Used Sawing Machine for sale (66,018)

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm Gujdpfx Aey H Dmhof Tsh - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting height (max.): 155 mm, cutting width (max.): 1,100 mm, saw blade diameter: 450 mm, cutting length (max.): 3,350 mm, cutting width at rip fence: 1,100 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at parallel guide: 1,100 mm Max. cutting height with 450 mm saw blade: 90°: 155 mm with saw blade at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Dust extraction port D = 120 + 80 mm Angle stop extendable to 3,600 mm, Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable parallel guide adjustment Motors: Main saw: 5.5 kW / 7.5 HP Scoring unit with motor: 0.55 kW / 0.75 HP Sliding carriage made of anodized aluminum incl. high-precision guide made of hardened and ground steel Sliding carriage locking in any position Saw blade guard with swing-away device Outrigger with adjustable angle stop with length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment Gujdpowz Nbasfx Af Tjh from above (opening in the saw table) Display for set saw blade speed Electrical system and safety devices according to CE standard as inspected, Ex Works, from location Seevetal, without pre-carriage, freight and training, subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1000 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scoring unit: no Gsdpfx Afowm Nrcj Touh Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Maximum saw blade diameter: 550 mm Saw blade diameter, fully retractable under table: 500 mm Motor power: 9 kW Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3500 mm Machine width: 2000 mm Weight: 900 kg

Condition: used, Circular saw-milling machine Bernardo FK2, good condition, 2.2 kW, 450 kg Guodpfsx H Uigox Af Teh Price changes reserved; errors, misprints and typographical mistakes excepted.

Condition: used, Equipment: documentation/manual, RES 420 CUTTING SAW Gsdozzdt Uspfx Af Touh MAXIMUM CUTTING DIAMETER: 420 MM CUTTING CAPACITY ON THE FRAME: 420 MM

Condition: excellent (used), Year of construction: 2020, Felder Machines Table saw K 740, year of manufacture 2019 Gujdpfozyn Aqex Af Teh Table saw F 700Z, year of manufacture 2020 Table saw K 700, year of manufacture 2020

Condition: excellent (used), Machines belonging to the LINE (Ref. SOFIT code : YZ0900) Splitting Saw Machine (used to split in two parts the unique workpiece-panel) Minimum length of the workpiece: mm 250 (ca.) Maximum length of the workpiece: mm 3000 (ca.) Minimum width of the splitted workpieces: mm 120+120 (ca.) Maximum width of the splitted workpieces: mm 600+600 (ca.) Gjdpfxsf N Ngbe Af Tsuh Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Max forward speed: m/min 60 Along with the following groups: Lower Scoring Unit (power KW 3) max saw diameter mm 350 Upper Bevel Trimming Unit (power KW 3) max diameter mm 300 Main Sawing Unit (power KW 11) max diameter mm 450

Year of construction: 1985, condition: good (used), Offer 21135 Technical data: Guodpfog Aid Ssx Af Tjh - Roller diameter: 420 mm - Overhang: 410 mm - Max. passage height: 265 mm - Table size: 600 x 600 mm - Table, left and right, can be tilted by 15 / 30° - Table height from the floor: 1020 mm - Saw blade length: 3150 - 3260 mm - Saw band width: 3 - 16 mm - 8 cutting speeds, approx.: 18 - 562 m/min - Drive: 400 V / 1.1 / 1.7 kW - Weight, approx.: 650 kg - Space requirement, approx.: W 900 x H 1900 x D 1000 mm - Electric foot switch

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Godpfjwrb U Tox Af Teuh

Condition: used, Year of construction: 2000, machine/vehicle number: 121528, Item No. 26301 Technical specifications: Godpfx Aezzplijf Tsuh - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm - at 90° up to round 130 mm - square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - mitre adjustable, left + right 0 - 90° - at 45° up to round 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Saw blade feed speed - steplessly adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydraulic material clamping device with hand crank for fine adjustment - Steplessly adjustable clamping pressure - 2 hydraulic backstops - Micro-spray coolant system - Original outfeed roller conveyor with stop 4000 mm - Infeed roller conveyor 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm - Weight approx. 950 kg

Condition: new, Year of construction: 2026, The professional CORMAK BS912N metal bandsaw is a robust and precise machine designed for cutting tubes, profiles and solid elements. The model allows cutting materials with a diameter of up to 230mm and operation at angles from 0° to 45°. Automatic downfeed of the saw arm, lowering adjustment by means of a hydraulic cylinder, a cooling system and a stable cast iron construction make this machine ideal for metalworking shops, production workshops and craft workshops. CORMAK BS912N metal bandsaw – precise angled metal cutting Gujdpfx Aoy En E Ssf Tsh The CORMAK BS912N metal bandsaw is a professional machine designed for precise cutting of tubes, profiles and solid elements. Its solid construction, automatic tool downfeed and hydraulic adjustment of the saw arm lowering ensure convenient operation, repeatability and high cutting quality. The BS912N model allows cutting of materials with a diameter of up to 230 mm and making angled cuts in the range from 0° to 45°. This makes the machine suitable for metalworking shops, production workshops and anywhere that accuracy, stability and machining speed matter. Main advantages of the machine Automatic tool downfeed increasing convenience and cutting repeatability Hydraulic adjustment of saw arm lowering using a cylinder and an oil flow control valve Cutting at angles from 0° to 45° thanks to the swivelling vice Heavy cast iron vice ensuring stable clamping of the material Blade guides with carbide inserts and bearings affecting cutting accuracy and quality Cooling system supplying coolant to the blade and the cut element Wire brush cleaning the blade preventing the blade from clogging Automatic drive shut-off after completion of the cut by means of a limit switch Construction and technology The material to be cut can be fed manually or by means of any mechanical device. The tool feed is automatic, which makes the operator’s work easier and allows stable, repeatable results to be achieved. The lowering speed of the saw arm is adjusted by means of a hydraulic cylinder. The appropriate speed is obtained thanks to a valve regulating the oil flow between the cylinder chambers. This solution makes it possible to adapt the machine operation to the type of material being processed and the expected cutting precision. The required linear blade speed is obtained by changing the ratio on the belt pulleys between the worm gearbox and the drive motor. In the machine base there is a coolant tank with an electric pump, responsible for effective cooling of the blade and the workpiece. Equipment and functions Automatic tool downfeed Hydraulic adjustment of saw arm lowering Swivelling vice with angle scale Quick vice clamp Convenient handle for blade tensioning Blade tension indicator Table for selection of blade tooth pitch and cutting speed Cooling system for the blade and cut material Wire brush cleaning chips from the blade Blade guides with carbide inserts and bearings Automatic limit switch after cut completion Emergency stop of the “mushroom safety” type Technical data Motor 230 V, 50 Hz, 1100 W / 400 V, 50 Hz, 1100 W Blade dimensions 2655 x 27 x 0.9 mm Blade speeds 24 / 36 / 49 / 71 m/min Cutting angle range from 0° to +45° Machine package dimensions 1420 x 500 x 1150 mm Weight 151 / 202 kg Angle 0° Ø 229 191 x 305 max. 355 230 x 230 45° Ø 160 230 x 140 155 x 155

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units of Behringer HBE 321 A dynamic new machines available for immediate delivery from stock. Attention: You can receive up to 15% funding if you replace an old sawing machine with a new one! Equipment: Auto-Feed Control AFC Pro (Pos. 33) Active cut monitoring (Pos. 22) BEHRINGER screw-type chip conveyor (Pos. 105) Godpfx Afjz Epy Ss Tjuh Automatic bar-end detection (Pos. 535) Lighting (Pos. 941)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total height: 34 mm, total length: 230 mm, total width: 2,400 mm, saw band length: 4,700 mm, saw band width: 1 mm, Selling a MEBAMAT 330 12,500 operating hours The machine has cut 99% of plastic. You can find the machine's technical specifications at MEBA. Gsdswhix Espfx Af Teuh

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK BS530 The CORMAK BS530 metal cutting band saw is an advanced industrial machine designed for cutting steel components, pipes, and closed profiles. It is ideal for both workshop applications and serial production, offering a wide range of cutting angles from -45° to +60°. The stable cast iron construction and professional equipment ensure high precision and repeatability of the cutting process. Main advantages of the machine Large range of miter cutting angles – from -45° to +60° with precise angle reading on the scale. Dial tension gauge system – enables accurate control of blade tension, extending saw blade service life. Two-speed blade adjustment – 35/70 m/min, allowing the cutting speed to be adapted to the processed material. Guedpfx Afsv R Tgto Tjh Reinforced hydraulic cylinder – provides smooth arm lowering adjustment via a potentiometer. Ergonomic control panel – equipped with start/stop buttons, coolant control, fast/slow mode selection, and emergency stop switch. Construction and technology The main frame of the band saw is made of high-quality torsion-resistant cast iron, ensuring stable operation even when cutting heavy components. The drive wheels are hardened and ground, while the blade guides equipped with bearings and carbide plates provide precise blade tracking. The drive system is based on a worm gear transmission, ensuring reliability and efficient power transfer. The machine is equipped with a powerful 2.8 kW motor and an integrated coolant system with a pump and coolant collection tray. Precision and work efficiency Thanks to its robust construction and carefully designed blade guiding system, the CORMAK BS530 metal cutting band saw provides quiet, vibration-free operation and high cutting quality. The automatic shut-off function after completion of the cutting cycle and the arm locking system further improve operator safety and ease of use. Applications The BS530 model is designed for professional applications in the metalworking industry, including: workshops, production plants, fabrication shops, processing lines. It is an excellent solution as a band saw for pipes and profiles, as well as for cutting solid materials and tool steels. Standard equipment 34 mm cutting blade Blade tension gauge system Quick-clamping vice with two-way positioning Coolant system with pump and collection tray Control panel with emergency stop switch Optional equipment Roller conveyor table for material feeding Technical data Parameter Value Working height 870 mm Cutting speeds 35 / 70 m/min Band saw blade dimensions 3770 × 34 × 1.1 mm Blade width 34 mm Coolant pump power 0.1 kW Total motor power 2.8 kW Power supply 400 V Machine dimensions 2200 × 1400 × 1500 mm Weight 640 kg

Condition: new, Year of construction: 2023, functionality: fully functional, Equipment features: - Sliding carriage made of anodized aluminium, incl. high-precision guide made of hardened and ground steel - Sliding carriage lock in any position - Saw blade guard with swing-away device - Extension arm with adjustable angle stop with length compensation every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt adjustment for speed change from above (opening in the saw table) Guodpfx Aerrw Ucef Tjh - Indicator lights for set saw blade speed - 3-axis programming unit via TFT 15'' touchscreen on Windows basis, incl. 2,500 program slots, 2 USB ports and 1 Ethernet network connector - Scoring unit with electromotive height adjustment and motorized axial pulse adjustment, including digital display for height and width and width - Angle stop with 3 stop riders; 2 riders with digital display, 1 rider analog but coupled to a digital rider also digitally adjustable - Upper control panel incl. automatic star-delta start - Electrics and safety devices according to CE standard Technical data: - Saw blade inclination: 0° to 45 - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. Cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm. - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP - Noise level according to EN 27960: 84.4 - 2565086.3 dB(A) - Extraction nozzle 1 x 120 mm, 1 x 100 mm - Angle fence extendable to 3,400 mm

Condition: good (used), functionality: fully functional, Hydraulic sharpening machine for band saws. Type Hydromat. Gjdjzdkbkopfx Af Tjuh Also ideal as a spare parts machine.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Cutting plane directly on the saw blade Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life; 6-year HOLZKRAFT warranty on wear of the swivel segments Precision-guided format sliding table made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the sliding table guide rails Parallel fence as standard with round bar guide and fine adjustment Large work table made of milled cast iron Guedpfxjwb Eh Nj Af Toh Smooth operation and precise cuts Standard table extension and table lengthening enable easy work with larger workpieces Extendable aluminum telescope fence with angle adjustment and two professional folding fences Made in Italy Motor 4.0 kW - 400 V Saw blade tilt 90 - 45° Format sliding table length 1600 mm Table length 1020 mm Table width 325 mm Cutting width with parallel fence 700 mm Max. cutting height 90° = 100 mm Max. cutting height 45° = 79 mm Saw blade diameter 315 mm Saw blade speed 315 mm Max. crosscut width to the left of the saw blade 1660 mm Scoring saw blade diameter 80 mm Scoring saw blade speed 7600 mm Weight: approx. 276 kg Note! The parallel fence and table extension on the right are not visible in the pictures. Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2000, operating hours: 38,547 h, functionality: fully functional, machine/vehicle number: 1, grinding wheel diameter: 125 mm, total width: 950 mm, total length: 1,250 mm, total height: 1,870 mm, type of input current: three-phase, input current: 4 A, year of last overhaul: 2018, input frequency: 50 Hz, grinding height: 24 mm, grinding spindle motor power: 2,400 W, input voltage: 400 V, overall weight: 950 kg, grinding spindle speed: 3,972 rpm, spindle speed (max.): 3,972 rpm, The machine is equipped with a second pusher that allows for adjustable single-pass sharpening of the cutter and includes automatic coolant mist extraction. It has always been operated with cooled oil and cleaned with a COMAT machine. Operating speed [mm/s] 0.5–20 mm/s Gedszwhuhspfx Af Touh Saw blade diameter [mm] 80–500 mm

Condition: used, Year of construction: 2000, functionality: fully functional, table length: 810 mm, table width: 975 mm, SECOND-HAND BAND RE-SAWING MACHINE MEBER MOD. SR900 Guedpjx Rt Aaofx Af Tsh - Table dimensions mm. 975x810 - Motor Kw 11 - Year 2000 (CE)

Condition: used, Vollmer Junior B automatic band saw blade sharpener for sharpening band saw blades. Gujdpfxszrx Hwo Af Toh Technical data: - Technical specifications: On request

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Gusdpfx Asw Imptjf Teh Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -

Condition: good (used), Year of construction: 1998, Semi-automatic circular saw machine Manufacturer: KASTO, Type: V350 U, Year of manufacture: 1998 Gusdpfx Afofym Ewo Toh with miter cut, roller conveyor, and stop Saw blade diameter: 350 mm Pneumatic clamping device and saw feed Infinitely adjustable. Machine is in good condition and has seen little use.

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Worktable width: 560 mm Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Gedpfsxua N Ssx Af Tjuh Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim

Year of construction: 1979, condition: used, saw blade diameter 450/500 mm cutting diameter mm stroke mm total power requirement 3,6 kW weight of the machine ca. 1130 t dimensions of the machine ca. m - Circular saw - semiautomatic Guodpfjilfp Nex Af Tsh - hydraulic

Condition: used, The Trennjäger circular saw sharpening machine is suitable for sharpening small circular saw blades. It is designed for the precise resharpening of saw blades in woodworking applications. Technical data: Guodpfx Aozrx H Rjf Toh - Saw blade diameter: max. approx. 300 mm