Used Scm Fs 520 for sale (632)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting length: 4300 mm Cutting depth: 4300 mm Main blade unit Scoring blade unit 1 fixed front table with air cushion 3 movable front tables with air cushion Pusher carriage with approx. 7 clamps OSI Plus software Weight approx. 3277 kg. Available in a few weeks. Ledpfxeznz Uie Aftsrp

Condition: used, Year of construction: 2020, functionality: fully functional, Edgebander SCM K560HP - year 2020. FULL SERVO DRIVES. Serviced by authorized SCM service. Fully functional, currently in operation. Scheduled dismantling of the machine: January/February 2026. Full description of functions in the attached photos. Inspection and testing on site possible. Lodpexn T Sgsfx Aftjrp

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15 Lsdpfjx A E Tfsx Afterp

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Ledpfxsw Idc Re Afterp Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Lrsdpfx Afew Iddustep Max length workable: 2400 mm Max height workable: 250 mm

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning Ledpfx Afszl Hbiotjrp - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Lredpfx Aowwl Nleftop Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), SCM compact 22 four-sided planer max. planing width 220mm max. planing height 120mm Lrodpfeznipzex Aftsp 4 heads, heads included bottom spindle - 5.5KW, right and left together 7.5KW, top - 5.5KW Spindle diameter 40mm Heads fully adjustable up-down, left-right feed on cardan shafts with stepless adjustment electric lifting up-down Machine length 375cm branded machine, well-maintained and in very good condition

Condition: good (used), Code: 0400 Lodpfx Aszbu Azjftsrp Brand: SCM GENIUS Model: M 10/SI Universal 6-works combined machine with 3 motors for woodworking, joinery, furniture, custom-made furniture , window and door frames, doors and various Specifications: Three-phase motors V.380/50 Surface planer: Total table length 1400 mm Table width 300 mm N° 3 blades Motor Hp 3 Thickness planer: Max planing width 300 mm Max planing thickness 150 mm Feed speed 7 mt/min Table lifting by handwheel Circular saw: Max blade diameter 250 mm Hole 20 Max cutting height 85 mm Max cutting width 700 mm Blade tilt 0–45° Motor 2 Hp Panel saw: Flag-type sliding carriage mounted on a movable bar Spindle moulder: Spindle diameter 30 mm Vertical stroke 120 mm Spindle speed 3000/4500/6000/7500 rpm Max tool diameter 150 mm Max spindle projection over table 100 mm Motor 2 Hp Mortising machine: Table dimensions mm 200 x 400 Spindle 0–16 mm Longitudinal stroke 150 mm Transverse stroke 90 mm Vertical adjustment by handwheel Overall dimensions of assembled machine mm 2000 x 1400 x 860 h Weight kg 450

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Lrsdpfxozl Ap Ns Aftjp

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM TF130ps Undercut Spindle Moulder Lsdpfx Afozlw Rnjtjrp Spindle diameter: 40mm Longitudinal carriage in the worktable Total spindle length: 180mm Main motor power: 7kW Spindle speed change via belt drive: 3000/4500/6000/7000/10000 rpm Spindle rotation: left and right Manual spindle lifting Technical documentation Year of manufacture: 2019

Condition: good (used), Year of construction: 1993, functionality: fully functional, Thickness planer Lrodpfjzncr Ajx Aftjp Manufacturer: SCM Model: S 50 Motor: 5.5 kW 4 cutter blocks Feed rate: 7.5 - 25 m/min Planing width: 500 mm Planing height: 240 mm 2 rollers in the table

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, Working area X: 4120 mm Working area Y: 1750 mm Z-axis workpiece passage: 300 mm Lrjdjzncbdspfx Aftep 5-axis electro-spindle, power 13.5 kW Drilling heads for vertical drilling: 13 Drilling heads for horizontal drilling X: 6 Drilling heads for horizontal drilling Y: 4 1 saw blade for grooving in the X direction Linear tool changer with 16 positions Rotary tool changer with 16 positions Pick-up tool changer, position for saw blade Saw blade pick-up on a 1-position magazine Worktable with 8 stops 1 vacuum pump, 250 m3/h Console with PC Eye-M Pro Software: Maestro Active Remote control TecPAD Chip conveyor PRO-SPACE safety system Approximate weight: 6695 kg.

Condition: excellent (used), SCM Casadei C 41 C Universal Combined Woodworking Machine with FT 200 Dust Extractor For sale is an SCM Casadei C 41 C universal combined woodworking machine, manufactured in 2016. Lredpfx Ajznbyxjftop The machine was purchased new from Hudek Zagreb d.o.o. and has been used in production. It is fully operational and can be inspected and tested by prior arrangement at its current location in Antunovac, Croatia. The machine combines several woodworking operations in a single compact unit: Surface planing Thickness planing Sawing Spindle moulding Drilling and mortising Scoring Sliding-table operation Machine identification: Manufacturer: SCM Industria S.p.A. Make: SCM Casadei Model: C 41 C Type: C 41 Designation: Universal combined woodworking machine Year of manufacture: 2016 CE-certified version Country of manufacture: San Marino Machine weight: 628 kg Planer and thicknesser: Working width: 410 mm Surface planer table length: 1,800 mm Thicknessing capacity: 3.5–230 mm Thicknesser feed speed: 7 m/min Circular saw: Tilting saw unit: 90–45° Maximum saw-blade diameter: 315 mm Maximum cutting height: 100 mm Maximum rip-cut width on the right: 900 mm Scoring unit Sliding table Sliding table: Sliding-table length: 2,310 mm Spindle moulder: Spindle speeds: 3,500 / 7,500 / 10,000 rpm Spindle diameter: 30 mm Usable spindle height: 120 mm Drilling and mortising unit: Table travel: X 160 / Y 105 / Z 115 mm Wescott drill chuck: 0–16 mm Electrical and safety equipment: Three motors: 3 × 5.0 kW Power supply: 400 V, three-phase Frequency: 50 Hz Rated current shown on the machine nameplate: 10 A Motor brakes Emergency-stop button CE version Included equipment: An FT 200 dust extractor, rated at 1.1 kW, including a flexible extraction hose, is included with the machine. Condition and availability: Condition: used and operational Previously used in production Availability: immediately Inspection and test run possible by prior arrangement Location: Antunovac, near Osijek, Croatia Price: €7,500 plus VAT The price is negotiable for a serious buyer following an inspection of the machine.

Condition: used, SCM SI400n sliding table saw Lredpfx Afoznbcmotjp Table extension: 200 cm, Main motor: 7.5 kW, Scoring saw, manually adjustable, Max. cutting width from the right side: 1670 mm, Tilt: 0-45 degrees, manually adjustable, Blade height adjustment: manual, Max. blade diameter: 400 mm, 3 blade speed settings.

Condition: excellent (used), Catalog number: 6368 TECHNICAL DATA - max. width of the workpiece: 230mm - max. height of the workpiece: 130mm 7 spindles: 1) horizontal, lower: 230mm, 5.5kW 2) vertical, right: 130mm, 5.5kW 3) vertical, left: 130mm, 5.5kW 4) horizontal, upper: 230mm, 7.5kW 5) horizontal, upper: 230mm, 11kW 6) horizontal, lower: 230mm, 18.5kW 7) universal: 230mm, adjustable at an angle of 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter: 40mm - spindles 4 and 5 adjustable electrically up/down Lrsdpfx Afezlr Dvjtjp - top: 8 feed rollers, metal, twisting, including 2 double rollers - top: 4 feed rollers, rubber - top: 2 pressure rollers - bottom: pawls - bottom, side: 3 pressure rollers - bottom: 2 metal feed rollers, smooth - bottom: 2 double feed rollers, rubber - rollers are pneumatically pressed - feed on Cardan shafts - stepless feed speed adjustment: 5-36 m/min - feed motor: 4kW - electric adjustment of planing thickness: 0.75kW - length of the infeed table: 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction port diameters: 5x120mm, 2x150mm - dimensions (L/W/H): 5500x1840x1900mm - weight: approx. 5000kg ADVANTAGES - Made in Italy - With 7 heads - For wet and dry wood - Last spindle is universal - Unpainted - Used planer, very good condition Net price: 116,900 PLN Net price: 27,830 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2015, operating hours: 3,240 h, functionality: fully functional, machine/vehicle number: S600RCS110, total width: 1,600 mm, total height: 2,050 mm, total length: 2,700 mm, working width: 1,200 mm, grinding width: 1,200 mm, workpiece weight (max.): 1 kg, overall weight: 1,400 kg, grinding height: 170 mm, power: 8.83 kW (12.01 HP), height adjustment type: electric, type of input current: three-phase, compressed air connection: 6 bar, grinding belt width: 1,115 mm, table length: 2,680 mm, table width: 1,230 mm, Equipment: 3rd hydraulic function, fully functional “Sandingmaster” machine from SCM, currently in operation. Lrsdpfx Aezm Slieftsp Additionally available are original, unopened EKAMANT sanding belts of various grits, which can only be used with this belt sanding machine.

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes Lodpfx Aozavvgeftorp - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety feature: - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1988, Max. working width: 630 mm Number of knives: 4 pcs Knife shaft: Tersa knife shaft Motor brake: Yes Max. thickness planing height: 240 mm Min. thickness planing height: 3 mm Max. material removal: 8 mm Lredpfx Afoyq Sflstep Thickness table adjustment: electric/manual & fine adjustment Thickness gauge display: converted to digital display Feed speed, fixed: 6/18 m/min Thickness table spindles: 1 large Infeed rollers: Toothed steel Outfeed rollers: Steel Noise reduction: Yes Weight approx.: 1,000 kg Motor power: 5.5 kW Dust extraction diameter: 150 mm Storage location:

Condition: like new (used), functionality: fully functional, SCM SERGIANE STV 12-13-250 edge banding press Maximum pressing length: 12,000 mm Maximum pressing width: 250 mm Lrodpfxezlhnws Aftep Maximum pressing height: 1,300 mm Number of vertical clamps: 56 Number of front clamps: 12 Pressing force: 5–15 kg/cm² CE certified DTR documentation included Overall length: 16 m Year of manufacture: 2019

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 2933751040F, functionality: fully functional, operating hours: 3,940 h, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 9 m/min, actuation type: pneumatic, total length: 2,540 mm, total width: 1,485 mm, overall weight: 670 kg, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, We are offering this very well-maintained SCM OLIMPIC K201 edge banding machine, manufactured in 2005. Machine features: with pneumatic trimming unit, flush-cutting unit, radius/flush-routing unit, radius-pulling blade unit, polishing disc unit. Price: 4,900.00 EUR net ex works Rodgau plus VAT, loading costs and shipping. Lsdpfjzmxxisx Aftsrp If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2012, number of axes: 5, working width: 1,240 mm, working length: 3,060 mm, Equipment: CE marking, TECHNICAL DETAILS Machining process: Drilling, Milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel thickness: 200 mm Number of working areas: 2 Table type: Flat table Table design: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: Top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: Top Controlled axes: 5 Spindle cooling: Liquid cooling Grooving unit Number of grooving units: 1 Installation position: Top Design: Fixed grooving unit Grooving direction: X-direction MACHINE DETAILS Power of main electrospindle: 8.5 kW Power of milling spindle motor: 8.5 kW Control system: PC Control Programming software: Xylog Plus Number of vacuum pumps: 1 Lodpfx Afozmvqvotsrp Suction capacity per pump: 250 m³/h EQUIPMENT CE marking Front safety mats 16-position tool magazine on the machining head Automatic tool changer Vacuum suction cups for workpiece fixing The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6487

Condition: used, Year of construction: 1996, Mortise spindle Ljdpfezlcx Rsx Aftjrp Tree 50mm Tool for profiling up to 350mm Sold as is, without cleaning or inspection.

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Ljdezc Ilxspfx Aftjrp

Condition: used, Year of construction: 2000, Used machine Year of manufacture 2000 special SCM guide system of the saw carriage. The arc-shaped arrangement between balls and running guides as well as the hardened contact surfaces ensure exceptional and constant precision the scorer can be swivelled in and out from outside without any problem; a special plate enables precise positioning the fence is extremely robust and can be used for both rip cuts and angle cuts; fast return to the initial position. The precise flip stops enable a direct reading of the dimensions over the entire length Table dimensions 830 x 1200 mm Saw carriage 1500 x 290 mm Cutting length 1500 mm Tilt of the saw blade 45° max. diameter main saw blade 300 mm max. diameter scoring saw blade 100 mm max. cutting height 90° = 95 mm max. cutting height 45° = 67 mm Saw blade speed 4000 rpm Scoring saw speed 8000 rpm Lsdpezlbr Ajfx Aftsrp Cutting width with parallel guide 1000 mm Diameter extraction port 100 mm Motor 4 kW Weight: 425 kg Availability: at short notice Storage location: Röllbach