Used Saw Panel for sale (16,636)

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Chodpfstk It Ssx Ab Tef Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, Circular panel saw Manufacturer: Griggio Model: CA40 Year: 2001 Chjdpow Nww Dsfx Ab Tef Country of manufacture: Italy

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 731, feed length X-axis: 3,800 mm, cutting length (max.): 3,800 mm, cutting height with scoring (max.): 100 mm, saw blade diameter: 380 mm, cutting height (max.): 100 mm, cutting width (max.): 3,800 mm, feed rate X-axis: 70 m/min, main saw diameter: 380 mm, total height: 1,650 mm, overall weight: 4,500 kg, travel distance X-axis: 3,800 mm, workpiece weight (max.): 80 kg, extraction nozzle diameter: 120 mm, input frequency: 50 Hz, input current: 35 A, input voltage: 400 V, compressed air connection: 6 bar, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, air pressure: 6 bar, saw blade bore: 80 mm, Equipment: scorer, The saw is regularly serviced and in perfect working order. It is in daily operation on a single shift. Sale due to transition to a newer production system. Still functional, it can be seen in operation until October 10, 2025. Also supplied with a set of saw blades and a pre-cutter. Option to purchase a vacuum board lifter, which can be seen in the video. Chodpfoxf Im Tox Ab Tof

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 021.06.440, cutting length (max.): 4,400 mm, main saw diameter: 380 mm, controller model: G-DRIVEAXS BASIC, working height: 1,050 mm, Equipment: scorer, TECHNICAL DETAILS Cutting length: 4,400 mm Cross-cutting machine width: 1,525 mm Saw blade protrusion: 105 mm Main blade diameter: 380 mm Chedpfxsxf Eg Dj Ab Tjf Scoring blade diameter: 180 mm Lift table dimensions: 4,400 mm × 1,600 mm Working height: 1,050 mm Minimum book height: 10 mm Minimum thickness when loading: 10 mm Minimum panel size when loading: 2,440 mm × 1,220 mm Maximum panel size when loading: 4,200 mm × 1,600 mm Maximum gripper opening: 110 mm Number of grippers for longitudinal stop: 5 Number of grippers for cross stop: 8 Feed speed of saw carriage: 5 to 100 m/min Feed speed of pushers: 1 to 40 m/min Return speed of pushers: 60 m/min MACHINE DETAILS Control system: G-DRIVEAXS BASIC Main motor output: 18 Hp 13.2 kW Number of front aligners (longitudinal area): 3 Number of side aligners (crosswise, lower): 2 Number of side aligners on pressure beam: 2 EQUIPMENT Left-hand configuration Side conveyor belt for loading

Condition: reconditioned (used), cutting dimensions 4200 mm x 2200 mm Blade diameter 250 mm cutting thickness 60 mm Codew Ug Aaspfx Ab Tohf

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Adjustable speed of the saw carriage (m/min) 6 - 150 Cedjt Ah Nispfx Ab Tehf Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: new, Year of construction: 2025, New Machine Cedpfjw Tfxwjx Ab Tshf Year of manufacture: 2025 Equipment and technical specifications: - Base unit: Vertical panel saw SECTOR 1257, cutting height 2200 mm x cutting length 5300 mm - PowerPackage 400V incl. TRK extraction system, SuperCut scoring unit, digital vertical readout, stepless speed control (9 kW power) - Strip stop for repeat horizontal cuts, millimeter scale, max. strip height 650 mm - Alignment laser - Cut optimization package incl. touchscreen on operator panel Availability: Short-term Location: Flörsheim

Condition: used, Panel saw Manufacturer: Holz-Her Model: 1265 Year: 1989 Technical specifications Working dimensions Cutting dimensions (mm) Length x Height 3300/4300 / 5300 x 1900 4300 / 5300 x 2070 4300 / 5300 x 2200 Trimming height = max. Cutting height - 65 mm Cutting depth (mm): 45 (50) Cutting depth depends on the workpiece Dimensions in brackets without Super Cut Saw unit Motor power: 3 kW, 400 V, 50 Hz Saw blade diameter (mm): 220 Saw blade speed (min) at 50 Hz: 5450 Extraction Air consumption (m/h): 2000 Air speed (m/s): 20 Chsdpfx Aew I A Dyob Tjf Connection (mm): 160 Machine dimensions Floor area Length (mm): 4315 / 5315 / 6315 Depth (mm): 1420 Height (mm): 2500 / 2640 / 2775 Weight (kg): approx. 760 (5300 x 2200mm) Gross weight (kg): approx. 990 (5300 x 2200 mm)

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, saw blade diameter: 315 mm, space requirement length: 6,000 mm, total height: 2,600 mm, Standing panel saw Striebig, type 6220, wall-mounted, condition very good Csdpsxc Uf Rsfx Ab Tohf

Condition: new, Year of construction: 2025, Brand new vertical panel saw for manual cutting of sheet materials. All easily machinable materials such as solid wood panels, laminated wood panels, formwork panels, and all wood-based materials such as MDF, fiberboard, and particleboard can be cut and divided by sawing. Maximum cutting area: 4,200 mm x height 2,200 mm Maximum horizontal cutting height: 2,070 mm Manual saw unit rotation Chodpfx Aboxc T T Te Tef Maximum panel thickness that can be cut: 60 mm Saw motor drive power: 4.5 kW Saw blade diameter: 250 mm Compressed air requirement: 7 to 8 bar Dimensions approx. 5,300 mm x 1,500 mm x H 2,690 mm Weight approx. 700 kg Optional equipment available: scoring unit, angle cutting device, chip extraction system, etc.

Condition: new, Year of construction: 2025, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Technical Specifications Max. cutting length: 3270 mm Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Main saw blade: Ø380 mm (shaft Ø60 mm) Codpfxoxcwwpo Ab Tshf Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: new, NEW CAR Power Control Numerical Control with NX Cut System Software and NX Pareto optimizer Barcode labeler with software Cutting length mm 3800 Cutting width mm 3800 Blade protrusion mm 90 Front panel loading and unloading Automatic lateral aligner positioned in the blade carriage Chjdperufznefx Ab Tef N° 1 fixed front table in bakelite with air curtain system for unloading the panels N° 2 mobile front tables in bakelite with air curtain system for unloading the panels Main blade, max diameter 380 mm, 15 kW motor Scoring blade, max diameter 200 mm Blade carriage speed forward 1 - 90 m/min. - backward 120 m/min. Pusher speed 85 m/min. Pusher carriage with 9 pincers

Condition: used, Used Machine Used Holz-Her Type 1211 Vertical Panel Saw Older model; only suitable for rough rip cutting MNo.: 360726 Technical Specifications: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Max. saw blade diameter 300 mm Motor power 4 kW Chjdewka Ngspfx Ab Tsf Availability: Short term Location: Röllbach

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Cedpfxjw Nx A Ij Ab Tshf Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: used, Felder KF700S/03 panel saw-milling machine, year of manufacture 2006, good condition, including folding device for feed and tenon hood, 5.5 kW S6, 3200 mm panel table length, 3500,6500,8000,10,000 rpm, 780 kg Prices subject to change, errors, printing and typesetting errors reserved Chjdpfx Abjwzzh Se Tjf

Condition: used, functionality: fully functional, – robust construction TECHNICAL SPECIFICATIONS: – max. cutting width: 3050 mm – min. cutting width: 450 mm – max. cutting height: 125 mm – saw blade diameter – three cutting units – each cutting unit adjustable independently: 500 mm – motor power: 3 x 4 kW – feed motor power: 1.5 kW – two feed speeds – material hold-down Codpow Nau Sofx Ab Tshf – loading magazine for boards – transport dimensions (L/W/H): 620 / 200 / 120 cm – weight: ~ 800 kg

Condition: used, Year of construction: 2010, functionality: fully functional, Complete Automatic System Beam Saw Giben Prisma 3000 , Cutting 3800 + Systraplan , Professional Stacking and destacking System , Complete line , 24m * 10 m , 2 places for loadin palets by forklift , Capacity about 20-25 palet places , * 5 palets in one place, about 100 pallets , Speed 120m/min longitudinal , 80 m/min * short side , Load capacity of the vacuum system 500 kg , Chodpfx Aov H Ufveb Tof More pictures and videos avilable ,

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions Chjdpeuc Idxofx Ab Tof blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow roof tooth Chedpfx Asw I U D Eob Tsf Saw blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal saw cuts: -via scale from 0 - 2,070 mm -via strip cutting stop from 75 - 500 mm Measurement readout for vertical saw cuts: -via scale from 0 - 1,300 mm Extraction ports: 1 x 100 mm, 1 x 120 mm Features: -ADVANCE clamping system, consisting of 2 pneumatic clamping tongs that can be motor-driven up and down on vertical axes with a ball screw spindle. The clamps support panels up to 150 kg. -Torsion-resistant, free-standing machine frame -Round bar guides, vertical and horizontal -Pneumatically retractable slatted frame -Finely adjustable folding stop with stop extension -Fine adjustment for horizontal saw cuts via handwheel -Strip cutting stop -Manual programming rail with 5 T-slots -Pneumatic plunge for the saw unit -25 material support rollers -1 infeed and 1 outfeed roller -Pneumatic workpiece clamping device between support rollers -3 center support elements, pneumatically extendable -Pneumatic saw head lock -Operator panel with document holder -Control unit on saw assembly: start button, stop button -Tool cabinet -Scale illumination for vertical saw cuts Partnership Edition features: -Digital display for folding stop -Digital display for saw unit with incremental function -Pneumatically tiltable saw unit -Scoring system with controlled counter-air nozzle, numerical display for scoring or groove depth adjustment, and activation indicator -5.5 kW motor including star-delta starter -Cutting line laser Availability: short-term Location: Hochheim

Condition: new, Year of construction: 2024, TECHNICAL DETAILS: -Max. length of horizontal cut :mm 4200 -Max. length of vertical cut :mm 4200 -Max. height of cut :mm 2200 -Max. height of horizontal cut :mm 2080 -Max. depth of cut :mm 60 -Motor output :HP 5 (3.7 KW) Chedoq Rvymepfx Ab Tsf -Blade diameter :mm 250 -Blade speed :rpm 5300 -Manual shifting frame, with visual reminders. -N° 4 positioners for horizontal cuttings. -N°1 Stop for vertical cuttings. -Short piece cutting device (L. 2340 mm), to support small panels. -Lift-up Rollers. -SELF-BRAKING motor. -V.400/3/50Hz. - pre-arranged for independent dust extraction -All standard accessories: safety device, soundproofing, set service tools, user’s manual. Optionel (not included in the price) Electronic Vertical measuring display Euro 1000,00 Optionel (not included in the price) Electronic Horizontal measuring display Euro 1000,00 ( not installed on the machine )

Condition: used, Year of construction: 1985, functionality: fully functional, cutting length (max.): 5,100 mm, cutting height (max.): 2,150 mm, power: 3 kW (4.08 HP), Machine in very good condition, as shown in the pictures. Cedpfx Abow Upzrs Tohf Mains connection: 380V Rated current: 14.7A Saw unit power: 3kW Speed: 2830/5490 rpm

Condition: used, functionality: fully functional, - After technical inspection - Condition: very good - Saw for longitudinal cutting, trimming, and shortening of wood or boards. TECHNICAL SPECIFICATIONS: - Saw blade diameter: 400 mm - Cutting height: 80 mm - Min. cutting width between 1st and 2nd saw: 700 mm - Max. cutting width between 1st and 3rd saw: 1900 mm Codpfxjw Iqfxj Ab Tehf - Cutting width between 2nd and 3rd saw: 1200 mm - Carriage length: 1500 mm - Main motor: 2 x 4 kW - Saw blade height adjustment - Outlet diameter: 2 x 100 mm - Dimensions (L/W/H): 300 x 130 x 110 cm - Weight: ~ 700 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0-341-07-8718, feed length X-axis: 3,800 mm, feed length Y-axis: 3,800 mm, feed length Z-axis: 85 mm, cutting length (max.): 3,800 mm, cutting height with scoring (max.): 85 mm, saw blade diameter: 420 mm, power: 14 kW (19.03 HP), For Sale: HOLZMA HPP 250/38/38 Beam Saw Year of manufacture: 2013 Model: Optimat HPP 250/38/38 Cutting dimensions: 3800 mm x 3800 mm Cedpfx Asw Ud Rueb Tshf Condition: very good, used in single-shift operation Maintenance: regularly serviced Equipment: PICA 2 label printer Without optimization software CutRite Power supply: 400V / 50Hz, 3-phase Maximum operating full load current: 26.8 A Control voltage: 24V The machine is in excellent working condition, immediately available, and can be inspected under power.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 372/1-606, Brand: Holz-Her Model: CUT1254 Machine no.: 372/1-606 Year of manufacture: 2016 Stock no: 2002582 Tech. info: Working dimensions Cutting depth: 60 mm Cutting length: 4300 mm Cutting height: Max. height of workpiece 2200 mm (cutting height 2110 mm) Saw unit Motor power: 4 kW Saw blade diameter: 250 mm Saw blade speed at 50 Hz: 5450 rpm Dust extraction Csdpfx Asw Udz Hsb Tehf Air requirement 1400 m3 /h Air speed 20 m/sec Connection diameter for accessories 120 mm Connection diameter for frame ends (TRK version) 100 mm Static vacuum 1100 Pa Weight (kg) 1200

Condition: used, Year of construction: 1991, cutting length: 4300mm cutting height: 2100mm cutting depht: 80mm scoring unit: nein Codpfow H Iqdjx Ab Tehf feed: manuell read out horicontal cut: Scala read out vertical cut: Scala sawblade diameter: 300mm movable material support: ja Sawblade speed: ca. 4000 U/min motor power: 4 kW machine length: 6500mm machine depth: 1500mm machine height: 2800 mm weight: 800kg