Used Sheet Metal Shelves for sale (38,530)

Condition: excellent (used), Year of construction: 2001, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, working width: 1,850 mm, working range: 1,850 mm, 1 Used Salvagnini cnc automatic panel bender for sale cnc folder P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bending Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm. Csdpjwb E Uvjfx Ab Tork

Year of construction: 1981, condition: good (used), Sheet metal bending machine SCHÄFER (Schaefer) Roller length: 2000 mm Roller diameter: 220 mm Sheet metal bending thickness: up to 20 mm Machine weight: approx 18-19 000 kg Crsdpfxshufgpj Ab Tjk

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The DiscMaster SF is equipped with oscillating disc stations from above and below for the simultaneous processing of two workpiece sides in one pass. The disc tools with flexible sanding flaps rotate and oscillate across the workpiece. This means that all internal and external contours are processed uniformly through 360°, regardless of the orientation of the contour. Loewer DiscMaster SF 2/2 - 1500 deburring machine (2020) Manufacturer: Loewer Type: DiscMaster SF 2/2 - 1500 Year of manufacture: 2020 Condition: very good, used max. sanding height : 80 mm max. workpiece width : 1500mm Disc motor - rated power : 4 x 2,2 kW disc motor - speed : 1.000 min-1 feed adjustment motor - rated power : 2 x 0.37 kW Height adjustment motor : 0,75kW Oscillation motor : 4 x 0.75 kW Operating voltage : 400 V Frequency : 50 Hz On-site fuse protection : 40 A Extraction connection dimension : 2 x 180 mm Air requirement : 5,500 m3 / h Minimum air speed at the machine connection : 30 m / s Crjdpexnnfbofx Ab Tok Negative pressure at the extraction connection : 2,750 Pa Operating pressure : 6 - 8 bar Length : 1,950 mm Width : 2,150 mm Height : 2,000 mm Weight: 3,400 kg Options: - Transport table infeed - Transport table outfeed - Sensor strip for even tool wear. Detection of the machine's occupancy and display at the infeed of the preferred loading position. Scope of delivery: - Documentation

Condition: new, functionality: fully functional, Year of construction: 2023, machine/vehicle number: SY390-156, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Knuth, controller model: Knuth, number of rollers: 4, roller (bottom) diameter: 360 mm, roller (top) diameter: 390 mm, side roll diameter: 300 mm, roller length: 2,600 mm, working width: 3,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 15,800 kg, total length: 5,470 mm, total width: 2,100 mm, total height: 1,985 mm, power: 22 kW (29.91 HP), input voltage: 380 V, number of digital displays: 1, Equipment: CE marking, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, The machine is new and has never been used. List price is €114,300. It was purchased for a client who no longer wanted it. Crodpsxdcxbefx Ab Tsk RBM 25/40 Hydraulic Plate Rolling Machine Standard Equipment: - 4 hardened rolls - Conical rolling device - Digital display for side rolls - Separate control panel - Operating manual Technical Description: - Heavy-duty frame with contemporary, rigid construction - Hydraulic clamping bearings for easy material feed - Roll movement, parallelism, and cone adjustment are all controlled from the operator panel - All rolls are induction-hardened and precisely mounted in high-quality bearings - Upper and lower rolls are powered by independent hydraulic motors - Hydraulic components supplied by Parker and Bosch - Electrical components supplied by Siemens and Telemecanique - Minimum bending diameter: 3 × upper roll diameter Technical Specifications: | Parameter | Unit | Value | |-----|-----|----- | | Working length | mm | 2,600 | | Max. plate thickness (at 240 N/mm²) | mm | 30 | | Max. pre-bending thickness | mm | 25 | | Number of rolls | pcs | 4 | | Upper roll diameter | mm | Ø 390 | | Lower roll diameter | mm | Ø 360 | | Side roll diameter | mm | Ø 300 | | Main motor power | kW | 22 | | Machine dimensions (L × W × H) | mm | 5,500 × 2,100 × 2,000| | Net weight | kg | 15,800 |

Condition: new, Year of construction: 2025, Automatic roofing sheet forming machine for aluminum or galvanized steel sheet with a sheet width of 1000mm. Includes automatic sheet decoiler, Siemens control system, and technical documentation. Cedpfx Abow A Rt Ho Tsrk

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254629, Offer 25311 Technical Data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting capacity: - Mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate: up to approx. 55 / min - Table size: W 800 x D 800 mm Crjdpfxoxqzire Ab Tek - Working height: approx. 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil filling: 50 l - Electric foot pedal - Required space: approx. W 1300 x H 1250 x D 1300 mm - Weight: approx. 800 kg - Mobile base frame

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Crsdsw T Sc Aopfx Ab Tok Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,700 mm, workpiece weight (max.): 500 kg, overall weight: 680 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 600 mm, table length: 1,300 mm, table width: 600 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 600 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 600 mm, height adjustment type: mechanical, input current: 20 A, Equipment: CE marking, documentation/manual, type plate available, Polish Deburring Machine – Direct from Manufacturer Cedpowzu A Nofx Ab Terk We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a trusted and experienced company specializing in metal and woodworking machinery. With decades of expertise and innovation, Madora is known for delivering durable, efficient, and user-friendly solutions tailored to the needs of industrial clients across Europe. Our machines are designed for precision, performance, and long-term reliability—all at competitive prices. The smallest model in the MADORA range, the GP 600 2Z, is a versatile deburring machine for cleaning sheet metal after various cutting processes. Equipped with two "Z"-type machining units, it offers outstanding flexibility and high machining capacity. The machine can perform two operations simultaneously: not only can it remove scale after plasma cutting, but it is also able to deburr or round the edges of workpieces after laser cutting—all in a single pass. Its machining width of up to 600 mm allows for the efficient processing of small and medium-sized components. With suitable tooling, the GP 600 2Z handles heavy edge rounding and oxide removal as well. The GP 600 2Z deburring machine features an electronic numeric control panel, which allows the operator precise and continuous adjustment of machining parameters such as workpiece height, feed rate, and tool rotation speed. Each machining unit can be controlled independently, giving the operator full flexibility to select the required process steps within a single pass.

Condition: used, functionality: limited functionality, Year of construction: 2025, SHEET METAL ROLLING MACHINE W01-1.5X1300 Technical parameters Cedpfx Aexqff Rob Tsrk Roller diameter 75 mm Roller length 1300 mm Max. sheet thickness 1.5 mm Dimensions 1750x350x1100 mm WARNING !!! LAST ITEM, NEW, PACKAGING IN POOR CONDITION.

Condition: reconditioned (used), Year of construction: 2015, Refurbished RAS MiniBendCenter 79.05 Technical data Board length: 50–600 mm Board width: 40–600 mm Sheet thickness max. (400 N/mm²) depending on tool: 3,0 mm Upper cheek stroke max: 500 mm Smallest leg height Standard value depends on tool: 5 mm x s Maximum leg height: 127 mm Weight of bending cell: 10 tons Weight of cladding and electrics: ca. 2027 kg Weight of machine elements: ca. 945 kg Motor operation: 400V, 50/60 Hz, 3-Ph Year of construction: 2015 Condition: refurbished—good used condition Bending cell: Automatic sheet thickness adjustment Automatic tool clamping Blank scanner Main manipulator: 3 servomotors for X,Y,Z 1 servo motor for lower rotary axis + separate drive for rotary axis Double sheet detection Tool changer: 3 servomotors for X,Y,Z 1 pneum. Swivel drive for rotary axis Tool gripper Tool magazine on 2 levels Automatic tool clamping in the tool magazine Cladding: Bending cell front and rear Movable control panel: Credpfx Aexlgrbob Tok 18" Touch & More control unit Pallet station: Roller conveyors and heavy-duty chain conveyors 1 space for new pallets (parts that are being processed) 1 space for "pallet in process" 2 spaces for finished pallets (empty or with remaining quantity) Additional equipment: Intelligent charging robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9mm) suction cup series (7x20mm) Conveyor curve belt with 6 connection stations Cladding finished part output Complete tool set RAS CAM-Office software incl. SolidWorks license and maintenance contract for 2 years This high-quality used RAS MiniBendCenter 79.05 offers you proven quality at an attractive price and is available directly from the manufacturer. It is a fully automatic bending center specifically designed for the efficient processing of small parts. It comes with a manufacturer's warranty, maintenance included, and the latest software version. With advanced technology such as automatic sheet thickness adjustment, an intelligent loading robot, and a powerful control system, it optimizes your production and reduces costs. Benefit from high flexibility and fast amortization through automated processes and versatile configuration.

Condition: new, Year of construction: 2026, control type: CNC control, controller model: Easybend 2D, working width: 3,100 mm, bending force (max.): 150 t, distance between stands: 2,600 mm, New machine Codsxan Imjpfx Ab Tjrk Haco press brake type OPTIFORM 3m x 150T Easybend CNC controller Rear motorized back gauge axis XR Manual table for standard European-type tooling Manual fast clamping system for punches, European System type DSP light barrier Option: 2 swiveling front support arms Version OPF 30150 + : with XRZ1Z2 backgauge - CNC crowning

Condition: good (used), Year of construction: 2011, machine/vehicle number: 654311519, Offer 25321 Technical data: - Cutting length up to 200 mm - Cutting thickness – steel up to 6 mm – stainless steel up to 4 mm - Infinitely adjustable cutting angle: 30° – 140° - Hydraulic hold-down device - Stroke rate: 28 strokes/min - Depth stops with angle adjustment - Table height approx. 920 mm - Drive: 400 V / 4.0 kW - Electric foot pedal - Space requirement approx. W 1050 x H 1350 x D 1200 mm Crodoxqycdjpfx Ab Tek - Weight approx. 950 kg

Condition: excellent (used), functionality: fully functional, Used Fintec 130 Sheet Metal Corner Linishing Sanding / Finishing Machine For sale With Spare Belts Credpfx Aswbhtnsb Tek Ideal for sheet metal boxes

Condition: used, Year of construction: 2025, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SN078146, 12 months warranty / 1800 operating hours Cedpfexp Nd Ijx Ab Terk

Condition: used, Year of construction: 1988, Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Crjdpfxexpudys Ab Tsk Year of construction:1988 Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg

Condition: used, Guillotine Shear, Sheet Metal Shear SCHECHTL Type SMT 100 Machine No. 4307 Year of manufacture: 1991 Cutting length: 1030 mm Cutting thickness: 3.5 mm Table area: 1040 x 380 mm Working height: 840 mm Drive power: 3 kW Power supply: 400 Volt, 50 Hz - Mechanical sheet hold-down - Electric foot switch - Simple back gauge, 750 mm with handwheel adjustment - Front pull-out table extension with transverse rail, extendable by 350 mm - SICK safety light curtain at the rear of the machine as reach-in protection - Rear support table beneath the back gauge for sheet metal cut-offs Required space (L x W x H): 1700 x 1400 x 1150 mm Transport dimensions on pallet (L x W x H): 1800 x 1450 x 1290 mm Weight: 700 kg Very good condition Cedpfx Aexk Th Heb Tsrk

Condition: used, functionality: fully functional, Year of construction: 1987, working width: 2,050 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 2 mm, overall weight: 1,650 kg, Bending capacity: 2050 x 2 mm. Bending angle: 135°. Backgauge: Manual. Year: 1987 Cjdpexpfrhefx Ab Tjrk Country of origin: Czech Republic. Size (L x W x H): 3300 x 1740 x 1300 mm. Weight: 1650 kg. Strong cast iron machine with misc. equipment. All our machines are tested and serviced before delivery.

Condition: new, Universal scissors for cutting metal sheets Base included Working length ----- 1000 mm Sheet thickness ----- 1.5 mm Weight ----- 70 kg Crjdpfx Absga T Efo Tek

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Fintec 128 Tube finishing machine for sale Crodpfx Aswbh Dyeb Tek Can be viewed under power with your steel tubes

Condition: good (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, Semi-automatic can seamer for round cans. Stainless steel version. Can diameter: 42–163 mm, height: 26–300 mm, material thickness: 0.35 mm. Currently equipped for 99 mm. Crjdpfx Abjxn Nqlj Tsk

Condition: good (used), Year of construction: 1998, In good technical condition. Cutting length: 3,000 mm, max. capacity: 6 mm. Year of manufacture: 1998, weight: 5,500 kg, including new double-sided blades. Credpfx Aexd Tcdeb Tek

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, overall weight: 5,200 kg, input current: 95 A, ERNST Neptun EBB 1500 is a deburring machine designed for sheet metal processing, used for cleaning and rounding the edges of parts cut by laser, punching, or flame cutting. This machine enables alternating processing of various materials such as steel sheets, aluminum, galvanized steel, or materials with protective film, thanks to its flexible deburring roller and brush set. Key features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made from different materials without the need for constant abrasive changes. • Functionality: Uses a flexible deburring roller and a set of brushes (steel or flap brushes) for deburring or edge rounding. Cedpoxmhxxsfx Ab Tork • Precision: Allows for the achievement of an identical and uniform radius on all edges. • Ideal solution for: Companies working with diverse materials where edge processing after cutting is required.

Year of construction: 2020, condition: new, Lot of steel sheets in perfect condition. Crodpfjurumaex Ab Tok Total weight: 360T. Delivery on site. List of dimensions on request.

Condition: new, functionality: fully functional, machine/vehicle number: WS500-8, Year of construction: 2025, load capacity: 600 kg, empty load weight: 100 kg, Equipment: CE marking, Battery-operated vacuum lifter for sheet metal transport, designed for forklift use – STEEL SYSTEM WS 500 Device specifications: • 8 round suction pads by DS SYSTEM, Ø 250 mm • Beam length: 2500 mm • Individual adjustment of each suction pad in the X and Y axes • 12V battery operation for up to 9 hours runtime • Radio remote control operation, allowing: • Main unit on/off • Vacuum suction/release • Manometer • Battery charge indicator • Lifting capacity: 600 kg • Weight: approx. 100 kg Codpoxl Ry Nefx Ab Terk • 12V battery operation for up to 9 hours runtime Features: ✓ Adjustable operating range design ✓ Suitable for various working conditions ✓ Suction pads can be configured independently, tool-free ✓ Suction pads with REPLACEABLE SEALS ✓ Radio remote control allows operation from the forklift cabin ✓ Forklift fork pockets for easy device transport ✓ Battery charge level indicator ✓ Vacuum reservoir ✓ CE certificate ✓ 12-month standard warranty

Condition: ready for operation (used), Year of construction: 1983, working width: 4,000 mm, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, overall weight: 12,000 kg, total length: 4,400 mm, total width: 2,500 mm, total height: 1,850 mm, cutting length (max.): 4,100 mm, throat depth: 100 mm, Cutting length 4100 mm, cutting capacity 8 mm, motor 18 KW, working high 800 mm, back gauge 1000 mm motorised, footpedal, frontarms, cutting gap adjustable, pneumatic sheet support backside, dimension 4400x2500x1850 mm, weight ca. 12000 kgs Crjdsvvafaspfx Ab Tok