Used Scm S 520 for sale (660)

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: AB00035080, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,112 kg, Equipment: CE marking, documentation/manual, saw blade guard, SCM Class SI 400ep panel saw with blade guard, CE version, manufactured in 2025. Equipped with a miter fence with 3 LCD screens for positioning the stops, automatic adjustment with 2 axes for the scoring unit, a chassis for miter operations with the CompeX system, and an extended support table for panels with a roller conveyor on the side of the parallel fence. Godsz Ngglepfx Akyjkc

Condition: used, Year of construction: 2005, Working width: 180 mm Working height: 110 mm Number of working spindles: 4 Spindle arrangement: bottom, right, left, top Motor power (bottom & top spindle): 7.5 kW Motor power (right & left spindle): 7.5 kW Adjustment (bottom spindle): - Adjustment (right spindle): - Adjustment (left spindle): handwheel Adjustment (top spindle): handwheel Planer heads (bottom & top): Centrolock Planer heads (left & right): Centrolock combined with profiling capability Feed speed: 2 Gkjdpfxsyq R Aij Akyec Feed roller pressure: spring Current consumption: 32.8 A Extraction connection: Machine length: Machine width: Weight:

Condition: used, Year of construction: 2017, power: 20 kW (27.19 HP), edge thickness (max.): 12 mm, feed rate X-axis: 20 m/min, The machine has the following configuration: Pre-milling unit End-capping unit Number of motors in end-capping unit: 2 Rough milling unit, top and bottom Number of motors in rough milling unit: 2 Edge rounding unit Number of motors in edge rounding unit: 2 Edge trimming unit Glue application unit Edge finishing unit Number of motors in edge finishing unit: 2 TECHNICAL DETAILS Workpiece processing Min. board thickness: 8 mm Max. board thickness: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 12 mm Max. feed rate: 20 m/min MACHINE DETAILS Total connected load: 20 kW EQUIPMENT Preheating lamps for workpiece sides Edge roller magazine Glue reservoir for EVA hot melt adhesive Spray unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Gedpfxjzmtldo Akyokc External reference: 7981

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Gkjdpfx Aksz Nyp Heyoc Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: used, machine/vehicle number: 007186, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Gkjdpfx Ajz N Swpokyec Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 10 nr

Condition: excellent (used), SCM Sandya 1K A combined unit with a steel roller and sanding shoe. Main motor: 11 kW. Gjdpfx Aez I Iikskyokc Machine in very good condition.

Condition: used, Year of construction: 2013, total width: 1,650 mm, total height: 1,750 mm, Colour: White Empty weight: 2.600 kg Dimensions (LxBxH): 415 x 165 x 175 cm Price: On request - Year: 2013 - Documentation available: Yes - └ Type Documentation: Operating system, Technical data, User manual - CE marking present: Yes - CE certificate present: No - Serial number: AB - 216795 - Number of spindles [pcs.]: 5 Gsdpfszwuh Isx Akyskc - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 9 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 140 - Min. planing width [mm]: 25 - Max. planing width [mm]: 230 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 120 - Options: Powered rollers in table - Feed speed: Automatic - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 25 - └ Feed speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 57 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 4150mm x 1650mm x 1750mm (l x w x h) - Transport weight [kg]: 2600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SCM nova fs410 thicknesser planer Planing width: 410mm, 4 knives, 2 feed speeds, Thicknesser table mounted on 4 screws, Manual adjustment of the thicknesser table, Max. planing thickness: 240mm, Gksdpjz Epcgsfx Akyec Length of the planer tables: 220cm, Electric brake, Adjustable planer fence, 7KW motor, Machine inspected, very good condition, Weight: approximately 550kg.

Condition: excellent (used), functionality: fully functional, Motor power 11 kW First calibration unit with steel roller Second unit with rubber roller Belt cleaning blow-off Working width 1100 mm Two feed speeds for sanding belts Stepless adjustable conveyor feed Electric table height adjustment Shoe with adjustable activation time Brush at workpiece outlet Gkedpfx Aozz Nmyskyec Pneumatic oscillation

Condition: excellent (used), Catalog number 8116 TECHNICAL DATA - Shaft width: 500mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230mm * From top to bottom: - Ratchets - Toothed infeed roller, pulling, helical - Pressure roller - Planing roller - Pressure roller - Smooth outfeed roller, pulling - Motor: approx. 4kW - Manual table lifting - 2 feed speeds: 8/12.5 m/min - Diameter of dust extraction outlet: 130mm - Dimensions (L/W/H): 970x870x1300mm Gksdpoz Nhriefx Akysc - Weight: 620kg ADVANTAGES – Made in Italy – Used thickness planer, very good condition Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Gkedpjwwl Nljfx Akyjc Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, machine/vehicle number: 008722, X axis working area: 3050 mm Y axis working area: 900 mm Main Electrospindle power: 5.6 KW Gsdpfx Ajztkb Aokyekc Number of controlled axes: 3 axes Total number of drilling spindles: 14

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls pneumatic pressure of feeding rolls grooved table Gksdpfx Ajz Hcipekyjc

Condition: excellent (used), Year of construction: 2010, -max.width-240mm Gkedpfx Aez Rnlfskyec -work heads 4+1

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. Gedpoyftzkofx Akyekc • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: excellent (used), Table length: 320 cm Cutting height: 9 cm Motor power: 7.5 kW Gsdpfx Aozykwkekyjkc

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 2,000 kg, SCM Sandya 7S wide belt sanding machine Working width: 1100 mm Sanding height: 4–160 mm 1 metal sanding head, 11 kW 2 combi sanding heads, 11 kW Gkedpfx Akezykr Ujysc Adjustable speed of the combi sanding head via frequency inverter Electric height adjustment Optical oscillation Adjustable feed speed via variator: 3–17 m/min Vacuum pump Technical documentation and CE certificate Year of manufacture: 2004

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: AB00042037, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, working height: 170 mm, height adjustment type: electric, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Automatic wide-belt sander DMC SD30, RCS 110 model. Technical specifications: - Working width 1100 mm, working thickness 4 to 170 mm Gsdpfxjz Rmxdo Akyskc - Sanding belt 1115 x 1900 mm - Conveyor belt with 2 speeds (4.5 / 9 m/min) - Electronic positioning of the work table - Automatic centering and tensioning of the conveyor belt.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Gkodjvvi N Ispfx Akyjc

Condition: ready for operation (used), working width: 240 mm working height: 150 mm spindles: 5 spindles set: bottom/right/left/top/bottom spindles speed: 6000 RPM spindles diameter: 40 mm minimal diameter of tool: 100 mm Gjdpfx Ajzxyctokyskc max diameter of tool: 200 mm motors: 3x 5,5kW; 2x 4kW; 2,2kW pneumatic pressure of feeding rolls year: 2010

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015315, functionality: fully functional, planing width: 240 mm, number of spindles: 8, working height: 140 mm, TECHNICAL DETAILS Max. planing width: 240 mm Max. planing height: 140 mm Infeed table length: 2,500 mm Feed drive: Cardan drive Lubrication system: Automatic Diameter of planing shaft: 40 mm Spindles Number of spindles: 8 pcs. Spindle 1 Spindle type: Bottom Tool available: Yes Spindle 2 Spindle type: Right Tool available: Yes Spindle 3 Spindle type: Left Motor power: 15 kW Tool available: Yes Spindle 4 Spindle type: Right Motor power: 11 kW Tool available: Yes Spindle 5 Spindle type: Left Motor power: 11 kW Tool available: Yes Spindle 6 Spindle type: Top Motor power: 15 kW Tool available: Yes Spindle 7 Spindle type: Top Motor power: 11 kW Tool available: Yes Spindle 8 Spindle type: Bottom Motor power: 11 kW Tool available: Yes Feed system Manufacturer: H&M Max. infeed length: 250 mm Discharge system Manufacturer: H&M Max. discharge length: 760 mm Gedpfezxcfdox Akyokc MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 20,000 x 2,400 x 2,200 mm Unladen weight: 6,000 kg Number of transport packages: 8 pcs. EQUIPMENT Tools for all 8 spindles Automatic lubrication system Electrical wiring diagrams Technical data Documentation CE marking

Condition: ready for operation (used), Year of construction: 2013, This 5-axis SCM Stefani MD HP edgebander was manufactured in 2013. It features a robust steel construction, high-frequency motors, and a "Startouch" control system with a 12" touchscreen. Capable of handling solid wood edges up to 15 mm and rolls up to 3 mm, it includes a pre-milling unit, interchangeable glue pot, and a feed speed of 25 m/min. Consider the opportunity to buy this SCM Stefani MD HP edgebander. Contact us for more information. • Machine maintained and serviced • Edge banding machine for single-sided edge application • Heavy-gauge steel construction • High-frequency motors • Protective hood over all units after the gluing station • Spacer on the rotary control panel • Panel feeding via chain feed • “Startouch” control system with 12" color touchscreen • Solution MD-HP "T-ER4S" version • Capabilities: solid wood edges up to 15 mm; edge rolls up to 3 mm • Feed speed: 25 m/min • Pre-milling unit RT-E (entry spindle with diamond cutters) • Gluing unit VC-S4 / QMS with interchangeable Teflon-coated glue pot • iGlue device • EVA pre-fusion • Motor-driven feed rollers, interchangeable (needle roller for solid wood, plastic rollers) • 3 pressure rollers, one motor-driven • Two-motor pressure units: straight and inclined • Anti-adhesive agent spray unit AAR for edge finishing • Scraper and edge scraper unit • Cloth polishing unit Additional equipment Gsdezug Sgspfx Akyskc • Anti-adhesive and polishing liquids

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed rate X-axis: 40 m/min, working width: 240 mm, planing height: 120 mm, spindle diameter: 40 mm, overall weight: 4,000 kg, power of feed motor: 4,000 W, We offer this very well-maintained SCM superset nt moulder and planer, year of manufacture 2022. Manufacturer: SCM Model: superset nt Year of manufacture: 2022 Condition: very good Category ID: 858 Type ID: 2293 Gkedpfxsyapi Ho Akysc Type: Moulder and Planer If you have any questions or need further information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: AB00041292, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 950 kg, Equipment: CE marking, documentation/manual, saw blade guard, Circular saw with a tilting saw blade, compliant with European safety standards and equipped with a motor braking system. Features: Independently driven scoring unit Ready 3 UP Plus version (3 axes), suitable for CE and USA/Canada Gkjdpfx Aez Rmu Eekyoc Sliding carriage of 3200 mm Miter gauge with digital display of the position of the 2 stops

Condition: used, Year of construction: 2008, functionality: fully functional, Sanding width 1100 mm Min. ÷ max. working height 4÷170 mm Gkedpfx Aoxwwgyekyjc Sanding belt width 1115/1370 mm Sanding belt length 2150 mm 2 feed speeds 4.5-9 m/min Feed motor 0.45/0.8 kW Table adjustment motor power 0.25 kW Motor power (HP) for single or dual-head machines 11 kW (15) 50 Hz Operating pressure 6 bar