GLUE TANK OLYMPIC K1000

SCM

Condition: used, Year of construction: 2006, number of axes: 3, working width: 2,040 mm, working length: 3,680 mm, TECHNICAL DETAILS MACHINING PROCESS Machining process: Drilling and milling WORKING AREA X-axis working area: 3,680 mm Y-axis working area: 2,040 mm Number of working areas: 2 Number of controlled axes: 3 WORKTABLE Table type: Flat table / Nesting table Number of tables: 1 Table width: 3,680 mm Table length: 2,040 mm Table material: Aluminum DRILLING UNIT Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-axis: 2 Horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 11 MILLING SPINDLE Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 13 kW Dkedpez Enz Ujfx Al Aou Speed: 24,000 rpm Automatic tool changer: yes TOOL MAGAZINE Number of tool magazines: 1 Tool slots: 12 Tool magazine: positioned at the head VACUUM SYSTEM Number of vacuum pumps: 1 Suction capacity: 250 m³/h CONTROL AND SOFTWARE Control: PC-based control Programming software: Xylog Plus MACHINE DETAILS MAIN DRIVE Power of main electric spindle: 13 kW SAFETY CE marking: yes Protective guard: permanently mounted on the machine Safety system: front safety mats EQUIPMENT Aluminum nesting table Suction cups for workpiece clamping Vacuum pump Drilling unit with 11 drilling spindles Milling spindle with automatic tool changer Tool magazine with 12 tool slots PC-based control Programming software Xylog Plus Protective guard permanently mounted on the machine Front safety mats

Year of construction: 1999, condition: good (used), Edgebander Biesse Polymac ERGHO 5, year 1999 Biesse Italy S/N 80709 max. panel thickness 10-45 mm min and max banding strip heught 13-60mm max thickness of banding material in rolls: 0,4mm- 3mm min. panel width 50 mm min. length 150 mm operating speed m/min 10/20 Technical information: Glue Pot VC 700 End trimming unit 701 Edge trimming unit RS 700 Corner rounding CR 200 Tilting Edge Trimming unit +Chamfering RI 700 Compact edge scraper RBK501 Brushes SP700 Edge Sanding unit LV 700 heated infeed guide PLC control panel support guide Large diameter roll holder edge cutting device for 3mm thick rolled edges 400 V , 50 Hz CE- marked Dimensions of the Maschine: ( Lx W x H ) = 4950mmx 1700mm x 1530mm 2900 Kg Dsdpfx Aljgtx Aqj Aeku Technical information under subject of correction

Year of construction: 2018, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, panel saw -Manufacturer: SCM HOLZKRAFT, Panel saw type minimax SC 2C VRS-08 -Main motor: 4 kW -Pre-scoring motor: 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -max. Cutting height: 90° 100 mm / 45° 79 mm Dkedpfx Aloz N Hqke Aju -Miter cut: up to 45° -Cutting width: 920 mm -Table length: -Overall dimensions: 2430/1810/H1030 mm -Weight: 390 kg

Condition: used, Year of construction: 2015, Four-knife 120 mm cutterblock Four selectable feed speeds Dkedpez N Hfbefx Al Asu Heavy cast iron construction Precision thicknessing table with central column guidance 520 mm working capacity 2015 CE

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 – 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Oil-injected screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for operation Max. operating pressure: 11.0 bar Delivery rate: 0.75 m³/min Motor rated power: 5.5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dedohy Tzyjpfx Al Ajku Dimensions W x D x H: approx. 630mm x 800 mm x 900 mm Sound pressure level: 64 dB(A) Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: Dkjdpfx Alezrnwlo Aju – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOG NUMBER: 7946 Technical data: - track width: 300mm - working width of the roller: 300mm - max. blade diameter: 350mm - blade bore diameter: 70mm - max. cutting height: 120mm - table width with extension: 1030mm - table length: 1840mm – Top: - ejectors (barrier protecting against material kickback): 2 rows - sliding roller, metal, pressure roller - ejectors - sliding roller, metal, pressure roller - roller with saw blades - 2 smooth, metal sliding rollers – Bottom: - guide strip - ejectors - track - laser - central track lubrication - stepless feed rate adjustment - feed motor: 1.1kW Dodpfxszr U Hto Al Asku - main motor: 18.5kW - dust extraction port diameter: 200mm - overall dimensions (L/W/H): 1900x1800x1600mm - weight: 1770kg Advantages: - Italian made - with laser - unpainted - very good condition - used multi-blade saw Net price: 55900 PLN Net price: 13000 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. Dksdpfodx R Dfex Al Aju The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: used, Year of construction: 2022, DOUBLE-SWIVELING SAW UNIT: MAXIMUM CUTTING HEIGHT WITHOUT COMPROMISE. RIP FENCE FULL SUPPORT & WIRELESS: APPLICATION AND PRECISION MECHANICS. CONSOLE eye-S: THE USER-FRIENDLINESS OF ACCESSING ALL FUNCTIONS VIA THE CONTROL. Technical data Linvincibile si x Max. cutting height at 90° (mm) 200 with 550mm saw blade Max. cutting height at +45° (mm) 130 with 550mm saw blade Max. cutting height at -45° (mm) 105 with 550mm saw blade Saw blade swivel angle (degrees) -46 ÷ +46 Raising and swiveling of the saw unit programmable Control/work height display Easy Touch Saw blade speed (rpm) 3000 ÷ 5000 (inverter) Main motor power kW (hp) 9 (12) Hz50 Format cuts: - with carriage 3200 (mm) - with carriage 3800 (mm) 3200x3200 3800x3200 Cutting width with parallel fence (mm) 1600 Dust extraction port diameter: - on the frame (mm) - on the saw blade guard (mm) - on the riving knife (mm) 120 100 Standard equipment: - Rip fence completely in aluminum structure with guiding system on dovetailed, hardened, and arc-ground steel guides with large contact area - Version with rip fence 3200 mm - 10-year warranty on the guiding system of the saw carriage - On/off switch for main saw/scorer on the rip fence - eye-S 15" electronic control unit complete with: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental mode: - Height adjustment of the main saw blade - Tilting of the saw unit - Parallel fence adjustment - Height and side adjustment of the scorer (the scorer is automatically raised to the set position when the power is turned on, and lowered when the power is turned off) * Speed adjustment with frequency converter * Operator assistance functions for performing complex cuts * Possibility of saving up to 1000 programs with relative images * Possibility of saving up to 1000 different tools with relative images * Cutting sequence control from preloaded parametric machining programs * Environment for creating and saving new sequential work programs * Automatic acquisition of work dimensions from the Thundercut app * USB port * Preparation for network connection - Auxiliary function of the electronic control with: * Determination of the correct stop position on the fence for format machining with a tilted saw blade * Determination of the correct stop position on the fence for angled cuts with a miter fence on the work table with or without a tilted saw blade - Swiveling control panel over the table - Programmable parallel fence with THK guide-controlled axis and guided by a stable ball screw with a travel speed of 25 m/min. - Parallel fence can be completely swung away under the work table, cutting width on the parallel fence 1600 mm - Support arm for the rip fence with positioning on prismatic linear guides with ball bushings - "Full Support & Wireless". Frame for miter cuts complete with wireless function. Adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system on magnetic strip and LCD display. Real-time updating of the position of the fence, with 3 LCD displays, when changing the saw blade swivel and/or the cutting angle. - Motor power 9kW (12hp) 50Hz - 11kW (15hp) 60Hz - Inverter for electronic speed control from 3000 to 5000 rpm Dedpfx Aez Ny R Rel Asku

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 22 (ca.) Panels thickness (min/max) mm 10 / 45 (60) Numerical Control Eye-M Feeding speed (adjustable) m/min 30 max (ca.) Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) RT/H (2 x kW 4 ca.) Dual-Mode Glueing Unit (Hot Melt Glue + Quick Melt system) VC600 + QMS-P Band Pressure zone (N.C. adjustment) Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit YU/SP (2 x kW 0,55 ca.) Dedsz Nyp Hjpfx Al Asku Rough Trimming unit R-E (2 x kW 1 ca.) Fine Trimming unit RSU/E (2 x kW 0,55 ca.) Multi-Profile? Corners Rounding (contour trimming) Unit C1 + C2 (4 x kW 0,35 ca.) with micro-adjustments? Profile edge scraping unit RCS (IN-OUT) Multi-Profile? Free space Glue scraping unit RCA (In-Out) Hot Air Heater (to reactivate the color of plastic tape) PH 1600 Buffing unit (2 x kW 0,3 ca.) OPTION: Automatic Return System (fastBack)

Condition: as good as new (ex-display), Year of construction: 2026, Exhibit: Compressor Kaeser SM 10 (10 bar) with SIGMA CONTROL 2 Year of construction: 2026 Operating hours: 0,5 Bh Techn.Daten: Volume flow at 10 bar: 0.78 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 630 x 790 x 1100 mm Weight: 220 kg Dksdoipm Iyjpfx Al Aou Connection compressed air: G 3/4 " Sound pressure level: 62 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: like new (used), SCM ‘Profiset 60 EP’ four-sided planer, in as-new (second-hand) condition, for professional use in woodworking. The machine was only switched on once for a test run and has never been used since. Technical data: - Spindle 1: Bottom / 4 kW / 40 mm - Spindle 2: Right / 5.5 kW / 40 mm - Spindle 3: Left / shared motor with #2 / 40 mm - Spindle 4: Top / 4 kW / 40 mm - Spindle 5: Universal / 4 kW / 40 mm - Spindles: 5 - Working width: 230 mm - Working height: 120 mm - Feed: 3 kW Dsdpfxsz Nyfzj Al Aeku - Planing table length: 2,000 mm

Condition: excellent (used), Catalog number 8116 TECHNICAL DATA - Shaft width: 500mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230mm * From top to bottom: - Ratchets - Toothed infeed roller, pulling, helical - Pressure roller - Planing roller - Pressure roller - Smooth outfeed roller, pulling - Motor: approx. 4kW - Manual table lifting - 2 feed speeds: 8/12.5 m/min - Diameter of dust extraction outlet: 130mm - Dimensions (L/W/H): 970x870x1300mm - Weight: 620kg ADVANTAGES – Made in Italy – Used thickness planer, very good condition Dkodpfx Aoz Nhriol Asu Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Ferwood Code: RU0010598 - Manufacturer Code: G042300060 - Condition: Used - Compatible Machine: SCM EDGE BANDING MACHINE - If interested we offer a revision service, contact us. Dkjdpevazhdjfx Al Aou

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Dkedpfjw Enw Isx Al Aju