Double chipper + anti-chipping group SCM

SCM

Condition: repair required (used), Year of construction: 2014, machine/vehicle number: AA2/002546, number of slots in tool magazine: 24, overall weight: 6,600 kg, table length: 5,200 mm, table width: 1,300 mm, TECHNICAL DETAILS Table length: 5,200 mm Table width: 1,300 mm Number of milling spindles: 1 Type of milling table: Beam table Tool changer positions: 24 MACHINE DETAILS Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Net weight: 6,600 kg Transport packages: 1 EQUIPMENT Drilling tool Vacuum pump Tools Becker Vtlf 250 vacuum pump: - Year of manufacture: 2008 - Main motor power: 5.5 kW Ijdoy Nybtjpfx Ag Ioat - Connection diameter: 70 mm - Oil-free: Yes Note: The machine requires repair. There is an issue with the CAN bus system.

Condition: excellent (used), functionality: fully functional, Vertical, double-sided press for wood by C.O.P.E. Two working fields with dimensions of 620x110cm. Isdoudy A Nopfx Ag Ieat

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AHH/157/00, functionality: fully functional, total length: 12,500 mm, total width: 2,400 mm, overall weight: 4,000 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit type: Pre-milling unit 2. Unit type: Glue application unit 3. Unit type: Pressure rollers 4. Unit type: End trimming unit 5. Unit type: Rough milling unit 6. Unit type: Corner rounding unit 7. Unit type: Radius scraping unit 8. Unit type: Flat scraping unit 9. Unit type: Brushing unit Iodey Nxrdopfx Ag Isat MACHINE DETAILS Voltage: 400 V Current consumption: 36 A Fuse: 63 A Power: 14.4 kW Dimensions & Weight Dimensions (L x W x H): 12,500 x 2,400 x 1,900 mm Weight: 4,000 kg EQUIPMENT Tools CE marking

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Iedpfx Aey Dta Ssg Ieat

Condition: used, x x x dismantled x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Iaodoip Rdlspfx Ag Iet +++++

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Ijdpfox Twdysx Ag Ioat

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Iajdpfxex Twcvj Ag Ist

Condition: new, 10 quick-change plates, each with 2 rolling stations (suitable for three-star rollers) Shaft diameter 50 Upper shaft adjustable Iedpeur Ncvsfx Ag Isat Lower shaft centrally adjustable Upper and lower shafts with axial adjustment and counters (We are also happy to offer profile rollers with a corresponding design)

Condition: used, Year of construction: 2006, · Working area: 2,650 x 1,240 mm · X-Y travel: 2,995 x 1,385 mm · Z-axis travel length: 200 mm · Clearance height: 180 mm C-axis deactivated – 3-axis machine The base structure is a monolithic construction made of thick-walled steel. It is reinforced throughout the entire machine bed with welded-in triangular plates, which makes it extremely stable. The use of the triangle shape with a broad base for load-bearing parts is the key to lasting precision and stability. The machine layout allows the operator an optimal workflow despite minimal space requirements. The resulting base frame thus provides the machining unit with a balanced and secure foundation, ensuring excellent load distribution. The mobile unit carrier is built as a solid monoblock. It is positioned in X-direction on ground prismatic guides with recirculating ball carriages. The working unit is again mounted on ground prismatic guides and a recirculating ball carriage on this mobile unit carrier. Description of aggregates and accessories (basic equipment) Drilling unit: Drill head with 12 + 6 spindles · 7 individually selectable vertical spindles in X · 5 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill interface: M 10 with 11 mm fitting Grooving saw unit in X: · Integrated in drill head · Grooving saw blade with max. diameter 120 mm Main milling unit (Position 2): · Tool holder HSK 63F · Speed: 1,500 - 24,000 rpm stepless via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Motor power 6.6 kW (9 HP) from 12,000 rpm (S6) · Clockwise/counterclockwise rotation · Ceramic bearings · Includes: 4 pcs. tool holders (right) without collet Tool changer R8L: Automatic tool changer for 8 tools. Mounted on the rear unit carrier for quick tool access. · Number of tool stations: 8 · Max. tool diameter: 120 mm · Max. weight per tool: 4.5 kg Iasdsx Twccjpfx Ag Iot · Max. total weight all tools: 22 kg · Holder for 1 angle gear · Moves in X direction Horizontal milling unit (Position 1): Horizontal unit with two opposing outputs for milling and grooving. · Speed: 9,000 – 18,000 rpm stepless via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (for saw D=120 mm / bore 50 mm) · Motor power: 3 kW (4 HP) · Max. front milling tool diameter: 20 mm · Max. front milling tool length: 110 mm · Max. rear milling tool diameter: 12 mm · Max. rear milling tool length: 80 mm · Max. saw blade diameter: 100 mm · Saw blade bore (ER 32): 50 mm · Saw blade arbor diameter (ER 20): 12 mm Work table: The work table is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system provides maximum flexibility for precise positioning and optimal holding of workpieces. · 6 supports, 1000 mm, steplessly adjustable pneumatically in X direction · 12 round vacuum cups D = 110 mm, steplessly adjustable in Y (2 pcs. per support) · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (6 in total) · Retractable reference stops are CNC controlled · Pendulum machining standard (2 work zones) --- other clamping systems available as options --- Axis movement: The drive system in X, Y and Z is via ground recirculating ball screws...

Condition: good (used), SCM Sandya Uno Wide Belt Sander Working width: 900 mm Working height: 3–160 mm Number of sanding units: 2 Unit with rubber roller Combi unit with pad Main motor power: 11 kW Pneumatic oscillation Abrasive belt dimensions: 930×1525 mm Ijdoy Sr Rrjpfx Ag Ieat Two feed speeds: 4.5–9 m/min Machine dimensions: 1560 x 1280 x 1920 mm Weight: approx. 1100 kg

Condition: used, range L-W-H 490x310x190 mm weight max. in kg 20 kg Iaodpehr Ex Hofx Ag Iet Temperature range -10°+50° °C Colour grün RAL material PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt.

Condition: excellent (used), functionality: fully functional, SCM Superset XL four-sided planer Working width: 15-230 mm Working height: 6-120 mm Number of spindles: 6 Spindle configuration: Bottom Right Left Top Bottom Universal / glazing bead saw unit Spindle speed: 6000 rpm Pneumatic pressure rollers Feed speed adjustable via inverter: 5-25 m/min Drive via cardan shafts CE certificate Iasdpfx Ajy Sr Nnog Ist

Condition: good (used), Code: 0387 Brand: SCM Model: T 115 NOVA - CE Standard Spindle moulder with tilting spindle for woodworking shops, furniture, custom-made furnishings, wooden window frames, doors, wooden joinery, moldings, plastics, composite materials, and various - CE Standard Technical specifications: Spindle tilting -5 +45° Work surface dimensions 1000 x 750 mm Work surface height from floor 920 mm Working height spindle diameter 35 = 140 mm Spindle rotation speed 3000/4500/6000/8000/10000 rpm Motor power 5,5 Hp Mechanical indicator of spindle height Electrical connection for automatic feed Suction port diameter 120 mm Iasdpfx Aey Snq Isg Ist Overall dimensions mm 1100 x 1150 x 1250 h Weight kg 480

Year of construction: 2009, condition: excellent (used), IPM-TP 40 - 400 PIPE SAW for PVC PIPE Application: Cutting and chamfering PVC, PE, PP PIPES With chip extraction fan Min. diameter 40 mm Max. diameter 400 mm Year of manufacture 2009 Accessories: Various clamp jaws Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstraße 6 The machine is my property. Ijdpfx Agevbvzno Isat

Condition: used, working area 2.600 x 1.250 mm spindle drive 7,5 kW feed max. 38 m/min Iajdsn A Dwgopfx Ag Iot x-axis 2.700 mm y-axis 1.600 mm z-axis 250 mm SCM Routech R 3000 CNC machining center for processing sheet material with automatic feeding (vacuum destacker) and discharge. Video: Upon request Special price for self-disassembly and self-collection.