Used Shoe Sorter for sale (435)

Condition: excellent (used), CATALOG NUMBER 7854 Technical data: - belt length: 2515x152 mm - belt width: 150 mm - oscillation - vertical oscillation movement - sanding length: 790 mm - table size: 840x300 mm - worktable for contoured elements: 300x250 mm - worktable adjustment: 80 mm - motor: 2.2 kW - sanding unit adjustable angle: 90-45 degrees - sanding head adjustment: 0-45 degrees - extraction port diameter: 100 mm - dimensions (length/width/height): 1450/600/1230 mm - weight: 138 kg ADVANTAGES – with oscillation – with shoe – suitable for contour and straight sanding – unit can operate vertically and horizontally – unpainted – used sander, very good condition Kwjdeyh H A Djpfx Ahvow Net price: 3,900 PLN Net price: 930 EUR (depending on the 4.2 EUR rate) (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations) Kedpoyh H Aqsfx Ahveww

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. Kwjdpfx Asyltvbjhvow We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: excellent (used), power: 122 kW (165.87 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 8,582 h, Equipment: air conditioning, Year of manufacture: 2017 Empty weight: 25.000 kg Dimensions (LxBxH): 889 x 298 x 308 cm Engine type: Caterpillar C4.4 Mast: articulated arm Quick coupler system: Yes CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Central lubrication - Hammer/sorting function - Hydraulic quick coupler - Radio - Rotation function - Two Speed - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: Japan Condition CE type: CE Ksdew U Df Ejpfx Ahvoww OQ70/55 Oilquick quick coupler, 600 mm track shoes, bucket with teeth, transport width 300 cm

Condition: good (used), Year of construction: 2003, overall weight: 1,900 kg, Paoloni Kalibra 30 - maximum sanding width 110 cm - one 15 kW motor - first unit with a metal roller, - second unit with a grinding shoe and a rubberized roller - shoe control from the table - weight 1900 kg. The machine works very well. Kodpfx Asrumipshveww

Condition: used, Year of construction: 1992, used wide belt sander MS95-150 incl. conversion Technical data: Year of manufacture: 1992 Manufacturer: Johannsen The machine is under power and can be inspected by appointment! Table size approx.: 2360 x 950 mm Sanding belt height approx.: 1000 mm Max. sanding area: 2000 x 850 mm Passage under sanding belt: approx. 340 mm Throat approx.: 550 x 310 mm Belt speed: 11 + 22 m/sec Belt drive motor: 4 / 5.5 kW Belt dimensions: 150 x 7000 mm Max. table load: 80 kg – Table may only be adjusted when unloaded – Extraction nozzle left, horizontal, D: 180 mm Required extraction capacity/h, min.: 2400 m³ Operating voltage: 400 V, 50 Hz Kodpsyfga Tsfx Ahvjww Machine color: RAL 6011 reseda green Manually operated For processing steel, stainless steel, and brass Not suitable for aluminum and titanium Machine equipped as follows: Double-sided throat Pole-changeable belt drive motor Laminated wood table slats Contact roller sanding unit complete with rubber contact roller D 100 x 145, approx. 50° Sh Additional sanding shoe approx. 150 mm long with bracket for mounting in the U-bracket

Condition: used, Pressing area: approx. 2,800 x 1,000 mm Kwodsviwqmjpfx Ahvew Press cylinders: 6 Heavy-duty pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders. One cylinder without pressure shoe.

Condition: used, Year of construction: 2017, functionality: fully functional, The bankruptcy administrator is offering for sale: MHS (VanRiet) Sorter – dismantled and prepared for transport E-commerce parcel sorter manufactured by VanRiet (Van Riet Material Handling Systems BV). Disassembled and ready for transport. The sorter includes: a) three roller conveyor lines with 72 shipping stations; b) one roller conveyor line; c) a removal line (belt conveyor) for excess cartons running parallel to each shipping line (3 lines) and the returns line (1 line); this leads outside the building to a compactor container (the container is not part of this listing); d) one chute line for parcels to 46 locations, equipped with a scanner for determining the size and weight of individual parcels. The sorter has a throughput of up to 6,000 parcels per hour. The valuation includes additional photographic documentation illustrating the technical condition of the appraised items as well as detailed components of the sorter. The sorter operates by assigning and preparing parcels for shipment to specified courier companies. Goods should be packed either in a box or polybag. An operator scans the goods and prints a label for each box or polybag. Information about the box/container is sent from the sorter to the MHS (VanRiet) controller. Meanwhile, the operator loads the box/container onto the loading line. Products are conveyed downstream, then merged onto a single conveyor line. At the merger point, a scanner equipped with a camera identifies the item, measures its dimensions, and the product is then sorted to its designated output (pickup location for ready-to-ship parcels). Kwedpewaimyefx Ahvjw The MHS (VanRiet) sorter is suitable for handling products of various dimensions. It handles cartons with the following range of sizes: length 150–800 mm, width 100–600 mm, height 10–400 mm, and weight from 0.25 kg up to 32 kg. Polybags with the following range: length 200–550 mm, width 150–550 mm, height 13–400 mm, and weight from 0.25 kg up to 10 kg. The MHS (VanRiet) sorter processes up to 6,000 parcels per hour, with shipments sorted into one of 46 directions. A diagram showing the general layout of the sorter is provided below. Lines 1–3 are outbound shipping lines, and line 4 (added in 2020) is used for processing returns.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Kedpfsqabm Eox Ahvoww Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment • Soundproof enclosure • Safety guard Kwsdpjyk Empsfx Ahvjw • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Price: €290,000 excl. VAT, shipping, and disassembly.

Condition: good (used), Year of construction: 2008, Biesse STREAN B1/8.0 Single-Sided Edgebander, Year 2008 - Code 0000015: Y-axis CNC with infeed guide - Code 0000011: Right-angle panel inserter - Code 0000517: Automatic lubrication C1 - Code 0000017: Parallelogram workpiece support 5.5–8.5 - Code 0000439: B1 installation kit with panel return device - Code 0000136: Liquid jet application unit - Code 0000669: RT20 pre-milling unit, 2×3.5 kW, 9000 rpm - Code 0000336: Additional pair of diamond cutters, H=60 - Code 0000469: SP20 glue spreading unit - Edge thickness: 0.3–3 mm - Bswyjukh Tqjhhpkswt (term seems corrupted, clarification needed) - Wood thickness: 20 mm Kwjdpexala Tofx Ahvsw - Panel thickness: 10–60 mm - Code 0000244: Y-axis CNC for pressure zone - Code 0000682: Two-position edge magazine for SP10 and SP20 - Code 0000144: Additional glue pot - Code 0000367: IT90-S end trimming unit, 2×0.3 kW, 12000 rpm - Code 0000704: Solid wood edge kit up to 20 mm thickness for IT90 - Code 0000711: 3-position pneumatic kit for IT90 - Code 0000151: RS10 flush trimming/pre-milling unit – straight tool, L=20, 2×1.3 kW, 12000 rpm - Code 0000901: Increased straight tool (L+30, solid wood) for RS10 - Code 00000152: 2.4 kW motors for RS10 flush trimming unit – straight tool L=30 - Code 00000536: Automatic 2-position adjustment for RS10 - Code 00000158: RF=40 angle trimming unit, 25° bevel, R=1.5/2/3 mm, 2×0.65 kW, 12000 rpm - Code 0000651: Copying shoes for RF10-RF30-RF40 groups - Code 0000579: AR30 multifunction corner rounding unit, R=2 mm - FAST system with 2 pre-selection positions via control panel - 2×0.35 kW, 12000 rpm - Code 0001017: 4-position pneumatic system for AR30 - Code 0000165: RB10 edge scraper group, R=2 mm - Code 0000652: Copying shoes for RB10-RB30-RB40 groups - Code 0001004: RC20 glue scraper group - Code 0000171: SZ30 superimposed oscillating brush group, 2×0.18 kW, 1400 rpm - Code 0000989: Liquid jet application kit for SZ30, SZ60 - PH10 edge band pre-heater WITHOUT PANEL RETURN

Condition: excellent (used), functionality: fully functional, Odenberg / Tomra Potato Sorting Line Brand: Odenberg / Tomra Control System: “Tomra” Touchscreen Panel Technical Specification: Kodpfx Aeyku I Nehvsww - Optical Sorter: Odenberg with mechanical finger ejection system - Infeed Hopper: steel construction, with side and top inlets - Conveying System: rising inclined conveyor belt, overhead feed conveyor belt - Water Section: 2 submersed conveyor belts - Feeding Section: cross-flow feed with vibrating grate and conveyor belt - Installation footprint: Total usable floor area: 10,500 x 4,750 mm Set includes platforms with slatted flooring An advanced potato sorting line based on Odenberg and Tomra optical technology, providing a complete solution for modern processing facilities. At the heart of the system is a precision optical sorter with mechanical ejection, operated by the intuitive Tomra interface, enabling rapid product selection by quality and size. A unique feature of the line are the two underwater conveyor belts, ensuring extremely gentle handling of the produce and minimizing bruising and mechanical damage.

Condition: excellent (used), Raimann KS 310 BV edger multisaw - year of manufacture 1995 - German production - DTR - two movable discs TECHNICAL PARAMETERS: - track width 340 mm - cutting height max 120 mm - engine power 30 kW - disc diameters 250/360 mm - Possibility to put on a shoe - electric height adjustment Kwsdpjir Eubjfx Ahvew - feed continuously adjustable 11-38 m / min - power of the feed motor 1.5 kW - two movable discs - three lasers - max element width 1000 mm - minimum element length 600 mm with a shoe 400 mm - four upper pressure rollers - spindle diameter 65 mm - sleeve diameter 80 mm - spigot diameter 250 mm Dimensions 230x220x230 weight 2500 kg

Year of construction: 2022, condition: good (used), functionality: fully functional, This is a drying and disinfection system for boots and shoes from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social rooms. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely using ozone and therefore does not require any chemicals. Simultaneous drying takes place using warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimum air circulation. Warm, dry boots increase the well-being of your employees and prevent illness through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED APPLIANCE SERVICE FOR YOU - 6-month warranty on all electrical parts - High-quality brand appliances at fair prices - Professional overhaul / inspection & expert cleaning - Tested & fully functional - or money back - Flexible choice of shipping or collection - Expert advice - before and after purchase - Provision of operating instructions, connection diagrams & spare parts - Inspection according to DGUV V3 Technical data: - External dimensions WxDxH: 360x470x1950mm - Electrical connection: 230V, 50Hz, 0.55kW - Serial number: 2893/22-60623 - Year of construction: 2022 - Capacity: 5 pairs of shoes Condition: Used, tested and fully functional VERSAND / SHIPPING: - Delivery or collection by arrangement - Worldwide shipping on request / Worldwide shipping on request - Shipping to islands or mountain stations by arrangement only Kwjdpfx Ahott Sf Eevew Do you have any questions, would you like advice or would you like to view something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Condition: excellent (used), functionality: fully functional, Odenberg / Tomra Potato Sorting Line Optical sorter manufacturer: Odenberg Control system: Tomra (touch panel) Total operational area: 10,500 × 4,750 mm The line includes: - Odenberg optical sorter with a mechanical finger ejection system - Tomra touch control panel Kwsdjykmf Hspfx Ahvjw - Steel hopper with side/top infeed - Inclined feeding belt conveyor - Elevated feed conveyor - 2 underwater conveyor belts - Cross infeed section with vibrating screen - Discharge belt conveyors - Operator platforms with slatted flooring A complete potato sorting line designed for industrial sorting of raw material using optical technology. The Odenberg sorter, combined with the Tomra control system, enables precise product selection based on quality, color and potential defects. The mechanical finger ejection system ensures efficient and rapid separation of unwanted elements from the main product. The line is equipped with a complete system for feeding, conveying, and discharging potatoes, including underwater conveyor belts and a vibrating screen section for initial separation.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, grinding width: 650 mm, Equipment: type plate available, Kündig Botop, sanding unit on top roller, pneumatic shoe, sanding unit on bottom roller, pneumatic shoe. Machine has been completely overhauled, new carpet, new rollers. Kjdevmt D Repfx Ahvsww

Condition: excellent (used), Sorting, feeding and capping machine Cap application and screwing station without filling station Kwedoqazcgspfx Ahvow Fully automatic filling and capping system by feeding a filling unit with filling needle Cap sorter and capper for lids and caps up to Ø 20 mm Mode of operation When the machine is started, the caps and lids aligned in the sorter are fed under the capping and screwing heads using a feed system. Cappers include screw cappers for screw caps and lid pushers for stoppers and caps 3 x spiral feed bowls for bottles, stoppers and caps 1 x capping station 1 x cap placement station Container height 55 mm Container diameter 20 mm Cap diameter 20 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, mileage: 519,563 km, power: 353 kW (479.95 HP), first registration: 08/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, * Engine D2676LF07, 480 HP, EURO 5 SCR, 2300 Nm * ZF 16 S 252 OD manual transmission * 400 l fuel tank right side + 35 l AdBlue * Front axle VOG?09 / VP?09 driven * Parabolic springs front, 9.5 t * Water cooler & charge air cooler for high temperatures * Trapezoidal rear springs 16 t * Double rear axle installation ----Instruments & Cab* "Base-Line" instrument panel? * Adjustable steering wheel * MAN BrakeMatic * Brake shoe width RA 220 mm * Rear axles AP HPD?1382/1352 * Axle ratio i = 4.33 * Rear differential lock * Front differential lock with warning buzzer * Limited steering capability with FA?lock ----Wheels & Tyres* 11.75-22.5 rims on both front axles * 9.00-22.5 rims on both rear axles * Spare wheel 9.00-22.5 ----Cab & Comfort* Cab M (2240 mm wide, 1880 mm long) * Comfort seat covers * Driver comfort seat, air-suspended, ventilated, heated, with lumbar support * Passenger seat static * Internal-release front flap * Two additional vehicle keys * Washable interior door panels ----Engine & Auxiliary Components* Visco fan * Electronic engine management * PTO parameterization * PTO without flange * Tank guard * Fuel filter + filter heater ----Drive & Transmission* Engageable front-wheel drive * Transfer case G172 * Hydraulic/electric cab tilt device ----Heating & Air Conditioning* Eberspächer D4S auxiliary heater * Automatic air conditioning ----Air, Exhaust, Intake* Raised air intake * Fine dust and pollen filter * 1-cylinder air compressor * Raised exhaust right * Tailpipe manifold for raised exhaust ----Brakes & Safety* Engine brake EVBec * Flame start system * Single-plate clutch MFZ 430 * Raised axle vents * Foldable rear underrun guard * No front underrun guard * No side protection device * Three-part steel bumper * RINGFEDER 5050 A trailer coupling * Crossbeam for trailer coupling * Body mounting brackets * Spare wheel holder Kjdpsyi Rvmofx Ahveww * Immobilizer * Emergency steering pump * Multifunction steering wheel * ABS * Drum brakes front and rear * 2-line brake coupling * Pneumatic parking brake front ----Access & Lighting* Step to body on fender * Entry lighting * Driver seat armrests * Fly screen * High construction * Air-suspended cab mounts * Note: Reduced comfort due to trapezoidal springs * Lockable tank and AdBlue caps * Headlight range adjustment * Work light left * Additional high beam and fog lights * H7 halogen twin headlights * Position and marker lights * Reading lights * Preparation for cargo area lighting * Central locking * Protective cover for tail light * Electric dual-tone horn ----Electrics & Controls* MAN Tronic on-board computer * Display languages German & English * TollCollect pre-installation * ABS trailer socket * 24V 7+7-pin trailer socket * 12V/24V sockets in cab * 2× 175 Ah batteries * Battery box * Alternator 28V 80A * Operating data display * Reversing alarm switchable * Electronic speed limiter 89 km/h * Cruise control * Boost pressure gauge * Car phone antenna * CB radio antenna * Radio MAN BasicLine * Radio pre-installation * 2 halogen roof beacons * Rotating beacons yellow ----Chassis & Stability* Stabilizer on both rear axles * Front axle stabilizer * Air dryer * Frost protection down to -27 °C ----Interior* Tinted windows * Rear wall of cab without window * Seat belt indicator * Manual sunroof * Electric windows * Sun blind * So

Condition: used, BOGMA wide belt sander, Kodoxrzudopfx Ahvoww Type: KFY-M Number: A0091 2 aggregates: first rubber roller, second sanding shoe

Condition: excellent (used), Belt grinding machine HOLZKRAFT LBSM 2505 - used - Grinding belt cover, Right-/left-hand rotation, Swiveling grinding unit ----- Technical data ----- Table size: 2,400 x 800 mm, Kwjdpfsyfwcrex Ahvsw Throat depth: 650 mm, Motor: 3 kW, Grinding belt dimensions (LxW): 150 x 6,400 mm Quality information: - Belt tracking checked - Grinding shoe checked - Height adjustment checked - Grinding table guide checked - Complete basic cleaning performed - Electrical system checked - Immediately ready for operation

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 202102, type of input current: three-phase, power: 5 kW (6.80 HP), input voltage: 230,400 V, Comec Moulding machine for pressing and moulding Shoe insole parts Kwedsyizl Sjpfx Ahvjw

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 71 or SS 56 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. Kwedpjw Eu Akofx Ahvew 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS-F 125 Forestry Mulcher / incl. rotary actuator / NEW / in stock & available immediately Price: €28,390.00 net / €33,784.10 gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 780 kg - Mulcher attachment for excavator mounting, suitable for mulching along riverbanks, in forests, next to railway tracks, and other hard-to-reach areas - Mulches bushes and wood up to 20 cm diameter - Suitable for excavators from 10-20 tons - Compatible with various mounting plates - Drive designed for hydraulic motor depending on carrier’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid shoes, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools Kodpsyii T Ijfx Ahvjww OPT 228 Rotor with fixed MINI DUO tools (2 carbide inserts) - 27 pieces, spare part number 176.02.005 OPT 465 M-BOOST Bent-axis piston motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood A separate hydraulic unit is recommended for operation. The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. The unit is supplied without hoses, couplings, and mounting plate. We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. We have a very large selection of various Seppi M. products in stock and ready for immediate delivery! Mr. Herden (phone) is happy to assist you. We are happy to provide a financing offer upon request. We are official sales and service partner for Magni telehandlers, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Westtech, JCB construction machinery, Mercedes-Benz, and Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! Empty weight: 780 kg Please contact Marius Herden for further information...

Condition: good (used), KEN 2311-HOS Laboratory washer-disinfector KEN 2311-HOS is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and double-door (pass-through) models. Pass-through machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. Kwjdpfx Ajiuzkmjhvow If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), KEN 2311 Laboratory washer-disinfector KEN 2311 is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard Kjdpfx Asiuzlvshveww ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instruments to test the unit further and Therefore, this unit is being sold as it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!