Used Shave for sale (115)

Condition: used, mileage: 384,700 km, power: 375 kW (509.86 HP), first registration: 06/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: air conditioning, navigation system, parking heater, * 12-speed automatic transmission * Electronic braking system (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary water retarder Bsdpoxnfpqofx Acnjll * Wheelbase: 3,700 mm * Comfort driver's suspension seat * Upper comfort bed, wide, adjustable * Lower comfort bed * Lower mattress, PremiumComfort * Shaving mirror * Electrically operated sun blind, single piece * LED ambient lighting for driving and living * Standalone air conditioning system, electric * Automatic climate control * Residual heat utilization * Additional hot water heater, driver's cab * Additional cab insulation * Electrically operated sliding/tilting glass roof * Fleet Management System (FMS) interface * Trailer socket, 24 V, 15-pin * Illuminated Mercedes star * BigSpace cab, 2.50 m wide, flat floor * Lockable air deflector with end flap * External transparent sun visor * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Driver's seat heating * Tyres: 315/70 R 22.5 * Rear axle tyres: 315/70 R 22.5 * Air suspension, rear axle * Navigation system * 570-litre fuel tank * 60-litre AdBlue tank * 430-litre fuel tank * Automatic high/low beam and cornering light * Engine: OM 471, inline 6-cylinder, 12.8 l, 375 kW (510 hp), 2500 Nm * Euro 6 D emission standard * High Performance Engine Brake * Safety Pack * Chrome interior package * Climate Package * Comfort Package * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Driver airbag * Cruise control * Actros model generation 5 * Refrigerator drawer under bed * EBS * Without spare wheel ----Sale only to commercial customers! No guarantee for the details! Subject to prior sale! Our general terms and conditions apply exclusively! We are happy to provide you with a leasing or financing offer.

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Bedpfxsimv N Ts Acnell

Condition: used, mileage: 320,600 km, power: 375 kW (509.86 HP), first registration: 07/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, navigation system, parking heater, * 12-speed automatic transmission * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Secondary oil retarder * Wheelbase 3,700 mm * Driver's air-suspended seat, comfort * Comfort upper bunk, wide, adjustable * Comfort lower bunk * Lower bunk mattress, PremiumComfort * Shaving mirror * Electric sunblind, 1-piece * LED ambient lighting, for driving and living area * Stand-alone air conditioning, electric * Waste heat recovery system * Auxiliary water heater, cab * Noise and heat insulation, cab * Electric sliding/lift sunroof, glass version * Seat lowered by 40 mm * Interface, Fleet Management System (FMS) * Trailer socket 24 V, 15-pin * Illuminated Mercedes star * BigSpace cab, 2.50 m wide, flat floor * Long cab * Cab width 2.50 m * Air deflector, lockable, with end flap * External sun visor, transparent * Air horn * MirrorCam * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Driver's seat heater * Tires 315/70 R 22.5 * Tires 315/70 R 22.5, rear axle * Air suspension, rear axle * Navigation system * Fuel tank 570 liters * AdBlue tank 60 liters Bjdszxvauepfx Acnell * Fuel tank 430 liters * Automatic high/low beam and cornering lights * LED turn signals in light signature * Engine OM 471, R6, 12.8 l, 375 kW (510 hp), 2500 Nm * Engine version Euro 6, E * High Performance Engine Brake * Transmission oil cooler * Safety Pack * Climate Package (in conjunction with noise/heat insulation) * Actros L * Chrome package, interior * Comfort Package * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Keeping Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Airbag, driver * Cruise control * Actros model generation 5 * Refrigerator in drawer under bunk * EBS * No spare wheel ----For sale to commercial customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will be happy to provide you with a leasing or financing offer.

Condition: ready for operation (used), functionality: fully functional, operating hours: 3 h, overall weight: 36 kg, Keep your workshop tidy and free of wood dust and shavings with this wall-mountable extraction fan. The Holzmann FAN2200 moves 4,000 m³/h of air through a 2.2 kW 400V three-phase motor and can be wall-mounted to save floor space. It is fully functional and ready for use. Minor cosmetic dents on the top housing and inlet are clearly visible in the photos and do not affect operation. Optionally available with a matching hose, reducers, blast gate, connectors, and clamps for a ready-to-connect 160mm ducting system. Only one unit is available – once it’s sold, it’s gone. The Ø160mm pipe/hose accessories may be sold separately. Best for: workshop extraction of wood dust and shavings, moving dust-laden air over short duct runs in areas with limited floor space. Not suitable for: explosive dust atmospheres requiring ATEX certification (unless independently verified), wet material, or long duct runs without a properly sized system. What the specifications mean in practice: • 4,000 m³/h extraction capacity – moves a high volume of dust-laden air, sufficient for several machines. • 1,900 Pa negative pressure – pulls through hoses and bends, not just short, straight pipes. • 200mm inlet / 180mm outlet – connects to standard workshop ducting, reducible to 160mm with the optional kit. • Wall-mountable, 36 kg – frees up floor space in a small workshop. • 2.2 kW 400V motor, S1 rating – designed for continuous operation, not short bursts. • 85 dB(A) sound power – plan for hearing protection or mount it outside the working area. Optional complete connection package (+CHF 250): 10m PU hose NW160, 2 reducers Ø200/160, 1 blast gate Ø160, 2 hose connectors Ø160, 3 pipe clamps Ø160, 2 hose clamps Ø150-170, all Holzkraft, and all matched to this fan. Technical data: – Model: Holzmann FAN2200_400V – Motor power (S1): 2.2 kW – Voltage: 400V/3-phase/50Hz – Extraction capacity: 4,000 m³/h – Impeller diameter: 330mm – Negative pressure: 1,900 Pa – Sound power: 85 dB(A) Bsdpfx Acozx D Dnenoll – Port: 200mm (in)/180mm (out) – Dimensions: 575x585x705mm – Weight: 36kg net/38kg gross Condition: Used, fully functional. Minor cosmetic dents on the top housing and inlet (present upon arrival) – see photos. Location: Stanserstrasse 50, 6064 Kerns (self-pickup, transport by arrangement). Buy with confidence: fully functional and ready for use; dents were present when we purchased it and are shown in the photos, so there will be no surprises upon pickup. A functional test is possible before pickup; photos of the nameplate and a video of it running are available. In-person inspection in Kerns OW by appointment. Why buy now: single used unit available, not stock. The Ø160mm accessory package is a one-time set and may be sold separately to another buyer. First-buyer bonus: free functional test run before pickup, plus the Ø160mm blast gate and hose clamps from the accessory set, at no extra cost. Valid until September 9, 2026, or until sold. Action: send your intended application, required capacity, and destination – we will confirm suitability and provide a transport estimate.

Condition: used, Second-hand radial fan for extracting wood dust, wood shavings or similar materials. Bedpfxezu Nibo Acnsll

Condition: used, mileage: 10,200 km, power: 350 kW (475.87 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,700 mm, color: grey, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, navigation system, traction control, Color: lias gray, permissible total weight: 18000 kg, seats: Alcantara Dinamica, black, driver's seat, interior color: anthracite, air suspension, 1 x airbag, retarder: secondary oil retarder, electronic stability program ESP, traction control ASR, automatic climate control, auxiliary air conditioning: electric, driver's seat with air suspension, armrest driver/passenger, leveling system: comprehensive leveling system 2nd position, LED headlights: matrix headlights, cornering lights, digital radio reception DAB, USB connection, sound system, telephone preparation, lane keeping assist, reversing camera, rain sensor, leather steering wheel, power steering, glass sliding/lifting sunroof, electric, tire pressure control, immobilizer, central locking with remote control, tinted glass: with band filter, underrun protection, CB radio, twin tires, work lights: 1x LED at the bottom in the center, 2x at the bottom on the right and left, ambient lighting: driving and living area in LED, LED daytime running lights, adaptive high beam assist, turning lights, insulated cab: sound and heat insulated, light sensor, ATTENTION ASSIST, digital instrument cluster, speed limiter: 90 km/h, traffic sign recognition, side paneling, digital exterior mirrors: MirrorCam, . ExtraLine ProCabin . Driver's comfort suspension seat with climate control, passenger's functional seat, driver's seat backrest release, table on passenger side, comfortable upper bed with wide leveling, ExtraPremiumComfort mattress for upper and lower bed, mattress topper for comfortable upper bed, wide, and lower bed, switch for MirrorCam on the bed, curtain across the bed(s), drawers under the bed and railing, 2 LED reading lamps with swan neck, laptop holder, shaving mirror, single-piece electric sun blind for windshield, sun blind on the driver and passenger side, flexible shelving system for storage above the windshield, storage trays for storage compartments, ProCabin-Big, flat floor, carpet for engine tunnel, hot water auxiliary heater with waste heat recovery, compressed air connection in the cab, multimedia cockpit Interactive 2, digital tachograph, tachograph calibration. Bodpezwq Nnefx Acnsll

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with HF motor 0.35 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : Blodpfod R U Agjx Acnol →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surf

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® VS Medi offers a robust and powerful platform for a wide range of screening tasks. With two vibrating motors, it is particularly practical for recycling companies and businesses in the construction, agricultural, and gardening sectors where many different materials need to be processed within tight time frames. Additional elements such as bars, hoppers, support feet, and a separating plate can also be installed on the machine (the separating plate is only required for the double-deck vibrating screen, as shown in the images). Upon customer request, it is also possible to install screens with different mesh sizes and shapes, or perforated plates with different perforations. We offer the ASCO® VS Medi vibrating screen as a single-deck or double-deck screening system. All loose materials are possible, such as excavated soil, humus, soil, compost, wood chips, bark mulch, sand, gravel, construction rubble, recycled material, crushed stone, scrap, and metal shavings. Technical specifications: Blsdpfstrfn Hsx Acnol - System capacity: 20-60 t/h - Maximum bucket width: 2.3 m - Screening area: 5.4 m² - Drive power: 400 V / 2 x 0.75 kW - Weight: 1240 kg - Width: 2.54 m - Length: 1.56 m - Height: 2.49 m - Loading height: 2.13 m Options: - Rods - Hopper - Support feet - Separator plate

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Blsdpfx Acoxrdhajnjl Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Motor power 2.2 kW / 50 Hz Airflow (without filter) 3900 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: new, Year of construction: 2025, DCV6000E Industrial Dust Collector The DCV6000E is an advanced industrial dust collector designed for the efficient extraction of wood chips, shavings, and dust from multiple workstations simultaneously. Engineered for continuous, heavy-duty operation in manufacturing environments, it delivers consistent suction performance and maintains excellent air quality throughout the production facility. Its reinforced construction and dynamically balanced impeller ensure quiet, reliable, and low-maintenance operation. Key Features Exceptional extraction capacity of 6,000 m³/h, ideal for operating multiple machines simultaneously Ø250 mm inlet port providing high airflow capacity and compatibility with centralized dust extraction systems 28 polyester filter cartridges with 5-micron filtration and a total filtration area of 14 m² Ceiling-mounted design for space-saving installation and easy system expansion Sealed waste bag replacement system for clean and convenient maintenance Energy-efficient operation thanks to an optimized fan blade design and a highly airtight extraction system Construction and Technology The DCV6000E is built with a heavy-duty hardened steel housing designed to withstand deformation and minimize vibration. At the core of the system is a dynamically balanced metal impeller, reducing noise while ensuring stable operation under high airflow conditions. The large-surface polyester filter cartridges effectively capture dust particles as small as 5 microns. An optional HEPA filtration system is available for applications requiring the highest air quality standards. Performance and Efficiency Powered by a 3.8 kW (S1) motor operating at 3,000 rpm, the DCV6000E achieves an air intake velocity of 28–32 m/s. This enables efficient dust extraction for multi-machine woodworking lines and automated production systems, regardless of workload intensity. The unit is designed for continuous-duty operation, maintaining stable performance throughout extended production cycles. Applications The DCV6000E is ideally suited for furniture manufacturing plants, industrial woodworking facilities, CNC production lines, and other environments where large volumes of wood dust are generated. The unit is compatible with: Sliding table saws and panel saws Wide belt sanders Edge banders and planers CNC woodworking machines Standard Equipment 28 polyester filter cartridges (5-micron filtration) Galvanized steel housing Metal impeller and extraction chamber Sealed waste collection bags Optional Equipment HEPA filter Extraction hoses and system manifolds Waste container fill level sensors Technical Specifications Specification Value Motor Power (S1) 3.8 kW / 400 V, 50 Hz Motor Speed 3,000 rpm Airflow Capacity 6,000 m³/h Bedpfxjuc U Nbj Acnjll Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø250 mm Air Intake Velocity 28–32 m/s Total Filtration Area 14 m² Number of Filters 28 Filter Material Polyester, 5 microns, Filter Class "G" Overall Dimensions (L × W × H) 2000 × 625 × 2150 mm Weight 262 kg

Condition: used, mileage: 35,700 km, power: 350 kW (475.87 HP), first registration: 04/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Special equipment: Storage above windshield, lockable, Axle load - measuring device, Axle load front axle 8.0 t, Working lights, Audio system: Digital radio DAB / DAB+, Equipment package: Economy, Equipment package: Climate, Equipment package: Comfort, Equipment package: Media, Equipment package: Safety, Equipment package: Visibility, Exterior mirror right with maneuvering position, CB radio, Compressed air horns (2) on cab roof, Electrical pre-equipment in cab 24V / 100 A, Cab: Extra-Line interior, Cab: Style-Line interior, Cab: with air suspension, Cab: Shaving mirror, Fzg. without MirrorCam exterior mirror camera, 12-speed gearbox - type: G 281-12, Integral rear, Folding table in parapet, Comfort telephony (Bluetooth) with induction charging cradle, Comfort couch top, wide, 3-piece mudguards, Fuel tank: Combi tank aluminum - 720 l diesel + 75 l urea solution (AdBlue), Fuel tank: Additional tank 290 l aluminum, right-hand side, Steering wheel with multifunctional steering wheel, Fuel tank: Additional tank 290 l aluminum, right-hand side, Steering wheel with multifunctional steering wheel. aluminum, right, steering wheel with multifunction (leather), mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, engine brake reinforced, auxiliary drive MB 131-2c, on-board unit for toll collection, wheelbase variant 3700 mm, frame height lowered 25 mm, smoker package, residual heat utilization, retarder, reversing alarm acoustic and hazard warning light (warning signal outside), fifth wheel coupling: Low-maintenance, lubricated lock, key with additional remote control (2), fleet management system interface, drawers under sill, power steering Servotwin, seat cover/upholstery: passenger seat leather, seat cover/upholstery: driver's seat leather, seats in cab: Armrests on both sides of front passenger seat, Seats in cab: front passenger seat Swivel seat comfort, Seats in cab: front passenger seat backrest can be folded down, Seats in cab: driver's seat with massage function, Seats in cab: driver's seat Swivel seat comfort, Sunblind electr. for windscreen, sun blind side windows, driver and passenger door, sound system, storage flap outside left, additional 12V / 15 A socket in passenger footwell, additional 12V volt socket, preparation / switch for lift axle on semitrailer / trailer, preparation for work lights on rear wall of cab above, preparation for additional headlights, curtain for sleeper cab, seat belt warning device Blodezuhx Iepfx Acnol Further equipment: EURO 6 emissions standard, Axle configuration: 4x2, Actros 5, Actros cab L, Heated approach/front mirror, Trailer electrical and brake connection low, Trailer socket 24V / 15-pin, Access to cab left, Exhaust to right outside, Equipment package: Powertrain 2, Batteries arranged side by side, Differential lock rear axle, Torque increase 12. Compressed air connection in cab, Compressed air tank steel, Compressed air unit with condensation water monitoring, Compressed air unit medium, Automatic switch-on for headlights (light sensor), Driving assistance system: Attention Assist (drowsiness detection sensor), Driving assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5), Driving assistance system: Lane departure warning system, Cab: rigid cab access, Cab: chrome interior package, Cab: hydraulic tipper, Cab: L BigSpace, 2.50 m, level floor, Vehicle clearance lights LED, Suspension: air / air (full air), Electric windows, Tinted windscreen, Fzg. without rear window, alternator 10

Condition: used, mileage: 96,875 km, power: 400 kW (543.85 HP), first registration: 03/2025, fuel type: electric, maximum load weight: 8,379 kg, overall weight: 20,000 kg, axle configuration: 4x2, wheelbase: 4,000 mm, color: blue, driver cabin: sleeper cab, gearing type: other, emission class: euro6, suspension: air, Year of construction: 2025, Equipment: ABS, air conditioning, cruise control, traction control, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is stated, it is based on the current daily exchange rate. The applicable currency is that of the vehicle's location. Axle configuration: 4x2, Predictive Powertrain Control, alloy wheels, alloy wheels (duplicate in listing), tire pressure monitoring system, electronic parking brake, wheelbase 4000 mm, L-cab, cab width 2.50 m, GigaSpace, cab tilting system, electro-hydraulic, MirrorCam, comfort central locking system, leather steering wheel, PremiumComfort mattress, lower and upper, shaving mirror, refrigerator in drawer under bed, electric auxiliary air conditioning, automatic climate control, air-sprung driver's seat, electronic braking system with ABS and ASR, illuminated Mercedes star, rain sensor, LED tail lights, lane keeping assistant, distance control assistant, attention assistant, traffic sign assistant, cruise control. Vehicle is in current operation, so mileage may change. Bsdpszllkvefx Acnell

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Bjdpfx Acsv Sk Tmonsll High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: excellent (used), Year of construction: 2004, Cap - Shaving cream dispenser Bedpfxoc Nw Rhj Acnoll 10x compartment Year of manufacture: 2004 Very good condition

Condition: new, functionality: fully functional, Year of construction: 2025, The ASCO® SD MINI screening drum features a foldable design and is a semi-mobile unit. Equipped with a vibration motor, it is particularly practical for recycling operations, as well as in the construction, agricultural, and gardening sectors where many different materials need to be processed. The innovative mobile trommel screen from ASCO®Screen. The variable height adjustment makes it easy to handle and transport. Screening a variety of materials is effortless, whether you load the machine manually or with the help of an excavator. In both cases, the screened material can be transported via the conveyor belt after the process. The screened material is distributed over and under the entire length of the drum, while oversized material is ejected at the rear of the machine. Efficient processing of various materials in recycling operations. Economical use in construction, agricultural, and gardening operations where space is limited. Flexible use thanks to numerous adjustment options. High performance and capacity for impressive screening performance. Versatile material separation of coarse particles, shavings, compost, soil, bark mulch, pellets, wood chips, gravel, building demolition materials, and plastic. Technical Specifications: Screen length: 1.49 m Usable screen length: 1.25 m Outer diameter of the screen drum: 0.8 m Usable screening area: 3.15 m² Screening capacity: 5 - 40 t/h Mesh size: Ø4 - Ø100 mm Hopper opening: 1600 x 760 mm Bucket width: 1.5 m Speed (adjustable): 5-20 rpm Drive power: 400 V / 2.2 kW Filling height: 1.5 - 1.86 m Weight: 600 kg Highlights: - Vibration motors for emptying the hopper - Three different drum versions - Drum rotation in both directions Bedpfx Acer Nbxysnell - Cleaning brush - Easy drum replacement - Single-wheel drive - Hour meter - Adjustable height / supports with wheels and without wheels

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Bsdpfx Acsxtfv Isnoll Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Condition: new, Year of construction: 2026, DCV7500E Industrial Dust Collector The DCV7500E is a premium-class industrial dust collector engineered for demanding manufacturing environments. Its robust construction, exceptionally high extraction capacity, and advanced filtration capabilities make it the ideal solution for large woodworking facilities requiring clean air, reliable performance, and continuous-duty operation. Key Features High extraction capacity of 7,500 m³/h, ideal for operating multiple machines simultaneously Large 18 m² filtration area for efficient capture of fine dust particles 35 polyester filter cartridges with 5-micron filtration for improved air quality throughout the production facility Heavy-duty steel construction designed to withstand vibration and intensive industrial use Dynamically balanced metal impeller ensures smooth, quiet, and reliable operation Construction and Technology The DCV7500E is equipped with a Ø280 mm inlet port, providing exceptionally high airflow capacity for centralized dust extraction systems. Its metal impeller features aerodynamically optimized blades that maximize extraction performance while reducing noise levels. The airtight extraction system minimizes air leakage and efficiently separates wood chips, shavings, and fine dust particles, ensuring high operating efficiency. Performance and Efficiency Operating at an air intake velocity of 28–32 m/s, the DCV7500E delivers highly effective dust extraction even under fluctuating production loads. Powered by a 5.5 kW motor running at 3,000 rpm, the unit maintains consistent suction performance throughout continuous operation, regardless of the number of connected machines. Applications The DCV7500E is ideally suited as a centralized dust extraction system for woodworking factories and industrial production facilities operating equipment such as: Bjdpfx Aovzqtxocnjll Belt sanders and wide belt sanders Sliding table saws and panel saws Spindle moulders Edge banders and planers Automated woodworking production lines The unit is not intended for extracting wet materials or for use in hazardous or potentially explosive environments. Standard Equipment 35 polyester filter cartridges (5-micron filtration) Ø280 mm inlet port Sealed waste collection containers Optional Equipment HEPA filter for capturing ultra-fine dust particles Automatic filter cleaning system Overhead ducting system for centralized installation Technical Specifications Specification Value Motor Power 5.5 kW / 400 V Motor Speed 3,000 rpm Airflow Capacity 7,500 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø280 mm Air Intake Velocity 28–32 m/s Total Filtration Area 18 m² Filter Material Polyester, 5 microns, Filter Class "G" Number of Filters 35 Overall Dimensions 2800 × 970 × 2260 mm Weight 306 kg

Condition: new, machine/vehicle number: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Blodpfx Aoyr I Hujcnsl Variable container dimensions (customizable to customer requirements) Left- or right-hand configuration Hydraulics with separate oil tank All model series also available as “DUO” variants Wood chips, sawdust, wood shavings, etc. are generated in all woodworking and industrial processing businesses. Every day, storage and transport costs for these materials are significant. Briquetting presses offer the ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of spontaneous combustion is significantly reduced. Briquetting presses require little space, are robustly constructed, and equipped with low-maintenance technology. Whether wood, paper, biomass, foam, or polystyrene – the ZBP series briquettes any suitable material. With a throughput capacity of up to 35 – 130 kg/h, they are particularly suitable for small and medium-sized enterprises. Flexible installation options thanks to the availability of left- and right-hand designs. So start briquetting today!

Condition: used, power: 1.1 kW (1.50 HP), input voltage: 380 V, volume flow: 2,000 m³/h, intake manifold diameter: 140 mm, filter area: 1.65 m², total height: 1,900 mm, total length: 1,100 mm, total width: 650 mm, overall weight: 50 kg, extraction connection diameter: 140 mm, nominal flow rate: 2,000 m³/h, negative pressure: 1,800 Pa, nominal power: 1.1 kW (1.50 HP), space requirement height: 1,900 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, transport length: 1,100 mm, transport width: 650 mm, transport height: 1,900 mm, No. 3258 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Bsdpfox Hi Rxjx Acnell Terms of delivery: ex location

Condition: new, Year of construction: 2026, The most powerful centrifugal fan, the FAN5.5, achieves a capacity of up to 7419 m3/h. The design of the new technology line has enabled us to develop the LineWind metal turbine system. This is the most important feature of the radial fans, enabling them to extract all sorts of pollutants with increased vacuum power, thanks to a special blade system that has been profiled at an appropriate angle. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of shavings, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 7419 m3/h inlet diameter 300 mm discharge diameter 250 mm Bodevugh Espfx Acnsll PRESSURE 2014 - 1320 Pa DIMENSIONS 750x750x830 mm MOTOR POWER / VOLTAGE 5.5kW WEIGHT 110kg

Condition: used, A compact and lightweight portable extraction system for removing wood shavings and sawdust. Bodpfx Aoztvwvjcnoll Technical data: - Motor: 0.37 kW - Length: 650 mm - Width: 500 mm - Height: 1,800 mm

Condition: used, Type: Treif Divider Type 2550 Slices are precisely stacked on top of each other even when the stacks are 100mm high The slicer can also be equipped with the automatic shaving function upon request The machine can also accommodate the off-set delivery of products such as cheese Compact and space-saving design ensures optimum utilization of space-saving High degree of flexibility: Product can be changed without mechanically changing the system Special solution: expanded chamber up to 220 mm to accommodate Italian Mortadella for example Bjdpohwtptsfx Acnoll Dimension of the machine Length: 210 cm Width: 80 cm Height: 210 cm Electrical power: 4.8kW Delivery time: 30 working days after payment

Condition: good (used), Used machine, good condition. Delivery time appr. 7 weeks after ordering The basic machine starts at 135.000 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Bjdefmqq Eepfx Acnoll Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160, Holzkraft For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft Chip collection volume: 2 x 165 l Nominal outer diameter of the extraction nozzle inlet: 160 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level max.: 73 dB(A) Volume flow Nominal volume flow: 1448 m³/h Dust class: H3 Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Bsdshkzttepfx Acnjll Connection cable 5 m with CEE plug, 5-pole, and phase inverter Two swivel casters and two fixed casters with parking brake Manual cleaning Art. No. 5131620 Location: Available in stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Holzkraft Dust Extraction System RLA 210 For wood dust and shavings, designed for commercial use Article number: 5132100 Brand: Holzkraft Dimensions and Weights Chip collection volume: 2 x 165 l External diameter of the suction nozzle inlet: 200 mm Length approx.: 1755 mm Width/Depth approx.: 830 mm Height approx.: 1800 mm Weight approx.: 259 kg Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise Emission Maximum sound pressure level: 72 dB(A) Volume Flow Nominal volume flow: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with a small footprint Maximum performance in this class Very quiet All models with a collision guard Application Area Designed for commercial use For all woodworking machines with a corresponding suction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Suction nozzle can be easily repositioned from left to right, allowing for flexible use Large inspection openings Large-sized, mobile chip containers with a clamping bracket and chip collection bag Dust extractor is completely assembled upon delivery, allowing for quick deployment All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to large filter area Description of the Filter Ultra-compact with maximum filter area Bodpfshk Dfrox Acnell Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life Filter is standard, antistatic, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control box The fan is located downstream of the filter Equipment Details With a novel locking device for secure container positioning Location: In stock at warehouse 54634 Bitburg - available for immediate delivery -