Used Hurth for sale (27)

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Gbslhccqst Hwnvjqep Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: excellent (used), Functionality: fully functional, GEAR SHAVING Make: Hurth Gjlov E Efkehccqqebp Model: ZSA 220 Max module: 6 Max gear diameter: 220 mm Logitudinal travel: 150 mm Transversal travel: 20 mm Max tool diameter: 260 mm Lead angle: ± 23° Machine approx weight: 4800 Kg

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Gslhcowrh H Nocqqsbp Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: ready for operation (used), Functionality: fully functional, overall weight: 480 kg, The Clark-Hurth Spicer 13.5 HR 28369-1 Gearbox is a heavy-duty transmission system for industrial and off-highway applications. Known for its durability, high torque capacity, and reliable performance, this gearbox is widely used in construction equipment, material-handling vehicles, and other demanding industries. Application: Industrial vehicles, loaders, forklifts, mining machinery, and construction equipment Compatibility: Fits various heavy-duty machines requiring a Clark-Hurth Spicer transmission system Maintenance: Low maintenance with high efficiency Additional Information PDF Brochure Available (Contact us for details) Application: Industrial vehicles, loaders, forklifts, mining machinery, and construction equipment Compatibility: Fits various heavy-duty machines requiring a Clark-Hurth Spicer transmission system Maintenance: Low maintenance with high efficiency Recommended Applications ✔ Material handling & logistics ✔ Construction & mining machinery Gbslhccev Eagpsqqep ✔ Off-highway vehicles ✔ Heavy-duty transport equipment Why Choose This Gearbox? ✅ Genuine Clark-Hurth Spicer OEM part – Ensures perfect fit and performance ✅ Robust and durable construction – Designed for heavy industrial use ✅ Smooth and efficient power transmission ✅ 1 piece In-stock & ready for dispatch Clark Hurth transmission,wheel loader gearbox, industrial gearbox, heavy machinery parts, powertrain, reduction gearbox, drive train, loader gearbox

Condition: used, Year of construction: 1998, max. wheel diameter 200 mm gear width 140 mm max. module 5 workpiece length - max. 400 mm external diameter min. 20 mm control Siemens Sinumerik max. tool diameter 270 mm Max. mould width 50,8 mm Distance of shafts min/max. 120/230 mm axial cross angle -18 / -21 ° shaving wheel spindle turning speeds max. 400 U/min weight of the machine ca. 5,5 t dimensions of the machine ca. 3,6 x 2,6 x 3,3 m The ZSE 150 scraping machine is used in small and medium series production as a universal scraping machine with a deburring unit on the back. Compact and easily accessible, all operating elements and the work area are easy to reach from the operator's location. A large operator door provides unhindered access to the work area. This enables simple and quick conversion and tool changing processes. This machine is equipped with a pallet ring magazine. Gbslhccqjvtgq Rsqep Regardless of whether it is for plunge, diagonal or parallel feed or for corrections such as conicity or crowning, all feeds and correction movements are carried out by the scraping head. The simple automatic loading due to the stationary workpiece is also the result of this machine concept and enables the construction of an extremely stable machine bed. This in turn is a basic requirement for achieving the highest gearing qualities. The CNC control controls the axes according to the attached sketch. Machine dealer with own stock of 1600 m².

Condition: like new (used), Year of construction: 2010, max. wheel diameter 210 mm gear width 350 mm max. module 4 min. module 0,3 Control Siemens 840 D Powerline turning speeds 300 - 4000 U/min maximum axial offset 300 mm tailstock adjustment 350 mm swival range +/- 40 ° total power requirement 46 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 6,2 x 2,9 x 3,5 m Genesis 210HiC - Vertical Hobbing Machines with Optional Chamfer Rolling. The Genesis Hobbing Machines with vertical workpiece axis offer highly productive gear hobbing with optional chamfering and deburring capability. Workpiece diameter, max. 210 mm. Module, max. 3/4* mm. Gbolju A I Dbshccqqep Workstation consisting of: -- Gleason milling machine "Genesisi 210 HIC" -- Borries embosser 315 WP-C -- Promot-Automation "loading and unloading unit"

Year of construction: 1975, Condition: used, max. wheel diameter 280 mm Gelhcst Hw Dkjcqqebp max. number of teeth 100 max. module 6 min. module 1 total power requirement 6 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2004, operating hours: 26,583 h, Functionality: fully functional, machine/vehicle number: A0248, workpiece diameter (max.): 130 mm, TECHNICAL DETAILS Workpiece diameter (max.): 130 mm Number of axes: X, Z, A, B, C (0–3) Golswmc Idehccqqjbp Electrical Power consumption: 47 kVA Voltage: 400 V Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: G0504, workpiece diameter (max.): 63 mm, travel distance Z-axis: 105 mm, outer diameter: 275 mm, distance between centers: 350 mm, swivel angle A-axis (min.): -30 °, swivel angle A-axis (max.): 30 °, TECHNICAL DETAILS Workpiece diameter: 63.5 mm Center distance: 350 mm Clamping surface length: 1,550 mm Number of T-slots: 2 T-slot width: 18 mm T-slot spacing: 180 mm Center height (tailstocks): 350 mm Pivoting range of the fine-tuning head (U-axis): +30 / -30 ° Tailstock/fine-tuning head center distance: min. 120 mm / max. 225 mm Input resolution (all NC axes): 0.001 mm / degree Control: SIEMENS 840D Feed slide Movement range (Z-axis travel): 105 mm Input resolution: 0.001 mm Tool Outer diameter: 225 - 275 mm Bore diameter: 160 mm Width: 60 mm Workpiece details Outer diameter: 40 - 150 mm Module: 1.25 - 4.0 mm Max. tooth width: 45 mm Speeds and feed rates Tool speed: max. 2,000 rpm Feed rate in Z direction: up to 2 m/min Feed rate in X direction: up to 2 m/min Feed rate in U direction: up to 2 m/min Feed rate in V direction: up to 2 m/min C3 direction: max. 12 °/s Servo drives Tool drive C1: 27.0 Nm at 3,000 rpm Workpiece drive C2: 27.0 Nm at 3,000 rpm X-axis: 20.0 Nm at 3,000 rpm Z-axis: 20.0 Nm at 3,000 rpm U-axis: 6.0 Nm at 3,000 rpm Vertical gantry (V1 axis): 6.0 Nm at 3,000 rpm Gripper rotation axis C3: 5.0 Nm at 3,000 rpm Loading slide (X1 axis): 5.0 Nm at 3,000 rpm Three-phase motors Hydraulic motor: 1.5 kW at 1,410 rpm Central lubrication: 0.07 kW at 2,700 rpm Coolant pump: 4 kW at 2,840 rpm Hydraulic equipment Flow rate: 21 l/min System pressure: 50 bar Headstock clamping pressure: max. 35 bar Gslhowmbmlsccqqjbp Tailstock clamping pressure: min. 20 bar / max. 35 bar MACHINE DETAILS Weight: 5,500 kg Space required: 2,700 x 2,300 x 2,600 mm Operating fluids Hydraulic fluid: HLP D 46 Hydraulic capacity: 100 l Electrical system Operating voltage: 400 V Control voltage: 24 V DC Lighting voltage: 230 V AC Frequency: 50 Hz Power requirement: approx. 27 kVA EQUIPMENT - Central lubrication system - Coolant pump - Capacitive distance system - Automatic workpiece clamping - Precision wheel head with U-axis - Machine with full hydraulic equipment - Dialog-guided operator terminal

Condition: used, Year of construction: 2010, max. grinding diameter 400 mm 18010 Gbslhsmnug Ueccqqjp shaving cutter - diameter 64 - 320 mm indexing schleifbar 1 -12 Modul shaving wheel width max. 40 mm number of teeth 13 - 240 roller bend diameter min./max. 73 - 320 mm slide speeds 5-20-30-40 Zähne/min. max. dia. of grinding wheel 762 mm grinding wheel - swivable 5-21 ° grinding slide swivable +/- 2 x 35 ° total power requirement 3 kW weight of the machine ca. 4,2 t

Year of construction: 2019, Condition: as good as new (ex-display), Rolling burr tool Make Gleason - Hurth Type:CH7M5R - 7B340-B1A 200 mm diameter unused is delivered in a wooden box Gbjljfgwt Ejhccqqsp Weight 9,5 kg

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm Gbjlhcoul El Tjcqqep X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Year of construction: 1991, Condition: used, max. wheel diameter 0 mm max. number of teeth 0 max. module min. module Gbjlhjt Hwv Heccqqjp total power requirement kW weight of the machine ca. t dimensions of the machine ca. m CNC controlled milling machine for synchronous rings

Year of construction: 1970, Condition: ready for operation (used), A total of four metalworking machines are available. 1) Carl Hurth LFV 3. 2) Hagen & Goebel HG-23N. 3) Stankoimport 2H55, year of manufacture: 1970. 4) Busch Maschinenfabrik FSV 5, year of manufacture: 1965. On-site inspection is possible. Individual sale possible. Gelhccewkuzqsqqobp

Condition: good (used), Year of construction: 2004, operating hours: 26,583 h, Functionality: fully functional, machine/vehicle number: A0248, workpiece diameter (max.): 130 mm, Give. CNC gear shaving machine Make: GLEASON HURTH Type: ZS130 T Golheuyxyzsccqqobp Year of manufacture: 2004 Machine no.: A0248

Year of construction: 1988, Condition: used, weight of the machine ca. 5 t working width max. 300 mm 6 extensive accessories viele Wechselräder Gelhovrk Ecoccqqobp +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2014, max. wheel diameter 20 - 320 mm gear width 150 mm Gbjlhcsv Nracecqqsp max. module 8 min. module 1 surface area 1200 x 190 mm tool diameter 175 - 260 mm turning speeds 45 - 465 U/min total power requirement 13 kW weight of the machine ca. 5,2 t

Condition: used, Year of construction: 1978, Technical details: table surface area: 1970 x 400 mm distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) axial adjustment: manuell = 150 mm quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55 mm - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools * Gelhcsu Ndhiecqqobp

Condition: ready for operation (used), GEAR HOBBING, HURTH – WF 280 Max. Workpiece dia: 300 mm Max. module: 6 Max. hob face width for spur gears: 250 mm Min. number of teeth: 6 Helix angle: +50° /- 45° Working area Min./max. distance between cutter and table: 25 / 260 mm Gbolhccqjv I Nkvjqop Min. /max. distance work piece table – cutting axis: 200 / 450 mm Max. travel of hob slide: 250 mm Min. / max. distance between table and steady: 350 / 650 mm Max. travel of steady: 300 mm Table bore dia (Ø x depth): 100 x 315 mm Max. travel of shifting slide (Z-travel): 170 mm Space required, approx. 4.8 x 3.0 x 2.5 m Weight of the machine, approx. 13000 kg Other info: The machine is complete in all its parts and accessories

Condition: ready for operation (used), Year of construction: 1950, Sale only within the EU member states! Gjlhopz Ht Njccqqebp No private sale MAE can be viewed with pleasure. Any warranty right is excluded. For the correctness of the technical data and year of manufacture, for the completeness of accessories and tooling, as well as for the observance of all safety and environmental protection requirements mentioned in the and environmental protection requirements mentioned in the accident prevention regulations. Any warranty is excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tools Cyn79beasd as well as for compliance with all safety and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: excellent (used), The HURTH MODUL ZSTK 251 bevel gear planing machine was designed as a special machine and is used by manufacturers of drive systems in the drive technology, automotive, agricultural machinery, machine tools, mining technology, aviation and textile machinery sectors for the gear shaping of straight-toothed bevel gears with a short run-out. We still have 1 of these machines in stock, which, in conjunction with the Klingelnberg BF 203 bevel gear milling machine, can also produce crowned bevel gear sets in high quality. Technical data Gslhccsup T Rlsqqjbp Workpiece diameter: 315 mm Module max.: 10 mm Tooth width: 45 mm Dimensions: 2.7 x 2.3 x 2.1 m Weight: 7,000 kg *Information and data are non-binding and subject to prior sale Viewing under operating conditions possible after consultation.

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Gbelhceg Uq Dfecqqep Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: ZF/hurth forklift drive HFK 250 -Admission wheel: dimensions see pictures -Hole circle: Ø 270 mm M12 Gbjlhccqofuh Twsqop -Dimensions: 700/330/H285 mm -Weight: 69 kg

Year of construction: 2001, Condition: used, max. wheel diameter 40 - 160 mm gear width 90 mm control Siemens Sinumeric Gbslsmld Nmjhccqqop voltage 400 V frequency 50 Hz connected load 34 kVA loading 800 Euro

Year of construction: 2001, Condition: used, max. wheel diameter 40 - 160 mm gear width 90 mm Control SIEMENS SINUMERIC 840D Gear shaving - / deburring machine +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Gbelsl Sr Sujhccqqop Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++