Used Sawdust Stoves for sale (241)

Year of construction: 1987, condition: good (used), max. drilling and milling diameter 20 mm maximum drilling depth 180 mm the largest drilling length 180 mm table surface dimensions (length / width) 280/600 mm Tjdpfx Adoiduhzjnef the greatest distance from the table surface to the spindle axis 130 mm spindle speed 2800 rpm. engine power 2.2 kW air demand for sawdust extraction suction 300-350 m3 / h air speed in the extraction system 19-22 m / s squeegee tip connection diameter 80 mm dimensions (length / width / height) 1240/800/1350 mm weight 350 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Todpfxstk It Se Adnef Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: like new (used), Gas countertop stove with 2 burners; each 5.5 kW Purchase date: 2021, week 47 Manufacturer: Electrolux Dimensions (W x D x H): 400 x 730 x 250 mm Model: E7GCGD2C00 Gas connection rating: 11 kW Weight: 20 kg Tjdpfx Ajxgppxsdnsf Main connections at the rear Front access to all components. Unit with service channel for easy installation.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: 23012209, This is a 2-burner stove from the premium manufacturer MKN, model Optima 850, year of manufacture 2023. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The stove is in very good used condition. You will receive an invoice with VAT shown separately. The manufacturer's recommended retail price (RRP) is €5,780 net. Our used equipment service for you: • 6-month warranty on all electrical components • High-quality branded appliances at fair prices • Professional refurbishment/inspection & expert cleaning • Tested & fully functional – or your money back • Flexible choice of shipping or pickup • Expert advice – before and after your purchase • Provision of operating manuals, connection diagrams & spare parts Technical data: • External dimensions (W x D x H): 400 x 850 x 700 mm • Type: Optima 850 Type 2063401 • Model: 2063401 • Year of manufacture: 2023 • Serial number: 23012209 • Weight: 47 kg Condition: Used, comprehensively inspected, fully functional Further specifications: • C-burner 3.5 kW (front), E-burner 7.0 kW (rear) • DN 20 (3/4") gas connection required • Heavy-duty removable cast iron grates • Open base with adjustable stainless steel feet Features: Atmospheric burners, pilot burner, thermoelectric safety device, universal gas valve, shut-off valve Nominal heat load: 10.5 kW, natural gas 20; 25 mbar or LPG 30; 37; 50 mbar Shipping: • Delivery or pickup by arrangement • Worldwide shipping on request Todexb Agtopfx Adnef • Shipping to islands or mountain stations only by prior arrangement

Condition: used, Year of construction: 2017, operating hours: 2,000 h, Used filling monoblock for Oil and spirits – Polaris model B6 – speed max 1500 BPH WHY CHOOSE A POLARIS LINE mod B6 for OIL and spirits; We summarize the main characteristics of our used filling monoblock; and which make them UNIQUE on the market: • Elasticity of work that allows you to switch from one bottle format to another. Acting with simple operations and without replacing parts of the machine; this flexibility is also particularly suitable for those who carry out the third party. • Speed ​​of the format change that can be carried out from 10 to 30 minutes at the most. Given the reduced times, the line can be easily used even for small production batches. • Use of any bottle format; cylindrical, square, triangular, amphorae, flasks, etc. from 0.100 to 2lt in glass and PET. • We designed our labeling system, in such a way as to guarantee the maximum laying precision, on each type of bottle. Lines B6 Can Be Composed By The Following Machine Parts: 10 place rinsing machines uses water from the aqueduct or recyclable liquid. (In this case you can add a recycling unit consisting of a pump) 5 micron filters and liquid storage tank. 10 place blow molding machines, as an alternative to the rinsing machine, if the bottle cannot be wet before filling. The blowing machine allows you to blow prepared air or nitrogen inside the bottle. 10 nozzle fillers. Depending on the type of product. Different types of filling can be used and specifically: Tsdjwa Tnzspfx Adnsf  Vacuum in the bottle; (for oils, syrups, spirits or when you want a quick filling). By gravity, with initial slight depression (for wine or foamy liquids). Pressure (for PET bottles or for particular liquids). Automatic washing system inside the filler – Used filling monoblock POLARIS Leveler: which allows obtaining the legal content, It is possible to change the bottle format without changing the nozzle thickness. Capper that can apply various types of caps: screw, pressure, mushroom and Guala etc. To change the type of cap, it is necessary to change a capper accessory. Heat shrink or foil capsule dispenser. For the restriction of the retractable capsules, a restriction stove equip the line for the closure of the foil capsules, and mount rolling heads. Labeling machines for the application of self-adhesive labels on the front, back on the neck or other parts of the bottle. Operational heads for the application of fiscal seals both with paper and glue and self-adhesive L to U, side. Thermal transfer stamp for printing dates of reads and lot numbers on the back label or an ink jet marker, laser, can be applied. Accident prevention protections according to CE standards with doors or electronic barriers. All materials in contact with the product are for food use as per CE regulations. In addition, you can add other equipment to carry out further operations, such as: Equipment for other types of caps.

Condition: used, Year of construction: 2015, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: 1637, power: 75 kW (101.97 HP), Equipment: emergency stop, safety light barrier, We offer a fully operational briquetting line with a current capacity of 1 ton/hour, producing high-quality cylindrical briquettes (Ø 85 mm), expandable to 2 t/h The line has been in operation since 2015 and is still running – available for inspection in production until end of October 2025. Main equipment (2015 installation): Briquetting press DiPiu MB-90 (Italy) Fully automatic saw for briquette cutting Automatic packaging line (5 pcs = 10 kg bundles) Stretch-film pallet wrapping system 2 × Fiedler boilers, 600 kW each 2 × BS-2 drum dryers Taurus crusher (CZ) Cyclone and dedusting system Digital control & monitoring system by KME Brno (remote monitoring, SCADA type) Upgrades (2018): Star screen system (separating oversized particles from sawdust) Bucket conveyor (feeding raw material from crusher to 5 m³ buffer hopper above press) Additional conveyors between production stages Optional equipment (extra cost): Second DiPiu MB-90 briquetting press available Additional automatic saw → allowing expansion to 2 tons/hour capacity Product quality: Briquettes supplied into major retail chains (e.g. Hornbach) – proven premium quality. Price & conditions: Asking price: E 280 000 (negotiable for fast decision) Availability: November 2025 Location: Volenice, Czech Republic Condition: Used, well maintained, fully operational Reason for sale: Facility to be converted into new metal workshop. Zu verkaufen: Komplette Brikettierlinie – Kapazität 1 t/h (erweiterbar auf 2 t/h) Wir bieten eine voll funktionsfähige Brikettierlinie mit einer aktuellen Kapazität von 1 Tonne pro Stunde, die hochwertige zylindrische Briketts (Ø 85 mm) produziert. Die Anlage ist seit 2015 in Betrieb und läuft noch heute – eine Besichtigung im laufenden Betrieb ist bis Oktober 2025 möglich. Hauptausstattung (Installation 2015): Brikettpresse DiPiu MB-90 (Italien) Tedpfx Adexga Rtsnef Vollautomatische Säge zum Brikettieren Automatische Verpackungslinie (5 Stück = 10 kg Bündel) Stretchfolien-Palettenwickler 2 × Fiedler-Heißwasserboiler, je 600 kW 2 × Trommeltrockner BS-2 Taurus-Zerkleinerer (CZ) Zyklon- und Entstaubungssystem Digitales Steuerungs- & Überwachungssystem von KME Brno (Fernüberwachung, SCADA) Modernisierung (2018): Sternsieb-System (Abtrennung von groben Partikeln) Becherwerk (Förderung des Rohmaterials vom Zerkleinerer in den 5 m³-Pufferbunker über der Presse) Zusätzliche Förderbänder zwischen den Produktionsstufen Optionale Ausstattung (gegen Aufpreis): Zweite DiPiu MB-90 Brikettpresse moeglich Zusätzliche automatische Säge → ermöglicht eine Erweiterung auf 2 Tonnen pro Stunde Kapazität Produktqualität: Briketts wurden an große Einzelhandelsketten (z. B. Hornbach) geliefert – nachweislich Premiumqualität. Preis & Bedingungen: Preisvorstellung: €280.000 (verhandelbar bei schneller Entscheidung) Verfügbarkeit: ab November 2025 Standort: Volenice, Tschechische Republik Zustand: Gebraucht, gut gewartet, voll funktionsfähig Verkaufsgrund: Umstellung der Produktionsstätte auf eine neue Metallwerkstatt.

Condition: good (used), Engine: 18.5 kW Cutting dimensions Max log diameter: 95 cm Clearance between rollers: 73 cm Max cutting width (cant): 64 cm Max cutting height above blade: 39 cm Tsdpfexhb Uvex Adnjf Max cutting length: 12 m Head unit equipment Automatic cutting thickness adjustment device Head feed up/down: Electric Head feed forward/back: Electric Blade guide arm: Electric Blade tensioning system: Hydraulic with air cushion Debarking unit Sawdust extraction opening diameter: 150 mm Blade Length: 4670 mm Width: 38 mm / 50 mm Blade guide wheels Diameter: 600 mm Type: With belt Material: Cast iron Full hydraulics

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg Todpjxaa Ulsfx Adnjf workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Condition: good (used), approx. 275 pieces SSI Schäfer, storage tray / shelf box LW530 , sheet steel, D 485 x H 300 x W 980 mm - second-hand -: Price per piece ex location: 25.- € (net)! Price for complete purchase: only 19.-€ (net)! We reserve the right to a minimum purchase quantity! Some of the trays are equipped with dividers - these are included at no extra charge (as they are)! You can stack the storage trays directly 5 high and use them as shelves, or the storage trays also fit into shelves with 1m x 0.50m shelves (with brackets that can be purchased even without shelves). Manufacturer: SSI Schäfer Type: Shelf box LW 530 Year of manufacture: unknown Outer width [mm]: 485 External height [mm]: 300 Outer length [mm]: 980 Tsdpsui I Dmefx Adnjf Version with label holder Floor construction: closed Width [mm]: 485 Color: stove-enamelled blue Weight [kg]: 10.45 Height [mm]: 300 Length [mm]: 980 Conductive: No Dimensions [mm]: D 485 x H 300 Material: Steel Nestable: No Recyclable Stackable: Yes. Max. 5 fold Wall construction: closed Dividers allow up to 12 compartments Can be used with support profiles in shelves (also without shelves) New price: approx. 100.-€ (net) / piece Condition: good, mostly with stickers / labels Available: immediately Location: Achim (near Bremen)

Condition: used, functionality: fully functional, Dear Sir or Madam, On behalf of a customer, we are selling a Unimog U1550L expedition vehicle with top-of-the-line equipment and in good condition. Vehicle data: Mileage: 318,533 Year of manufacture: 2002 Total weight: 7,500-8,500 kg depending on load Engine: 176 kW/240 HP Euro 2 Vehicle equipment: -4-chamber fuel tank system for 560 L diesel -Tire pressure control system -Navigation system -32 gears (16 forward and 16 reverse, crawler gears) -Quadruple immobilizer -GRP 6-10 cm thick -Water and dustproof for temperatures from -40°C to +40°C -Solar panels on the roof -310 L drinking water tank -22 L hot water heat exchanger -80 L waste water tank -Tow bar -Sand guards -Outdoor shower and water tap -Cable winch front and rear -Cow Bar -Halogen headlights -Air conditioning -Pneumatically suspended Recaro seats (adjustable, heated, ventilated) -3rd seat -and much more Equipment inside: Kitchen: -Refrigerator with freezer compartment -Sink with hot and cold water -3-burner propane stove -Oven -Storage compartments Bed: -For 2 people -Storage options -LED reading light Cabinets: -With wall mirror -Storage space for clothes and laundry -Storage space for groceries Bathroom/WC: -Porcelain toilet with flushing function -Sink -Mirrored cabinet -Hot/cold shower -Shower vent with mosquito net -12/24/220 V connection Todpfxswm Ig Se Adnef -2nd Bench seat (can be converted into a third bed) - 310L drinking water tank - 22-liter hot water heat exchanger - 80L waste water tank - Drinking water filter system and much more. If you have any questions, please do not hesitate to contact us! Our business hours: Mon-Thurs: 7:00 a.m. - 3:30 p.m. Fri: 7:00 a.m. - 3:00 p.m. If you have any further questions, please do not hesitate to contact me. For viewings and/or test drives, please make an appointment in advance!!! Vehicles/equipment are not always available on site. We are selling this vehicle on behalf of the owner. This is a private sale and therefore excludes any warranty or guarantee.

Condition: new, Year of construction: 2025, functionality: fully functional, FM300 extractor is a simple machine for extracting chips and sawdust. Capability of quick bag replacement and portability due to the wheeled base make our extractor very practical. Additionally, absorber's metal rotor ensures quiet operation. Despite providing such great features as failure-free operation and high efficiency, it is very affordable. Metal balanced rotor ensures vibration-free and quiet operation Quickly mounted BURLAP extraction bag 4-wheeled base makes it portable Stable, metal construction Tsdpfxovu Atwe Adnof Default equipment Y-shaped extracting connector, 2×100 Metal wheeled base Technical data Suction efficiency 2530 m3/h Engine speed 2850 rpm Bag capacity 150 L Number of bags 2 Extracting connector diameter 1×130, 2×100 mm Dimensions (L×W×H) 940×510×1960 mm Weight 56 kg Motor power 1.5 kW Power supply 3-phased, 400V EC declaration yes

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, We offer a heating system from the Austrian company Fröling. Boiler with a heating capacity of 500 kW. Type TURBO MAT 500. Boiler for biomass, bark, wood chips, sawdust. Year of manufacture: 2007. Fuel screw conveyor with a length of 8.5 m and a diameter of 200 mm. Moving grates. Set of pumps and valves. Very good technical condition. Additional photos on request. Tsdpfx Adot Hq H Eonof

Condition: used, Year of construction: 1997, operating hours: 6,031 h, total width: 1,200 mm, total height: 1,520 mm, total length: 1,600 mm, briquette diameter: 60 mm, overall weight: 850 kg, type of input current: three-phase, power: 5.5 kW (7.48 HP), Good morning, We offer for sale a hydraulic sawdust briquetting machine from the renowned Italian company PRODECO model M60. Todpfxsq U Dcie Adnsf Below is some useful information about the machine: * briquette diameter 60 mm * 5.5 kW motor * mileage 6,031 mh * hopper with a capacity of about 750 l * capacity about 50-90 kg, depending on the type of sawdust * machine with a controller to set the parameters of work and squeeze depending on the type of sawdust. * possibility of working in manual or automatic mode ( sawdust presence sensor in the tank ) * 1997 year of production * weight 850 kg * overall dimensions 120 x 160 x 520cm ( W x L x H ). The machine belongs to my customer at the request of which I sell it. The briquetting machine has undergone a basic inspection in our company, the oil has been changed and for the moment it is operational.

Condition: used, mileage: 425,893 km, power: 206 kW (280.08 HP), first registration: 02/2011, fuel type: diesel, color: brown, axle configuration: 4x2, tire size: 315/70R22.5, fuel: diesel, wheelbase: 3,550 mm, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: ABS, cruise control, spoiler, traction control, = Additional Options and Accessories = - Roof spoiler - Electric windows - Refrigerator - Sun visor = Remarks = Scania P280 First registration: 25-02-2011. Tedpfewahuiex Adnof In combination with: TRAVEL SUPREME INC First registration: 10-11-2006. Max weight: 9,000 kg. Trailer is used as a mobile training room. 2 x slide outs. Toilet. Kitchen. Stove. Ovens. Fridge. Heater. = Further Information = Tire size: 315/70R22.5 Brakes: Disc brakes Front axle: Steered; Tire tread left: 75%; Tire tread right: 75%; Suspension: Leaf suspension Rear axle: Twin tires; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80%; Suspension: Air suspension Unladen weight: 7,470 kg Payload: 1,530 kg Gross vehicle weight: 9,000 kg Dimensions (L x W): 579 x 255 cm Type number: P 280 + trailer - 2 X SLIDE OUT = Company Information = ALL PRICES ARE NET EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We make every effort to provide accurate information, but no rights may be derived from the texts provided.

Condition: like new (used), Motor power: 5.5 kW Tjdpfoxcvgvox Adnsf Briquette diameter: 60 mm Sawdust level sensor Operating hours: 1611 h Hopper diameter: 1000 mm Year of manufacture: 1998 CE marking

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 12,000 mm, total width: 1,250 mm, year of last overhaul: 2025, wheel diameter: 1,250 mm, Equipment: cabin, EXCELLENT CONDITION, REASON FOR SALE: RENEWAL. Production since 2020 approx. 5,000 m³. Horizontal sawmill carriage WRAVOR WRC 1250 with solid flywheels, reinforced 17m chassis for 12m cutting length. Loading deck to feed the carriage and 8m roller outfeed conveyor: both items also available as options. Hydraulic equipment (log clamps, log turners, and centering devices), separate control station, SIEMENS + WRAVOR cutting program, joysticks. Sawdust extraction/discharge system from the head along the entire chassis via overhead piping and hydraulic arms. The length of the sawmill carriage is adapted to the maximum log length (with an additional device on the chassis). Solid construction, using top-profile and special durable material for long service life. * Rapid log centering system in the middle of the frame with hydraulic arms or hydraulic centering devices (moveable left-right, up-down). * Hydraulic twin-cylinder grab axes move up/down, left/right and secure the log at multiple points, irrespective of log shape. * Hydraulic rollers—move up/down (individually or all together) and rotate—for leveling the log on the carriage, advancing/retracting the log, and transporting the final board/beam from the sawmill to the outfeed conveyor (or alternative direction). Tsdpfx Aovr Enlsdnsf * Hydraulic generator power supply—three supply options, with or without frequency converter. Head movement by cable (optional): more robust, precise, and easy cable replacement in case of fraying. All mechanization and loading solutions available ON REQUEST.

Condition: new, Year of construction: 2025, The most powerful centrifugal fan FAN5500 reaches a capacity of up to 8000m3/h. The high vacuum created by the blade system at the right angle and the high motor power can cope with the toughest jobs.Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been created. The design of a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air Tsdpfx Adevughlensf local exhaust ventilation drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 8000 m3/h inlet diameter 300 mm discharge diameter 250 mm ENGINE SPEED 2850 rpm DIMENSIONS 670 x 600 x 600 mm MOTOR POWER / VOLTAGE 5.5 kW/400 V WEIGHT 55 kg

Condition: new, Year of construction: 2024, functionality: fully functional, power: 132 kW (179.47 HP), input frequency: 50 Hz, Equipment: CE marking, air conditioning, Brand new, unused pellet press, year of manufacture 2024!\n\nTECHNICAL DETAILS\n\nRaw material processing: grass, rice husks, wood sawdust, biomass, straw, cotton stalks\nOutput: 1,500 – 2,000 kg/h\nPellet diameter: 6 – 12 mm\n\nMACHINE DETAILS\n\nMain motor power: 132 kW\nVoltage: 3 phase, 380 V, 50 Hz\n\nDimensions & Weight\nDimensions (L x W x H): 2,600 x 1,300 x 2,300 mm\nWeight: 4,500 kg\n\nEQUIPMENT\nFully automatic control cabinet\nAir conditioning\nAutomatic bearing lubrication system\nRoller and new ring die (6 mm) for sawdust\nCE & ISO certification Tsdsxclitepfx Adnef

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Tjdowhui Aspfx Adnef Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2025, The centrifugal fan allows for operation with increased vacuum power to extract various types of pollutants, thanks to a special blade system which has been profiled at an appropriate angle. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Tedpfxjvugg Us Adnsf Thanks to the many years of experience of our CORMAK team, radial fans of the FAN series were created. Designing a new technological line allowed us to create the LineWind metal turbine system. This is the most important feature of the centrifugal fans, enabling them to extract all kinds of pollutants with increased vacuum power thanks to a special blade system that has been profiled at the right angle. The centrifugal fan was developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Radial fans are used for: transport of shavings, sawdust, small granulates dusty air local exhaust ventilation drying systems dehumidifiers Multi-vane metal rotor! High efficiency ensured by a balanced impeller Thermal winding protection (thermal sensor). The extraction design has been enhanced with additional anti-vibration feet in the base to guarantee a stable and vibration-free operation of the unit. An emergency shutdown button meets the requirements of the PN-EN ISO 12100 and PN-EN ISO 13850 standards. An additional advantage is the use of branded flexible and resistant seals in sensitive areas, allowing high vacuums to be achieved without losses at individual connection points. Reliability confirmed by Polish users who enjoy working with our machines every day. Technical specifications MAX. AIR CAPACITY 4000 m3/h inlet diameter 200 mm discharge diameter 180 mm ENGINE SPEED 2850 rpm DIMENSIONS 575 x 550 x 500 mm MOTOR POWER / VOLTAGE 2,2 kW / 400 V WEIGHT 35,5 kg

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Tjdpfxewhui Ne Adnjf Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2025, The fan, created on the basis of a radial impeller blade system, is designed for handling waste generated during wood processing. The high vacuum and high motor power ensure a constant underpressure. Thanks to the many years of experience of our CORMAK team, FAN series radial fans were created. The design of the new technological line has allowed us to create a LineWind metal turbine system. This is the most important feature of radial fans, allowing with increased vacuum power to draw off various types of pollutions to a special blade system that has been profiled at the right angle. The radial fan was created for use in the carpentry, furniture, car, agricultural and manufacturing industries. Advantages: radial fans are using for: - transport of shavings, sawdust, small granules - dusty air - local exhaust - drying systems - air dryers multi-blade, balanced, low noise and high efficiency, metal rotor winding overload thermal protection (thermal sensor) anti-vibration, stabilising feet safety swith conformant withthe N-EN ISO 12100 and PN-EN ISO 13850 norms it is also includes flexible and durable gaskets in the most vital locations failure-free operation confirmed by users of our machines working with them every day CAPACITY MAX. 3000 m3/h INLET DIAMETER 150 mm OUTLET DIAMETER 150 mm Tsdpfovuggbex Adnef ROTATIONS 2850 obr/min DIMENSIONS 575 x 510 x 500 mm MOTOR POWER/VOLTAGE 1,5 kW/400 V WEIGHT 32,5 kg

Condition: new, Year of construction: 2025, Thanks to the many years of experience of our CORMAK team, radial fans from the FAN series have been developed. The most powerful centrifugal fan FAN7,5 reaches a capacity of up to 10562 m3/h. The radial fan has been developed for use in the carpentry, furniture, automotive, agricultural and manufacturing industries. Product characteristics: The Radial Fan can transport air whirl sawdust dust and other substances such as smoke or harmless gases. It is widely used for ventilation in industrial lumber companies, carpentry, mining, large buildings, hotels, restaurants, etc. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. Tedsvugrdopfx Adnef The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of chips, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 10562 m3/h inlet diameter 340 mm outlet diameter 350 mm PRESSURE 2554 - 1673 Pa DIMENSIONS 810x900x980 mm MOTOR POWER / VOLTAGE 7.5 kW WEIGHT 125 kg

Condition: new, Year of construction: 2025, The PS12E-3000 format saw is a professional carpentry tool that stands out for its powerful specification and its ability to perform large-scale precision cuts. This advanced circular saw has been developed for a variety of woodworking tasks and is the ideal tool for demanding users. The main features of the saw, the PS12E-3000 wood panel saw: Two cutting discs: The saw is equipped with two cutting discs - a main disc and an undercutting disc - which provides ample cutting capacity for different types of wood materials. Large format table: One of the main advantages of this model is the extra-wide, bearing-mounted format table with support, which allows precise processing of large-format chipboard up to almost 3,000mm long and other large-sized wood materials. Additional undercutter: The additional undercutting blade makes the saw ideal for cutting furniture board and particleboard, eliminating the risk of splintering and ensuring an even cut. Disc inclination: The cutting disc can be tilted from 90° to 45° Maximum bar length: This saw is fitted with a bar of an impressive length of 2,300 mm Disc replacement: The replacement process is quick and efficient, thanks to the ability to remove the metal top and unscrew the blade. Saw blade guard: The saw has an effective saw blade guard, which can also be connected to the extraction system to help keep the work area clean. Powerful motor: The saw blades are driven by a powerful 3.8 kW, 400V motor, which guarantees smooth operation and efficient cuts. Control panel: The machine's control panel is located on the underside of the saw and includes an emergency stop, a knob for angle cuts (45°) and a knob for blade height adjustment with a locking mechanism. Additional measuring instruments: All guides are equipped with length and cutting angle scales, allowing the required angle and length to be quickly set without the need for additional measurements. Extraction compatibility: The saw is suitable for connection to a sawdust and chip extraction system with a suction nozzle diameter of 100 mm, which contributes to keeping the workplace clean. Application of the saw, format saw for wood: Tedovugc Ajpfx Adnof The PS12E-3000 format saw is an advanced tool that combines durability, precision and performance, making it the ideal choice for professional woodworkers and everyday woodworkers. Its versatile capabilities and advanced features allow it to handle a wide variety of woodworking projects and tasks in both industrial and craft settings. DIMENSIONS OF THE MOVING TABLE 3000 x 270 mm MAIN TABLE DIMENSIONS 800 x 385 mm SIDE AUXILIARY TABLE DIMENSIONS 880 x 800 mm BAND WIDTH 1220 mm SAW TILT 0-45° CUTTING HEIGHT AT 90° 100 mm CUTTING HEIGHT AT 45° 80 mm MAXIMUM SAW SIZE 315 mm MAXIMUM Blade size 100 mm MAIN SAW RPM 4000 rpm CUTTING SAW RPM 5800 rpm POWER OF ENGINE S6 5,3 kW / 7,1 hp POWER OF ENGINE S1 3,8 kW / 5,1 hp 400 V POWER SUPPLY WEIGHT 309 kg

Condition: new, Year of construction: 2025, The PS12E-2000 format saw is a professional carpentry tool that stands out for its versatility and advanced features. This circular saw has been designed for a wide variety of woodworking tasks, offering both precision cutting of narrow and thin boards and handling thick wood tops with a maximum thickness of up to 100mm. The main features of the saw, the PS12E-2000 wood panel saw: Two cutting discs: the saw is equipped with two cutting discs - a main disc and an undercutting disc, providing versatile cutting capabilities for different types of wood materials. MDF undercutter: An additional undercutter has been fitted to the machine, allowing precise cutting of MDF and other wood materials with a similar structure. Blade height adjustment: offers infinitely variable height adjustment of the cutting saw up to 100 mm, allowing it to be adapted to different material thicknesses. Disc inclination: The cutting disc can be tilted from 90° to 45° Solid guideways: The machine has solid guideways with scales, both longitudinal (steel) and angular Tsdpfxovuf Tmo Adnsf Additional format table: the large bearing-mounted format table with support is one of the main advantages of this saw. This makes it possible to process large format boards and materials with a large surface area. Sawdust discharge system: The woodworking machine is equipped with a sawdust discharge pipe system, which helps keep the work area clean. Easy disc change: The replacement process is quick and efficient, allowing you to work efficiently. Side guide with graduation: fitted with a side guide with accurate graduation, which facilitates serial cuts of the same length. Saw blade guard: the saw has a saw blade guard that can additionally be connected to the extraction system, which guarantees safety and cleanliness in the working area. Technical data: Length of the format table [mm] 2000 Cutting width right side [mm] 1260 Swing of saw blade [°] 45 Cutting height at 45° [mm] 80 Cutting height when using circular saw blade 315 90° [mm] 100 Cutting height with saw blade set to 300 90° [mm] 95 Maximum dimension of saw blade [mm] 315 x 30 Maximum dimension of undercut [mm] 100 x 20 RPM of main saw [U/min] 4500 Bowl speed [U/min] 5800 Motor power S1/S6 3.8 kW / 6.1 hp Power supply 3 phases, 400 V Weight [kg] 275 Warranty [months] 12