Used Colorization for sale (7,416)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: SG47E1P001, working width: 3,200 mm, TECHNICAL DETAILS Printing/substrate width: max. 3.20 m Printing technology: HP Latex, water-based latex ink Printing inks: 6 colors (C, M, Y, K, Lc, Lm) MACHINE DETAILS Connected power: 11 kW Frequency: 50 / 60 Hz Voltage, 3-phase: 200–240 V / 380–415 V Current consumption, 3-phase: max. 48 A / 30 A Voltage, 1-phase: 240 V Current consumption, 1-phase: max. 63 A Energy consumption during operation: 11 kWh Energy consumption in standby mode: 0.2 Wh Operating altitude: max. 2,000 m EQUIPMENT Integrated curing/drying system Gedpfx Akjzyappe Ueug Certifications: CE, CSA, EAC, KCC, FCC Part 15 Class A, VCCI-A

Condition: excellent (used), Year of construction: 1998, operating hours: 61,000,000 h, functionality: fully functional, machine/vehicle number: 201810, color channels: 2, paper weight (min.): 50 g/m², paper weight (max.): 280 g/m², paper width (min.): 520 mm, total length: 290 mm, total width: 190 mm, total height: 170 mm, space requirement width: 300 mm, space requirement height: 220 mm, counter reading (black): 61,000,000, counter reading (color): 61,000,000, year of last overhaul: 2025, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, Heidelberg Speedmaster SM 52-2-P offset printing press for sale, manufactured in 1998, currently in daily production and available for inspection and live demonstration. Configuration * 2 printing units + perfecting device (1/1 or 2/0) * Maximum sheet size: 370 × 520 mm * Total impressions: 60,956,393 * AutoPlate semi-automatic plate changing system * Heidelberg Alcolor dampening system * Technotrans refrigeration unit for the dampening solution * Continuous feeder * Electronic side lays * CP Tronic control console * Automatic ink key presetting from the CP Tronic console * FullWash automatic washing system for the plate cylinders and ink rollers (blanket washing unit not installed) * Replaced cylinders Technical Condition * The press is currently in daily production and can be inspected while running. * Original Heidelberg ink and dampening rollers were replaced approximately 2 years ago (invoice available). * The machine runs perfectly and produces commercial print jobs every day. * Sold complete with a Plate Punch & Bender. Automatic Washing Systems The press is equipped with automatic washing systems for: * Impression and transfer cylinders; * Ink rollers. The blanket washing units are not installed. Documentation * Original purchase invoice available. * Original Heidelberg manuals and tools. * Original electrical diagrams. Terms of Sale * VAT invoice will be issued. * Dismantling, loading and transportation are the buyer’s responsibility. Ideal for Printing * Flyers * Brochures * Business cards * Folders * Forms * Labels * Commercial print jobs * High-quality promotional materials This press is an excellent choice for print shops looking for a reliable Heidelberg offset press with low operating and maintenance costs. Price €17,500 (VAT included). Gjdpfx Aezrr U Uek Uoug

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, total length: 495 mm, total height: 520 mm, total width: 457 mm, construction height: 300 mm, construction width: 240 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system will be available from November 2026! TECHNICAL DETAILS Build volume X-axis: 330 mm Godpfezx S D Ajx Ak Ujug Build volume Y-axis: 240 mm Build volume Z-axis: 300 mm Filament diameter: 2.85 mm Nozzle diameter: 0.25 mm, 0.4 mm, 0.8 mm Printing speed: < 24 mm³/s XYZ resolution: 6.9 / 6.9 / 2.5 µm Layer resolution with 0.25 mm nozzle: 60–150 µm Layer resolution with 0.4 mm nozzle: 20–200 µm Layer resolution with 0.8 mm nozzle: 20–600 µm MACHINE DETAILS Technology: Fused Filament Fabrication (FFF) Print head: Dual extrusion print head with automatic nozzle lift system and interchangeable print cores Supported materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway Operating temperature: 15–32 °C Relative humidity during operation: 10–90 % RH, non-condensing Non-operating temperature: 0–32 °C Supplied software: UltiMaker Cura, Cura Connect Supported operating systems: macOS, Windows, Linux Plugin integration: SolidWorks, Siemens NX Supported file types: STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG Printable formats: G, GCODE, UFP Connectivity: WLAN, LAN, USB Display: 4.7 inch (11.9 cm) color touchscreen Monitoring: Live camera Operating noise: 50 dBA Build plate temperature: 20–140 °C Build plate leveling: Active leveling Nozzle temperature: 180–280 °C Nozzle preheating time: < 2 min Build plate preheating time: < 4 min from 20 °C to 60 °C Power consumption: 500 W Dimensions & Weight Machine dimensions: 495 × 457 × 520 mm Machine dimensions with Bowden tubes and spool holder: 495 × 585 × 780 mm Net weight: 20.6 kg Shipping weight: 29 kg Shipping carton dimensions: 650 × 600 × 700 mm FEATURES Dual extrusion print head Automatic nozzle lift system Interchangeable print cores Heated glass build plate Heated aluminum build plate PEI build plate Active build plate leveling Abrasion-resistant dual-gear feeder NFC scanner for material recognition Color touchscreen Live camera Spool holder with material guide Print Core AA 0.4 mm, 2 pieces Print Core BB 0.4 mm, 1 piece Nozzle cover, 3 pieces Power cable User manual CE marking

Condition: used, Year of construction: 2000, Format: 370 x 520 mm Gusdpfszzzt Sjx Ak Ujg Equipment: Alcolor Automatic film dampening Autoplate: semi-automatic plate change system All manuals, tools, accessories Technical details: Maximum sheet size: 370 x 520 m Paper thickness range: 0,03 - 0,5 mm - Max. speed Plusversion

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available Gusdpfozmh Awjx Ak Usg - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: good (used), Year of construction: 1989, functionality: fully functional, Machine in good condition to be used, ready to work. We are a printing company, we aren't machine dealers. Video of the machine in operation available. THE PRICE IS NOT NEGOTIABLE. THIS IS THE PRICE OF THE MACHINE INSIDE OUR WORKSHOP. THE PRICE MACHINE THE PRICE DOES NOT INCLUDES DISASSEMBLE, TRANSPORTATION, OR TAXES. If you want a specialized mechanic to disassemble the machine and put it inside a container for you, it would incur an EXTRA COST of 3000€. Gjdpfjxqfgzox Ak Ueug WHEN CONTACTING US, PLEASE PROVIDE US WITH A PHONE NUMBER WITH WHATSAPP, REMEMBER TO INCLUDE THE PREFIX OF YOUR COUNTRY.

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Gsdpfx Aezzrmpok Usug Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be arranged by the buyer! The unit will be available from October 2026! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible Print Cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90 % RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90 % RH, non-condensing Placement: Away from direct sunlight Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Weight in operation: approx. 17 kg EQUIPMENT Dual-extrusion print head Guodpfxozx S Dvj Ak Ujg Automatic nozzle lifting system Interchangeable Print Cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cable Ethernet cable USB stick User manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: used, Year of construction: 2006, The equipment detailed here is a Sakurai 566 SD, manufactured in 2006. This model has dimensions of 660 x 508 mm and has produced approximately 85 million impressions. It is currently in production and located in Germany. The Sakurai 566 SD is equipped with several advanced features, including a Streamfeeder and the Sakurai Olivermatic Alcohol Dampening System, which enhance its efficiency and print quality. It also includes a delivery system and supports CIP 3 standards. This machine boasts a maximum speed of 15,000 impressions per hour, making it a high-speed option for large-scale printing tasks. Additional features include the SIS (Sakurai Interactive System), SCC (Sakurai Color Control), QSS (Quick Standby System), and SAS (Sakurai Auto Set), all of which contribute to its advanced capabilities and ease of use. These specifications make the Sakurai 566 SD a robust and efficient choice for high-volume printing operations. Format: 660 x 508 mm Equipment: Streamfeeder Gedpfszncmmsx Ak Uoug Sakurai Olivermatic - Alcohol Dampening System delivery CIP 3 Max Speed: 15,000 iph SIS Sakurai Interactive System SCC Sakurai color control QSS quick standby system SAS Sakurai Auto Set

Condition: used, Year of construction: 1989, functionality: fully functional, MONTHLY OFFER: This machine needs to be sold!!! Heidelberg GTO 52-1 Colors: 1 Year: 1989 Dampening system: Kompac Maximum format: 520x360 mm (20x14 inches) Current status: In stock Impressions: 39 million Guedpozzd Swefx Ak Usg Availability: Immediate Location: Italy SPECIAL PRICE (for quick confirmation): €3,000 (Loaded)

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 21-06-12-054, functionality: fully functional, operating hours: 385 h, actuation type: electric, Equipment: CE marking, saw blade guard, scorer, Available from April 1, 2027, for self-disassembly and self-collection. The machine features ProDrive control with a 3.5" color display and a separate keyboard. The height and swivel adjustment of the saw unit are motor-driven. The CNC-controlled parallel fence enables a cutting width of 1,300 mm. Equipment / technical data: • Machine height 910 mm • Control panel at eye level • ProDrive control with 3.5" color display • Main motor 5.5 kW (7.5 hp) VARIO Gsdpoz Ah E Rjfx Ak Ueug • Stepless speed control, approx. 2,000–6,000 rpm • Saw unit that can be swiveled to one side, 0–46° • Extended cutting height for saw blade diameters up to 500 mm • AKE quick-change system for the main saw blade • 2-axis scoring unit • Motorized height and lateral adjustment of the scoring unit • Scoring unit motor 0.75 kW / 8,200 rpm • LED lighting in the area of the scoring unit • Table extension 840 mm • Double roller carriage 3,800 mm with floor support • On/off switch on the double roller carriage • Angle miter fence, length stop up to 3,500 mm • Two individual folding stops • Extendable cross slide extension, extendable to 650 mm • CNC parallel fence, cutting width 1,300 mm • Travel speed of the parallel fence 250 mm/s • Automatic dimension correction depending on the fence profile • Front support roller, 300 mm wide • DUPLEX 1350 mm double-sided miter fence • Template holder directly on the control panel • 99 storable cutting programs • Operating hour counter • USB interface • 400 V / 50 Hz Special equipment: 3,800-mm double roller carriage, CNC parallel fence 1,300 mm, 2-axis scoring unit, VARIO drive, and the DUPLEX miter fence. Inspection and test run possible by appointment.

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. Gsdpfex Syghex Ak Uoug It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). Gedpfx Aozwgxrek Usug • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Condition: used, Year of construction: 2006, Format: 375 x 520 mm Printing Area: 365 x 505 mm (14.37 x 19. Min. Size: 375 x 520 mm (14.76 x 20. Max. Size: 100 x 150 mm (3.94 x 5.91 Min. Paper Thickness: 0.04 to 0.6 mm (0.00 Max. Paper Thickness: 0.04 to 0.6 mm (0.00 Speed: Up to 15,000 sheets per Power: 16 kw Net Weight: Approx. 7,000 to 8,400 kg Measurements: L 4,545 mm W: 2,240 mm H Equipment: RYOBI PCS-H Printing control system RYOBI PDS-E Printing Density Control System High pile delivery RYOBI-matic continuous dampening system Technotrans cooling and circulation device Guedpfx Akjzwf Ulj Ujg Automatic ink rollers, blanket, impression washing Semi-RPC: Semiautomatic plate changer Powder spray device: Grafix Digital 3000 Double sheet detectors (mechanical/electronic) Electronic missing sheet detector Suction tape feeder board Plate register remote control device (vertical, la Preset functionality Stream feeder Plate punch

Condition: good (used), functionality: fully functional, Heidelberg GTC Die-Cutting Press – 60 tons of die-cutting pressure Industrial classic | extremely robust | comprehensive accessory package For sale is an original Heidelberg GTC die-cutting press, one of the most powerful and robust die-cutting machines from Heidelberg. The year of manufacture and operating hours are not documented (typical for this machine generation), but the condition is functional, complete, and exceptionally well-equipped. Special feature: 60 tons of die-cutting pressure The GTC clearly distinguishes itself from other Heidelberg die-cutting presses (e.g., GT / T / smaller models): ➡ 60 tons of die-cutting pressure instead of the usual approximately 40 tons. This makes the machine ideally suited for: Gsdpfx Akjyc Hnfs Ujug • Thick cardboard • Multi-layer materials • Demanding die-cutting and scoring jobs • Tools with high surface pressure _____ Equipment & Scope of delivery • 3 die-cutting frames, including o 1 frame with a 340 mm milled recess (ideal for special tools / larger formats) • 2 die plates in different thicknesses • Comprehensive accessory and spare parts package (see pictures) • Spare parts list available – a significant advantage for operation and value retention • Original Heidelberg mechanics (robust, durable, easy to maintain) _____ Typical areas of application • Die-cutting and scoring • Format die-cutting • Small and medium-sized series • Packaging, cardboard, technical die-cut parts • Ideal for workshops, processors, and specialized companies Conclusion The Heidelberg GTC is not a museum piece, but a real production tool. With 60 tons of die-cutting pressure, several die-cutting frames, die plates, plenty of accessories, and a documented spare parts list, this machine offers an exceptional overall package for professional users.

Condition: used, Year of construction: 2016, Format: 1250 x 2500 mm Equipment: Number of ink cartridges: 8 Color channels: 8 Number of printheads: 16 Type of input current: Alternating current (AC) Total weight: 1,410 kg Gjdpfxoyx Hu Sj Ak Usug

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 50 kg, power: 1.1 kW (1.50 HP), tank capacity: 10 l, Material Conveying Unit Simar FX 2504 Motor Power: 1.1 kW (brushed motor) Power Supply: 230 V / 50 Hz Container Capacity: approx. 5 litres Conveying Performance: approx. 150 – 200 kg/h (depending on material) Gsdpfx Aoy Hlv Rek Ujug Maximum Conveying Distance: approx. 15 – 20 meters Pipe/Hose Diameter: 38 mm (DN 38) Housing Material: Polished stainless steel Colorant Doser Simar FDX-2 Drive Type: Stepper motor (high RPM repeatability) Power Supply: 230 V / 50 Hz Speed: Infinitely adjustable (depending on control unit, typically 0.1 – 200 rpm) Color container capacity: approx. 5 – 10 litres

Condition: ready for operation (used), Year of construction: 2011, operating hours: 7,308 h, functionality: fully functional, machine/vehicle number: KJFE012284, number of ink cartridges: 11, color channels: 11, number of print heads: 1, resolution (max.): 28,801,440 dpi, paper weight (min.): 80 g/m², paper weight (max.): 500 g/m², paper width (min.): 200 mm, paper width (max.): 1,120 mm, paper height (min.): 127 mm, paper height (max.): 15,000 mm, number of feeding trays: 3, total length: 1,864 mm, total width: 667 mm, total height: 1,218 mm, space requirement length: 1,900 mm, space requirement width: 710 mm, space requirement height: 1,250 mm, counter reading (color): 3,422, year of last overhaul: 2026, type of input current: AC, input current: 1 A, input voltage: 240 V, Equipment: raster image processor, For sale is an Epson Stylus Pro 9900 SpectroProofer with an integrated X-Rite SpectroProofer powered by X-Rite. This is a 44" wide-format, fine art, and proofing printer from a professional photo studio, in well-maintained condition and ready for immediate use, with a current service report dated July 23, 2026. The unit is ideally suited for fine art printing, photographic printing, proofing, graphics and pre-press, advertising technology, CAD/GIS, as well as high-quality poster and art prints, also for museums, galleries and professional photographers. The model uses the proven Epson UltraChrome HDR-11 color pigment ink system and achieves a print resolution of up to 2880x1440 dpi. It handles media up to 44 inches (111.8 cm) wide and paper thicknesses up to 1.5 mm. The printer is ideal for photographers, print service providers, artists, advertising technology or fine art printing. A total of only 3,422 prints have been made. The printer is being sold due to the business owner's retirement. Technical data: - Manufacturer: Epson - Model: Stylus Pro 9900 + SpectroProofer (X-Rite) - Print width: 44" (111.8 cm) - Printing technology: Epson MicroPiezo TFP - Ink system: UltraChrome HDR (11 colors) - Maximum resolution: 2880x1440 dpi - Roll and single sheet feeder - LAN network connection (cables for connections available) Gjdsznmiljpfx Ak Uoug - Weight: approx. 116 kg Scope of delivery: - Epson Stylus Pro 9900 + SpectroProofer (X-Rite) - Roll holder - Catch tray - Power cable - Available accessories (paper rolls of any quality, canvas rolls) - Partially used ink cartridges (depending on the fill level) - 11 ink cartridges (see photos) in original packaging, unopened Condition: The printer is in good condition and was operated only by professional staff in a canton-wide recognized photo store and regularly serviced, most recently in July 2026 (service record available). The operational condition can be inspected on-site at any time by appointment, and a function test can be performed. Location: Visp, SWITZERLAND Loading: Loading can be assisted upon agreement. Worldwide transport is possible, but must be organized by the buyer. Local pick-up is preferred. Private sale. No guarantee or return. Price: 3,250 Euros

Condition: like new (used), functionality: fully functional, Optical Sorter / Color Detector PROTEC BICS 2000 40C – Stainless Steel The PROTEC BICS 2000 40C optical color sorter is designed for the inspection, sorting, and automatic rejection of products based on color differences within food processing lines. The equipment allows for the analysis of the product as it passes through the inspection zone, detecting units, particles, or materials that do not meet the established color parameters. Non-conforming products can be automatically separated from the main flow, improving the uniformity and quality of the final product. Its configuration with a feeding system, optical inspection zone, and automatic rejection mechanism enables continuous operation on industrial sorting lines. MAIN FEATURES - Manufacturer: PROTEC - Model: BICS 2000 40C - Type: Optical sorter / color detector - Application: Automatic sorting and classification - Product inspection using optical technology - Detection of color differences - Automatic separation of non-conforming products - Continuous industrial processing - Product feeding and distribution system - Optical inspection zone - Automatic ejection / rejection system - Construction primarily in stainless steel - Integrated control panel - Configurable selection parameters - Hygienic design for the food industry - Integrable into automatic processing lines PROCESS The PROTEC BICS 2000 40C is designed to automatically inspect the product as it passes through the equipment. Guedeynkdnspfx Ak Ueg The product is distributed in a controlled manner before passing through the optical inspection zone, where the system analyzes its color characteristics and compares them with the previously established parameters. When out-of-specification product is detected, the rejection system automatically separates it, allowing the accepted product to continue to the next stage of the process. This system can be used for: - Color sorting - Removal of defective product - Separation of units outside specifications - Improvement of product uniformity - In-line quality control - Automatic classification APPLICATIONS Particularly suitable for processors of fruits and vegetables, legumes, nuts, frozen products, and other food industries that need to automate visual product selection. Depending on the installed configuration, it can be used for different solid and particulate products where color is a relevant parameter for determining their quality or classification. The combination of PROTEC technology, optical sorting, and automatic rejection provides an efficient solution for improving quality control in food processing industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 1999, Format: 520 x 375 mm Equipment: Min. sheet size 100 x 150 mm Max. printing area 505 x 350 mm Up to 13,000 (in some cases up to 15,000) sheets per hour Paper thickness 0.04 to 0.4 mm (maximum 0.5 mm) Plate size 510 x 400 mm (or 510 x 430 mm) Machine weight approx. 7,000 kg PCS-H control system Gusdpfxozi D Ino Ak Uog Ryobimatic dampening system SAPC (Semi-Automatic Plate Change) Automation: Typically equipped with an automatic blanket and roller washing system. Delivery Techtrans New

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 1 kW (1.36 HP), Simar FX 2004 Material Handling Device Gujdsy Hldnopfx Ak Ueg Motor power: approx. 0.9 – 1.1 kW (brush motor) Power supply: 230 V / 50 Hz Container volume: approx. 3 – 4 liters Conveying capacity: approx. 60 – 100 kg/h Hose connection diameter: 38 mm (standard) Filtration: Polyester filter with automatic cleaning Simar FDX-2 Dye Dosing Unit Drive type: Stepper motor (high rotational speed repeatability) Power supply: 230 V / 50 Hz Speed: Continuously adjustable (depending on the control unit, typically 0.1 – 200 rpm) Dye container capacity: approx. 5 liters

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, total length: 2,868 mm, total height: 2,102 mm, total width: 1,960 mm, overall weight: 2,200 kg, Hello, we are selling several 3D printers from an insolvency estate. All are professional-grade devices from the automotive development and design sector. This listing features the Stratasys Objet 1000 / J4100 from 2013. The printer underwent a mechanical overhaul by Stratasys in 2025 and was updated to the latest standards electronically and in terms of software. This upgrade cost approximately EUR 135,000. Guodpoz Ahq Tofx Ak Ueg Accessories such as a replacement print bed with a mobile lifting frame and various spare parts are included. Consumables can be purchased additionally at a favorable price. This is a stereolithography printer, meaning liquid resin is cured using UV/laser technology, creating the component layer by layer with extremely high detail, precision, and excellent surface quality. Thus, it is an absolute professional-grade device that can, for example, print multi-colored automotive lights with a clear glass appearance. A new device in this print volume size currently costs well over EUR 350,000 (net). Technical data: Build volume/build size max: 1,000 × 800 × 500 mm Layer thickness up to 27 microns High speed: up to 3 base resins, 27 µm resolution Super high speed: 1 base resin, 55 µm resolution PolyJet UV technology 110–240 V Dimensions: 2,870 x 1,960 x 2,105 mm Weight: 2,200 kg The price is ex works; we can arrange loading. We also offer worldwide shipping and the necessary customs documents, for an additional fee. The device can be inspected at our warehouse. Price includes VAT; invoice with VAT shown separately. !! Sale only to business customers, without warranty, no guarantee, no exchange, sold as is. Further description from the manufacturer: Create large or small production tools and full-size prototypes. Maximize your productivity and achieve a quick ROI with the Stratasys J4100™ 3D printer. Its multi-material capability, high throughput, and extra-large build platform enable faster, smarter, and more precise workflows. Thanks to PolyJet Technology™, this powerful system enables engineers, manufacturers, and designers to 3D print any design – no matter how complex or detailed. The size of the parts is irrelevant: the J4100 prints both large and small prototypes with equal precision. Print large parts with a length of over a meter in a single print job. This eliminates the need to split large CAD files and later assemble the parts. Print many parts in a single print job and benefit from competitive unit costs. The reliable and user-friendly J4100 enables you to produce parts that are ready for use with minimal or no post-processing. The support material can be quickly removed with a water jet, and for most applications, the smooth, multi-material parts do not require polishing or painting.

Condition: excellent (used), mileage: 127,752 km, fuel type: diesel, Year of construction: 2011, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, compressor, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, parking heater, power assisted steering, power mirror, soot filter, tachograph, tire pressure monitoring, traction control, For sale: a Scania P320 6x2 truck with a Zoeller garbage compactor body. The vehicle was imported from Germany and previously used by municipal services in Würzburg. The truck has a complete set of German documents. The engine starts, and the vehicle runs. The cab and body show normal signs of wear and tear, consistent with the vehicle's age and intended use. Technical specifications: Make: Scania Model: P320 Type: P320 DB6X2*4MNB Year of manufacture / first registration: 2011 Date of first registration: 29.11.2011 Mileage: 127,753 km Diesel engine: 9,290 cm³ Power: 235 kW / 320 hp Axle configuration: 6x2 Gross vehicle weight: 26,000 kg Curb weight: 15,400 kg Number of seats: 3 Body: Zoeller garbage compactor Color: orange VIN: YS2P6X20002067000 Vehicle dimensions: Length: approximately 9,900 mm Width: approximately 2,550 mm Height: approximately 3,720 mm The vehicle is equipped with, among other things, a reversing camera, air conditioning, a pneumatic driver's seat, electric windows and mirrors, work lights, and a rear container loading system. Guodpfxez Atndj Ak Uog

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Fully functional. The machine is in very good condition. In production. Tests possible. Gujdpfxjzqfdms Ak Ueg

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Guedpfxotyqhqe Ak Usg