Used Sawing Machine for sale (66,248)

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power Fodpfx Adeudi Unj Iogd 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: excellent (used), functionality: fully functional, Schmidt Tempo EC 500 Saw Blade Sharpening Machine for SHARPENING and RE-TOOTHING of HSS and segmented circular saw blades, including beveling the teeth on the top/bottom. Diameter: approx. 20 - 500 mm Saw blade thickness: max. 6 mm Working speed: approx. 40-100 teeth / min. Grinding wheel diameter: max. 200 mm Number of teeth: 20-999 (electronically selectable) Tooth shapes: Angle tooth A, AW, curved tooth B, BW and C according to DIN 1840 (electronically selectable) Adjustment options: - Tooth shape (electronically selectable) - Number of teeth (electronically selectable) - Automatic feed - Automatic dressing device - Free grinding (electronically selectable) - Oscillating grinding (electronically selectable) - Circular grinding (electronically selectable) - Re-grinding segments - Setting the direction of rotation (electronically selectable) - Halving the number of teeth (electronically selectable) for beveling the teeth - Adjusting the tooth height difference - With LED display - Error message display Fsdpfx Ashua E Dsd Isgd Included accessories: - Noise protection hood - 10 grinding wheels of various widths - small, medium, large saw blade arbor (60, 120, 180 mm diameter) - small, large grinding wheel arbor (80, 120 mm diameter) - 1 set of standard reducing rings 16 x 20, 22, 27, 32, 40, 50 mm - Saw blade support - Operating manual, wiring diagrams Weight: approx. 880 kg Connection power: 2.5 kW Connection voltage: 400 V Paint: Green Machine is in very good original condition and can be inspected/tested while powered. Machine is sold with a 100% functional guarantee upon delivery! Spare parts/accessories can be supplied if required. Errors and prior sale excepted.

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! Fgodpfx Ajwqplked Ijd for sale as spare part dispenser! *

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 550 mm, grinding wheel diameter: 150 mm, total width: 1,200 mm, total length: 1,200 mm, total height: 1,250 mm, type of input current: three-phase, input current: 4 A, input frequency: 50 Hz, grinding spindle motor power: 1,900 W, input voltage: 400 V, overall weight: 220 kg, spindle speed (min.): 3,700 rpm, Equipment: rotational speed infinitely variable, Loroch SW 550 machine in good working condition, ready for operation. The machine is suitable for professional workshop use. - saw blade dia. from 100 - 550mm - suitable for HSS saw blades for wood and metal cutting. - HSS saw blades geomeries - A, B, BW, C Fgsdpfxey Sgqto Ad Ied - Water cooling - additional device for shaping band saw blades - Manual in Czech language (but it is simple machine)

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3585, Offer 25255 Technical data: - Saw blade diameter up to 300 mm Fedpey R Ablefx Ad Iogd - Saw blade feed via hand lever - Maximum vise opening width: 145 mm - Cutting capacity with saw blade diameter 300 mm: - At 90°: round 95 mm flat 125 x 90 mm - At 45°: round 95 mm flat 95 x 85 mm - Mitre adjustment: left up to 30° / right up to 45° - Saw blade speeds: 20 and 40 rpm - Drive: 400 V / 1.6 / 2.1 kW - Coolant system - Discharge roller table: 1500 mm - Required space approx. W 600 x H 2000 x D 800 mm - Weight approx. 250 kg

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. Fjdpfx Aoy Erzdjd Isgd 2x HITACHI SEIKI CNC lathes

Condition: good (used), Alber sharpening machine for band saw blades Blade width 50 - 206mm Fodpfx Adsglui Ao Iegd Tooth pitch 20 - 50mm

Condition: excellent (used), Fully automatic band saw planing machine Oppliger Fodpsd Sr Sijfx Ad Iegd Type PBS 860

Condition: like new (used), Year of construction: 1978, Brazing machine for carbide saws VOLLMER model ML600 Fedpfxef Rlf Rj Ad Iegd

Condition: excellent (used), Band saw grinding and setting machine VOLLMER model BN30TS Fgsdpohhdaxsfx Ad Iod

Condition: excellent (used), HSS saws chamfering machine EYAN Fgsdpfx Adshzcd Us Ijd

Condition: excellent (used), Year of construction: 1986, Brazing machine for carbide saws VOLLMER model LG21H Fgedjfxxxdopfx Ad Ied

Condition: not inspected (used), I sell the saw blade and saw band sharpening machine Stankoimport TCPA-6, Made in Russia. Fjdpfxod Hx R Do Ad Ijgd

Year of construction: 1980, condition: excellent (used), I sell the saw blade and saw leaf sharpening machine Loroch G77, Made in Germany. Fgjdpfxoim Ea Do Ad Ied

Year of construction: 1992, condition: used, Vollmer Saw blade sharpening machine Type NS 700 Year of manufacture: 1992 Fodpfxjkmnyfe Ad Iogd

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Fedoq S Uwbepfx Ad Isgd Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories used

Condition: good (used), Year of construction: 2000, Offer 24477 Fgedpfoy H Dmhex Ad Iod Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: good (used), Year of construction: 2002, Station 1: Cutting components to length Station 2: Drilling in the end face at pitch dimensions of 27, 32 or 60 mm, to a depth of 95 mm Fgsdpfey Hv Uqjx Ad Ijd Station 3: Additional drilling in the end face or blowing out the drill holes from Station 1 Station 4: Deflection testing Processing of strips: possible with lengths between approx. 400/450 mm up to approx. 2500 mm

Condition: good (used), Year of construction: 2002, Station 1: Cutting components to length Fgedjy Hv Nujpfx Ad Iod Station 2: Drilling in the end face at pitch dimensions of 27, 32 or 60 mm, to a depth of 95 mm Station 3: Additional drilling in the end face or blowing out the drill holes from Station 1 Station 4: Deflection testing Processing of strips: possible with lengths between approx. 400/450 mm up to approx. 2500 mm

Condition: good (used), Circular Saw Blade Sharpening Machine Manufacturer: unknown Circular saw blade diameter: up to approx. 200 mm Grinding wheels: 160 x 15 mm Connection: kW Saw dimensions: 320 x 340 x 500 mm Base cabinet dimensions: 410 x 410 x 590 mm Fgsdpfx Aey Hgplod Ied Accessories/Equipment: Condition: good Weight: 100 kg Overall dimensions: 410 x 410 x 1,100 mm

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST D2 002, saw blade diameter: 250 mm, overall weight: 2,850 kg, cutting width (max.): 450 mm, Two-spindle multi-saw wood cutting machine JL32 Good working condition Max. 10 circular saw blades on the spindle, diameter 250mm x 70mm Main spindle dimensions: diameter 70mm, length 420mm Feed rate (cutting): 5-25 m/min Machine dimensions: length 2200mm, width 1500mm, height 1900mm Machine weight: 2850kg Fjdpfoy E Snqjx Ad Ijgd Voltage: 380V Main motor power: 30kW and 22kW (2950 min-1) Feed motor power: 0.75kW and 0.75kW (900 min-1)

Condition: excellent (used), Machines belonging to the LINE (Ref. SOFIT code : YZ0900) Splitting Saw Machine (used to split in two parts the unique workpiece-panel) Minimum length of the workpiece: mm 250 (ca.) Maximum length of the workpiece: mm 3000 (ca.) Minimum width of the splitted workpieces: mm 120+120 (ca.) Maximum width of the splitted workpieces: mm 600+600 (ca.) Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Max forward speed: m/min 60 Along with the following groups: Lower Scoring Unit (power KW 3) max saw diameter mm 350 Fjdpfx Adjf N Ngbs Isgd Upper Bevel Trimming Unit (power KW 3) max diameter mm 300 Main Sawing Unit (power KW 11) max diameter mm 450

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): Fgedeu Tqb Uepfx Ad Iod - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350

Condition: new, Year of construction: 2026, BAND SAW MACHINE CORMAK BS912N Specification: The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The lowering speed of the saw arm is adjusted using a hydraulic cylinder. The appropriate speed is achieved via a valve regulating oil flow between the cylinder chambers. The desired blade speed is obtained by changing the transmission ratio on the belt pulleys between the worm gearbox and the drive motor. A coolant tank with an electric pump is located in the base. High precision and solid construction place this machine among the leading band saws in its class, offering a large cutting capacity of up to 230 mm and angle cutting from 0° to 45°. The CORMAK BS912N band saw, thanks to innovative improvements combined with high-quality bimetal blades, is widely used in metalworking shops where precision, quality, accuracy, and cutting speed are essential. The cutting angle is set using a swivel vise in the range of 0°–45°. The vise features massive walls made of durable cast iron. At the rear of the vise, there is an angle scale for quick and convenient angle adjustment. Both blade guides are equipped with a cooling system that supplies coolant to the blade and the workpiece. This model includes a convenient blade tensioning handle and a quick-release vise clamp for the workpiece. The saw arm features a blade tension indicator and a chart for selecting blade tooth pitch and cutting speed depending on the type of steel being cut. At the lower position of the arm (after completing the cut), the blade drive is automatically switched off via a modern limit switch. Safety during operation is ensured by an electrical system that meets all CE requirements. The machine is equipped with a limit switch that stops it after cutting, an emergency stop button (“mushroom type”), and multiple micro-switches that shut down the machine if, for example, the belt guard or blade guard is opened. Additionally, the machine is equipped with a wire brush that cleans chips from the blade, preventing clogging and improving cutting efficiency. The blade guides are fitted with special carbide plates and bearings, significantly improving blade guidance, durability, straightness, accuracy, and cutting quality. Carbide guiding greatly reduces wear of both the machine and the blade. The arm, made of profiled ductile cast iron, ensures rigidity during operation and absorbs vibrations. The control panel is mounted on the saw arm. Fgsdey En E Sjpfx Ad Iod Technical Data: Technical specifications Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Belt dimensions 2655x27x0.9 mm Belt speeds 24/36/49/71 m/min Cutting angle range From 0 to +45 degrees Machine packaging dimensions 1420x500x1150 mm Weight 151/202 kg MANUAL IN ENGLISH

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) Fodpfjyx S N Ujx Ad Iogd - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)