Used Scm 2041 Fs for sale (576)

Condition: excellent (used), Catalogue number 7739 TECHNICAL DATA Iodpfx Afoxbp Anofstr SURFACE PLANER: - shaft width: 410 mm - 3-knife cutterblock - sound-dampening comb - shaft guard - adjustable angle guide fence - table length: 2060 mm - both tables adjustable THICKNESSER: - max material thickness on thicknesser: 240 mm - thicknesser shaft guard *from above: - anti-kickback fingers - serrated, sprung feed roller - pressure bars - planing cutterhead - pressure bar - smooth outfeed roller - 2 adjustable rollers in lower table - main motor: 5.5 kW - electric brake - electric table height adjustment (up/down) - dust extraction port diameter: 120 mm - dimensions (L/W/H): 2060x970x1150 mm - weight: 660 kg ADVANTAGES – Italian-made – sound-dampening comb – not repainted – in perfect condition – used planer-thicknesser Net price: 22,900 PLN Net price: 5,450 EUR (calculated at 4.2 PLN/EUR) (Prices may fluctuate with larger exchange rate changes)

Condition: new, Work table adjustment in the infeed by means of parallelogram system Display for chip removal via degree scale Simultaneous height adjustment and locking of the work tables complete with anti-tilt device Quick changeover system for changing from dressing to thicknessing operations (CE version) by means of a special support for the opening of the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic assistance. "READY" electronic control includes: - Thicknessing table adjustment - Manual, semi-automatic and automatic mode with 99 storable working programs. - Additional functions: Calculator and hour meter Automatic star delta start for main engine Machine table with height adjustment via 4 steel threaded spindles Rubber-coated feed roller at the outlet Exchangeable feed rollers Link pressure shoes in the infeed Planing shaft and setting gauge for planing knives Micro protection switch for correct positioning of the dressing tables and extraction hoods Dressing hood (CE version) Automatic motor brake on main motor Thermal protection switch Emergency stop switch Lockable main switch CE Declaration of Conformity Technical data [mm Usable working width [mm] 520 Total table length [mm] 2310 Blade shaft diameter [mm] 120 Motor power [kW] 9.0 Hz 50, 400 V Planer shaft speed [rpm] 5000 4 knives [mm] 35 x 3 x 520 Aluminium planing fence [mm] 1200 x 190 Planing fence inclination from 90° to -45 Iedpfx Aed Akyzsffjtr Min./ma

Year of construction: 2022, condition: new, planing width (mm): 520 planing height (mm): 3 - 250 Itsdpfx Ajl Axhcjffor motor power (kW): 9 voltage: 400 volt, 50 Hz minimum workpiece length (mm): 230 maximum chip removal (mm): 6/8 feed speed (m/min): 5-8-12-18 table length (mm): 2310

Condition: good (used), Year of construction: 1995, functionality: fully functional, planing width: 520 mm, number of planer blades: 4, height adjustment type: electric, Equipment: motor brake, Description SCM FS 520 – Surface planer & thickness planer combination machine | Year of manufacture: 1995 | Good condition For sale is a robust and precise combination machine from SCM: Ijdpfxox Aibaj Affstr SCM FS 520, built in 1995, ideal for professional workshops and ambitious carpenters/joiners. The machine has been regularly maintained and is in good technical condition. Technical data & features: + Manufacturer / Model: SCM FS 520 + Machine type: Combined surface planer & thickness planer + Year of manufacture: 1995 + Motor power: 5.5 kW (three-phase) + Cutterblock: Centrofix system (quick knife change, precise cut) + Number of knives: 4 Centrofix knives + Planing width: 520 mm + Thicknessing width: 520 mm + Max. planing depth: approx. 5 mm + Thicknessing height: 3 – 250 mm + Feed speed: 6–12 m/min (2-speed) + Surface table length: approx. 2200 mm (infeed & outfeed table) + Pneumatic table opening: Yes – for easy switching between surfacing and thicknessing + Electric height adjustment of thicknessing table with digital readout + Weight: approx. 1000 kg + Extraction port: 120 mm + Voltage: 400 V Condition & maintenance: + Machine from a well-maintained workshop + Centrofix knives in good condition + Tables flat, bearings run smoothly + Immediately ready for use + No known repairs required You will receive an invoice with VAT shown. Shipping via freight forwarder by arrangement possible. Price: +Negotiable €7650 net ex-stock Haldensleben.

Condition: new, Year of construction: 2025, Dimensions and weights Length approx. 2000 mm width/depth approx. 1110 mm Weight approx. 430 kg Dressing table Feed table length 1034 mm chip removal max. 5 mm Connection suction Suction port diameter thickness 2 x 120 mm Thickness working height min. 3 mm working height max. 230 mm Chip removal max. 5 mm Electrical data Power drive motor 5 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterhead Type TERSA Number of planing knives 4 pcs Speed 5200 min¯¹ Max. planing width 410 mm Feed rate speed 6 / 12 m/min TERSA planing knife system enables particularly quiet running. Itsdpehkz E Tsfx Affsr Diagonally toothed steel feed roller for constant and even material feed Material feed with two speeds Numerical display for thicknessing table height The 2,000 mm long dressing tables allow easy dressing of large workpieces. Working tables are made of grey cast iron, annealed and stress relieved, thus insensitive and permanently flat Stable large aluminium dressing fence with round rod guide (1200 x 160 mm) Thicknessing table adjustment via handwheel with numerical display for planing height The high machine weight ensures maximum precision and smooth running. Powerful industrial motor Robust steel/cast iron construction Equipment details Dressing fence Stable, large dressing fence made of aluminium (1200 x 160 mm) With precise round bar guide Suction hose connection The suction ports for dressing and thicknessing point in the same direction during dressing and thicknessing. The dressing

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 120 mm, rotational speed (max.): 18,000 rpm, workpiece width (max.): 410 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! Iedpfsxw U Nxsx Affjtr TECHNICAL DETAILS Maximum workpiece width: 410 mm Maximum cutting height: 120 mm Maximum speed: 18,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 4 kW Saw spindle: bottom EQUIPMENT CE marking

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and technical data: - Planing width: 410 mm - Min. thicknessing height: 3 mm - Max. thicknessing height: 240 mm - Max. cutting depth: 7 mm - Number of knives: 3 pcs. Tersa knives - Thickness table adjustment: mechanical - Thickness display: mechanical - Motor: 4 kW Itodoxwz Izopfx Affjr - Feed speed: 6/12 m/min - Infeed roller: steel - Outfeed roller: steel - Extraction port diameter: 120 mm Availability: approx. mid-April 2026 Location: Hesse

Condition: new, both working tables open at the same time! working width 410 mm cutter block DM 95 mm knife dimensions 410 x 30 x 3 max. chip removal 5 mm working table length 2200 mm Iedpfx Aodvn Hwjffetr thicknesses table dim. 410 x 775 mm feed speed 6/12 m/ min min. ÷ max. work piece height 3 ÷ 240 mm Motorleistung 5,0 kW, 400V, 50 Hz incl. options: "Tersa”-cuter block Ø 95 mm, with 4 pcs knifes auxiliary fence for small work pieces electric height adjustment for thicknessing table with digital readout

Condition: used, Thickness planer: Max planing width: 400 mm Max planing height: 240 mm Min length of planed workpiece: 200 mm Cutter shaft diameter: 700 mm Number of knives: 3 Cutter shaft speed: 5000 rpm Manual adjustment of working height Jointer: Total table length: 1810 mm Adjustable tables Cutter shaft noise suppression Cutter shaft guard Extraction port: 2x120 mm Tilting fence Supply voltage: 400 V Motor power: 5 kW Iodpfexwvqdsx Affstr Overall dimensions: Length: 2030 mm Width: 800 mm Height: 1160 mm

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Iedpfx Ajvwflboffstr

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives Iodpscnxayefx Affstr With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: new, Year of construction: 2024, Working width: 520 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2300 mm Dressing fence angle adjustable: yes Folding up the dressing tables: pneumatic Maximum passage thickness of thickness planer: 250 mm Thicknessing table height adjustment: electric with position control Planer thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Pull-out roller: Rubber Pressure bar: jointed Table rollers: no Motor power: 7.5 kW Itjdpevadxlefx Affor Motor brake: yes, automatic Suction connection: 160mm Machine length: 2300 mm Machine width: 1100 mm weight: 980

Year of construction: 2021, condition: new, Technical data: usable working width 520 mm total table length 2310 mm cutter block diameter 120 mm cutterblock speed 5000 rpm 4 knives 35x3x520 mm aluminum dressing fence 1200x190 mm planing fence inclination from 90° to 45 min./max. planing height 3 / 250 mm feed speed thickness 5-8-12-18 m/min. Suction stroke diameter dressing 120 mm Suction hood diameter thickness 120 mm Standard equipment: - Work table adjustment in the infeed by means of parallelogram system, indication for chip removal by degree scale. - simultaneous height adjustment and locking of work tables complete with anti-tilt device - quick changeover system to switch from dressing to thicknessing operations (CE version) by means of a special support for opening the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic support - "READY" electronic control includes: - Adjustment of the thicknessing table - Manual, semi-automatic and automatic mode with 99 storable working programs - Additional functions: Calculator and hour meter - machine table with height adjustment by 4 steel threaded spindles - rubber-coated feed roller at the outlet - exchangeable feed rollers - link pressure shoes in the infeed - planing shaft and setting gauge for planing knives incl. the following special accessories: "TERSA" cutterblock with one-way reversible knives, Iedpon Sm Tisfx Affjtr swivelling auxiliary fence

Condition: new, - extra long - one piece - planing tables (2250 mm) from cast iron - simultaneous opening and closing of planer tables with locking system - heavy duty industrial style main motor - fixed suction hood - planer fence dimension 1200 x 150 mm with small parts fence - feeder with 4 feed speeds and separate motor - thicknesser table mounted on 4 solid spindles and linear guides - high quality steel anvil roller - rubber coated outfeed roller - digital display of thicknessing height - autom. star triangle switch Itsdpfxscq E Uuo Affer techiscal data: total planer table lenght 2250 mm max. working width 520 mm max. chip removal 5 mm dimensions thicknessing table 850 x 520 mm min/max. working height 3/ 240 mm feed speeds 5/ /8 /12/ 18 m/min planer head dimension 120 mm/ incl. 4 pcs HSS cutter knifes planer head speed 5000 1/min main motor 400 V/50 Hz/S6 - 40 % 7,0 kW suction hood dimension 1 x 120 mm weight approx. 650 kg - "Teresa"-cutter block Ø 120 mm, mono block, with 4 knifes - additional fence for small work pieces - motorised height adjustment for thicknesser table with digital read out - thicknesser table with 2 rollers

Condition: excellent (used), Technical data: Max planing width: 400 mm Max planing height: 240 mm Knife shaft diameter: 120 mm Number of knives: 4 Feed speed: 6-12 m/min Manual lifting Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Ijdsv Rv Dbepfx Affstr Height: 1250 mm

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Itedevwd U Iepfx Affjr

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Itsdpfx Aoff Hdpjffjr Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AB00033534, planing width: 520 mm, planer shaft diameter: 120 mm, total length of planing tables: 2,310 mm, surfacing fence height: 1,200 mm, number of planer blades: 4, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 5,000 rpm, Equipment: motor brake, Main Features: - Quick-change system for opening the tables - Speed, ergonomics, and safety - Worktable adjustment via parallelogram system - Lasting precision Technical Data: - Usable working width: 520 mm - Total table length: 2310 mm - Cutter block diameter: 120 mm - Planer spindle speed: 5000 rpm - 4 knives: 35 mm x 3 mm x 520 mm - Aluminium fence: 1200 mm x 190 mm - Fence tilting range: from 90° to -45° - Min./max. planing height: 3 / 250 mm - Feed speed thicknessing: 5-8-12-18 m/min - Extraction hood diameter, surfacer: 120 mm Itsdpswwv Ufsfx Affer - Extraction hood diameter, thicknesser: 120 mm Standard Equipment and Accessories: - Infeed table adjustment via parallelogram system for chip removal by degree scale - Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device - Quick-change system for converting from surfacing to thicknessing (CE version), with special support for opening the surfacing tables and automatic pneumatic positioning system for the extraction hood with hydraulic system - "READY" electronic control. Includes: * Thicknessing table adjustment * Manual, semi-automatic, and automatic mode with 99 storable work programs * Additional functions: calculator and hour counter - Machine table height adjustment via 4 steel threaded spindles - Independently motorized feed for thicknessing - Rubber-coated outfeed feed roller - Linked pressure shoes in the infeed - Planer spindle and knife holder with markings as positioning aid, including setting gauge for planer knives - Automatic star-delta start for main motor - Motor power: 9 kW 50 Hz (11 kW 60 Hz) (S6 -40%) [S1] 7.5 kW 10 hp 50 Hz (9 kW 12 hp 60 Hz) [S6 -40%] 9 kW 12 hp 50 Hz (11 kW 15 hp 60 Hz) - Operating tools Safety/Protection: - Micro safety switches for proper positioning of the surfacing tables and extraction hoods - Surfacing guard (CE version) - Automatic motor brake on main motor - Thermal protection switch - 110V auxiliary circuit - Emergency stop switch - Lockable main switch - CE Declaration of Conformity (CE version) Consisting of: R0.20.20 Linvincibile FS 7 CE version 93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz 34.02.15 "TERSA" cutter block with disposable reversible knives, complete with one set of knives 24.06.15 Tilting auxiliary fence for thin workpieces 08.32.28 Base

Condition: new, - new -manufactured by Holzkrafttype FS 41 elite S Tersa DigitalDigitale version with motorischer Dickentischverstellung- Hobelmessersystem ermögclear opening sekundenschnellescutter change soas particularly geräuscharmer Lon- Besonders lange Abrichttische (2200 mm)aus einem piece ermöglichen leichtes  Abrichten derWerkstücke- Arbeitstische sind aus Grauguss, nachgeglüht andspannungsfrei, dadurch unempfindlich and dauerhaft planar- Gleichzeitiges opening der tables- to rear, gleichzeitig öffnende Abrichttische for kurzeRüstzeiten- Leistungsstarker Industrie-motor- Festmontierte dust extraction hood- robuste steel-/Graugußkonstruktion- Gleichzeitiges opening der tables- großer surface fence (serial-production with auxiliary fence)- Materialvorschub with two speeds aboutspearatem motorTechnische Daten:total length der tables:  2200 mmworking width:   410 mmmax. chip removal: 5 mmthickness:dimensions Dickentisches: 775x410 mmmin/max. working height:  3/240 mmfeed speeds: 6/12 m/elwellen D./Hobelmesser: 95 mm/4 piecerpm:   5000 1/minmotor 400 V/50 Hz/S6 - 40 % 5,0 kW (6,6 PS)suction nozzle diameter: 1 x 120 mmweight:    450 kgArt-No.: 550 3441located in: 97447 Gerolzhofen- free on truck- Itsdpfx Aevwgc Usffor

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables made of one piece allow easy dressing of workpieces Working tables are made of grey cast iron, thus insensitive and permanently flat Dressing tables open to the rear, simultaneously, with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time. Diagonally toothed steel infeed roller ensures constant and even wood infeed Rubber outfeed roller in the outfeed of the thickness ensures even wood outfeed Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planer height On/off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for slotted hole drilling device Iodpfxjff Hdms Affstr Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm weight approx. 695 kg Dresser Total length of tables 2250 mm chip removal max. 5 mm fence length 1200 mm fence height 150 mm Dust extraction connection suction nozzle diameter thickness 1 x 120 mm Drive power main motor 7 kW Installation information Space requirement length 2250 mm Space requirement width/depth 1440 mm Explanation of space requirements The dimensions take into account maximum travel distances or effective lengths. Thickness Thicknessi [...]

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Isdpfovwga Hsx Affetr

Condition: new, - NEW -- With TERSA cutter block for secondsChange planer knives- TERSA planing knife system enables particularlyquiet running- Helical-toothed steel feed roller forconstant and even wood intake- The particularly long planing tables from onePiece allow easy dressing of theWork pieces- Large planing fence can open when openingthe planing tables remain in position- Planing tables that open to the rear- The high machine weight ensures the highestPrecision and smooth running- Powerful industrial engine- Robust steel / cast iron construction- work tables are made of gray cast iron,post-annealed and stress-free, therebyinsensitive and permanently flat- Table lips for quiet runningEquipment detailsTERSA planing knife shaft- No more adjusting and screwing- Blade change in seconds- Self-locking- Particularly quiet- Perfect planing resultSuction hose connection- The suction nozzle of the planer and thicknesspoint in the same direction.- The hose connection is made by just oneSide off.- No hose is needed aroundthe machine passes ve- Stable chain drive- Steel drive wheels- Solid cast iron bearing blockPlaning mill- Prevent massive kickback protectionthe kickback of workpieces- TERSA planing knife shaft with three knivesensures an optimal planing patternThe material feed- Helical steel feed rollers for oneconstant and even material intakewithout prints- Multiple teeth grip at the same time for powerfulFeed- Wear-free in contrast to rubber feedrollingTechnical specifications:Length approx. 1725 mmWidth / depth approx. 880 mmWeight approx. 270 kgDressing chip removal max. 4 mmExtraction nozzle thickness 2 x 120 mmThick working height min. 3 mmThick working height max. 230 mmThickness of the chip removal max. 4 mmDrive motor power 4 kWConnection voltage 400 VMains frequency 50 HzPlaner knife shaft type TERSANumber of planing knives 3 pcsSpeed ??5200 min¯¹Planing width max. 300 mmFeed speed 7 m / minItem No. 5503031Storage location 97447 Gerolzhofen- free loaded- Itjdpovwgaaofx Affer

Condition: used, 1 piece SCM FS410 surface planer/thicknesser with piping, as per photos and inspection, self-dismantling required. Colour: grey. Condition: used. Payment method: advance bank transfer. Storage location: joinery/workshop hall 2. Shipping: Collection only – no shipping offered for this item! Itedpfxjx Ifgfo Affsr

Condition: used, Year of construction: 2000, functionality: fully functional, – very good condition – Italian manufacture – year of production: 2000 TECHNICAL PARAMETERS: SURFACE PLANER: – working width: 410 mm – number of knives: 3 pcs – infeed table dimensions: 1030 x 410 mm – outfeed table dimensions: 930 x 410 mm – adjustable fence – noise-reducing comb THICKNESSER: – planing height: 3–230 mm – shaft diameter: 72 mm – shaft speed: 5300 rpm – table size: 700 x 410 mm – feed speed: 7 m/min Iodpoxl D Nqjfx Affetr – main motor: 4 kW – machine dimensions (L/W/H): 200 / 90 / 120 cm – weight: 400 kg

Condition: excellent (used), For sale is a nice jointer-thickness planer from SCM. The machine works flawlessly and can be inspected and tested on site. About the machine: - 410 mm planing width - 3-knife Tersa cutterhead - Motor brake - Tiltable fence Ijdpfx Asxqg Uajffjtr - 240 mm planing height