 axles, brakes: other, Year of construction: 2026, Mobile vertical shaft crusher is a specially designed mobile stone crushing screening plant on a portable double axle chassis, consisting of feeder bunker, VSI 900 Vertical shaft impact crusher, vibrating screen and conveyor belts. It can be fed directly with the material in stream areas or it can produce sand and gravel from the sieve material in the crushing plants. Credpfjwnp Aksx Aiisi The GNR - MVSI 900 Vertical Shaft Crusher that gives this facility its name; - Maximum feeding size 50-55 mm - Rotor size 900 mm - Engine power 2x200 kW - The capacity 80-210 tons per hour. For more information please call us.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 380 V, temperature: 250 °C, heating capacity: 18 kW (24.47 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 800 mm, filter area: 22 m², energy consumption: 22 kWh, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual shipping quote. ✅ Complete Package for Professional Powder Coating ✅ Brand new, unused industrial products ✅ Proton Maschinenbau GmbH is the exclusive authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also inquire about current stock availability. 🔥 PROMOTION ONLY UNTIL 06.06.2026 🔥 Package list price (net): €19,570.00 Promotional discount: 15% = €2,935.50 Cjdpfewc En Esx Aiisri ➖➖➖➖➖ ⭐ Mini Powder Coating System – MINIPBMAT-2-S COMPLETE STARTER KIT FOR PROFESSIONAL POWDER COATING! With the MINIPBMAT-2-S you receive a compact complete system consisting of an electric powder oven, powder booth, and multicolor powder coating gun set. Ideal for workshops, small production areas, and companies looking to enter professional powder coating with a manageable investment. ☘️ Compact ☘️ Economical ☘️ Ready to Run ✅ Complete package of 3 machines ✅ Powder oven + powder booth + powder gun ✅ Attractive promotional price only until 06.06.2026 ✅ Ideal for small and medium-sized workpieces ✅ Perfect for entry-level, expansion, or small series production ✅ Everything from a single source – with Proton service and Matech quality ➖➖➖➖➖ Package contents: ✔️ 1 x Matech Electric Powder Oven MATOVENB-101610 ✔️ 1 x Matech Powder Booth MATBOOTH.FT.02-S ✔️ 1 x STR-ELITE Multicolor Powder Coating Gun Set ➖➖➖➖➖ Technical Highlights: ♨️ MATOVENB-101610 Electric Powder Oven ✔️ Electric heating capacity: 18 kW ✔️ Total power: approx. 19.5 kW ±10% ✔️ Digital temperature control up to 220°C ✔️ Fan capacity: 1,500 m³/h ✔️ Timer function and automatic shut-off 🎨 MATBOOTH.FT.02-S Powder Booth ✔️ 2 polyester filters ✔️ Extraction capacity: 2,800 m³/h ✔️ 2.2 kW extraction fan ✔️ Workpiece guide into the booth ✔️ Suitable for concentrated coating applications within the booth 🔫 STR-ELITE Multicolor Powder Coating Gun Set ✔️ Multicolor version ✔️ AOS Automatic Optimization System ✔️ 4-mode memory function ✔️ Powder coating performance: max. 450 g/min ➖➖➖➖➖ ⚙️ Optional Extensions Available 🎨 Options for Matech Powder Booths: ✅ Nano filter box – enables operation without a fixed exhaust duct ✅ Base frame with sieve powder recovery system ♨️ Options for Matech Powder Ovens: ✅ PID temperature control for precise temperature management ✅ Touchscreen interface and smartphone control ✅ Ramp-heating mode for defined temperature profiles ✅ Storage of process parameters ✅ Weekly & monthly reports at the push of a button ✅ Insert shelf system or workpiece trolley ✅ Upper rail system for the oven ✅ ATEX version of the oven available on request ✅ Double-sided door design / front and rear doors ✅ Cart/trolley for the rail system ✅ Support feet for the rail system ✅ Custom dimensions available on request Rails and carriers are not included in the price. ➖➖➖➖➖ 🚀 Secure the promotional package now! This offer is only valid until 06.06.2026. After that, standard package prices apply. ✳️ We offer various financing models. Please contact us for leasing, hire-purchase, or installment payment options. Request your quote now – get your business ready for professional powder coating!