Used Setup for sale (1,058)

Condition: used, Year of construction: 2007, operating hours: 3,339 h, machine/vehicle number: LC615, Used ELOPAK sks-s60S shikoku filling lineTechnical Specifications & Performance DataThis aseptic gable-top carton filling machine is engineered for high-integrity beverage packaging, delivering reliable performance for long-life products. Manufactured by Shikoku Kakoki in 2007, it operates with low accumulated hours and supports multiple carton formats for flexible production planning in industrial packaging and beverage production environments.Manufacturer: Elopak Shikoku KakokiModel: SKS-S60SYear of manufacture: 2007Operating hours: 3339Filling mode: AsepticContainer type: Gable-top cartonsCompatible formats: 0.5L, 0.75L, 1.0LElectrical supply: 400 V, 50 Hz, 3-phaseCurrent draw: 114 ACompressed air pressure: 550–990 kPaAir consumption: 2460 NL/minAdvanced Automation & Control SystemsDesigned for aseptic operation, this machine supports precision filling in a controlled sterile environment. Its three-phase industrial electrical configuration ensures stable operation and straightforward integration with plant utilities. Format changeovers across 0.5L, 0.75L, and 1.0L cartons are engineered to be efficient, helping reduce downtime and improve overall equipment effectiveness in second hand or refurbished installations.Industrial-grade controls for consistent aseptic performanceProcess parameters optimized for sterile packaging operationsOperator-friendly interface for setup and monitoringInterlocked access points and safety circuits for protected operationProduction Line Integration CapabilitiesThis aseptic carton filler integrates seamlessly within a used bottling line or new packaging configuration. It is well-suited for pairing with upstream carton preparation or sterilization modules and downstream cap closing, date coding, case packing, and palletizing equipment. The machine supports inline or standalone operation depending on plant layout.Interfaces with conveyors and downstream packaging machineryFlexible line positioning for greenfield or retrofit projectsMulti-format capability for 0.5L, 0.75L, 1.0L cartonsMachine Condition & Maintenance HistoryWith only 3339 operating hours, this second hand aseptic filler presents low wear relative to typical lifecycle expectations for industrial packaging equipment. Its configuration and utilities align with common European plant standards, supporting rapid recommissioning by qualified technicians.Low operating hours indicating limited duty cycleWell-preserved aseptic configurationOperational Performance & VersatilityOptimized for aseptic beverage production, the machine is ideal for long-shelf-life products commonly packaged in gable-top cartons. Its multi-format capability enables agile product scheduling and SKU changes without extensive retooling.Aseptic filling for extended shelf lifeSupports standard gable... Gkjdpfeyz R E Tjx Ak Ueb

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm Gksdpfx Akozhv Rls Usb -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Condition: used, Year of construction: 2020, machine/vehicle number: MBI19, Used APSOL casepacking monoblock - year 2020Technical Specifications & Performance DataThe Apsol Automatic Case Packer from 2020 is engineered for reliable secondary packaging in industrial environments. Its robust construction and CE-compliant design ensure consistent performance with low downtime, making it an excellent choice for upgrading a used bottling line or enhancing a second hand industrial packaging setup. Each format has its own pick-up head, specific to the product. For the formats used the configuration was: 6x2.Manufacturer: ApsolYear: 2020Production speed: 7–9 boxes per minuteElectrical rating: 400 V AC, 50 Hz, three-phase (3ph+N+GND)Installed power: 26.5 kWFull load current: 49 AShort-circuit rating: 10 kAProtection class: IP54Compliance: CEAdvanced Automation & Control SystemsDesigned for dependable automation, this case packer supports stable, repeatable operations in demanding packaging environments. Electrical architecture provides balanced power distribution and protection to safeguard motors and drives. Operator access and safety interlocks help maintain productivity while ensuring safety.Three-phase electrical supply for industrial dutyCE-compliant design with integrated electrical protectionsIP54 enclosure rating for dust and splash protectionClear operator interfaces for straightforward setup and monitoringProduction Line Integration CapabilitiesThis machine integrates efficiently into beverage production and broader packaging machinery lines. It is suitable for inline installation downstream of fillers, labelers, and inspection systems, handling the transition from primary to secondary packaging with steady throughput. Its configuration supports synchronization with upstream conveyors and downstream case sealing or palletizing equipment.Seamless integration into bottling equipment and packaging machineryCompatible with upstream filling, labeling, and inspection modulesPairs effectively with case sealers, wrap-around packers, and palletizersAppropriate for upgrading a used bottling line or expanding an industrial packaging lineMachine Condition & Maintenance HistoryThe 2020 build and verified electrical data indicate a modern platform suitable for immediate deployment. Offered as a second hand industrial packaging solution, it is presented in ready-for-operation condition to minimize commissioning time and accelerate line ramp-up.Operational Performance & VersatilityWith a capacity of 7–9 boxes per minute, this Apsol case packer delivers a balanced mix of speed and reliability ideal for small to medium throughput applications. The design focuses on stable case handling and consistent packing geometry, supporting quality-focused beverage production and general industrial packaging requirements.Consistent case handling for stable pack formationThroughput suitable for medium-speed production linesEngineere... Godpfx Akoy Uvhaj Ujkb

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Gkedpfszi Awhjx Ak Uob Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Gkjdpfszmv Dvjx Ak Uob Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading.

Condition: used, Year of construction: 2022, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK40 Gedpfjzhzarex Ak Uskb Spindle: Technology:Belt drive Speed:10,000 rpm Tool holder:SK40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Tableloading (max.):750 kg General: Tool magazine:40 stations Features/Accessories: Coolant Management:IKZ system with filter and high pressure, 20 bar Chip Management:Chip conveyor Workpiece Measurement:25.50-HDR Tool Measurement:Pick UP wireless 35.40 TS Position Measurement System:Heidenhain linear measurement system (direct) X/Y/Z Setup Mode:Electronic handwheel

Condition: excellent (used), Year of construction: 2020, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Professional handheld measurement system for precise 3D measurements directly in production environments. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a dedicated measuring room, complex setup, or special CMM expertise. The device is ideally suited for manufacturing operations, quality assurance, initial sample inspection reports (ISIR/PPAP), in-process controls, as well as for reverse engineering. Technical Data – KEYENCE XM-C1000 / XM-H1000 (XM Series) Measuring System (General) Specification: Measurement range (XYZ): approx. 600 × 300 × 200 mm (depending on setup) Measurement accuracy: ±(8 + L/80) µm (L = measured length in mm) Repeatability: ±3 µm (typical) Resolution: 1 µm Measuring principle: Optical tracking with camera-based detection Calibration: User calibration with calibration sphere possible CAD Comparison: Directly on the device (STEP, IGES, etc.) Export formats: PDF, Excel, CSV, DXF Tolerance analysis: Automatic with color mapping XM-C1000 – Control and Evaluation Unit (Controller) Component: Display: 15” touchscreen Connections: USB, LAN, HDMI, power Gkedpfx Aozii Dnok Usb Storage options: Internal + USB export Software functions: Measurement, CAD comparison, report generation Operation: Touchscreen + pushbutton operation Languages: Multilingual (including German) XM-H1000 – Handheld Probe Specification: Probe type: Handheld with pressure button Feedback: LED status indicator, vibration signal Probe tip: Interchangeable, various tips available Tracking: Detected via controller’s camera system System Characteristics Specification: Operating temperature: 10 – 35 °C Power supply: 100–240 V AC, 50/60 Hz System dimensions (complete): approx. 800 × 600 × 800 mm (depending on setup) Total system weight: approx. 25–40 kg (depending on configuration) Mounting: On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld probe XM-C1000 (Controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & Delivery: Shipping via freight forwarding Collection by appointment possible. International shipping available on request. If you have any questions, need further information or wish to arrange a viewing appointment, please feel free to contact us. (Subject to changes and errors in the technical data and information!) We are also happy to answer any further questions by phone.

Condition: used, Year of construction: 1995, operating hours: 26,000 h, machine/vehicle number: LC668, Used Tetra Pak TBA 8 V100 1000ml slim, helicap 23Technical Specifications & Performance DataThis second hand Tetra Pak complete aseptic carton filling line is configured for dairy production in slim 1.0L Brik carton packages. The core of the line is a Tetra Pak TBA 8 V100 filling machine, manufactured approximately in 1995 and showing approximately 26,000 working hours. A total refurbishment was completed in 2026, followed by a test run and inspection.Main filling machine: Tetra Pak TBA 8 V100Package format: Slim 1.0L aseptic carton packageSpeed: 6.000 TP/hProduct application: Dairy productionYear of manufacture: approximately 1995Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Advanced Automation & Control SystemsThe line is supplied as an integrated industrial packaging solution comprising filling, cap application, conveyor handling and wrap-around tray packing equipment. The Tetra Pak TCAP 45/47 cap applicator has been modified for HeliCap 23 and is designed to handle screw caps with pre-punched paper packaging material. The standard-layout conveyor installation provides product transfer between the listed process stages.Machines of this type are intended to operate as coordinated packaging machinery, enabling continuous movement of filled carton packs from the filler through closure application and secondary packaging. Final operational setup should account for the selected carton material, cap components, product process interface and required line controls.Production Line Integration CapabilitiesThis used bottling line is arranged for aseptic Brik carton handling rather than conventional PET or glass bottle processing. It combines a Tetra Pak filling machine with a dedicated screw-cap applicator, approximately 30 meters of conveyors and a tray packer for wrap-around trays. The equipment is suited to integration within a dairy beverage production and industrial packaging environment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1002001Capping MachineTetra Pak TCAP 45/47ConveyorsConveyorsWrap Around PackerTetra Pak TCBP 70The line can form a practical filling and end-of-line packaging section where cartons are filled, closed, conveyed and packed into wrap-around trays. Upstream dairy processing, hygienic product supply and downstream pallet handling can be matched to the requir... Gkodpfx Akezwu Uns Ueb

Year of construction: 2006, condition: used, functionality: fully functional, Complete Extrusion Line for Plastic Pipes Luigi Bandera / Graewe / Supertech Year of manufacture: 2006 For sale: Complete extrusion line for the production of plastic pipes. Installed in a mobile container setup = 3 x 40-foot sea container. (Walking Pipe system). Ideal for mobile production or limited space. Specifications: Extruder: Luigi Bandera S.p.A. Gjdpfxjzbkkho Ak Ujkb Year of manufacture: 2006 Serial number: 251371 / 251372 Downstream processing / cooling line: Supertech Industrie – Walking Pipe system Saw / cut-off unit: Graewe GmbH Type: RA 250/4 Year of manufacture: 1999 Control system: Krauss Maffei Installation: fully integrated in container (plug & play concept) Description: This robust extrusion line is suitable for the production of plastic pipes (PE/PP/PVC depending on configuration). The line consists of a powerful Bandera extruder, followed by a complete calibration, cooling and transport section (Walking Pipe), and a Graewe cut-off saw. Applications: Drainage pipes Cable protection pipes Industrial pipelines Irrigation systems 💬 Price on request 📍 Viewing possible by appointment; address = 7822 Ath, Belgium Keywords: Technical / industrial Extrusion machine Extrusion system Extrusion line Screw extruder Melt processing machine Plastic processing machine Pipe production machine Profile extrusion machine Continuous forming machine Melt and forming system

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 640 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828D, total height: 2,300 mm, total width: 1,800 mm, table width: 750 mm, table length: 360 mm, table load: 300 kg, overall weight: 4,200 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, product length (max.): 2,300 mm, number of axes: 3, This 3-axis KNUTH X-Mill 640 was manufactured in 2015. It features a travel of 640 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a Siemens 828D control unit and a 16-fold double-arm tool changer. If you are looking to get high-quality machining capabilities, consider the KNUTH X-Mill 640 vertical machining centre we have for sale. Contact us for further details. Gkodpfxozrnvus Ak Ueb - Table Height from Floor: 850 mm- T-Slots (Number / Width / Distance): 3 / 18 mm / 100 mm- Spindle Speed: 60 - 8000 rpm- Distance Spindle to Vertical Guide Way: 430 mm- Main Motor Power: 7.5 / 11 kW- Total Power: 10.00 kW- Feed Rate: 5 - 5000 mm/min- Rapid Feed Rate: 15000 mm/min- Positioning Accuracy: 0.01 mm- Repeatability: 0.005 mm- Machine Weight: 2500 kg (Manual lifting specification) / 4200 kg- Operating Voltage: 400 V / 440 V, 3-Phase, 50/60 Hz- Operating Temperature: 0°C ~ 45°C- Pneumatic Operating Pressure: >= 0.6 MPa (6 kg/cm²)- Operating Setup Time: 186,488- Tool Changer: 16-fold double-arm tool changer- Standard & Included Accessories: Siemens 828D control, electronic handwheel, spiral chip conveyor, servo drives for all 3 axes, 16-position tool changer, pneumatic tool clamping, air conditioning, fully enclosed work area, work light, Ethernet, USB interface, sloping chip tray, automatic central lubrication, spindle oil cooling, operating tools, operating instructions, X.div CNC rotary table 170 mm with manual tailstock for Siemens control, 6" manual chuck for X.div, BT40/B16 and BT40/B18 drill chuck mounts, MAS BT40-ER40-80 collet chuck, 15-piece ER40 collet set (3-26 mm), BT40 combination mandrels (Ø22, Ø27, Ø32 mm), WELDON BT40 milling chucks (Ø6, Ø8, Ø10, Ø12, Ø16, Ø20 mm) Technical Specification Taper Size BT 40

Condition: used, Year of construction: 1985, turning diameter over bed 340 mm turning diameter over slide rest 260 mm turning length 700 mm spindle bore 48 mm spindle turning speed range 25 - 2000 U/min spindle nose DIN 55027 KK 5 voltage 380 Volt total power requirement 2,2 / 4,4 kW Gksdszlkwbopfx Ak Uob weight of the machine ca. 1000 kg dimensions of the machine ca. 1.800 x 700 x 1.500 mm NARDINI MS 175E â?? Robust Lead and Feed Spindle Lathe A solid and proven conventional lathe for workshops, maintenance, mechanical engineering, and demanding machining tasks. The machine impresses with its robust construction, intuitive operation, and versatile applications. It is ideal for turning, thread cutting, face and longitudinal turning, as well as for machining a wide variety of workpieces. Advantages of the NARDINI MS 175E: â? Robust, durable machine construction â? Proven conventional technologyâ??ideal for workshops and training â? Lead and feed spindles for versatile machining capabilities â? Wide speed range â? Feed and thread tables for quick and convenient setup â? Extensive options for metric and other thread types â? Well-organized control panel with clearly arranged switches and adjustment controls â? Powerful and precise machining thanks to the machineâ??s sturdy construction â? Solid machine bed for excellent stability and low-vibration operation â? Protective cover over the spindle area for additional operator safety â? Ideal for one-off production, repairs, maintenance, and small-batch production â? A machine for users who value mechanical, reliable technology over unnecessary complexity Equipment: - 3-jaw lathe chuck - Various jaws - Lathe chuck guard - Collet chuck adapter - Various collets - Multifix tool holders - Multifix adapters - Vibration-damping feet

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,553 h, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, number of axes: 4, This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder system, allowing for efficient serial production. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill centre we have for sale. Contact us for further details. Gkodpfx Asy Epi Aek Ueb • Main features: • Main spindle + sub-spindle • Y-axis for multi-tasking operations • 12-station turret (24 indexing positions) • Live tooling (driven tools) • Tool interface: BMT45 • Workholding/Capacity (on machine): • Hydraulic 3-jaw chuck: 170 mm • Key advantages: • Y-axis + sub-spindle → full machining capability • Live tooling → turning and milling in one setup • Bar feeder → ideal for serial production • Automated part handling → increased productivity Additional equipment • Bar feeder: Top Automazioni Fusion 350 (Ø20–50 mm, up to 3200 mm length) • Additional 3-jaw chuck: 135 mm • Collet system, capacity 5–65 mm • Chip conveyor (belt type, side discharge) • Parts catcher for sub-spindle • Oil skimmer • High-pressure coolant system (5–7 bar, 20 µm filtration) • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal light • Parts handling arm (for sub-spindle unloading) • Tooling package: • 2x straight driven tool holders • 2x angular driven tool holders • 1x extended angular holder • 1x set of turning tool holders Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 2,500 t, table width: 2,500 mm, table length: 5,000 mm, total length: 8,000 mm, total width: 8,000 mm, total height: 9,000 mm, overall weight: 55,000 kg, Equipment: safety light barrier, LOIRE SAFE Hydraulic Press – High-Performance System for Toolmaking and Heavy-Duty Forming This high-performance hydraulic press in a robust 4-column gantry design has been specifically engineered for demanding applications in toolmaking (tryout/spotting) as well as for large-format forming processes. The stress-relieved, annealed welded construction ensures maximum rigidity and long-term process stability. The machine is equipped with three main cylinders featuring multi-cylinder parallel control, achieving high repeat accuracy within ±0.1 mm. Its powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approximately 450 bar, enabling precise and forceful processing. Gkedpfsyw Ah Ejx Ak Ujb Control is provided via a Siemens S7-317F PLC, combined with servo-controlled axes (Rexroth MLC) and visualization via Siemens WinCC. This setup allows for fully programmable press cycles, storage of tool parameters, and user-friendly operation with diagnostics and fault monitoring. In terms of safety, the press is comprehensively equipped: light curtains at the front and rear (Category 4), ram parallelism monitoring, emergency stop with defined response time, and optional two-hand operation ensure maximum operational safety. The system is CE-compliant and meets current safety standards. Features include a hydraulic, three-section draw cushion, a hydraulic ram cushion, as well as a movable table with approximately 4,000 mm stroke. The machine is complemented by a DIN-standard ram plate and integrated cutting impact damping for challenging forming processes. Toolmaking (Tryout / Spotting)

Condition: used, Year of construction: 2008, operating hours: 8,000 h, machine/vehicle number: ET229, SACMI OPP Roll-fed Labeling Machine – Overview This used SACMI OPP roll-fed labeling machine is configured for high-efficiency wrap-around label application on PET bottles. Built in 2008 and designed for modern beverage production, it integrates seamlessly into a used bottling line or can operate as a standalone station within industrial packaging environments. With a nominal capacity of 12,000 bottles per hour, it is well suited for medium-speed operations in water, juice, and other beverage segments that use OPP film labels. SACMI engineering is known for durability, precision, and reliability, making this second hand labeling solution a strong fit for producers seeking dependable bottling equipment. The machine supports multiple PET bottle formats, including 1.5L, 0.6L, and 0.33L sizes, providing flexibility for varied SKUs and seasonal product runs. OPP film labels, applied as roll-fed wrap-around, help reduce labeling costs and improve presentation quality with clean seams and consistent label placement. This configuration is a practical choice for beverage production facilities looking to upgrade or expand capacity while maintaining a compact footprint and streamlined integration into existing conveyors and handling systems. Technical Specifications & Performance Data Manufacturer: SACMI Year: 2008 Label type: OPP foil (roll-fed) Production speed: 12,000 bph (nominal) Bottle formats: 1.5L, 0.6L, 0.33L Container material: PET Advanced Automation & Control Systems Gsdexvpd Uspfx Ak Uokb The OPP roll-fed concept leverages hot-melt application at the leading and trailing edges of the label for secure wrap-around results. The design supports stable bottle handling, precise label feed, and consistent cutting for high-quality presentation. Controls are straightforward for operators, with clear access to key adjustments and process parameters to support quick setup and format changes. Production Line Integration Capabilities This labeling machine integrates easily into complete bottling lines and industrial packaging systems. It can operate inline with upstream filling and downstream inspection, packing, or shrink wrapping equipment. Format changeovers accommodate common PET bottle sizes such as 0.33L, 0.6L, and 1.5L, allowing multi-product flexibility across beverage portfolios within a single production line. Machine Condition & Maintenance History The unit has approximately 10,000 working hours. It is currently disconnected from the line but can be powered to demonstrate bottle transport. The machine can start and run, with label gluing disabled for demonstration purposes. Technical documentation is available, supporting commissioning, operation, and maintenance. Overall, the machine presents as a well-kept second hand asset suitable for facilities seeking reliable labeling performance at medium speeds. Operational Performance & Versatility Optimized for PET bottle labeling with OPP film, the machine delivers consistent wrap-around application across multiple formats. It is suitable for beverage production scenarios where high presentation quality and material efficiency are important. The roll-fed approach offers a cost-effective alternative to pre-cut labels while maintaining r...

Condition: used, Year of construction: 2009, machine/vehicle number: FA71, Technical Specifications & Performance DataThe SMI SK450 T is a shrink wrapping machine for PET bottles, designed for secondary packaging applications within a used bottling line. Manufactured in 2009, this second hand unit includes a heating oven for controlled shrink-film processing and bundle formation. It is configured for industrial packaging operations requiring stable, transport-ready bottle packs.Manufacturer: SMIModel: SK450 TYear of production: 2009Capacity: 45 packs/minuteContainer type: PET bottlesIncluded equipment: Heating ovenPackage configurations: 0.5L in 3x3, 0.75L in 2x3, and 1.5L in 2x3Advanced Automation & Control SystemsThis shrink wrapping machine is intended for coordinated operation in an industrial packaging environment, where bottle infeed, film handling, heat shrinking, and discharge must remain synchronized. Its operating setup supports repeatable bundle production for the stated PET bottle formats. Installation and commissioning should include verification of the existing control interface, electrical connection, conveyor synchronization, and heating-oven operating parameters.Production Line Integration CapabilitiesThe SK450 T can be positioned downstream of filling, capping, labeling, or accumulation equipment to create multipacks for distribution. In a beverage production line, shrink wrapping provides a practical secondary-packaging stage between bottle handling and palletizing. The machine is suited to PET bottle bundles in 3x3 and 2x3 arrangements, allowing the line to handle the documented 0.5L, 0.75L, and 1.5L formats.For integration into a used bottling line, upstream and downstream conveyors should be matched to the machine's infeed and discharge flow. The heating oven forms part of the packaging process and should be assessed together with film transport components, bottle guides, and pack transfer arrangements during installation planning.Machine Condition & Maintenance HistoryThe machine is in production and remains operational until 30 September 2026. It is described as being in very good condition, with regular maintenance and extensive annual overhauls carried out by the manufacturer. This maintenance history is relevant for buyers seeking second hand bottling equipment with documented attention to operational continuity and packaging performance.Operational Performance & VersatilityWith a stated output of 45 packs per minute, the SMI SK450 T supports efficient shrink-film bundling of PET bottles for industrial packaging. The documented pack patterns provide flexibility for common beverage production formats, including compact 0.5L bundles and larger 0.75L and 1.5L bottle configurations. Shrink wrapping helps produce stable multipacks suitable for handling, storage, and onward palletizing.Installation Requirements & Site PreparationSite preparation should provide sufficient space for the shrink wrapper, heating oven, safe material flow, and access for operation and maintenance. The installation layout should account for bottle conveyors, film supply, bundle discharge, and connection to downstream packaging machinery. Electrical services and any required line utilities should be checked... Gedpfx Aoztwl Iek Uskb

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. • Core processing machines: • HOMAG Optimat KFL 525 • Units: pre-milling, gluing, trimming, radius units, scrapers, polishing • HOMAG control with touchscreen/keyboard • Sensors for board thickness and edge material detection • Large blue safety windows • HOMAG Optimat KFL 526 • Continuing trimming and polishing stations • Manual service access with lift-up covers • Controls & electrics: • HOMAG electrical cabinet with main switch • PLC, fuses, control boards, voltage/current meters • Safety control panels (stop, reset, feed, emergency stop) • Condition: • Complete, physically connected line • Normal operational wear; no major damage visible • Full set of professional edge-banding aggregates installed Gjdpfx Aszuhbiok Uokb Additional equipment • 2× Automatic loading systems: WEEKE OPTIMAT BST 500 D (2007) • Ser. no. 0–251–04–2756 (34 kW, 80 A) and 0–251–04–2755 (25 kW, 63 A) • Overhead gantry with vacuum lifting cups, automatic material alignment • Heavy-duty roller conveyor section • Transport/transfer system: HOMAG OPTIMAT TDL 310/25/12 (2007) • Ser. no. 0–205–10–1698 • Wide roller conveyor with safety guards • Cross-transfer and sorting sections • Integrated measuring and positioning units • Portal manipulator (stacker/unloader) • Overhead vacuum pick-and-place unit (orange) • Linear guiding with chain drive, dedicated motor drive • Automatic lifting and stacking of finished panels • Extraction/filtration • Strong industrial dust extraction along full line (yellow flexible hoses + metallic ducts) • Safety guarding • Complete set of safety guards across the line

Condition: ready for operation (used), Year of construction: 1980, machine/vehicle number: 134B, functionality: fully functional, operating hours: 15 h, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding height: 270 mm, height adjustment type: mechanical, total height: 1,900 mm, total length: 3,450 mm, total width: 1,513 mm, overall weight: 4,900 kg, travel distance X-axis: 1,120 mm, travel distance Z-axis: 190 mm, grinding length: 850 mm, workpiece weight (max.): 80 kg, disc diameter: 125 mm, distance stand to spindle center: 362 mm, distance table to spindle center: 180 mm, feed length X-axis: 1,120 mm, feed length Z-axis: 190 mm, feed rate X-axis: 15 m/min, grinding spindle speed: 7,400 rpm, grinding wheel diameter: 125 mm, grinding wheel width: 16 mm, grinding width: 320 mm, pivoting range: 369 °, rotational speed (max.): 7,400 rpm, rotational speed (min.): 2,880 rpm, spindle speed (max.): 7,400 rpm, spindle speed (min.): 2,880 rpm, table length: 1,000 mm, table width: 250 mm, tank capacity: 127 l, working range: 850 mm, Spline Grinding Machine MSZ 3451Б (Profile grinding machine for splined shafts) The MSZ 3451Б is a specialized spline grinding machine designed for precision grinding of external splines and profiled shafts. Manufactured by МСЗ (Moscow Machine Tool Plant), this machine is intended for industrial applications requiring accurate profile grinding and reliable repeatability. The machine is suitable for workpieces with a maximum length of 1000 mm, while the maximum grinding length is 850 mm. It supports workpieces with a maximum diameter of 320 mm and a maximum weight of 80 kg, making it ideal for medium-sized splined shafts. The machine allows grinding of parts with 3 to 48 splines, covering a wide range of spline configurations. The grinding spindle is designed for grinding wheels with diameters from 25 to 125 mm and a maximum wheel width of 16 mm. The spindle operates at stepped speeds of 2880 / 4550 / 6300 / 7400 rpm, driven by a total installed power of 4 kW. The permissible grinding wheel speed corresponds to the selected spindle speed and wheel diameter, ensuring safe operation. The machine features a rigid worktable with a length of 1000 mm and a width of 250 mm, with a travel distance along the X-axis from 200 to 1120 mm and a Z-axis travel of 190 mm. Height adjustment is performed via a mechanical system, providing precise and stable positioning during grinding operations. With overall dimensions of approximately 1513 × 3450 × 1900 mm and a machine weight of about 4900 kg, the MSZ 3451Б offers excellent stability and vibration damping. The machine operates on three-phase power (3 × 400 V, 50 Hz) and is supplied with factory documentation, facilitating operation, setup, and maintenance. Key Features: *Specialized spline grinding machine *Maximum workpiece length: 1000 mm *Grinding length up to 850 mm *Maximum workpiece diameter: 320 mm *Workpiece weight up to 80 kg *Number of splines: 3–48 *Grinding wheel diameter: 25–125 mm *Grinding wheel width: max. 16 mm *Spindle speeds: 2880 / 4550 / 6300 / 7400 rpm *Total installed power: 4 kW *Mechanical height adjustment *Rigid industrial construction (~4900 kg) Typical Applications: *Grinding of external splines *Profile grinding of splined shafts Gsdpfx Ajx S Hc Nok Uokb *Precision machining in machine-building industries *Repair and refurbishment of transmission components *Small- and medium-series production of splined parts

Condition: ready for operation (used), Tool Milling Machine / DECKEL FP 2 with 3-Axis Digital Readout - Heidenhain ND 780 - Machine in well-maintained original condition - Travel X/Y/Z 450x230x400mm - 3-axis digital readout Heidenhain - Automatic feeds / rapid traverses on all three axes - Spindle speed range 40-2000 rpm - Universal tilting, swiveling, and rotating table - Horizontal / vertical milling setup with sliding head Gedsy R Emqjpfx Ak Uokb - Tool holder ISO 40 - Coolant system - Various tool holders & collets - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Errors / input mistakes reserved

Condition: used, Year of construction: 2011, Working width: 20–230 mm Working height: 8–120 mm Feed system • Variable-frequency controlled feed drive: 5–30 m/min, continuously adjustable, with 7 kW (9.5 HP) brake motor. • Pneumatically controlled up/down infeed roller before the 1st bottom spindle. • Axial adjustment range of the feed rollers relative to the left spindle: 35 mm. • Extended pendulum axis opposite the left spindles to 150 mm. • Reduced roller spacing in the area of the right-hand spindles. Machine frame, tables and fences • 2 m long jointing table (including jointing fence). • Grooved guide for short or difficult-to-feed workpieces, coated with Marathon PowerCoating. Table tops are non-removable. o Minimum working width: 25 mm o Maximum stock removal at the 1st bottom spindle: 7 mm • Manual lubrication pump. • One driven, hardened outfeed table roller, 210 mm wide. • One driven, hardened machine table roller, 210 mm wide. Pressure elements and guides • Spring-loaded top pressure rollers. • Anti-kickback device before the top spindle for short workpieces. Machine operation • Memory function for storing profile setup data. • EasyCom for quick and easy setup of the moulder and planer. • Storage for up to 1,000 profile programs, including tool data. • Reduced setup times. • Convenient and safe operation. • Basic equipment prepared for CNC-controlled adjustment and positioning. • 2 CNC-controlled radial adjustment and positioning axes for tool spindles No. 4 and No. 5, in conjunction with the Memory function or EasyCom. • CNC-controlled feed height adjustment (up/down) in conjunction with the Memory function. • Mobil- tool spindle (1 axis): automatic adjustment of the left spindle to different workpiece widths. • Centralized lubrication points located at the front of the machine. • Electromagnetic locking of the safety hood. • One internal light inside the safety hood. Specifications are provided for information only. Gedpfx Aozkklpsk Ujkb This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece weight (max.): 40 kg, input voltage: 220 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,055 mm, total height: 967 mm, total length: 834 mm, overall weight: 102 kg, sheet thickness aluminum (max.): 254 mm, scan area length: 610 mm, scan area width: 610 mm, table length: 610 mm, table width: 610 mm, laser wavelength: 700 nm, extraction nozzle diameter: 100 mm, Equipment: cabin, 2022 Epilog Fusion Edge 24 – 60W CO₂ Laser Cutter & Engraver 2022 Epilog Fusion Edge 24 CO₂ laser engraving and cutting machine with 60W laser, IRIS™ camera positioning, BOFA AD Oracle extraction, air assist pump and Photo Laser Plus software. Very lightly used, professional-grade laser cutter for wood, acrylic, leather, plastics and more. Description Professional Laser Engraving & Cutting System – Very Lightly Used The Fusion Edge 24 is one of Epilog’s most advanced compact laser systems, combining industrial motion control, high-speed engraving technology, and intuitive operation. It is ideal for sign makers, workshops, educational facilities, makerspaces, and manufacturing businesses requiring precise engraving and cutting capabilities. Machine Overview Manufacturer: Epilog Laser Model: Fusion Edge 24 Year: 2022 Laser Type: CO₂ Laser Power: 60 Watt Power Supply: 220V Condition: Excellent – Very Lightly Used Included Equipment The sale includes a complete turnkey laser engraving system: Epilog Fusion Edge 24 – 60 Watt CO₂ Laser Engraver/Cutter BOFA AD Oracle Industrial Fume Extraction Unit Air Assist Pump / Compressor Photo Laser Plus Software Hose kit for extraction system All original components supplied from new Key Features *High-Speed Laser Engraving The Fusion Edge series delivers engraving speeds up to 120 IPS (3.05 m/s) with 5G acceleration, enabling rapid production without sacrificing precision. *IRIS™ Camera Positioning System Integrated dual overhead cameras provide a live view of the work area, allowing accurate placement of artwork directly on materials and reducing setup time. *Touchscreen Control Interface The system includes a 7-inch touchscreen display for easy job selection, autofocus control, and job trace positioning directly at the machine. Gkjdeyug Rqspfx Ak Ueb *Industrial Motion Control Brushless DC servo motors Ground and polished stainless steel linear motion system Teflon-coated bearings for smooth operation *Network Connectivity The Fusion Edge supports Ethernet, USB, and wireless networking, enabling easy integration into production workflows. *Radiance™ Beam Optics Advanced beam control technology delivers high resolution engraving across the entire work table. Technical Specifications Maximum Engraving Speed: 120 IPS (3.05 m/s) Acceleration: 5G Work Area: 24" × 24" (610 × 610 mm) Maximum Material Thickness: 10" (254 mm) Laser Tube: Air-cooled metal/ceramic CO₂ tube Resolution: 75 – 1200 DPI engraving quality Memory: Up to 1GB file processing Motion System: Brushless DC servo motors BOFA AD Oracle Extraction System The included BOFA AD Oracle industrial fume extraction unit ensures a clean and safe working environment. Key Specifications Airflow: approx. 380–400 m³/hr HEPA H13 filtration with 99.997% efficiency at 0.3 microns Multi-stage filtration with activated carbon Noise level:

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports Gsdpfx Akozlbp Uj Ujkb - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: used, Year of construction: 2022, machine/vehicle number: LC653, Used Micro can CL10 filling line 4000 Cans per hourTechnical Specifications & Performance DataThis complete automatic canning line is a compact, engineered for efficient beverage production in aluminum cans. Manufactured by Micro Can, it integrates key bottling equipment into a cohesive, space-efficient unit suitable for industrial packaging environments. As a second hand, used bottling line, it offers proven reliability and excellent value for expanding or optimizing production.Line type: Complete automatic canning lineManufacturer: Micro CanMain module: Micro Can CL10 filler/seamerRated output: 4,000 cans per hourContainers: Aluminum cansFormats: Standard 0.33ml and 0.44mlFilling type: gravityAdvanced Automation & Control SystemsThe line is designed for streamlined operation with integrated control and coordinated infeed/outfeed logic between the depalletizer, filler/seamer, and labeling machine. Quick setup and simple recipe changes support efficient format adjustments. Operator-friendly controls, interlocked guards, and emergency stops provide safe, intuitive handling during routine operation and maintenance. The configuration minimizes interface risks and ensures stable synchronization across the complete packaging process.Production Line Integration CapabilitiesOptimized for inline operation, this second hand canning line connects upstream depalletizing to downstream labeling with harmonized conveyor handling. It is suitable for beverage production expansions, pilot facilities, or as a dedicated canning cell within a larger packaging plant. Designed for aluminum cans, it can be interfaced with upstream processing and downstream secondary packaging equipment as needed.Machine TypeManufacturer/ModelYearDepalletizerFilling MonoblockMicro Can CL10Labeling MachineWrap-around labellerMachine Condition & Maintenance HistoryThe line is offered as a complete, ready-to-operate unit. As a used bottling line, it has been configured for immediate deployment in industrial packaging environments, subject to standard site preparation and utilities. Overall condition is consistent with a professionally integrated second hand canning line built for dependable daily operation.Operational Performance & VersatilityWith a rated output of 4,000 cans per hour, the Micro Can CL10 filler/seamer delivers stable filling and precise seaming performance. The wrap-around labeling machine supports continuous production with consistent label application, and the depal... Gjdpfx Akozkhtqs Uekb

Year of construction: 2016, condition: used, Year: 2016 Condition: good Counter: approx. 3,340,000 Configuration: - Creasing tool - Perforating tool, 11 TPI - 2 × perforating heads, 11 TPI Technical Specifications: - Feeder: suction belts - Feeder pile height: 180 mm - Minimum sheet size: 105 × 148 mm - Maximum sheet size: 375 × 660 mm; 375 × 1,050 mm with table extension - Paper weight – perforating: 80–300 gsm or max. 0.3 mm - Paper weight – creasing: 80–400 gsm or max. 0.4 mm - Maximum speed: 5,000 A4 sheets/hour Perforating - Maximum number of operations: 20 per sheet - Minimum spacing: 3 mm - Number of tools: 1 perforating tool Creasing - Maximum number of operations: 20 per sheet Godpfszuzd Rox Ak Uskb - Minimum spacing: 1 mm Multigraf Touchline CP 375 MONO is designed for perforating and creasing sheets with paper weights of up to 400 gsm. The machine is equipped with perforating tools for crosswise and longitudinal perforation in a single pass. Thanks to its interchangeable tools, the new Touchline CP 375 MONO can be quickly converted from a creasing machine to a perforating machine or vice versa at any time. The cross-perforating bar can be replaced with a creasing bar, allowing cross creasing, longitudinal perforation and partial longitudinal perforation in a single pass through the machine. Machine setup, including perforation, is fully automatic via the touchscreen. Sheet feeding is automatic and uses suction belts, and the machine can be equipped with double-sheet detection.

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 1 kg, Equipment: documentation/manual, type plate available, For sale is a ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research, especially when measuring components in challenging environments. Fast application, easy operation. Condition: Lightly used, primarily for trade shows, exhibitions, and training purposes. Scope of delivery: · T-Scan Hawk 2 Lite · Blue Class 2 laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS calibrated) · Sensor cable · Transport case · Incoming inspection at our facility with sphere bars according to ISO 10360 · Acceptance certificate with proof of traceability · ZEISS INSPECT OPTICAL 3D Free · Sensor driver T-SCAN Hawk 2 ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing and processing of polygon meshes · Element construction: regular geometries, points, sections, curves, surfaces, dimensions · CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods Gjdpfxezyp Ste Ak Uskb · Comparison against CAD with colored deviation display · Dimensioning and form/position evaluations according to ISO GPS and ASME Y14.5 · Report module Sensor driver T-SCAN Hawk 2 · Setup and calibration · User-guided calibration · Measurement data acquisition and project management · Configurable workflow assistant

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg Gjdpfx Aksvt Dwbs Uokb - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.