Used Sawmill Line for sale (9,958)

Year of construction: 2015, operating hours: 1,378 h, condition: good (used), Brand: COLLIN Lab & Pilot Solutions GmbH Type: ZK 25 compounding line Serial no.: 5251-38-15 Year of manufacture: 2015 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D ratio: 48 Connected load: 36 kW Dimensions (LxWxH): 5,000 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 2x Gravimetric feeding systems from Coperion Blodpfx Aeyf Idmsafjc – 1x Side feeding with two possible placements – 2x Liquid dosing units – 1x Vent port for degassing, including vacuum pump – Filament die with 1 cavity – Filament die with 4 cavities – FECON system for process data monitoring – Silicone conveyor belt with active air cooling – Pelletizer with adjustable speed Other: All documentation available in German. Other languages upon request.

Condition: excellent (used), functionality: fully functional, JOULIN AERO board sorting line Technical condition: very good (new wiring and control PLC system) Technical data: * Board length range: 2.4–6 m * Board thickness: 17–120 mm * 10 sorting pockets * Trimmer * Stacking by vacuum lift Line components: * Infeed Bjdpfsygyf Eex Aafjlc * Sorting * Trimmer * Pockets * Mechanization * Stacker (vacuum stacker) * Outfeed For an additional fee, dismantling and installation at the new destination are possible.

Condition: excellent (used), functionality: fully functional, Holtec log handling line Bljdpfx Aajygyd Uofec Technical condition: good Technical data: - Log infeed length: 2.2–22 m - Processed log diameter: 12–45 cm (can sort up to 80 cm, but without debarking) - 2 loading systems (for material up to 6 m and for long logs) - VK450 debarker - Feed speed: 90 m/min - JORG scanning system - Buying station - 2 × 22 bins - Total length: 140 m For an additional fee, dismantling and installation at the new destination are possible.

Condition: reconditioned (used), used Kemper bread line, reconditioned, with round and longmoulder Kemper Superba SU-BR-2500G, rounder 270 cm long, with bucket conveyor BE-13 Bledpfx Aehfdvxeafec

Condition: excellent (used), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum batten length: 85 mm - Minimum batten width: 180 mm - Maximum batten width: 845 mm - Minimum batten height: 10 mm - Maximum batten height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 5 spindles: - Left side: 1) Vertical top spindle 2.2 kW 2) Horizontal bottom spindle 2.2 kW - Right side: Bjdpfxjxxxbne Aafslc 1) Vertical bottom spindle 2.2 kW 2) Vertical top spindle 2.2 kW 3) Horizontal bottom spindle 2.2 kW - Spindles adjustable up/down, right/left - Material hold-down: 2 pcs - Stepless feed speed adjustment: 0–10 m/min - Spindle diameter: 5x100 mm - Dimensions (L/W/H): 1870/2230/1320 mm DDGA - Maximum batten width: 130 mm - Maximum batten height: 100 mm - Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - 6-knife cutterheads mounted on top and bottom spindles - Spindle diameter: 40 mm - Shaper cutters mounted on right and left spindles, max diameter 50 mm - Spindle diameter: 30 mm - 2 feed speeds: 4.9 kW - Central chain lubrication by oil pump - Spindle diameter: 4x125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES - Manufactured in Poland - 5 spindles - Unpainted - Very good condition - Used production line - High quality, low price Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump Bodpfx Aaexwytiofolc - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: new, Year of construction: 2026, 15HP gasoline engine (LIFAN, manual start) Capacity 420cc Bjdpfelk Dyiex Aafjlc The maximum dimensions of the workpiece 790x178x2794 mm The dimensions of the cutting band are 3670x34x0.9 mm Belt speed 17 m / min Pitch between the teeth 22mm Wheel diameter 475mm Dimensions 4064x1778x1800 mm Track dimensions 4042x900 mm Bvxbjjoxyr Transport dimensions P1: 1800 * 550 * 810 mm P2: 2000 * 140 * 95 mm Weight 312/344 kg Additional 2 Meter section costs 350 euro without VAT Electromotive height adjustment

Condition: ready for operation (used), Year of construction: 1995, operating hours: 100,000 h, functionality: fully functional, controller model: partially manual, total length: 65,000 mm, overall weight: 40,000 kg, input voltage: 4,000 V, type of input current: three-phase, Equipment: chip conveyor, corrugation cardboard line, C,B,E flute 1530mm units,the bobbin feet of the machine 4/3single 1 double ,glue transfer unit, heating tunel, side cutting and cut off unit, Included the gaz and air stations, glue preparing unit. all are parts of the production line. Bledpfxowycrce Aafjc

Condition: good (used), Flott p40 with Dofra feed on x, y, z axes. Automatically controlled. Stroke x: 6500 mm Stroke y: 355 mm Stroke z: stroke of the drilling spindle on the drill machine, adjustable from 0 to 160 mm Morse taper MK4 Drilling up to 40 mm Tapping up to M30 Programmable via touchscreen Blodpfxoygrybs Aafoc The drilling process runs fully automatically after setup.

Condition: used, Year of construction: 2000, machine/vehicle number: LC593, Technical Specifications & Performance Data This used bottling line is a complete, second hand pharmaceutical packaging solution designed for the filling and packaging of glass bottles for infusion-type applications. The line is currently in production and supports multiple dosage formats with integrated washing, filling, capping, crimping, sterilization, inspection, labeling, cartoning, and palletizing. Engineered for sterile handling, it uses purified water (PW), water for injection (WFI), and sterile compressed air in critical stages. Production speed: 3500 bottles per hour Bottle volumes supported: 0.2L, 0.25L, 0.4L, 0.5L Container type: Glass bottles (infusion/IV-style) Line configuration: Depalletizer, Bottle Washer (PW/WFI + sterile air drying), Filler, Vacuum stage, Bottle Capper, Aluminum Crimping Machine, Tray Loader, Autoclave, De-trayer, 2 x Manual Inspection Stations, Labeling Machine, Cartoning Machine, Carton Sealer, Palletizer Bledpfxjydpa Ts Aafoc Sterilization: Autoclave by SBM Operation status: In production Advanced Automation & Control Systems The line features integrated handling and synchronized conveyors to maintain steady flow through washing, filling, closing, and terminal packaging stages. Manual visual inspection stations are positioned downstream of sterilization to ensure product quality. Format changeover is designed to handle multiple bottle sizes from 0.2L to 0.5L, enabling efficient batch transitions. Standard pharmaceutical best practices such as sterile air drying and clean utility segregation support controlled operations. Electrical parameters and PLC/HMI specifications are line-dependent and can be aligned with site utilities. Production Line Integration Capabilities As a complete packaging line, this system operates in-line from depalletizing to palletizing. The upstream sections prepare and clean glass containers, the midstream modules manage accurate filling and secure closure with crimping, and the downstream area performs sterilization, inspection, labeling, case packing, sealing, and palletizing. The line offers multi-format flexibility for 0.2L, 0.25L, 0.4L, and 0.5L glass bottles and can be integrated with site-level quality systems and traceability procedures. Conveyors and accumulation zones are configured to balance cycle times across process steps. Machine Condition & Maintenance History The line is currently in production, indicating ongoing operability and maintained status. Washing with PW/WFI and sterile air drying underscores disciplined hygienic routines aligned with pharmaceutical processing. Regular operation across all stations—from depalletizer through palletizer—demonstrates a cohesive, production-ready asset suitable for immediate deployment after site adaptation. Operational Performance & Versatility Designed for glass bottles and sterile liquid products, the line combines precise filling with a dedicated vacuum stage and reliable closure via capping and aluminum crimping. The presence of an autoclave enables post-closure sterilization, while dual manual inspection stations provide visual particle control. The labeling, cartoning, and palletizing modules complete an end-of-line solution for industrial packaging, reflecting tec...

Condition: used, machine/vehicle number: LC594, Technical Specifications & Performance Data This complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations. Production speed: 13,000–14,000 bottles per hour Containers: PET bottles, neck finish 28 1881 Blow molder: Sidel SBO10, 10 cavities Preform handling: Sidel EBH 2050 preform hopper Air conveyor: Sidel-Alsim Rinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K Rinser: 48 clamps, 1 water treatment Filler: 60 isobaric valves Capper: 10 heads Premix/Mixer: Sidel-Alsim, 30 m³/h output Bottle dryer: ACI Labeling machine: Krones Contiroll, rotary, 15 stations, PET wrap-around, roll-fed Shrink wrapper: Acmi Fenix, film-only configuration Handle applicator: Smipack HA 35-50-70 Palletizer: Alsim Valiant 1I 1P, fully automatic, push-type Pallet wrapper: PM Pragometal OBS Rotomatic Standard Advanced Automation & Control Systems Blsdpfxsydn A Hs Aafsc The line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments. Production Line Integration Capabilities Designed for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish. Machine Condition & Maintenance History This second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production. Operational Performance & Versatility Optimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label application at the stated throughput. Downstream packaging includes film-only shrink wrapping and automated handle application for multipacks, with automated palletizing and pallet w...

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Bodpfxeu Tg I Dj Aafolc Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: ready for operation (used), functionality: fully functional, A special machine is for sale. It is a complete production line for the manufacture of heating segments. The production line was built and developed by Bosch itself. The heating segments are suitable for instantaneous water heaters. You can see a picture of the segments in the 2nd picture of the picture gallery. Bedpfxsydlgvs Aafslc The production line also includes a test station. Everything is apparently available in terms of documentation.

Condition: good (used), Year of construction: 2011, Weinig Conturex C4500 CNC Window production machine Description; Year of construction: 2011 Working width 25-260mm Working heigth 10-150mm Powergrip clamping table 3.000 mm Workpiece length 180-4500 mm First processing unit - 20 kW Motor - HSK 63F toolholder - Speed electr. adjustable 0-18.000 t.p.m. (left-right) - Tooldiameter max 330 mm - Sawblade diameter 280 mm - Toolwarehouse 18 positions (100mm distance) Second processing unit - 20 kW Motor - HSK 63F toolholder - Speed electr. adjustable 0-18.000 t.p.m. (left-right) - Tooldiameter max 330 mm - Sawblade diameter 280 mm - Toolwarehouse 18 positions (100mm distance) Bedpfx Aeydkzxeafjlc Powergrip outfeed Tool warehouse 110 positions (87,5 mm distance) Waste conveyorbelt Full description on request Available approx. wk 30/31 - 2026 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, cutting width (max.): 760 mm, Equipment: safety light barrier, STC-Ref:G-172-3199 Bsdeygmf Sjpfx Aafjlc Schneider Senator-76 e-line ,Year: 1991 format: 0x760 mm equipped: - type: Schneider Senator 76-e-line - safety light beam - rear table guard - datastore for programmes - 1 spare knives - 2 sidelay tables - airtable - monitor --> available: 03/2026

Condition: ready for operation (used), Year of construction: 2008, A horizontal high-speed sausage linker Townsend (TECO) (filling, linking, hanging) for cellulose and collagen casings is available. Casing caliber (before cooking): 14.5mm-34mm, max. casing segment length: approx. 430mm, max. production capacity: 2750kg/h, total system dimensions X/Y/Z: approx. 5800mm/1850mm/1300mm, weight: approx. 900kg. On-site inspection is possible. Bjdpfeygmbyox Aafjlc

Condition: good (used), Year of construction: 1996, Rondo Compactline Bun Line - used - year of manufacture: 1995-96 Bjdpfoyglg Uox Aafolc - components: Compactline work table, calibrator, cutting station, moistening station, filling machine, roller, rolling station, guillotine, receiving table, 4 cutting rollers, 3 decorations - length: 7.70 m - stainless steel construction - manual control - machine from production - complete overhaul available on request - ex stock - price on request

Condition: excellent (used), Year of construction: 2000, CORTALAZZI FINTEC CAN LINE MADE IN ITALY 1-Depal Model 2000 2-Rinser 2020 model Slim 250ml/330ml Klasik 330 ml Bsdsygkzwepfx Aafolc Sleek 500 ml 3-conveyour between depal and filler 10 mt 4-filler made in Italy Cortalazzi fintec 50 head model 2000 5-premix made in Italy Cortalazzi fintech model 2000 18.000 Lt/hour 6-Premix cooling heat exchanger gea NT50 model 2013 18.000 Lt/hour 7-seamer SIMA CFT-6 HEAD 2000 model Made in Italy 8-Pano (Cortalazzi fintec 2000 model) 9-35 mt conveyours between filler and shirink 10-twist for date coder 2 set 11-9 mt conveyours before shrink 12-2017 model Mimpak shirink made in Turkey 40 pack/minute 13-3 mt conveyours after shirink 14-Paletiser Ersey made in Türkiye

Condition: good (used), Year of construction: 2005, saw blade diameter: 800 mm, overall weight: 2,960 kg, 15 kW; 400 V; Bledpsygk Hasfx Aafjc

Condition: used, Year of construction: 2011, functionality: fully functional, Bystronic / 2300 x 4500 mm R-L Bodpfx Aajrr Tmcsfslc 2300 x 4500 mm ( doch neu presse in 2011 von 2700 x 3500 mm) 15-60 mm 1000 kg Washer GW D 2300 VR 3 B 15 Gas press ZPG 2700 x 3500 mm VR SP 1 AS 15-60 mm 2300 x 4500 mm 1000 kg cy 2011 Sealing robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg 1-Kopf Versiegelungsautomat / 1 / GMR Stock Place: GMR ES

Condition: like new (used), Year of construction: 2019, Industrial production line for manufacturing nicotine and tobacco pouches, operating at full capacity. Production capacity up to 750 nicotine pouches per minute or 1,050 tobacco pouches per minute. The line is well-maintained, ready for immediate use, and ideal for increasing production capacity or entering new markets. Bsdpfoygilbex Aafslc The set includes a complete production line with all necessary equipment. Manufacturer: Merz-system Model: SB51-1T Year of manufacture: 2019 Condition: as new Category ID: 544 Type ID: 364 Type: Weighing and filling automatic machine If you have any questions or need further information, please write to us or call.

Condition: used, Year of construction: 2019, For sale: Complete Wood-Mizer sawmill line, fully operational and ready for use in a production facility. The package is intended for processing round timber and producing sawn lumber. The offer includes a Wood-Mizer LT70 band sawmill along with equipment for efficient log feeding, material offloading and sorting, and assisted loading operations. Sale exclusively as a complete set – will not be split into individual components. The Wood-Mizer LT70 sawmill features full hydraulic functions and automatic log loading, significantly improving workflow and increasing production efficiency. The set comprises a Wood-Mizer LT70 SE25SRAHS2-SRP2R band sawmill (year of manufacture: 2019), a 6-meter chain log conveyor, a Wood-Mizer CRD2H-LTR sorting table (year of manufacture: 2021), and an Elephant F-250 vacuum lifter (year of manufacture: 2017) for manual handling, with a lifting capacity of 250 kg. Bodpeygh H Rjfx Aafolc This package provides a complete solution for sawmill operations, ensuring efficient organization of the cutting, material transport, and sorting processes. All machines are in good working condition and ready for immediate use. Inspection possible on site by prior appointment. Price for the complete set: EUR 68,000 net Terms of sale: EXW (PL 38-120 Czudec), in accordance with Incoterms 2020. Please contact us by phone for further information or to schedule a viewing.

Condition: used, Year of construction: 1993, Used window production line, primarily utilized for historical window manufacturing (mostly Alt Wien profile). Sold as seen. Further information and price on request, EXW. Blsdpfx Aoygh H Doafsc

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, workpiece weight (max.): 50 kg, working height: 950 mm, controller model: Power Control Steuerung PC22 mit SPS Steuerung, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm Bsdpfxjyghwcs Aafolc (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: GE-KEK-100L, Pre-treatment and Powder Coating Line with Curing Oven (1. Pre-treatment Cabin, 2. Powder Coating Booth, 3. Curing Oven) 1. Manual Chemical Pre-treatment Cabin – 1.6 × 1.6 × 2.2 m – 800 L • Cabin dimensions: 1,600 × 1,600 × 2,200 mm • Chemical tank: approx. 800 L • Pump/spraying unit: ST 84 HE • Heating elements: 2×6 kW (water temperature: 45–60 °C) • Motor: approx. 1.5 kW • Electrical connection: 3×380/220 V, IP68 protection • Manual spray operation, automated circulation, rinsing. Closed system ensures safe chemical handling • Spring-loaded nozzle technology – for pre-treatment directly prior to powder coating Condition: excellent, complete unit, EU-standard control panel, documented operation 2. Industrial Powder Coating Booth Dimensions (external): 1,850 × 1,600 × 2,600 mm • Extracted air: 3,000 m³/h • Motor: approx. 1.5 kW • Filter cartridges: 2 pcs + automatic cleaning • Electrical connection: 3 × 380 V/220 V, 50 Hz • Air velocity: 0.2–0.5 m/s • Max workpiece size (hanging): 250 mm × 1,000 mm • Spray opening: 1,100 × 1,100 mm Accessories: • Sheet metal construction with transparent panel • Extraction fan + silencer • Compressed air tank + preparation unit • Automatic filter cleaning, powder recycling container Blsdpfoygg Rnjx Aafoc • EU-standard control cabinet, pneumatic system + air flow sensor Condition: • Good technical condition, well maintained • Complete documentation and fully operational system 3. Walk-in Industrial Curing Oven for Sale – 1.3 × 1.3 × 2.2 m – 200 °C We offer a professional walk-in curing oven for industrial use, in excellent technical condition! Main parameters: • Usable internal dimensions: 1,300 × 1,300 × 2,200 mm • Curing temperature: 180–200 °C • Curing time: 15–25 minutes • Heating capacity: 2 × 12 kW (electric heating) • Circulated air volume: 1,250 m³/h • Exhausted air: 100 m³/h • Motor power: approx. 1.5 kW • Insulation thickness: 150 mm • Year of manufacture: 2013 Accessories: • Thermally insulated chamber structure with door • Air circulation fan unit • Electric heating elements • Horizontal separator panel • Heat sensor + overheat protection • EU-standard control panel • Air flow sensor • Metal frame Condition: • Regularly maintained, good technical condition • Complete documentation • Ready for immediate operation