Used Shoe Sorter for sale (442)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Lukovica
18,342 km
Contact grinding machine
LFA Machines
Call
Condition: good (used), Year of construction: 1999, functionality: fully functional, Through-feed sander top and bottom, width 300 mm. Roller, roller-shoe.
Bcsdpfx Aaeyc Nfyjfsu
Listing
Weiterstadt
18,574 km
Machining center
HURCOVMX 30
Call
Year of construction: 2004, condition: excellent (used), TECHNICAL DATA
Travel X 760 mm
travel Y 510 mm
travel Z 610 mm
table clamping surface 1020 x 510 mm
T-slots / table 5 x 18 mm x 100 mm
distance spindle to table min./max. 150/762 mm
Spindle mounting steep taper DIN 69871 ISO 40
spindle speeds 10 - 10'000 rpm
Drive power (30 min/const. ED) 11 kW
Torque max. 236 Nm
Power constant from 500 rpm
Coolant tank 190 l
Ball bearing linear guide in X,Y,Z axes
Eilang X / Y / Z 30 / 30 / 20
feeds programmable 3,0 - 7600 mm/min
positioning accuracy +/- 0,01 mm
repeatability +/- 0,005 mm
milling feed rate 3,0 - 11400 mm/min
table load 1000 kg
Automatic tool changer (double arm) 24 stations
Max. Tool diameter 80 mm
Max. tool length Tool length 300 mm
Max. Tool weight 7 kg
Machine weight 4700 kg
Space requirement L x W x H (footprint) 3870 x 4170 x 2775 mmINCL.
- Coolant system
- Coolant spray gun
- Chip splash guard cabin
- Flushing system to support chip disposal
- Machine light
Bjdpfxjl Tpmdo Aafecu
- set of machine shoes
- rigid thread cutting
- spiral conveyor in the chip room
- Pocket milling with islands
- Electronic handwheel
- ULTIMAX 4 control
- 2 VGA color screens (text + graphics)
- 2 software units (1 x plain text dialog programming + 1 x for ISO code programming) via interface RS-232 C / V24 access for CAD / CAM or external programming station
- Pentium technology, 1.6 GB hard disk, 64 MB RAM, parallel and serial data interfaces, DOS compatible 3.5 '' 1.44 MB drive. System internal self-diagnosis, DOS directory structure, software version 2.xx Servo technology DUAL DSP 40MHz
Listing
Sierakowska Huta
17,772 km
Wide belt sander 130 with 2 units
EUMUCOVENUS 2RK 1300
Call
Condition: excellent (used), Catalogue number 7871
TECHNICAL DATA
- Maximum workpiece width: 1300mm
- Maximum workpiece height: 170mm
2 sanding units:
1) Grooved rubber roller for calibration
2) Grooved rubber roller + segmented shoe + metal roller
– From above:
2 pressure feed rubber rollers
First unit:
- Pressure rubber roller
Second unit:
Bodpfsx U Urqjx Aafscu
- Pressure rubber roller
- Cleaning brush
- Pressure rubber roller
– From below:
- 3 slip rubber rollers
- Conveyor belt
- 3 slip rubber rollers
- Pneumatic belt oscillation with photoelectric sensors
- Electric table elevation
- Pneumatic brake
- Stepless feed speed adjustment via gear motor
- Vacuum pump
- Main motor: 15kW
- Feed motor: 1.5kW
- Pump motor: 4.6kW
- Working pressure: 6-8bar
- Extraction port diameters: 2x150mm, 2x80mm, 4x70mm, 120mm
- Overall dimensions (L/W/H): 1700x2250x2400mm + pallet
- Transport dimensions (L/W/H): 1700x2250x2140mm + pallet
- Weight: approx. 2000kg
ADVANTAGES
– Made in Italy
– 2 sanding units
– Segmented shoe
– Vacuum pump
– Not repainted
– Used sander, in very good condition
Net price: 39,900 PLN
Net price: 9,500 EUR (depending on the exchange rate of 4.2 EUR)
(Prices may change with significant fluctuations)
Listing
Miechucino
17,764 km
Weinig Unimat 23 four-side planer
WeinigUnimat 23
Call
Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer
- German production
- grooved top
- year of production 1996
- pulling rollers in the table top
Bcsdpfx Ash Dwl Djafou
TECHNICAL PARAMETERS:
planed width 230 mm
planing height 160 mm
grooved top
spindle diameter 40 mm
1 lower spindle 7.5 kW
2 right spindle 7.5 kW
3 left spindle 7.5 kW
4 upper spindle 11 kW
5 lower spindle 7.5 kW
feed smoothly adjustable 6-36 m / min
5.5 kW feed motor power
six top steel pulling rollers
two upper rubber pulling rollers
three pullers in the table top
pneumatic feed pressure
pneumatic shoe clamp
spindles with brakes
pre-table length 1970 mm
electric height adjustment
central lubrication (split)
diameter of nozzles 140 mm
dimensions of the machine (length / width / height) 410/200/180 cm
weight ~ 3000 kg
Listing
Idstein
18,570 km
Horizontal machining center
AverexHS-540i GTS 2 APC
Call
Condition: new, Year of construction: 2025, AVEREX HS-540i GTS 2-APC, New Machine
Horizontal Machining Center with the option to adapt an
optional pallet rotary magazine (6-APC or 8-APC)
Standard equipment
- AVEREX MPro1 (FANUC 0i-MF Plus)
- 15" color LCD display, MANUAL GUIDE i, QWERTY* keyboard
- iHMI – Intelligent Human-Machine Interface
- Program memory with 2 MB and up to 1,000 programs
- 4-axis simultaneous operation (X, Y, Z, B)
- AICC II Control with 200-block Look Ahead function
- HRV3+ servo drives (digital servo current control)
- JERK Control (jerk regulation)
- Fine Surface Technology (High-Speed High Quality)
- Extended workpiece coordinate system G54.1 P1 - P300
- Workpiece coordinate system G52 - G59
- Memory card (PCMCIA Flash Card) and USB slot
- Network interface RJ45, Embedded Ethernet
- Enhanced embedded Ethernet
- Week timer: Auto. Power On/Off for the machine
- High-speed skip function
- Tool Offset Memory C
- 400 pairs of tool corrections
- 1,000 storable programs
- Programmable data input (G10)
- Programmable spindle load monitoring M37/M38
- Tool life management
Bcodpfxowxdpgj Aafeu
- Extended macro variables (#100–#199, #500–#999)
- Program restart
- Helical interpolation
- Cylindrical surface interpolation (G07)
- Fixed drilling cycles
- Synchronous tapping (G84/G74)
- Rigid tapping with bell-shaped acceleration/deceleration
- Programmable mirroring, scaling
- Polar coordinate programming (G15/G16)
- Chamfering or rounding corners (,C / ,R)
- Optional skip blocks, up to 9
- User-defined macro programming
Axis Travel
- Travels X/Y/Z: 800/800/860 mm
Speeds
- Rapid traverse X/Y/Z: 74/74/74 m/min
- Feed rate during milling: 0–40,000 mm/min
- Rapid traverse B: 66.6 min-1
- 1G+ acceleration
Pallet Changer
- Rotary changer
- Number of pallets 2-APC: 2 (machine / setup station)
- Pallet size: 500 x 500 mm
- Hole grid: 5 x 5 M16 x 25 mm deep, 100 mm pitch
- Loading capacity: 550 kg per pallet
- Workpiece size 2-APC: Ø800 x H1,000 mm
- Workpiece size 6-APC/8-APC: Ø800 x H900 mm
- Mechanical locking of pallet clamping
- Pallet clamping force: 9.8 kN x 4 cones (39.2 kN)
- Pallet height from floor: 1,100 mm
- Standard preparation for retrofit of 4-way pallet storage (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets)
High-Speed Tool Changer
- Tool holder: BBT-40 (optional SK-40 DIN69871 or HSK-A63)
- Number of magazine positions: 80
- Max. tool diameter: Ø95 mm
- Max. tool diameter with adjacent spaces free: Ø185 mm
- Max. tool length: 400 mm
- Max. tool weight: 8 kg
- Type: Fixed place / random
- Speed: 16 s for 80 tools
- Tool change time: 0.9 s / 2.1 s (heavy tool)
- Chip-to-chip time: 3.0 s / 3.5 s (heavy tool)
Spindle
Rotary Axis
- Manufacturer: PARKSON™
- Axis: full 4th axis
- Max. rotation: 66.6 rpm
- Indexing: 0.001°
- Clamping torque: 5,000 Nm
- Holding torque: 1,973 Nm
Linear Guides
- Manufacturer: THK™
- Width: 45 mm
- Guide shoes X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm
Ball Screws
Coolant, chip, and compressed air management
Listing
Aach
18,687 km
Machining center
DECKEL MAHODMC 635 eco
Call
Condition: reconditioned (used), CNC vertical machining center "DECKEL MAHO DMC 635 eco"
With path control Siemens 810 Powerline
Bsdpfxsuqmvks Aafecu
Year of construction: 2010
Travels: X 635 Y 510 Z 460
Speed range: 20 - 8,000 rpm infinitely variable
With the following accessories:
Rigid angled table 790 mm x 560 mm clamping surface
Vertical tool changer with 20 magazine positions
Electronic handwheel
Heidenhain TT 140 tool length measuring system
Fully protected cabin with sliding doors and interior lighting
Coolant device
Signal light 4 colors
Chip conveyor
Chip flushing gun
3 pcs. Height-adjustable machine shoes
Operating instructions
Listing
Aach
18,687 km
Universal milling and drilling unit
KUNZMANNWF 4/3
Call
Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3
With 3 axes Heidenhain digital readout
Year of construction: 1996
Travels: X 400 Y 320 Z 400
Speed range: 40 - 2550 rpm
With the following accessories:
Rigid angle table 800 mm x 360 mm clamping surface
Mechanical handwheels for X , Y , Z axis
Hydraulic tool clamping
Automatic central lubrication pump for X , Y , Z axis
Machine light
4-piece machine shoes
Bcedpfxeq Ulucs Aafeu
Coolant device
Operating instructions
THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!!
THE MACHINE IS IN GOOD CONDITION !!!
Listing
Aach
18,687 km
Machining center
DECKEL MAHODMU 50 M
Call
Condition: reconditioned (used), Year of construction: 2001, Universal milling & drilling machine DECKEL MAHO DMU 50 M
With control Heidenhain TNC 320
Year of construction: 2001
Travels: X 500 Y 400 Z 400
Speed range: 20 - 4,500 rpm infinitely variable
With the following accessories:
Manual swivel rotary table with digital display for C + B axis
700 mm x 500 mm clamping surface
Electronic handwheel for X , Y , Z axis
Splash guard cabin
Machine light
4 pcs. Height-adjustable machine shoes
Coolant device
Operating instructions
Bcodpfx Aaeuw Sd Isfsu
Listing
Aach
18,687 km
Machining center
MIKRONVCP 800 W
Call
Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W
With path control Heidenhain iTNC 530
Year of construction: 2002
Travels: X 800 Y 650 Z 500
Speed range: 0 - 20,000 rpm infinitely variable
With the following accessories:
Rigid angular table 900 mm x 600 mm clamping surface
Vertical tool changer with 30 magazine slots (HSK 63)
Fully protected cabin with sliding doors and interior lighting
Bsdeviq U Ejpfx Aafjcu
Electronic handwheel
Tool measurement in the work area ( BLUM laser )
3 D measuring probe infrared Renishaw
Chip conveyor
Coolant device
4 pcs. Height-adjustable machine shoes
Operating instructions
Listing
Aach
18,687 km
Lathe - cycle-controlled
WEILERE 35
Call
Condition: reconditioned (used), Year of construction: 1995, CYCLE LATHE WEILER " E 35"
With 2 axes Siemens Sinumerik 805
Year of construction: 1995
Spindle bore: 54 mm
Center distance: 950 mm
Rotation O over bed: 410 mm
Speed range: 4 - 3000 rpm
Bcedpfx Aajuzyw Djfou
With the following accessories:
PARAT tool holder with 8 pcs. inserts
Chuck guard
3 Jaw chuck 0 200 mm
4 jaw chucks 0 200 mm
Fixed lynette 12 - 150 mm
Chip collection tray
Chip guard with lighting
Coolant device
4 pcs. Height-adjustable machine shoes
Operating instructions
Listing
Nattheim
18,550 km
Edgebander
SCMOlimpic K 800
Call
Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit.
Bjdpsx Twdtefx Aafjcu
Listing
Nattheim
18,550 km
Horizontal panel saw
SCMGabbiani P80
Call
Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control...
Bcsdpfx Asx Twcvoafou
Listing
Sierakowska Huta
17,772 km
Wide belt sander
STEMACLCRT 900
Call
Condition: excellent (used), CATALOG NUMBER 7773
TECHNICAL DATA
- Max width of workpiece: 900mm
- Max height of workpiece: 160mm
– Top:
- Metal pressure roller, slip type
I unit – Calibrating rubber grooved roller
II unit – 2x Metal calibrating roller + shoe
– Bottom:
- Feed belt
- Pneumatic oscillating belt
- Electric table lifting
- Main motor 15kW/11kW
- Feed motor 1.5kW
- Operating pressure 6-8 bar
Bcodjxnynuepfx Aafsu
- Dust extraction port diameter 2x200mm
- Dimensions (L/W/H): 1850x1950x2040mm
- Weight approx. 3000kg
ADVANTAGES
– Italian manufacture
– Calibrating sander + pad
– Used sander, very good condition
Net price: 15,900 PLN
Net price: 3,780 EUR (at 4.2 EUR exchange rate)
(Prices may change with significant fluctuations)
Listing
Kaunas
17,395 km
Wide Belt Sander
CB2NRT1100
Call
Condition: used, Year of construction: 1998, functionality: fully functional, Used Wide Belt Sander CB 2NRT1100 for sale! Available immediately!
Year of production 1998
Working width 1100mm
Calibrating unit with a rubber shaft
Combi aggregate with metal shaft and shoe
Pneumatic oscillation
Pneumatic shoe
2 strokes
Element thickness gauge
Electronic material thickness display
Bjdpfxsya Ui Es Aafecu
Listing
Sierakowska Huta
17,772 km
Wide belt sander
BUTFERING ECO 950
Call
Condition: excellent (used), Catalogue number 7431
TECHNICAL DATA
- Max workpiece width: 950mm
- Max workpiece height: 150mm
Top:
- Metal pressure roller
- Unit (profiled rubber roller for calibration + pad shoe + metal roller)
- Smooth, metal sliding roller
Bottom:
- Feed belt
- Pneumatic oscillation of belts with photocells
- Electric table lifting
- 2 feed speeds
Bjdpjx Tgt Defx Aafecu
- Main motor: 7.5 kW
- Feed motor: 0.6 kW
- Table lifting motor: 0.18 kW
- Working pressure: 8 bar
- Extraction connection diameter: 150mm
- Dimensions (L/W/H): 1600x1250x2000mm
- Weight: 1109 kg
ADVANTAGES
– German manufacturing
– Additional pad shoe included
– Used sander, in very good condition
Net price: 23,900 PLN
Net price: 5,690 EUR (at exchange rate 4.2 PLN/EUR)
(Prices may change depending on exchange rate fluctuations)
Listing
Lüdenscheid
18,526 km
Tool and Cutter Grinder
SAACKEUW I D
Call
Condition: excellent (used), Year of construction: 2007, 5 controlled axes: X, Y, Z, A, and B
Fully automatic grinding wheel changer
NUM Axium Power 1050 control system with PC
TOOL DATA
Max. diameter: Ø 250 mm
Bodpfx Aaoxt N Izofecu
Max. diameter for complete machining: Ø 250 mm
Max. length for complete machining (from front edge of workpiece support): 430 mm
Max. tool length between centers: 480 mm
Center height: 195 mm
X-axis grinding travel: 625 mm
Z-axis cross slide travel: 305 mm
Y-axis vertical slide travel: 305 mm
All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust recirculating roller shoes on hardened rails.
GRINDING HEAD, B AXIS
Swiveling range in the horizontal plane: 240°
Rotational speed: 120°/s
Liquid-cooled motor spindle: 150 x 150 mm
Grinding wheel mount with automatic quick-clamping system HSK - C/E 50
Spindle speed infinitely variable: 2,000 - 10,000 rpm
Max. grinding wheel diameter: 150 mm
Grinding wheel changer with 4 magazine slots
Second probe arranged on the workpiece holder for automatic grinding wheel measurement, including software
CHAIN LOADING MAGAZINE with PICK-UP arm
Capacity: 160 tools
Maximum workpiece diameter: 32 mm
Maximum workpiece length: 200 mm
Maximum tool weight: 2.5 kg
CNC-controlled steady rest
TURBO separator (filter system)
Listing
Raasdorf bei Wien
18,141 km
Long belt grinder
LangzaunerLZG-S 10/7/14
Call
Condition: excellent (used), Year of construction: 1996, LANGZAUNER LZG-S 10/7/14
Table size: 2,500 x 1,000 mm, belt length: 6,800 mm
Description:
- Electric table height adjustment
- Sanding belt cover
Bjdoya Nbiepfx Aafscu
- Central, clearly arranged control panel
- Workpiece illumination
- Right / left rotation
- Motor brake
- Adjustable workpiece stop
- Removable table insert
- Suitable for sanding drawer fronts
- Sanding table guidance with hardened and ground guiding shaft
- Enclosed belt drive pulley
- Dust-tested
- CE version
----- Technical Data -----
Throat depth: 1,000 x 350 mm
Motor 400 V: 5.5 kW
Removable table insert: 510 x 630 mm
Sanding shoe: 320 x 150 mm
Table height adjustment range: 350 mm
Ball bearings per side: 6-fold
Belt speed: 22 m/sec
Extraction nozzle Ø: 180 mm
Weight: 900 kg
Listing
Waiblingen
18,599 km
Lead/traction spindle lathe
ColchesterMASTER 3250
Call
Condition: good (used), Used COLCHESTER MASTER 3250 center lathe and feed spindle lathe
center height 170mm
center distance: 650mm
spindle bore: 42mm
Bcodpfx Aaeuqkf Nefju
Infinitely variable speed from 15-3250 rpm
1 x SCHUNK wedge bar lathe chuck Ø160mm
1 x MULTIFIX steel holder size B with 4 inserts
Machine light, chuck protection electrically fused,
machine shoes
1 x rotating center point,
1 x rotating center point with pressure indicator
1 x drill chuck with tapered arbor
The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.
Listing
Chiampo
18,614 km
Textile printing machine
FIORETTOISM98HT
Call
Condition: like new (used), Year of construction: 2023, operating hours: 700 h, functionality: fully functional, The ISM 98HT pneumatic hot stamping machine for finished shoes can be used to stamp the company logo and numbering onto the sole of finished shoes, boots, or sandals before packaging.
This machine ensures high-quality marking thanks to the following automatic systems:
- All machine parameters are set through a fast and intuitive Omron touchscreen keyboard.
- Automatic adjustment of the logo penetration depth (in millimeters) into the material.
- Stamping temperature, stamping duration, and advancement of the colored tape (in millimeters) are set via the Omron touchscreen keyboard.
- Stamping head descent cylinder (1.5 tons of force) with mechanical limit switch.
- Die holder with six slots, each rotatable 360°.
- Optical LED light projector.
TECHNICAL DATA:
Bcjdeyaq Uqspfx Aafou
Dimensions: 75 x 75 x h 210 cm
Net weight: 300 kg
Compressed air: 8 bar
Voltage: 400V, 50-60Hz
Productivity: 200 pairs/hour
This MACHINE is being decommissioned because the activity is no longer handled in-house. It was purchased for a temporary project (4 months). Therefore, its condition is nearly new.
Listing
Włocławek
17,795 km
Roller grader for root crops
Santorsortownik
Call
Year of construction: 2014, condition: good (used), machine/vehicle number: ONK25SR/4/1, Vegetable sorter / grader with sorting range from 1cm to 10cm and above
Bedpfx Aaswzwi Sjfecu
Listing
Juszczyn
17,874 km
Wide belt sander
SCMSandya CLK
Call
Condition: excellent (used), functionality: fully functional, SCM Sandya CLK Wide Belt Sander + Vacuum
Working width: 1100 mm
Working height: 3–160 mm
Number of units: 2
Calibration roller: rubber
Combi unit with shoe
Bcjdpfsx Svvfex Aafsu
Extraction ports: 2x 160 mm
Sample images of the machine
Trust Seal
Dealers certified through Machineseeker

Listing
Marxen
18,250 km
Agricultural machine
T660i Pro Drive
Call
Condition: used, Year of construction: 2013, operating hours: 1,580 h, power: 257 kW (349.42 HP), front tire size: 680/85R32, rear tire size: 540/65R30, Equipment: air conditioning, cabin, HID & header extremity lights / fire-charged Deutsch / ProDrive 20km/h / concave UNI E with W.DEAWN / dual-range cylinder drive / . / cleaning shoe sieve / fan floor protection shield / clean grain P / clutch / FENS
Bcjdpfsyahcrjx Aafsu
Listing
Miechucino
17,764 km
OTT ALPHA 110 wide-belt sander
OTTALPHA 110
Call
Condition: excellent (used), Year of construction: 1996, OTT ALPHA 110 wide-belt sander
- machine in stock
- after the technical review
- very good condition
- German production
- year of production 1996
- segment shoe - a perfect solution for varnish / veneer
TECHNICAL SPECIFICATIONS:
- grinding width 1100 mm
- grinding height 1-150 mm
- combi unit with task-controlled membrane sanding shoe
- engine power 11 kW
- blowing on the belt
- pneumatic oscillation
- two types of belt speed 4.5 and 18 m / s
- aggregate with felt roller
- engine power 0.75 kW
- shaft oscillation
- aggregate with a cleaning brush
- engine power 0.75 kW
- smoothly regulated feed
- feed speed range 4-18 m / min
- 1.5 kW feed motor power
- electric height adjustment
- vacum table
- 3kW fan motor power
- diameter of nozzles 4 x 120 mm and 1 x 150 mm
Transport dimensions:
- length 200 cm
- width 245 cm
- height 210 cm
- weight 2500 kg
1. The Alpha Combi aggregate is a grinding unit with a contact shaft with a diameter of 150 mm and a hardness of 90 shor. It is integrated with a sectional pneumatic shoe with a section width of 27 mm
2. EMS 27 optical system - detects minimal unevenness and adjusts the pressure force of a particular section of the shoe at a given point of the ground element.
Bsdpfx Aasgi Dryjfjcu
3. It is possible to control the individual sections of the shoes adjacent to each other in the range -2 to +4 -
Listing
Heilbronn
18,589 km
Walking floor semitrailer
STASbioSTAR 91,3 cbm
Call
Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 09/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,550 mm, Equipment: ABS, bioSTAR 91.3 cbm
Basalt Grey
Chassis Type: Moving Floor
Kingpin Load (National, t): 12
Axle Load (National, t): 8
Axle Spacing (mm): 1310-1310
Fifth Wheel Height (mm): 1150
Chassis Width (mm): 1200
Loading Width (mm): 2475
Chassis Series: 135
Gross Vehicle Weight (technically permitted): 39 = 12 + 9 + 9 + 9
Wheelbase (WB) Moving Floor Trailer (mm): 7850
Internal Height Front (mm) (IHF): 2641
Internal Height Rear (mm) (IHB): 2821
Loading Length (mm): 13513
Volume (m³): 91.3
Overall Width (mm): 2550
Overall Length (mm): 14000
Chassis
Tyre Size: 385/65R22.5
Chassis Neck Height (mm): 217
Axles: JOST
Brake Version: Disc Brakes
Brake Type: JOST - DCA-T7
Offset (ET): 120
Option 1st Axle with Traction Aid
Traction aid optimised with activation via push button in the truck (installation of button not included in scope of delivery) and by pressing the brake pedal three times
Option 3rd Axle: Without
Brake Pad Wear Indicator: Connected
Tire Pressure Monitoring: Wabco TrailerPulse
Air Suspension: ECAS with raise/lower valve
Lowering of air suspension via Smartboard, as well as raise/lower valve
Coupling Head Pneumatic: European palm coupling
Wheels: Speedline Diamond
Wheel Nut Caps: Chrome with STAS logo
Landing Gear: Weweler steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation, and 2 speed stages
Underrun Protection Operation: Fixed underrun bar
Lighting Manufacturer: Aspöck
Lighting Type: EUROPOINT III – LED
2 pcs. LED reversing lights, rear, installed left and right on lamp bracket
Work Lights (operated via switch): 2 pcs. LED reversing lights, front, left and right in direction of travel, mounted in the area of the landing gear
Hydraulic Coupling: Rotary coupling
Hydraulic Coupling – Position: Connection point at front wall (additionally with connection possibility at landing legs)
Hydraulics positioning: pressure back, pressure left, return right (CON)
Air connection in the toolbox
Aluminum access ladder 3.80 m – right-hand side in direction of travel
Broom and shovel holder, three holders each, mounted on chassis, left-hand side in direction of travel
Moving Floor System: Brand Cargo Floor
Air/electric console centrally mounted in direction of travel, with support bracket
Lighting unit protection: one-piece splash guard
Body
Front wall angle (°): 90
Rear wall angle (°): 90
Rear wall type: Swing doors
Bcsdsxdqbkopfx Aafeu
A-panel: Folding on the rear wall, mounted right in driving direction
Cover plate between floor and front wall: Fixed aluminum plate and PVC strips
Fifth Wheel Plate Type: Standard
Front wall profile: 3 mm - 2 mm
Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick
Wear plates: Rectangular 1500 x 1000 x 4 mm
Floor system operation: Radio remote control
Cargofloor Control Type: CF 500 SL-C - E-CONTROL
Floor profile type: 8 mm ribbed
Moving floor closure plate: Stainless steel
With additional plastic guides below the floor profiles
End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps
Oil temperature sensor for moving floor system
Residue-free discharge wall
Rear wall: Aluminum
Swing door version: split 1/2 to 1/2, with transverse door header
Door wing opening: right door wing opens first (STAS manufacturer’s choice)
Transverse door header: swivel version
Door header material: Aluminum
Rear door locking: 1x swivel bar per door half
Listing
Naprawa
17,865 km
Wide belt sander
A. COSTAELEKTTRA OK 1150
Call
Condition: used, Technical specifications:
Working width: 1150 mm
1 combined unit with pneumatic shoe
Pneumatic shoe lift mechanism
Paper/air blow-off
Support foot before first roller
Paper break protection with raised component
6 speeds for the sanding unit
Roller diameter: 140 mm
Bcsdpfx Aaox Uz Dyjfou
Maximum workpiece height: 160 mm
Sanding belt dimensions: 1140x1400 mm
Feed belt speed: Variable
Extraction port diameter: 160 mm
Electric height adjustment
Analog display
Safety switch
Main motor power: 9 and 11 kW
Voltage: 380 V
Overall dimensions:
Length: 1900 mm
Width: 2400 mm
Height: 2180 mm
We make it easier for you to find: "shoe sorter"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Shoe Sorter (442)
Search Machineseeker now with more than 200,000 used machines:Browse through the most popular machine descriptions:
This may be of interest to you























































































































































































































































