Used Shells Pavers for sale (698)

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 594.2 kW (807.89 HP), type of input current: three-phase, type of cooling: air, overall weight: 8,005 kg, input voltage: 400 V, total width: 2,250 mm, total length: 7,560 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 675.7 kW (918.70 HP), Aircooled chiller/Heat pump TRANE RTMA170 594.2 kW / 675.7 kW Cooling capacity: 594.2 kW / 168.96 tons (12/7 — 35°C) Heating capacity: 675.7 kW / 192.13 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Frascold CXH51-140-538Y (screw) Type of refrigerant: R134а Number of fans: 12 pcs. (Frequency inverter) Dimensions: 7.56x2.25x2.4 m. Weight: 8005 kg Hodpfx Asxpvztog Ijnl Working hours: 11801/2195 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2007, cooling capacity: 605.5 kW (823.25 HP), type of input current: three-phase, overall weight: 4,375 kg, input voltage: 400 V, total width: 2,250 mm, total length: 5,250 mm, total height: 2,450 mm, AIRCOOLED CHILLER MCQUAY 605,5 KW Cooling capacity: 600 kW Year of manufacture: 2007 Options: with economizer Hjdehx D Sbjpfx Ag Isnl Heat exchanger: shell and tube Refrigerant circuit: 2 pcs. Compressors: 2 pcs. McQuay (screw) Type of refrigerant: R134a Number of fans: 10 pcs. Dimensions: 5.25 x 2.25 x 2.45 m Weight: 4 375 kg

Condition: good (used), Year of construction: 2013, functionality: fully functional, cooling capacity: 642 kW (872.88 HP), type of input current: three-phase, type of cooling: air, overall weight: 9,590 kg, input voltage: 400 V, total width: 2,400 mm, total length: 7,000 mm, total height: 2,400 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA FX FC NG SL T+ S 2702 642 KW Cooling capacity: 642 kW / 182.5 tons (12/7 — 35°C) Year of manufacture: 2013 Options: Hydraulic module. Freecooling. Heat exchanger for refrigerant subcooling with coolant. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer CSH8583-125CVY-40D (screw) Type of refrigerant: R134A Number of fans: 14 pcs. Hydraulic module: 1 pcs. water pump Grundfoss NB65-125 (Freecooling) + 1 pcs. Grundfoss TY50-120 (Freecooling) +Grundfoss TY50-120 (Heat exchanger for refrigerant subcooling with coolant) 2 pcs.. Expansion vessel. Dimensions: 7x2.4x2.4 m. Weight: 9590 kg. Working hours: 4904/9813 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Hodpfovzzxxjx Ag Ienl Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 1,055 kW (1,434.40 HP), type of input current: three-phase, type of cooling: water, overall weight: 6,300 kg, input voltage: 400 V, total width: 1,650 mm, total length: 3,300 mm, total height: 2,300 mm, warranty duration: 6 months, Watercooled chiller TRANE RTHD 300 SE 1055 kW Hjdpfx Aeyha Naog Isnl Cooling capacity: 1055 kW / 299.98 tons (12/7 - 30/35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Trane CHHC1D1F0N0 (screw) Type of refrigerant: R134a Dimensions: 3.3x1.65x2.3 m. Weight: 6300 kg. Working hours: 8319 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2013, cooling capacity: 1,037.3 kW (1,410.33 HP), type of input current: three-phase, type of cooling: air, input voltage: 400 V, total width: 2,400 mm, total length: 9,900 mm, total height: 2,200 mm, Aircooled chiller RHOSS TCAVSZ21040 1037,3 kW Cooling capacity: 1037,3 kW / 294.9 tons (12/7 — 35°C) Year of manufacture: 2013 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Type of refrigerant: R134A Compressors: 2 pcs. BITZER CSH9583-21Y-40D (screw) Hnjdpexzqpvofx Ag Ijl Number of fans: 18 pcs. Hydraulic module: 2 pcs. LOWARA FCT4150-250 Dimensions: 9,9х2,4х2,2 m Compressors need to be repaired

Condition: used, mileage: 88,150 km, power: 132 kW (179.47 HP), first registration: 10/2018, fuel type: diesel, overall weight: 7,000 kg, next inspection (TÜV): 02/2027, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 6, loading space length: 3,100 mm, loading space width: 2,180 mm, loading space height: 400 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), parking heater, soot filter, CTM steel three-way tipper, internal loading dimensions: 3100 x 2180 x 400 mm, 4 pairs of recessed lashing points in the floor, load protection grille behind cab, Palfinger PK 7001-K loading crane (year 2018) mounted behind cab with walk-around remote control and oil cooler, max. lifting capacity at 6.30 m: 870 kg, Kinshofer type PZG 250 G two-shell grab bucket, nominal capacity 250 ltr. with continuous rotator servo motor, cab with double cabin passenger compartment, 4 doors and 6 seats, comfort driver's seat, driver airbag, Webasto auxiliary heater, air conditioning, 2x electric windows, electrically adjustable and heated exterior mirrors, multifunction steering wheel, maintenance interval display, radio/CD with Bluetooth, central locking with remote control, cruise control, ESP, lane departure warning system, 6-speed manual gearbox, 100 ltr. fuel tank, 24 ltr. AdBlue tank, digital tachograph, daytime running light control, fog lights, LED work lights on the rear left & right of the cab roof, rotating beacon on left & right of cab roof, tow coupling (jaw + ball), 12V/13-pin trailer socket, large plastic side toolbox (right side), spare wheel holder (left side), rear axle differential lock, gross vehicle weight 7,000 kg / payload 1,750 kg, wheelbase 4750 mm, 1 owner, regularly serviced, good overall condition, not a rental vehicle! Euro 6 engine, low noise, German vehicle with German documents, sale to traders only! All information without guarantee! Subject to errors and prior sale! Hnsdpfxsylritj Ag Isl

Condition: used, mileage: 88,150 km, power: 132 kW (179.47 HP), first registration: 10/2018, fuel type: diesel, overall weight: 7,000 kg, next inspection (TÜV): 02/2027, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 6, loading space length: 3,100 mm, loading space width: 2,180 mm, loading space height: 400 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), parking heater, soot filter, CTM steel three-way tipper, internal loading dimensions: 3100 x 2180 x 400 mm, 4 pairs of lashing eyes recessed in the floor, headboard grid behind the driver's cab, Palfinger PK 7001-K loading crane mounted behind the driver's cab (year 2018) with remote control and oil cooler, lifting capacity at max. 6.30 m / 870 kg, Kinshofer type PZG 250 G dual-shell grab bucket, nominal capacity 250 l, with continuous rotation servo motor, cab with double crew compartment, 4 doors, 6 seats, comfort driver's seat, driver's airbag, Webasto auxiliary heater, air conditioning, 2x electric windows, electrically adjustable and heated exterior mirrors, multifunction steering wheel, maintenance interval display, radio / CD with Bluetooth, central locking with remote control, cruise control, ESP, lane departure warning system, 6-speed manual gearbox, 100 l fuel tank, 24 l AdBlue tank, digital tachograph, daytime running lights, fog lights, LED work lights on rear cab roof left & right, beacon lights on cab roof left & right, trailer coupling with tow jaw and ball head, 12-volt / 13-pin trailer socket, large plastic tool box on right side, spare wheel holder left side, rear axle differential lock, GVW 7,000 kg / payload 1,750 kg, wheelbase 4,750 mm, 1 owner, regularly serviced in workshop, good overall condition, not a rental vehicle! Euro 6 engine, low noise, German vehicle with German registration papers, sale to commercial customers only! All information without guarantee! Subject to errors and prior sale! Hedpfoylriysx Ag Isnl

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201011556, empty load weight: 3,300 kg, maximum load weight: 8,200 kg, overall weight: 11,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75 r17,5, color: red, The images are archive images; the vehicle may still be in use! Further information Steel welded construction, continuous tilt shaft at the rear with 80 mm ball bearings Front transmission support leg, folding rear support, 2 wheel chocks with brackets, steel underride guard, full-width rear mud flaps, quarter-shell fenders, spare wheel, same make as base tire, steel rim, loose, 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note! The side panel touches the storage compartment when folded down. ``` Lockable storage space for loading ramps beneath the loading area, 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair: 8,000 kg (rear ramp attachment bar). Towbar with tested 40 mm towing eye, towbar height adjustable via spindle, max. adjustment range: 300 mm. BPW drum brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption. Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation). Hedpfxslhpzvj Ag Ijnl Dual-line pneumatic brake system. Color-coded cable routing for easy servicing. Manual spindle parking brake, integral air reservoir, ABS and ALB, with ABS connector at the front, with connecting cable. Caution: The trailer may only be towed by towing vehicles that ensure the ABS is effective. 2 interchangeable coupling heads at the front, with connecting cables to the towing vehicle. 24-volt multi-chamber lights, yellow LED side lighting, 2 white position lights at the front. 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable connectors at the front, with connecting cable. Three-way tipping system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this can be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose. Hydraulic operation via the truck's PTO. Sturdy tipping body with 4 mm sheet steel floor, steel side wall construction, continuous side walls, foldable and pivoting with central locking at the bottom. Rear corner stanchions are pluggable. The rear wall is foldable and pivots, with central locking at the bottom. Bedside length approx. 5,000 mm, side walls with 6 hinges at the bottom, bed width 2,420 mm 5 pairs of lashing eyes in the floor, each 5 tons Country of registration: Germany, with DEKRA approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for a single-line license plate holder, contour markings with reflective stripes according to ECE R 048, white on the sides and red on the rear

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, tire size: 235/75 r17,5, color: green, operation weight: 3,240 kg, Further information Welded steel construction, continuous tilting shaft at the rear with 80 mm ball tilting bearing, gear support foot at the front, folding rear support, wheel chocks with holder, steel underride guard, rear spray flaps across the entire width (not in conjunction with forklift bracket), quarter-shell mudguards, spare wheel, same make as basic tires, steel rim, loose, plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery)Note! Dropside touches storage box when folded down, lockable storage space for access ramps underneath the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (suspension bar for ramps at the rear) Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 300 mm BPW drum brake axles, laser-measured axle/chassis Reduction in tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) 2-line compressed air brake systemColor-coded cable routing for easy servicing, hand spindle parking brake Hedpfx Ask E Tdaeg Ionl Integral air reservoir, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connecting cable to the motor vehicle 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck, hydraulic connection with SVK plug NW 10/3, incl. connecting hose, hydraulic actuation via truck power take-off Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoting with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, 5 tons each. Operating instructions: The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Country of registration: Germany, with Dekra approval and expert opinion (according to §13 EG - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: excellent (used), Year of construction: 2014, Marel TBL 3000 Target Batcher Marel’s TargetBatcher has long been known for its accuracy and weighting for fixed-weight packaging. With 7 high accuracy static scales, with 14 buffer containers, TargetBatcher selects the best product combination in just a fraction of a second, making it much easier for processors to process multiple small product batches where a quick change from one product to another is crucial. TargetBatcher is present in plants around the world and is used for a variety of products e.g. mackerel, haddock fillets, tuna steaks, tiger prawns in shell, hake slices, squid, cuttlefish and other products. This compact, compact weight is available in two variants: fresh and frozen products and specially glazed products. TargetBatcher is an easy way to reduce raw material loss, mainly by combining the pre-determination of the number of frozen or fresh products that should be in a package of a certain weight. Optionally, you can use Marela software that tracks machine operation in real time. The information collected from TargetBatcher is a complete overview of the activities that are part of the weighing process. TargetBatcher is accurate and effectively reduces raw material losses. It is a stable device that you can rely on and doesn’t need too much maintenance and is also easy to use. Model: Marel TBL-3000 Hedpfx Asy Au Iusg Ienl Year: 2014 Machine dimensions (LxWxH): 3.130x790x1.610 mm Machine weight: 330 kg. Power: 230/400V / 1kW / 50/60Hz Max. productdimensions (LxWxH): 280x170x120 mm Max. product weight: 3.000 g Capacity: 12-24 portion/min. Accurancy: 1g / 0,035 ounces

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1 kg, maximum load weight: 4 kg, overall weight: 6 kg, axle configuration: 1 axle, tire size: 15.0/55-17 10 pr, Further information Chassis central axle tipper trailer Welded steel construction Heavy-duty front support wheel, folding Wheel chocks with holder Steel underride guard Quarter-shell mudguards Towing device central axle trailer Rigid drawbar for top hitching, 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Rigid Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 15 PR manufacturer's choice Factory silver steel rims Brake system Overrun brake - Rückmatik Release valve Integral air reservoir 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 12 volt, 2 five-chamber lights, without lighting carrier with impact-resistant glass 2 white position lights at the front 2 white/red lane departure lights at the rear 7-pin plug Hydraulics 3-stage tilt cylinder Hnjdpfx Agoi Riypo Isl Limit switch Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Hydraulic actuation via truck power take-off Tipper bodies Sturdy tipper body, steel side wall structure, continuous side walls, hinged and pendulum-mounted Platform length approx. 4,000 mm, side walls with 5 hinges at the bottom. Platform width 2020 mm 4 pairs of lashing eyes in the floor, 2.5 tons each Country of approval / plates Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation15-year warranty against rusting through Dropside/bridge RAL 6005 moss green

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,860 kg, maximum load weight: 7,040 kg, overall weight: 9,900 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Hnsdpfxsi Ri Eij Ag Iol Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width (not in conjunction with forklift bracket) Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area 1 pair of ramps 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (suspension bar for ramps at the rear) Towing device for central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension GFA or BPW axles of the manufacturer's choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and non-oscillating without central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 9010 pure white Note! Bridge inside only primed if painted bridge version! Attention! These are archive pictures. Also available IMMEDIATELY with 5m bridge!

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space volume: 9 m³, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, seat heater, soot filter, traction control, trailer coupling, - Heated mirrors - Leaf suspension - Brake booster - Differential lock - High beam - Low noise - Speed limiter - Air conditioning - Air-suspended seats Hodpfx Agey Anfao Ienl - Particulate filter - PTO (Power Take-Off) - Radio/CD - Reversing camera - Sunroof - Seat heating - Sun visor X TO GO "EUROMIX TO GO" OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WITH ACUTE DEMAND (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT) Your advantages: - Ready-to-use complete vehicles (concrete mixers/tippers) - Immediate availability directly from the manufacturer - Assembly, installation, commercial vehicles - Best price/performance ratio - Financing options - Trade-in of your used vehicles Renault K 480 8x4 Euro6e EuromixMTP EM 9 L Truck Mixer ENGINE DE 13, Displacement 12.8 liters, Max Power: 360 kW at 1,404-1,700 rpm Optidriver gearbox AT 2612 (14.94 - 1) Wheelbase 4,350 mm Rear axle ratio: 3.33 Tire size 315/80 R22.5 Two electrically adjustable and heated exterior mirrors Tinted rear window Pre-installation for CB radio Rubber floor mats LUXURY DRIVER'S SEAT: Adjustable vertical suspension, adjustable seat cushion angle, longitudinal and height adjustment, removable cover, adjustable headrest, fast lowering of the seat with height memory, adjustable side support on the backrest, adjustable side support on the seat cushion, adjustable lumbar support, seat cushion extension, seat heating (driver), seat ventilation (driver), two armrests on the driver's seat Viscope external sun visor Compressed air gun in the cab Mixer equipment: EUROMIX MTP - Mixer superstructure EM 9 L Model: EM 9 L Nominal volume 9 m³ of ready-mixed concrete Mixer drum in lightweight design Mixer drum in lightweight version made of HARDOX S450 material Mixing spirals in lightweight version made of HARDOX S500 material Gearbox brand ZF-P5300 Hydraulic pump brand Bosch Rexroth Hydraulic motor brand Bosch Rexroth Integrated oil cooling system by ASA Mixing control: mechanical and Start/Stop electrically Compressed air water system Water connection on platform with hose line Water filling line, one-sided with C-coupling Mixer drum with service hatch Ladder with platform Rubber attachment on charging hopper Swiveling, single-arm discharge chute made of steel Wear plates in charging hopper, discharge shell, and pivot chute Drum locking device for drum safety during maintenance Polyurethane primer Weight approx. 3,425 kg, deviations +/- 5% with emergency-stop function according to EU safety standards Fenders made of aluminum above the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500 l (compressed air) Steel water tank Shut-off valve installed below water tank in the fill line Water connection "C"-coupling Operation & electrics Mixer operation – mechanically at the rear Start-stop system (with EDC) Geometric volume 15,120 l Water tank volume 9,745 l Tank inclination 12.3° Length 6,785 mm Width 2,300 mm Height 2,693 mm General information Year of manufacture: 2026...

Condition: reconditioned (used), Year of construction: 2022, Trane | RTAA270 | Water Cooling System | | Brand | TRANE | | Model | RTAA270 | | Cooling Capacity kW/h | 1000 kW/h | Hnjdpfxsiphmcj Ag Iel | Evaporator | Shell & Tube | | Condenser | AI Finned Cu Tube | | Compressor | Helical Screw | | Compressor Model | 2 x CHHB0100 - 1 x CHHB070 | | Control | Compatible Control Microprocessor | | Dimensions mm. | 2285x9800x2540 mm | | Weight | 9096 Kg | Product Information Trane is a rebuilt chiller, a Trane water-cooled chiller with two-stage three-screw compressors. This chiller is equipped with a Trane Tracer Compatible Control Microprocessor. The rebuilt chiller works with a guaranteed start-up, tested from A to Z, at the specified capacity of +7/12°C water temperature and +35°C ambient temperature. ABOUT OUR COMPANY ; We offer for sale the cooling products "Chiller" which we have obtained as a result of our production process. Our "Chiller" products, which are provided by leasing or by re-production, are tested for their performance characteristics (current, pressure and tightness) before being shipped. In addition, we provide the necessary electrical and water pipe installation project for the installation and operation of the products to the purchasing companies. We also provide our customers with a guarantee for any problems that may arise during the operation of our products on site. In this way, our customers are fully assured during the installation and operation process of their units. #Trane #RTAA270 #WaterCooling #Chiller #Screw #Compressor #Tracer #Compatible #Control #Microprocessor #Installation

Condition: new, maximum load weight: 30,065 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 25 m³, Year of construction: 2025, Equipment: ABS, Available for purchase, rental, or lease with purchase option upon agreement! Schmitz Cargobull SKI 24 SL 7.2, approx. 25 m³ steel round body tipper with sliding tarpaulin – Also for Rent! ---- * Manufacturer: Schmitz Cargobull * Model: SKI 24 SL 7.2 – Steel round body tipper * First registration: – (NEW VEHICLE) * Colors: Body black RAL 9005, chassis Novagrau 7350, tarpaulin silver * Capacity: Internal body approx. 25 m³ (7.48m long x 2.354m wide x 1.46m high) * Gross vehicle weight: 36,000 kg * Unladen weight as per order confirmation: 5,935 kg Hsdpewa Ht Rjfx Ag Ijnl * Payload: 30,065 kg * Axles: 3x SCB axles / 1st axle liftable / starting aid / disc brakes * Tyres: 385/65 R 22.5 on Speedline diamond ALLOY WHEELS * Suspension: Air suspension with lift/lower function * EBS * Overhanging pendulum tailgate with 2-hook locking and continuous seal plus additional catches * Floor 5 mm * Side walls 4 mm * Operator platform with access at front left * Hard-chromed hydraulic cylinder * Sliding tarpaulin with central locking * 1x roof bow * Individual mudguards with rear spray flaps * Heavy-duty steel landing legs * Hydraulic hose holder * Paver brake with electro-pneumatic control * Folding underrun protection * Round tail lights * 2x rear LED reversing lights * LED side marker lights linked to indicators * 1x LED rear fog light * 1x towing coupling Available for purchase, rental, or lease with purchase option upon agreement! Note regarding possible errors in the advertisement: Despite careful preparation of this advertisement, occasional errors may occur in the text or specifications. We assume no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Hnodpfx Agoid Al Ns Iel Manuals and schematics originals

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Hnodpfx Aoq Nf U Eog Iol Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Hnodpfxeq Nx Als Ag Ijl Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: new, functionality: fully functional, gearing type: mechanical, fuel type: gasoline, color: orange, overall weight: 130 kg, empty load weight: 65 kg, Year of construction: 2026, displacement volume: 212 cm³, machine/vehicle number: 500 XX XXX, motor model: RATO R210, Motorized Bitumen Sprayer MB 200 The motorized bitumen sprayer MB 200 is designed for spraying bitumen onto asphalt surfaces. It is used for repair of asphalt surfaces or for the construction of new asphalt layers. The bitumen is applied using a manually operated spray nozzle with continuously adjustable spray cone. The bitumen is pumped and preheated from a drum mounted on a transport trolley together with the spraying unit. Hnodpfx Aoyxmlqjg Isl The unit is powered by an air-cooled gasoline engine RATO R210. Cleaning of the system is simple by flushing with diesel fuel. Standard equipment: -Own drive engine RATO R210 -Freewheel clutch -Bitumen pump -Forced heating with recirculated exhaust gases -Suction filter -Spray bar with spray nozzle Additional equipment: -Transport trolley

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Hodpfx Agjq Ngafo Isnl Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials. Hnodpfsvn D I Nsx Ag Iel

Condition: new, fuel type: electric, Year of construction: 2026, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. Hodeq Igiiopfx Ag Isnl 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 656.5 kW (892.59 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,148 kg, input voltage: 400 V, total width: 2,260 mm, total length: 6,260 mm, total height: 2,570 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA NX2 G06/K 0706 656.5 kW Cooling capacity: 656.5 kW / 186.67 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 5 pcs. Danfoss DSH485C4APC (scroll) + 1 pcs. Danfoss DSH600B4APC (scroll) Type of refrigerant: R454B Number of fans: 12 pcs. (EC-fans) Dimensions: 6.26x2.26x2.57 m. Weight: 5148 kg. Working hours: 0/0/0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS Hnedpoyzzzlefx Ag Isl The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 311 kW (422.84 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,940 kg, input voltage: 400 V, total width: 2,230 mm, total length: 6,120 mm, total height: 2,150 mm, warranty duration: 6 months, heating capacity: 327 kW (444.60 HP), Aircooled chiller/Heat pump CLIMAVENETA NX N Y/CA 1104T 311 kW/327 kW Hodpfxeyzzvij Ag Ienl Cooling capacity: 311 kW / 88.43 tons (12/7 — 35°C) Heating capacity: 327 kW / 92.98 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer GSU80385VLB4-2 (scroll) + 2 pcs. Bitzer GSU80295VLB4-2 (scroll) Type of refrigerant: R410А Number of fans: 8 pcs. (EC-fans) Hydraulic module: 2 pcs. water pump Grundfos MGE112MC-2FF215-JA-400 (Frequency inverter) Dimensions: 6.12x2.23x2.15 m Weight: 3940 kg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), mileage: 20,274 km, power: 169 kW (229.78 HP), first registration: 12/1999, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, number of seats: 7, total length: 8,700 mm, loading space length: 8,700 mm, Year of construction: 1999, Structure Volume: .55 m3 Tank capacity: 5500 liters = More information = General information Number of doors: 4 Cab: double Axle configuration Front axle: Steering Rear axle: Double wheels Weights GVW: 15.000 kg Hedpfxoyzkbno Ag Isnl Functional Make of bodywork: GRASSO SHELL Water tank: 5.500 l Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Damages: none = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A