Cable Granulator,Cable Granulating Machine

GRS Feinwerkmechanik GRS KG 80

Condition: used, Eldan Granulator HG129 Hnedpfxjt Uyvrs Agmon

Year of construction: 2024, condition: new, Bending capacity: 6 mm Bending: 5 mm Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg Hjdpfjftdh Iox Agmonn The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Operational, working. Available for any test. Hnedpjtxni Nsfx Agmsn Number of die: 1 Number of pieces per min.: 300 Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Hnedpfx Aotvau Ajgmen Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: new, functionality: fully functional, power: 125 kW (169.95 HP), color: other, Year of construction: 2026, Equipment: cabin, CONSTMACH Stationary-60 concrete plant is an excellent solution for medium-scale and long-term ready-mix concrete projects. Equipped with a fully automatic control system, this plant offers high efficiency and continuous production capacity. Its flexibility to produce all types of concrete allows it to easily adapt to different project requirements. With its durable steel construction, CE-compliant production, and low maintenance needs, it is a plant model trusted by professionals. Stationary-60 can be configured with pan, single-shaft, twin-shaft, or planetary mixer options depending on project conditions. It can work with cement silos with capacities ranging from 50 to 500 tons, and cement filling is easily done thanks to the integrated blast bunker. Furthermore, this model can be equipped according to climatic conditions, ensuring efficient concrete production with heating systems in cold regions and cooling units in hot climates. Aggregate pre-feeding systems eliminate the need for ramps, offering flexibility in field use. In limited spaces, bucket transport systems facilitate installation. FIXED 60 Fixed Concrete Batching Plant Technical Specifications Production Capacity: 60 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan - Single Shaft - Twin Shaft - Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters - 5.5 kW Cement Silo: Options ranging from 50 to 500 tons Control Type: Fully Automatic Why Choose the Stationary 60 Concrete Plant? Hedpfx Aexqgzyjgmsnn CONSTMACH FIXED 60 is a concrete plant that stands out in the industry in terms of both performance and durability. It ensures uninterrupted production with its long-lasting components, high-quality production standards, and superior automation system. Its adaptability to different climatic conditions, energy efficiency, and modular structure provide a more than satisfactory return on your investment. CONSTMACH's strong technical service support, extensive spare parts network, and international production experience make the Stationary-60 not just a plant, but a long-term business partner. If you are looking for a reliable, high-capacity, and economical concrete plant, the CONSTMACH Stationary-60 is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Welding rotary table Focker Strähler 8 tons 8000 Kg load capacity Hnedpjf Ezdnofx Agmsn with hand and foot remote control Speed and inclination infinitely variable 0,02 U/min to 1,1 U/min diameter 1500mm height tilted to the middle 1170mm height horizontal 1400mm length 2400mm width 1500mm condition optically and technically perfect, runs very quietly

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Hsdodtdwaepfx Agmjnn Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below

Year of construction: 2022, condition: new, Wire stripping machine G.R.S. 5 This is the second model by G.R.S., what stands on its own feet. Compared to the G.R.S. 4 this model weighs about double, has 30% more power and requires 380V for operation. Hsdpfx Agjhpcprjmjnn Technical Data: GRS 5 10mm - 90mm Dimensions: W / H / D 78 cm / 120 cm / 84 cm Weight: app. 220 Kg Cutting speed: 30 Meters p. Minute Engine: 380V / 3000W Stripping of cables with a cross section of 10 - 90 mm and an insulation thickness up to 20 mm.

Condition: new, 3-roll round bending machine Ostas ORM 1270 x 140 Technical specifications: Special equipment included in the price: Hnjdpfx Agefpmz Hsmjn motorized lower roll adjustment hardened rolls motorized rear roller adjustment digital display sheet width 1270 mm sheet thickness 5,0 mm max. sheet thickness 4,0 mm bending roll length 1270 mm roll diameter 140 mm weight 1400 kg dimension L-W-H 2500 x 800 x 1100 mm Motor: 2.2 KW Equipment: upper and lower roller electrically driven upper roller can be swung out conical bending device asymmetric roller arrangement self-braking main motor sep. control and operating panel safety line CE-sign

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Hjdpfxet Iwt Ue Agmsnn reactions or questions ? please with full name, company name and phone number.