Used Scrap Shear for sale (1,849)

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front Njdpfeyuzcusx Ahvjwd - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm Nwsdjydqn Sepfx Ahved hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: used, Year of construction: 1987, cutting dimensions max. 600 x 1000 mm plate thickness max. 3 mm cutting angle 1,5 ° side stop electrical adjustable 0 - 1010 mm rear stop electrical adjustable 0 - 610 mm no. of strokes 60 Hub/min total power requirement 14 kW weight of the machine ca. 8,7 t dimensions of machine L x W x H 2,5 x 2,18 x 2,3 m Accessories: sheet metal stacking device on rails Nwsdpfotqql Iex Ahved

Condition: used, Year of construction: 2021, machine/vehicle number: 168600, Reference No. 26029 Technical Data: - Max. cutting width: 2080 mm - Max. cutting capacity at 45 Kp/mm²: 6 mm Nwodpfx Ahoywhuwjvjd - Throat depth: 150 mm - Automatic cutting angle adjustment: 0.3 – 2° - Automatic cutting gap adjustment - Number of hold-downs: 10 pcs - Strokes per minute: up to 22 1/min - Front angle gauge approx.: - 2 front support arms approx.: - Motorized backgauge with positioning control up to 1000 mm - Rear area safety device with light barrier - Cutting line illumination - Working height: 860 mm - Electric foot switch - Drive: 400 V / 11 kW - Space requirement approx.: W 3150 x H 2150 x D 2300 mm - Weight approx.: 4.8 t

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Njdpfxexgbwze Ahvjwd Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 1,143 kg, type of input current: three-phase, operating pressure: 3,500 bar, For sale: fully operational alligator shear/hydraulic metal shear/scrap shear suitable for cutting cables. Manufacturer: JMC Recycling Systems Ltd Model: 500 SHEAR Serial number: 121 Year of manufacture: 2008 Rated voltage: 380–415 V Frequency: 50 Hz Maximum operating pressure: 3500 Total weight: 1,143 kg Recommended hydraulic oil: HYD ISO 46 The oil has recently been replaced. The machine is in perfect working order! Nwodpfx Ahjywfqcoved If you have any questions or require further information, feel free to send us a message or call us.

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Nwedpfx Ahst Ac D Uoved Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: excellent (used), Year of construction: 2007, Technical specifications: Njdpfxeywd Nds Ahvjwd Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Max. cutting capacity for aluminium: 8.0 mm Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 1997, Geka ETS 300 Year of manufacture: 1997 Capacity: 3000x1.5mm for St37 Left-hand sheet stop Manual rear gauge up to 700mm Nodpfoywdzmox Ahvewd 380 Volt Foot switch Dimensions approx. (in mm): 3650x2000x1400 Weight approx. 2200kg

Condition: good (used), Year of construction: 2008, sheet thickness (max.): 13 mm, cutting length (max.): 4,160 mm, DENER Hydraulic Shear 4100x13mm DMMH.4113 Brand: Dener Model: DMMH NC 4113 Year: 2008 Standard Control: Dener HT 071 Cutting Length: 4,160 mm Maximum Cutting Thickness: 13 mm Cutting Inclination: 2º Number of Hold-Downs: 19 Motor Power: 30 kW Cuts/min.: 8 Manual Lubricator Nedpfowi Snxex Ahvowd *Shear under inspection. Blades have been removed for grinding. Hold-downs have been removed for replacing seals and gaskets. Delivered fully inspected and with a 6-month warranty.

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, back gauge: 500 mm, Hydraulic Shear Brand: Casanova Njdpfx Ahewy Nhqsvewd Model: VC-26 Year: 1995 Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Condition: used, functionality: fully functional, sheet thickness (max.): 6 mm, HACO 3000x6mm hydraulic guillotine shear TS-3006 Nedpowx Ix Sefx Ahvjwd Brand: HACO Model: TS-3006 Power: Three-phase 380V Cutting length: 3,050 mm Cutting thickness: 6 mm Type: Vertical cut, motorized blade angle adjustment (0.5 to 3º) Back gauge: 750 mm (motorized with manual handwheel for fine adjustment) Manual blade gap adjustment via lever at the rear Weight: 4,500 kg Motor: 7.5 kW

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Cutting length: 3050 mm Nwodpfxexgdlne Ahvod Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: used, Year of construction: 2008, Cutting bench, cutting shear Nwsdpfx Ahjwng Rxsved Type: Hydraulic Manufacturer: Colmal Type: HS 40-13 Year: 2008 Controller: Delem DAC-350 Cutting width: 4050 mm Max. thickness: 13mm Incl. documentation and peripherals Incl. outfeed-conveyor Machine dimensions: 4800x2400x2650mm Machine weight: 15000kg - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1987, Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear Nwedpfxoyupxwj Ahved -Manufacturer: Peddinghaus, hydraulic profile steel shear type Peddiworker 400 -Drive: hydraulic -Pressure force: 40 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, pipe notching -Dimensions: 870/660/H1630 mm -Weight: 860 kg

Condition: used, Year of construction: 1986, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Darley Type: GS 3100x13 Year: 1986 Control: Conventional Cutting width: 3100mm Cutting thickness: 13mm Electric Backgauge Motor-power: 22kW Incl. frontloader-arm Nwodpfswnh Ncjx Ahvsd Total dimensions: 3750x1900x2150mm Machine-weight: 10000kg - Year: 1986 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2021, total length: 3,850 mm, total width: 2,350 mm, total height: 1,560 mm, Weight: 5.500 kg - Year: 2021 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 27869 - Drive system: CNC Nwodpfx Ajx R R Tcehvsd - Control system brand: Cybelec - Control system type: Cybtouch-8W - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 12.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 20 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Ball-bearing table - Transport dimensions: 3850mm x 2350mm x 1560mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2008, working width: 3,080 mm, sheet thickness (max.): 13 mm, Equipment: emergency stop, finger protection, foot remote control, For sale: Durma VS 3013 hydraulic guillotine shear, lightly used, single owner, manufactured/purchased in 2008 (supplied by Vendo Kft.). The machine is in very good technical condition and has been regularly maintained. Key Specifications: Cutting length: 3080 mm Maximum sheet thickness: 13 mm (steel), approx. 10 mm (stainless steel) Drive system: Hydraulic Back gauge: Motorized Hold-down system: Hydraulic clamps Frame: Heavy-duty welded steel construction Machine weight: 12,900 kg Condition: Very good Nwjdpfx Ahsx Tarajvjd Location: Tatabánya, Hungary Price: EUR 21,500 net The machine can be inspected and tested at our facility in Tatabánya, Hungary.

Condition: used, sheet width 2500 mm Nsdpfx Asyv I H Dehvswd plate thickness 3,0 mm distance between columns 2550 mm back stop - adjustable max. 510 mm weight of the machine ca. 1,8 t dimensions 3,3 x 1,4 x 1,8 m

Condition: good (used), functionality: fully functional, Hydraulic Guillotine Shear SAGITA Working width: 2500 mm Shearing capacity: 5 mm Electric back gauge Nsdpfx Aheyv Ikcovewd Foot pedal, machine feet Condition: Good, blades OK, cuts cleanly. Can be inspected under power. Loaded free of charge from D -88433 Schemmerhofen.

Condition: excellent (used), functionality: fully functional, sheet thickness steel (max.): 8 mm, back gauge adjustment: motor-driven, IMAL SHEAR 3000 X 6/8 HYDRAULIC MODEL CC0.30/6 MAX THICKNESS R 42: 8 mm MOTORISED BACKGAUGE USED FUNCTIONAL MACHINE INTERNAL CODE: SVR 396 Njdpfxsyv Hdno Ahvewd

Condition: not inspected (used), Hydraulic guillotine shear Cutting length: 3150 mm Nwodpfx Aheyv Dmyovsd for steel ST 37 up to 8 mm thickness

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t Nsdpfx Aot D Nz Aohvewd hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: good (used), Year of construction: 2008, Cutting length: 3060 mm Nsdsyvt Tcopfx Ahvewd max. cutting capacity: 8 mm up to 14 strokes per minute manual blade gap adjustment backgauge: 750 mm support arms with scale motor power: 15 kW

Condition: new, Year of construction: 2025, Alligator shear JMC 500 HD brand new AVAILABLE NOW, ex work IUT Beyeler AG, DE-06188 Landsberg Nwsdshq Nk Rjpfx Ahvod