Suitcase

Scania P 280 + trailer - 2 X SLIDE OUT / CAMPER / WOHN...

Condition: excellent (used), 5-axis combined machine (thickness planer, jointer, mortiser, saw, and router) Thickness planer: Usable width: 310 mm Usable height: 230 mm Cutter block: 3 planer knives Joint planer: Usable width: 310 mm Table length: 1400 mm Shaft diameter: 70 mm Router: Spindle diameter: 30 mm, length: 125 mm Table width: 800 mm Router stop Saw: Saw blade diameter: 250 mm, pivotable by 45°. Cutting height with 250 mm blade: 80 mm Table width: 800 mm Rip fence length: 635 mm Ljdpfxewh U Eqj Ad Nehb Mortise drilling machine: Mortise milling from (0 to 16 mm) Power and motors Voltage: 380 V Connection: Three-phase Location: From stock, 54634 Bitburg - Available immediately -

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Lodpfx Adet Hwq Rs Nehb Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: new, empty load weight: 1,100 kg, maximum load weight: 2,400 kg, overall weight: 3,500 kg, loading space length: 5,000 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, tire size: 195/50r13c, *Car trailer box trailer* C1000 from Cheval Liberte / Debon. Large volume, attractive design, aerodynamic front, composite plastic walls, aluminum floor and polyester roof are combined in this box. Hardly any other car box trailer has such excellent handling as this one! The box trailer is equipped with the Pullman2 chassis, an in-house development by ChevalLiberte. A low loading height of just 45 cm, independent suspension with trailing arms, coil springs and shock absorbers to automotive standards ensure optimum driving characteristics*. The *flat drive-on angle* is ideal for loading with *a car*. A *drive-on ramp* with additional fold-out *drive-on rails* and a particularly low chassis that allows even low vehicles to be loaded. The extensive standard equipment on the *car trailer* includes a *poly roof* with *poly front* in one piece, *composite plastic walls*, *aluminium floor*, two *side doors*, two side flaps, cable winch, perforated profile stand rails, *folding door system*, *100 km/h*, *interior light*, *automatic support wheel*, *towing eyes*, manoeuvring handle, *stable frame and a V-drawbar. Lhedpfek S Ecijx Ad Nsb We offer inexpensive accessories for box trailers such as motorcycle rocker, stand rail, motorcycle straps, lashing rails, lashing straps, rear supports and lashing eyes*. The body is splash-proof.

Condition: new, The UWF 5 is a state-of-the-art universal milling machine that falls under the category of Conventional Vertical Milling Machines and is part of the Universal Milling Machines product group. This top model in the UWF series boasts a large work area of 1325 x 360 mm and supports a table load capacity of up to 500 kg, making it ideal for both repair shops and production departments. Constructed with a robust machine bed from high-strength HT-200 cast iron and precision-ground guideways, it ensures long-term accuracy and wear resistance. The universal cutter head can swivel on two planes, allowing for quick changes between horizontal and vertical machining, while the powerful servo axis motor enables finely stepped motorized feeds in all axes. Additionally, the 5.5 kW main drive guarantees high torque, significantly enhancing productivity and offering features like a 3-axis position indicator and a user-friendly control panel. With extensive standard equipment, including a coolant system and tool storage, the UWF 5 is built for ease of use and maintenance-free operation. For those interested in enhancing their machining capabilities, request a quote for this impressive milling machine today. Lhjdpfep Aucwsx Ad Njb

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp Lhedpfx Adjqx Sz Ds Neb

Condition: used, power: 35 kW (47.59 HP), Year of construction: 2010, operating hours: 2,259 h, Equipment: all wheel drive, cabin, front linkage, * Right-hand drive * Front linkage Lsdpfxevhuwze Ad Nshb * Trailer coupling * All-wheel drive * All-wheel steering ----Internal vehicle number 9160-----Subject to errors and prior sale WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, power capacity / kW volt 480 V ampere 5,5 A total power requirement 3,45 kW Ljdsiianiepfx Ad Nshb Siemens Motor Neu Typ: 1LE10231AA435AB4-Z

Condition: used, mileage: 208,261 km, power: 120 kW (163.15 HP), first registration: 12/2015, fuel type: diesel, overall weight: 3,800 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 4, Equipment: air conditioning, central locking, soot filter, !!!! WITHOUT CARRIER !!!!! Lodpfxsu H Sv Aj Ad Nehb 3+6 seats, power steering, driver airbag, automatic, tachometer, power steering, electric windows, on-board computer, xenon headlights, air conditioning, air connections, power connections, shelves available, central locking + radio remote control, fog lights, rear air suspension, air conditioning in the rear area, air connections, wheelbase: 3,665mm etc. Errors + prior sale + typos reserved. Only sold to businesses and export. !!!! Fg-7107 !!!! Key no. 92 !!!!! Test drive to TÜV, Dekra or Mercedes possible !!!!!

Condition: good (used), Unique crawler tractor. Own weight 1,495 kg. 4WD, 26 hp, 3-cylinder. Tyres can also be fitted; comes on tracks only. Trade-in possible. €13,500 excl. VAT. Lhodsxxvrwjpfx Ad Neb

Condition: new, empty load weight: 490 kg, maximum load weight: 810 kg, overall weight: 1,300 kg, loading space length: 3,100 mm, loading space width: 1,650 mm, loading space height: 1,950 mm, tire size: 185/70R13, Roadstar 400 tandem box trailer from Cheval Liberte / Debon. Attractive design, aerodynamic front, aluminum walls, aluminum floor and polyester roof are combined in this case. Hardly any other car trailer has such excellent handling as this one! The aluminum box trailer is equipped with the Pullman2 chassis, which was developed by Cheval Liberte itself. The low loading height of just 35 cm and the independent wheel suspension with trailing arm, coil spring and shock absorber to automotive standards ensure optimum driving characteristics. The flat drive-on angle is ideal for loading motorcycles and quad bikes. The drive-on ramp of the poly box trailer, which can also be opened as a door for easy loading of pallets and other goods, is outstanding. Lhodpfx Adjrxu T Io Nsb The extensive standard equipment of the car trailer includes a poly roof and poly front in one piece, aluminum walls, aluminum floor, side door, folding door system, 100km/h, interior light, automatic support wheel, lashing eyes, stable frame and a V-drawbar. Useful box trailer accessories such as motorcycle rocker, stand rail, motorcycle straps, lashing straps, rear supports and lashing eyes are also available. The body is splash-proof.