Circular sawing machines

Robland M 500 M - 550

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 3200 mm Cutting width at rip fence: 1000 mm Ljdpfx Ajxzfw Ieiiorn Cutting width at crosscut fence: 3200 mm Cutting depth: 200 mm Scorer: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade tilt display: Scale Cutting height display: - Rip fence display: Scale Crosscut fence display: Scale Maximum saw blade diameter: 550 mm Saw blade diameter fully retractable below table: 500 mm Motor power: 9 kW Motor brake: yes / automatic Extraction connection: 100 mm and 120 mm Machine length: 3500 mm Machine width: 2000 mm Weight: 900 kg

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang Lodpfxox S Hmzo Aiisrn - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Lrsdpfxjw Nx A Is Aiijn Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Total power requirement 2,2 kw Ljdpfxevz E Sio Aiisrn

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger Lredpfx Ajt Uziteiion * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Specifications: - Performance: 2000 L/h Lrodpfx Aijfhb I Hoijn - Electric demands: 0,5 kW, 230 V, 6 A, monophase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 550x1075x350 mm - Weight: 50 kg - IP65 certified electronics - Food industrial impeller pump - Juice level sensors - Fully automatic operation, very easy to clean. - With 4pcs wheels. Requires minimal maintenance. - The machine is suitable for any Maurer press.

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Lodpfxeyf I T Uo Aiijrn Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: new, Year of construction: 2024, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T68109, functionality: fully functional, power: 4 kW (5.44 HP), cutting width (max.): 1,000 mm, saw blade diameter: 315 mm, cutting length (max.): 3,200 mm, F25 basic equipment - Manual height and tilt adjustment 0–46° of the saw blade, with digital display - Drive power 4 kW (5.5 HP) at one speed, 4,200 rpm Lredpfxowwv Rms Aiion - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Equipment package type 6 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,000 mm - Riving knife with extraction - Preparation for scoring unit

Condition: new, Year of construction: 2025, Cutting length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 1565 mm (telescopic extension up to 2550 mm) Cutting depth: 170 mm Scoring cutter: no Sawblade height adjustment: handwheel Sawblade pivot adjustment: handwheel Width stop adjustment: manual Sawblade angle indicator: scale Cutting height indicator: - Width stop indicator: scale Lrodpfjqx Igqjx Aiion Crosscut ruler indicator: scale Sawblade diameter: 500 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 9.2 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 2900 mm Machine width: 1800mm Weight: 800kg

Condition: new, Table dimensions 2500x 780 mm Motor output 7,5 kW Lodpfx Aisxpi D Isijrn Spindle diameter nach Bedarf mm reus 1.500 - 10.000 U/min