Used Cutting Roller for sale (20,402)

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roller, cardboard roll carrier, transport roller, carrying roller -Transport trolley: with cutting device -Roll: Ø 327 x 1800 mm rubberized -Shaft: Ø 50 x 415 mm -Drive shaft/mount: Dimensions see photos Gsdpfx Absyx Agwo Dsit -Dimensions: 2355/520/H327 mm -Weight: 286 kg/unit

Condition: good (used), End mill, roller cutter, milling cutter, disc cutter, slot cutter -Cylinder end mill: Disc cutter 99.6 kg net, carbide-tipped -Type: various versions -Price/Fee: complete -Transport dimensions: 790/600/H210 mm -Weight: 99.6 kg Gijdoy D Ndyjpfx Ab Dst

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Gjdpfx Ajxtiunob Doit Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Year of construction: 1965, condition: ready for operation (used), Max. working width: 1200mm, clear span: 70-150mm, table dimensions: 1700x1400mm, working height: 850mm, roll diameter: 250mm, connected load: 2.2kW, weight: 800kg. Gsdpfx Aslc N Szjb Doit

Year of construction: 1994, condition: ready for operation (used), Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation. Giedpfxsix Ahbe Ab Dst

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, travel distance X-axis: 6,000 mm, workpiece weight (max.): 1,000 kg, laser power: 20,000 W, pipe diameter (max.): 6,000 mm, Equipment: cooling unit, safety light barrier, Max. Length of Tube: 6m Cutting Capacity of Round Tube: Φ360mm Cutting Capacity of Square Tube: Φ360mm Max. Load: 1000kg Zero Waste Cutting Full stroke movement, capable of cutting both ends of the pipe, improving material utilization Full Pipe Cutting available Standard auxiliary loading and unloading system loading, unloading, and cutting of 6m full pipes available Bevel Cutting Function available Bevel angle adjustable from 0-45° Godpfx Aov D T H Tjb Doit Capable of V, X, Y, K type bevel cutting Optional Automatic Loading and Unloading Saves labor costs, and increases production efficiency Intelligent production for high efficiency

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° Giodpfx Absw A H T Ae Djt U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: new, functionality: fully functional, overall weight: 24,000 kg, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: MYC1500x6000F4000, Crawler Mobile Mud Stone Separator – Model MYC1500×6000F400O The MYC1500×6000F400O Crawler Mobile Mud Stone Separator is a high-performance soil and stone separation machine developed by Henan Mingyuan Heavy Industrial Equipment Co., Ltd. It is designed for efficient separation of clay, mud, and fine soil from mixed materials such as sand, gravel, and construction waste. With its crawler-type mobility, large-capacity drum screen, and intelligent control system, this model provides a flexible and reliable solution for material cleaning and classification in complex working environments. Applications The MYC1500×6000F400O is widely used in: Sand and gravel production: Removes clay and impurities from raw aggregates, improving product quality. Construction waste recycling: Separates soil and debris for reuse of clean aggregates. Mining and quarrying: Pre-screens and washes ores, removing sticky soil before crushing or beneficiation. Infrastructure and road construction: Cleans and classifies soil and stone for foundation preparation. Municipal and river dredging projects: Separates sediment, stones, and debris from dredged materials. Its crawler chassis allows easy movement on muddy or uneven ground, making it ideal for on-site operations where fixed installations are not practical. Main Features 1. Crawler Mobile Design Equipped with a heavy-duty crawler chassis and hydraulic drive, the machine can move flexibly on various terrains. It eliminates the need for additional transport equipment, reducing setup time and improving efficiency. 2. High-Efficiency Drum Screening The 1500 mm diameter and 6000 mm long rotary drum provide a large screening area and high throughput. The wear-resistant mesh panels ensure long service life and easy maintenance. The optimized screen aperture effectively separates mud and fine soil from larger aggregates. 3. Integrated Cleaning System Internal spiral blades and high-pressure spray nozzles work together to wash and separate sticky materials. This dual-action cleaning ensures clean aggregates that meet construction and production standards. 4. Intelligent Control The PLC control system allows adjustment of drum speed, water flow, and feed rate according to material conditions. Automatic overload protection and fault alarms enhance safety and reliability. 5. Energy-Saving and Eco-Friendly The hydraulic-electric hybrid drive reduces fuel consumption and emissions. The water recycling system minimizes water usage, making it suitable for environmentally sensitive areas. 6. Easy Maintenance Modular design and accessible components simplify inspection and servicing. Quick replacement of wear parts reduces downtime and maintenance costs. 7. Strong Adaptability Capable of handling clay-rich soil, river sand, construction debris, and weathered rock. Adjustable screening parameters make it suitable for different particle sizes and moisture levels. Technical Parameters Specification Model:MYC1500×6000F400O Screen Typ: roller screener Roller screener width/:1500 mm Roller Screener Length:6000 mm Gijdpfx Asy Dz U Deb Dst Feeding Size≤ 600 mm Capacity: 80–300 t/h (depending on material) Power System Diesel engine + hydraulic drive Mobility:Crawler-type chassis Control System PLC intelligent control Water System High-pressure spray, adjustable flow Discharge Dual outlet for clean stone and mud Weight :Approx. 22 tons Dimensions (L×W×H):9,800 × 2,800 × 3,200 mm

Condition: used, Year of construction: 2012, functionality: fully functional, Messer Cutting Systems Multitherm 4000 - Oxy-fuel Working area: 2500 x 15000 mm 1 Global Control Plus CNC controller 50 m network cable 1 cooling unit for control cabinet Gisdjynzfpopfx Ab Djt 4 laser diodes 6 drives 1 heat shield (without air cooling) 1 heat shield (without air cooling) 20 m track 1 OmniFlow oxy-fuel supply, 100 cbm 1 compressed air supply on the machine 1 distributor block for compressed air purging 1 oxy-fuel take-off point with pressure regulator 1 take-off point for compressed air 4 ALFA machine cutting torches 4 compressed air purges for ALFA 4 torch suspensions OL 200 N 4 Sensomat Alfa 20 m energy supply via energy chain 1 emergency pull cord (front) 1 emergency pull cord (rear) 2 wheel well safety devices Including tables and rails

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor Gsdpfowypp Iox Ab Dsit - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: new, Brand New - One Year Warranty Max. die cutting size Giodpevv R Hzjfx Ab Dot 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Motor power 5.5 kW Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size Gsdpfx Ajvv R H Uob Deit 750 X 520 mm Working speed 28±2 s/min Max. rule length ≤15 m Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Godpfxop H Swds Ab Doit Total weight: About 4000KG

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Giodpjykqwtjfx Ab Dst Manufacturer: TCI Cutting Model: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Equipment: 1 KMT OEM SL-VI 50 HP 4,000 bar cutting head with high-pressure pump 1 plasma cutting head with Hypertherm XPR300 power source High-voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive measuring system Collision protection system Water treatment plant TCI HIDROSYSTEM 2.0 Sludge removal system Software: Lantek Expert 2D with automatic nesting function

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Model: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Filter system: Donaldson DFPRO 6 Cyclopeel Cutting software: Omniwin Standard Availability: immediate Gijdpfoyhd Rbsx Ab Djt

Condition: good (used), HPM 92 Paper Cutting Guillotine Gjdpfsywdpkex Ab Doit Machine in very good condition, ready to work. Year of manufacture: 2009. High quality. Technical specifications: Cutting width: 920 mm Stack height: 120 mm Weight: 2500 kg 380V power supply Equipment: – Programming unit with color touchscreen monitor (Mitsubishi Manufactured) – Air table – Enlarged side tables – Photocells – Chrome table surfaces – Spare knife Machine modeled after the German Polar, very solidly built, with Western electronics (Schneider, Mitsubishi, Eaton). Very stable rear frame construction, CNC rail guidance, ball screw drive.

Condition: good (used), Pipe cutting machine, pipe cutting saw, pipe cutter -Pipe size: 22-108 mm pipes of the pressfitting systems made of stainless steel, carbon steel, copper -Equipment: Foot switch, steel rollers, stainless steel rollers, cutting wheel, steady rest, workbench, vice Godpfxev Tz N Io Ab Deit -Operating voltage: 220 volts -Dimensions: 1200/870/H1170 mm Transport dimensions: 1200/870/H460 mm -Weight: 61 kg

Condition: not inspected (used), functionality: unexamined, input voltage: 380 V, input frequency: 50 Hz, total height: 600 mm, total length: 700 mm, total width: 500 mm, overall weight: 150 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 04/05/26 and 07/05/26. MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Dimensions & Weight Godpfxoyr Nvwj Ab Dsit Dimensions (L x W x H): 700 x 500 x 600 mm Machine weight: 150 kg External reference: Lot 78

Condition: good (used), Gravity Flexi Roller Conveyors in Stock Gedpfx Absyr Nuae Doit 3 Conveyors available Dimensions Conveyor 1, 3240mm closed x 560mm wide double plastic rollers, height 680mm fully adjustable Conveyor 2, 750mm closed - 2160mm fully open x 500mm wide steel rollers, height 8000mm fully adjustable Conveyor 3, 1350mm closed - 4500mm fully open x 500mm wide plastic rollers, height 770mm fully adjustable

Condition: new, R425-1G4S7 NSK TAPERED SINGLE ROW ROLLER BEARINGS Godpfx Ajqpf T Ieb Deit NEW, NEVER USED Main Demensions: 425 x 700 x 150 mm Weight 216 kg 2 units available WAREHOUSE LIQUIDATION

Year of construction: 2012, condition: new, TIMKEN TAPERED ROLLER BEARINGS NP342204-90WA2 NEW NEVER USED 14 UNITS AVAILABLE WEIGHT 320 KG/ EACH PACKED INTO ORIGINAL WOODEN BOX WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: 22324 EDK FAG x2 un. 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 23224 HL BM S x1 F36204 FAG x3 STF374KV5051GAS3 NSK x3 Godpfx Aboqpd Snj Doit 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6 PRICE FOR NEGOTIATIONS

Condition: new, STF374KV5051GAS3 FOUR ROW TAPER ROLLER BEARINGS NSK NEW, NEVER USED Main Demensions: 374,65 x 501,65 x 250,83 mm Weight 156 kg Gsdpjqpfvbofx Ab Deit 3 units available WAREHOUSE LIQUIDATION

Condition: excellent (used), Year of construction: 2020, Rex Cutting System RSS70 The Rex Cutting System RSS70 is a perfect as a stand alone cutting device equipped with a three edged sickle knife that separates the sausage as the twist section perfectly with no rip to the product. Made from stainless steel ensuring it can be easily cleaned, the REX RSS70 is a highly successful cutting performance machine using either natural or artificial sausage casing. Gjdpfxoyq Nmas Ab Deit Simple and easy to use large touch screen PLC. Specification Throughput : up to 1200 cuts/min Portion Lengths : Min 40mm Max 800mm Calibre Range : 14 to 40mm Weight 260kg Perfect with all types of sausage filling.

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm Giodjw A Iiljpfx Ab Det X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, pipe diameter (max.): 9,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, model: GS-HG Maximum length of pipe: Gedpfxswwqvwe Ab Djit